/**
* Uses 'cursor' and 'request' to fill out 'nextBatch' with the batch of result documents to
* be returned by this getMore.
*
* Returns the number of documents in the batch in *numResults, which must be initialized to
* zero by the caller. Returns the final ExecState returned by the cursor in *state.
*
* Returns an OK status if the batch was successfully generated, and a non-OK status if the
* PlanExecutor encounters a failure.
*/
Status generateBatch(ClientCursor* cursor,
const GetMoreRequest& request,
BSONArrayBuilder* nextBatch,
PlanExecutor::ExecState* state,
int* numResults) {
PlanExecutor* exec = cursor->getExecutor();
const bool isAwaitData = isCursorAwaitData(cursor);
// If an awaitData getMore is killed during this process due to our max time expiring at
// an interrupt point, we just continue as normal and return rather than reporting a
// timeout to the user.
BSONObj obj;
try {
while (PlanExecutor::ADVANCED == (*state = exec->getNext(&obj, NULL))) {
// If adding this object will cause us to exceed the BSON size limit, then we
// stash it for later.
if (nextBatch->len() + obj.objsize() > BSONObjMaxUserSize && *numResults > 0) {
exec->enqueue(obj);
break;
}
// Add result to output buffer.
nextBatch->append(obj);
(*numResults)++;
if (enoughForGetMore(request.batchSize.value_or(0),
*numResults, nextBatch->len())) {
break;
}
}
}
catch (const UserException& except) {
if (isAwaitData && except.getCode() == ErrorCodes::ExceededTimeLimit) {
// We ignore exceptions from interrupt points due to max time expiry for
// awaitData cursors.
}
else {
throw;
}
}
if (PlanExecutor::FAILURE == *state) {
const std::unique_ptr<PlanStageStats> stats(exec->getStats());
error() << "GetMore executor error, stats: " << Explain::statsToBSON(*stats);
return Status(ErrorCodes::OperationFailed,
str::stream() << "GetMore executor error: "
<< WorkingSetCommon::toStatusString(obj));
}
else if (PlanExecutor::DEAD == *state) {
return Status(ErrorCodes::OperationFailed,
str::stream() << "Plan executor killed during getMore command, "
<< "ns: " << request.nss.ns());
}
return Status::OK();
}
/**
* Called by db/instance.cpp. This is the getMore entry point.
*
* pass - when QueryOption_AwaitData is in use, the caller will make repeated calls
* when this method returns an empty result, incrementing pass on each call.
* Thus, pass == 0 indicates this is the first "attempt" before any 'awaiting'.
*/
QueryResult::View getMore(OperationContext* txn,
const char* ns,
int ntoreturn,
long long cursorid,
CurOp& curop,
int pass,
bool& exhaust,
bool* isCursorAuthorized) {
// For testing, we may want to fail if we receive a getmore.
if (MONGO_FAIL_POINT(failReceivedGetmore)) {
invariant(0);
}
exhaust = false;
const NamespaceString nss(ns);
// Depending on the type of cursor being operated on, we hold locks for the whole getMore,
// or none of the getMore, or part of the getMore. The three cases in detail:
//
// 1) Normal cursor: we lock with "ctx" and hold it for the whole getMore.
// 2) Cursor owned by global cursor manager: we don't lock anything. These cursors don't
// own any collection state.
// 3) Agg cursor: we lock with "ctx", then release, then relock with "unpinDBLock" and
// "unpinCollLock". This is because agg cursors handle locking internally (hence the
// release), but the pin and unpin of the cursor must occur under the collection lock.
// We don't use our AutoGetCollectionForRead "ctx" to relock, because
// AutoGetCollectionForRead checks the sharding version (and we want the relock for the
// unpin to succeed even if the sharding version has changed).
//
// Note that we declare our locks before our ClientCursorPin, in order to ensure that the
// pin's destructor is called before the lock destructors (so that the unpin occurs under
// the lock).
boost::scoped_ptr<AutoGetCollectionForRead> ctx;
boost::scoped_ptr<Lock::DBLock> unpinDBLock;
boost::scoped_ptr<Lock::CollectionLock> unpinCollLock;
CursorManager* cursorManager;
CursorManager* globalCursorManager = CursorManager::getGlobalCursorManager();
if (globalCursorManager->ownsCursorId(cursorid)) {
cursorManager = globalCursorManager;
}
else {
ctx.reset(new AutoGetCollectionForRead(txn, nss));
Collection* collection = ctx->getCollection();
uassert( 17356, "collection dropped between getMore calls", collection );
cursorManager = collection->getCursorManager();
}
LOG(5) << "Running getMore, cursorid: " << cursorid << endl;
// This checks to make sure the operation is allowed on a replicated node. Since we are not
// passing in a query object (necessary to check SlaveOK query option), the only state where
// reads are allowed is PRIMARY (or master in master/slave). This function uasserts if
// reads are not okay.
Status status = repl::getGlobalReplicationCoordinator()->checkCanServeReadsFor(
txn,
nss,
true);
uassertStatusOK(status);
// A pin performs a CC lookup and if there is a CC, increments the CC's pin value so it
// doesn't time out. Also informs ClientCursor that there is somebody actively holding the
// CC, so don't delete it.
ClientCursorPin ccPin(cursorManager, cursorid);
ClientCursor* cc = ccPin.c();
// If we're not being called from DBDirectClient we want to associate the RecoveryUnit
// used to create the execution machinery inside the cursor with our OperationContext.
// If we throw or otherwise exit this method in a disorderly fashion, we must ensure
// that further calls to getMore won't fail, and that the provided OperationContext
// has a valid RecoveryUnit. As such, we use RAII to accomplish this.
//
// This must be destroyed before the ClientCursor is destroyed.
std::auto_ptr<ScopedRecoveryUnitSwapper> ruSwapper;
// These are set in the QueryResult msg we return.
int resultFlags = ResultFlag_AwaitCapable;
int numResults = 0;
int startingResult = 0;
const int InitialBufSize =
512 + sizeof(QueryResult::Value) + MaxBytesToReturnToClientAtOnce;
BufBuilder bb(InitialBufSize);
bb.skip(sizeof(QueryResult::Value));
if (NULL == cc) {
cursorid = 0;
resultFlags = ResultFlag_CursorNotFound;
}
else {
// Check for spoofing of the ns such that it does not match the one originally
// there for the cursor.
uassert(ErrorCodes::Unauthorized,
str::stream() << "Requested getMore on namespace " << ns << ", but cursor "
<< cursorid << " belongs to namespace " << cc->ns(),
ns == cc->ns());
*isCursorAuthorized = true;
// Restore the RecoveryUnit if we need to.
if (txn->getClient()->isInDirectClient()) {
if (cc->hasRecoveryUnit())
invariant(txn->recoveryUnit() == cc->getUnownedRecoveryUnit());
}
else {
if (!cc->hasRecoveryUnit()) {
// Start using a new RecoveryUnit
cc->setOwnedRecoveryUnit(
getGlobalServiceContext()->getGlobalStorageEngine()->newRecoveryUnit());
}
// Swap RecoveryUnit(s) between the ClientCursor and OperationContext.
ruSwapper.reset(new ScopedRecoveryUnitSwapper(cc, txn));
}
// Reset timeout timer on the cursor since the cursor is still in use.
cc->setIdleTime(0);
// If the operation that spawned this cursor had a time limit set, apply leftover
// time to this getmore.
curop.setMaxTimeMicros(cc->getLeftoverMaxTimeMicros());
txn->checkForInterrupt(); // May trigger maxTimeAlwaysTimeOut fail point.
if (0 == pass) {
cc->updateSlaveLocation(txn);
}
if (cc->isAggCursor()) {
// Agg cursors handle their own locking internally.
ctx.reset(); // unlocks
}
// If we're replaying the oplog, we save the last time that we read.
Timestamp slaveReadTill;
// What number result are we starting at? Used to fill out the reply.
startingResult = cc->pos();
// What gives us results.
PlanExecutor* exec = cc->getExecutor();
const int queryOptions = cc->queryOptions();
// Get results out of the executor.
exec->restoreState(txn);
BSONObj obj;
PlanExecutor::ExecState state;
while (PlanExecutor::ADVANCED == (state = exec->getNext(&obj, NULL))) {
// Add result to output buffer.
bb.appendBuf((void*)obj.objdata(), obj.objsize());
// Count the result.
++numResults;
// Possibly note slave's position in the oplog.
if (queryOptions & QueryOption_OplogReplay) {
BSONElement e = obj["ts"];
if (Date == e.type() || bsonTimestamp == e.type()) {
slaveReadTill = e.timestamp();
}
}
if (enoughForGetMore(ntoreturn, numResults, bb.len())) {
break;
}
}
if (PlanExecutor::DEAD == state || PlanExecutor::FAILURE == state) {
// Propagate this error to caller.
if (PlanExecutor::FAILURE == state) {
scoped_ptr<PlanStageStats> stats(exec->getStats());
error() << "Plan executor error, stats: "
<< Explain::statsToBSON(*stats);
uasserted(17406, "getMore executor error: " +
WorkingSetCommon::toStatusString(obj));
}
// In the old system tailable capped cursors would be killed off at the
// cursorid level. If a tailable capped cursor is nuked the cursorid
// would vanish.
//
// In the new system they die and are cleaned up later (or time out).
// So this is where we get to remove the cursorid.
if (0 == numResults) {
resultFlags = ResultFlag_CursorNotFound;
}
}
const bool shouldSaveCursor =
shouldSaveCursorGetMore(state, exec, isCursorTailable(cc));
// In order to deregister a cursor, we need to be holding the DB + collection lock and
// if the cursor is aggregation, we release these locks.
if (cc->isAggCursor()) {
invariant(NULL == ctx.get());
unpinDBLock.reset(new Lock::DBLock(txn->lockState(), nss.db(), MODE_IS));
unpinCollLock.reset(new Lock::CollectionLock(txn->lockState(), nss.ns(), MODE_IS));
}
// Our two possible ClientCursorPin cleanup paths are:
// 1) If the cursor is not going to be saved, we call deleteUnderlying() on the pin.
// 2) If the cursor is going to be saved, we simply let the pin go out of scope. In
// this case, the pin's destructor will be invoked, which will call release() on the
// pin. Because our ClientCursorPin is declared after our lock is declared, this
// will happen under the lock.
if (!shouldSaveCursor) {
ruSwapper.reset();
ccPin.deleteUnderlying();
// cc is now invalid, as is the executor
cursorid = 0;
cc = NULL;
curop.debug().cursorExhausted = true;
LOG(5) << "getMore NOT saving client cursor, ended with state "
<< PlanExecutor::statestr(state)
<< endl;
}
else {
// Continue caching the ClientCursor.
cc->incPos(numResults);
exec->saveState();
LOG(5) << "getMore saving client cursor ended with state "
<< PlanExecutor::statestr(state)
<< endl;
if (PlanExecutor::IS_EOF == state && (queryOptions & QueryOption_CursorTailable)) {
if (!txn->getClient()->isInDirectClient()) {
// Don't stash the RU. Get a new one on the next getMore.
ruSwapper->dismiss();
}
if ((queryOptions & QueryOption_AwaitData)
&& (numResults == 0)
&& (pass < 1000)) {
// Bubble up to the AwaitData handling code in receivedGetMore which will
// try again.
return NULL;
}
}
// Possibly note slave's position in the oplog.
if ((queryOptions & QueryOption_OplogReplay) && !slaveReadTill.isNull()) {
cc->slaveReadTill(slaveReadTill);
}
exhaust = (queryOptions & QueryOption_Exhaust);
// If the getmore had a time limit, remaining time is "rolled over" back to the
// cursor (for use by future getmore ops).
cc->setLeftoverMaxTimeMicros( curop.getRemainingMaxTimeMicros() );
}
}
QueryResult::View qr = bb.buf();
qr.msgdata().setLen(bb.len());
qr.msgdata().setOperation(opReply);
qr.setResultFlags(resultFlags);
qr.setCursorId(cursorid);
qr.setStartingFrom(startingResult);
qr.setNReturned(numResults);
bb.decouple();
LOG(5) << "getMore returned " << numResults << " results\n";
return qr;
}
/**
* Generates the next batch of results for a ClientCursor.
*
* TODO: Do we need to support some equivalent of OP_REPLY responseFlags?
*
* TODO: Is it possible to support awaitData?
*/
bool run(OperationContext* txn,
const std::string& dbname,
BSONObj& cmdObj,
int options,
std::string& errmsg,
BSONObjBuilder& result) override {
// Counted as a getMore, not as a command.
globalOpCounters.gotGetMore();
if (txn->getClient()->isInDirectClient()) {
return appendCommandStatus(result,
Status(ErrorCodes::IllegalOperation,
"Cannot run getMore command from eval()"));
}
StatusWith<GetMoreRequest> parseStatus = GetMoreRequest::parseFromBSON(dbname, cmdObj);
if (!parseStatus.isOK()) {
return appendCommandStatus(result, parseStatus.getStatus());
}
const GetMoreRequest& request = parseStatus.getValue();
// Depending on the type of cursor being operated on, we hold locks for the whole
// getMore, or none of the getMore, or part of the getMore. The three cases in detail:
//
// 1) Normal cursor: we lock with "ctx" and hold it for the whole getMore.
// 2) Cursor owned by global cursor manager: we don't lock anything. These cursors
// don't own any collection state.
// 3) Agg cursor: we lock with "ctx", then release, then relock with "unpinDBLock" and
// "unpinCollLock". This is because agg cursors handle locking internally (hence the
// release), but the pin and unpin of the cursor must occur under the collection
// lock. We don't use our AutoGetCollectionForRead "ctx" to relock, because
// AutoGetCollectionForRead checks the sharding version (and we want the relock for
// the unpin to succeed even if the sharding version has changed).
//
// Note that we declare our locks before our ClientCursorPin, in order to ensure that
// the pin's destructor is called before the lock destructors (so that the unpin occurs
// under the lock).
std::unique_ptr<AutoGetCollectionForRead> ctx;
std::unique_ptr<Lock::DBLock> unpinDBLock;
std::unique_ptr<Lock::CollectionLock> unpinCollLock;
CursorManager* cursorManager;
CursorManager* globalCursorManager = CursorManager::getGlobalCursorManager();
if (globalCursorManager->ownsCursorId(request.cursorid)) {
cursorManager = globalCursorManager;
}
else {
ctx.reset(new AutoGetCollectionForRead(txn, request.nss));
Collection* collection = ctx->getCollection();
if (!collection) {
return appendCommandStatus(result,
Status(ErrorCodes::OperationFailed,
"collection dropped between getMore calls"));
}
cursorManager = collection->getCursorManager();
}
ClientCursorPin ccPin(cursorManager, request.cursorid);
ClientCursor* cursor = ccPin.c();
if (!cursor) {
// We didn't find the cursor.
return appendCommandStatus(result, Status(ErrorCodes::CursorNotFound, str::stream()
<< "Cursor not found, cursor id: " << request.cursorid));
}
if (request.nss.ns() != cursor->ns()) {
return appendCommandStatus(result, Status(ErrorCodes::Unauthorized, str::stream()
<< "Requested getMore on namespace '" << request.nss.ns()
<< "', but cursor belongs to a different namespace"));
}
// On early return, get rid of the the cursor.
ScopeGuard cursorFreer = MakeGuard(&ClientCursorPin::deleteUnderlying, ccPin);
if (!cursor->hasRecoveryUnit()) {
// Start using a new RecoveryUnit.
cursor->setOwnedRecoveryUnit(
getGlobalServiceContext()->getGlobalStorageEngine()->newRecoveryUnit());
}
// Swap RecoveryUnit(s) between the ClientCursor and OperationContext.
ScopedRecoveryUnitSwapper ruSwapper(cursor, txn);
// Reset timeout timer on the cursor since the cursor is still in use.
cursor->setIdleTime(0);
// If the operation that spawned this cursor had a time limit set, apply leftover
// time to this getmore.
txn->getCurOp()->setMaxTimeMicros(cursor->getLeftoverMaxTimeMicros());
txn->checkForInterrupt(); // May trigger maxTimeAlwaysTimeOut fail point.
if (cursor->isAggCursor()) {
// Agg cursors handle their own locking internally.
ctx.reset(); // unlocks
}
PlanExecutor* exec = cursor->getExecutor();
exec->restoreState(txn);
// TODO: Handle result sets larger than 16MB.
BSONArrayBuilder nextBatch;
BSONObj obj;
PlanExecutor::ExecState state;
int numResults = 0;
while (PlanExecutor::ADVANCED == (state = exec->getNext(&obj, NULL))) {
// Add result to output buffer.
nextBatch.append(obj);
numResults++;
if (enoughForGetMore(request.batchSize, numResults, nextBatch.len())) {
break;
}
}
// If we are operating on an aggregation cursor, then we dropped our collection lock
// earlier and need to reacquire it in order to clean up our ClientCursorPin.
//
// TODO: We need to ensure that this relock happens if we release the pin above in
// response to PlanExecutor::getNext() throwing an exception.
if (cursor->isAggCursor()) {
invariant(NULL == ctx.get());
unpinDBLock.reset(new Lock::DBLock(txn->lockState(), request.nss.db(), MODE_IS));
unpinCollLock.reset(
new Lock::CollectionLock(txn->lockState(), request.nss.ns(), MODE_IS));
}
// Fail the command if the PlanExecutor reports execution failure.
if (PlanExecutor::FAILURE == state) {
const std::unique_ptr<PlanStageStats> stats(exec->getStats());
error() << "GetMore executor error, stats: " << Explain::statsToBSON(*stats);
return appendCommandStatus(result,
Status(ErrorCodes::OperationFailed,
str::stream() << "GetMore executor error: "
<< WorkingSetCommon::toStatusString(obj)));
}
CursorId respondWithId = 0;
if (shouldSaveCursorGetMore(state, exec, isCursorTailable(cursor))) {
respondWithId = request.cursorid;
exec->saveState();
cursor->setLeftoverMaxTimeMicros(txn->getCurOp()->getRemainingMaxTimeMicros());
cursor->incPos(numResults);
if (isCursorTailable(cursor) && state == PlanExecutor::IS_EOF) {
// Rather than swapping their existing RU into the client cursor, tailable
// cursors should get a new recovery unit.
ruSwapper.dismiss();
}
}
else {
txn->getCurOp()->debug().cursorExhausted = true;
}
appendGetMoreResponseObject(respondWithId, request.nss.ns(), nextBatch.arr(), &result);
if (respondWithId) {
cursorFreer.Dismiss();
}
return true;
}
