int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
ulong *setup_start, ulong *setup_len)
{
int noffset;
ulong addr;
ulong len;
int ret;
addr = map_to_sysmem(images->fit_hdr_os);
noffset = fit_get_node_from_config(images, FIT_SETUP_PROP, addr);
if (noffset < 0)
return noffset;
ret = fit_image_load(images, addr, NULL, NULL, arch,
IH_TYPE_X86_SETUP, BOOTSTAGE_ID_FIT_SETUP_START,
FIT_LOAD_REQUIRED, setup_start, &len);
return ret;
}
/**
* boot_get_fdt - main fdt handling routine
* @argc: command argument count
* @argv: command argument list
* @arch: architecture (IH_ARCH_...)
* @images: pointer to the bootm images structure
* @of_flat_tree: pointer to a char* variable, will hold fdt start address
* @of_size: pointer to a ulong variable, will hold fdt length
*
* boot_get_fdt() is responsible for finding a valid flat device tree image.
* Curently supported are the following ramdisk sources:
* - multicomponent kernel/ramdisk image,
* - commandline provided address of decicated ramdisk image.
*
* returns:
* 0, if fdt image was found and valid, or skipped
* of_flat_tree and of_size are set to fdt start address and length if
* fdt image is found and valid
*
* 1, if fdt image is found but corrupted
* of_flat_tree and of_size are set to 0 if no fdt exists
*/
int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
{
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
const image_header_t *fdt_hdr;
ulong load, load_end;
ulong image_start, image_data, image_end;
#endif
ulong fdt_addr;
char *fdt_blob = NULL;
void *buf;
#if CONFIG_IS_ENABLED(FIT)
const char *fit_uname_config = images->fit_uname_cfg;
const char *fit_uname_fdt = NULL;
ulong default_addr;
int fdt_noffset;
#endif
const char *select = NULL;
int ok_no_fdt = 0;
*of_flat_tree = NULL;
*of_size = 0;
if (argc > 2)
select = argv[2];
if (select || genimg_has_config(images)) {
#if CONFIG_IS_ENABLED(FIT)
if (select) {
/*
* If the FDT blob comes from the FIT image and the
* FIT image address is omitted in the command line
* argument, try to use ramdisk or os FIT image
* address or default load address.
*/
if (images->fit_uname_rd)
default_addr = (ulong)images->fit_hdr_rd;
else if (images->fit_uname_os)
default_addr = (ulong)images->fit_hdr_os;
else
default_addr = load_addr;
if (fit_parse_conf(select, default_addr,
&fdt_addr, &fit_uname_config)) {
debug("* fdt: config '%s' from image at 0x%08lx\n",
fit_uname_config, fdt_addr);
} else if (fit_parse_subimage(select, default_addr,
&fdt_addr, &fit_uname_fdt)) {
debug("* fdt: subimage '%s' from image at 0x%08lx\n",
fit_uname_fdt, fdt_addr);
} else
#endif
{
fdt_addr = simple_strtoul(select, NULL, 16);
debug("* fdt: cmdline image address = 0x%08lx\n",
fdt_addr);
}
#if CONFIG_IS_ENABLED(FIT)
} else {
/* use FIT configuration provided in first bootm
* command argument
*/
fdt_addr = map_to_sysmem(images->fit_hdr_os);
fdt_noffset = fit_get_node_from_config(images,
FIT_FDT_PROP,
fdt_addr);
if (fdt_noffset == -ENOLINK)
return 0;
else if (fdt_noffset < 0)
return 1;
}
#endif
debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
fdt_addr);
/* copy from dataflash if needed */
fdt_addr = genimg_get_image(fdt_addr);
/*
* Check if there is an FDT image at the
* address provided in the second bootm argument
* check image type, for FIT images get a FIT node.
*/
buf = map_sysmem(fdt_addr, 0);
switch (genimg_get_format(buf)) {
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
case IMAGE_FORMAT_LEGACY:
/* verify fdt_addr points to a valid image header */
printf("## Flattened Device Tree from Legacy Image at %08lx\n",
fdt_addr);
fdt_hdr = image_get_fdt(fdt_addr);
if (!fdt_hdr)
goto no_fdt;
/*
* move image data to the load address,
* make sure we don't overwrite initial image
*/
image_start = (ulong)fdt_hdr;
image_data = (ulong)image_get_data(fdt_hdr);
image_end = image_get_image_end(fdt_hdr);
load = image_get_load(fdt_hdr);
load_end = load + image_get_data_size(fdt_hdr);
if (load == image_start ||
load == image_data) {
fdt_addr = load;
break;
}
if ((load < image_end) && (load_end > image_start)) {
fdt_error("fdt overwritten");
goto error;
}
debug(" Loading FDT from 0x%08lx to 0x%08lx\n",
image_data, load);
memmove((void *)load,
(void *)image_data,
image_get_data_size(fdt_hdr));
fdt_addr = load;
break;
#endif
case IMAGE_FORMAT_FIT:
/*
* This case will catch both: new uImage format
* (libfdt based) and raw FDT blob (also libfdt
* based).
*/
#if CONFIG_IS_ENABLED(FIT)
/* check FDT blob vs FIT blob */
if (fit_check_format(buf)) {
ulong load, len;
fdt_noffset = fit_image_load(images,
fdt_addr, &fit_uname_fdt,
&fit_uname_config,
arch, IH_TYPE_FLATDT,
BOOTSTAGE_ID_FIT_FDT_START,
FIT_LOAD_OPTIONAL, &load, &len);
images->fit_hdr_fdt = map_sysmem(fdt_addr, 0);
images->fit_uname_fdt = fit_uname_fdt;
images->fit_noffset_fdt = fdt_noffset;
fdt_addr = load;
break;
} else
#endif
{
/*
* FDT blob
*/
debug("* fdt: raw FDT blob\n");
printf("## Flattened Device Tree blob at %08lx\n",
(long)fdt_addr);
}
break;
default:
puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
goto no_fdt;
}
printf(" Booting using the fdt blob at %#08lx\n", fdt_addr);
fdt_blob = map_sysmem(fdt_addr, 0);
} else if (images->legacy_hdr_valid &&
image_check_type(&images->legacy_hdr_os_copy,
IH_TYPE_MULTI)) {
ulong fdt_data, fdt_len;
/*
* Now check if we have a legacy multi-component image,
* get second entry data start address and len.
*/
printf("## Flattened Device Tree from multi component Image at %08lX\n",
(ulong)images->legacy_hdr_os);
image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data,
&fdt_len);
if (fdt_len) {
fdt_blob = (char *)fdt_data;
printf(" Booting using the fdt at 0x%p\n", fdt_blob);
if (fdt_check_header(fdt_blob) != 0) {
fdt_error("image is not a fdt");
goto error;
}
if (fdt_totalsize(fdt_blob) != fdt_len) {
fdt_error("fdt size != image size");
goto error;
}
} else {
debug("## No Flattened Device Tree\n");
goto no_fdt;
}
} else {
debug("## No Flattened Device Tree\n");
goto no_fdt;
}
*of_flat_tree = fdt_blob;
*of_size = fdt_totalsize(fdt_blob);
debug(" of_flat_tree at 0x%08lx size 0x%08lx\n",
(ulong)*of_flat_tree, *of_size);
return 0;
no_fdt:
ok_no_fdt = 1;
error:
*of_flat_tree = NULL;
*of_size = 0;
if (!select && ok_no_fdt) {
debug("Continuing to boot without FDT\n");
return 0;
}
return 1;
}
/**
* boot_get_ramdisk - main ramdisk handling routine
* @argc: command argument count
* @argv: command argument list
* @images: pointer to the bootm images structure
* @arch: expected ramdisk architecture
* @rd_start: pointer to a ulong variable, will hold ramdisk start address
* @rd_end: pointer to a ulong variable, will hold ramdisk end
*
* boot_get_ramdisk() is responsible for finding a valid ramdisk image.
* Curently supported are the following ramdisk sources:
* - multicomponent kernel/ramdisk image,
* - commandline provided address of decicated ramdisk image.
*
* returns:
* 0, if ramdisk image was found and valid, or skiped
* rd_start and rd_end are set to ramdisk start/end addresses if
* ramdisk image is found and valid
*
* 1, if ramdisk image is found but corrupted, or invalid
* rd_start and rd_end are set to 0 if no ramdisk exists
*/
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end)
{
ulong rd_addr, rd_load;
ulong rd_data, rd_len;
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
const image_header_t *rd_hdr;
#endif
void *buf;
#ifdef CONFIG_SUPPORT_RAW_INITRD
char *end;
#endif
#if defined(CONFIG_FIT)
const char *fit_uname_config = images->fit_uname_cfg;
const char *fit_uname_ramdisk = NULL;
ulong default_addr;
int rd_noffset;
#endif
const char *select = NULL;
*rd_start = 0;
*rd_end = 0;
if (argc >= 2)
select = argv[1];
/*
* Look for a '-' which indicates to ignore the
* ramdisk argument
*/
if (select && strcmp(select, "-") == 0) {
debug("## Skipping init Ramdisk\n");
rd_len = rd_data = 0;
} else if (select || genimg_has_config(images)) {
#if defined(CONFIG_FIT)
if (select) {
/*
* If the init ramdisk comes from the FIT image and
* the FIT image address is omitted in the command
* line argument, try to use os FIT image address or
* default load address.
*/
if (images->fit_uname_os)
default_addr = (ulong)images->fit_hdr_os;
else
default_addr = load_addr;
if (fit_parse_conf(select, default_addr,
&rd_addr, &fit_uname_config)) {
debug("* ramdisk: config '%s' from image at "
"0x%08lx\n",
fit_uname_config, rd_addr);
} else if (fit_parse_subimage(select, default_addr,
&rd_addr, &fit_uname_ramdisk)) {
debug("* ramdisk: subimage '%s' from image at "
"0x%08lx\n",
fit_uname_ramdisk, rd_addr);
} else
#endif
{
rd_addr = simple_strtoul(select, NULL, 16);
debug("* ramdisk: cmdline image address = "
"0x%08lx\n",
rd_addr);
}
#if defined(CONFIG_FIT)
} else {
/* use FIT configuration provided in first bootm
* command argument. If the property is not defined,
* quit silently.
*/
rd_addr = map_to_sysmem(images->fit_hdr_os);
rd_noffset = fit_get_node_from_config(images,
FIT_RAMDISK_PROP, rd_addr);
if (rd_noffset == -ENOLINK)
return 0;
else if (rd_noffset < 0)
return 1;
}
#endif
/* copy from dataflash if needed */
rd_addr = genimg_get_image(rd_addr);
/*
* Check if there is an initrd image at the
* address provided in the second bootm argument
* check image type, for FIT images get FIT node.
*/
buf = map_sysmem(rd_addr, 0);
switch (genimg_get_format(buf)) {
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
case IMAGE_FORMAT_LEGACY:
printf("## Loading init Ramdisk from Legacy "
"Image at %08lx ...\n", rd_addr);
bootstage_mark(BOOTSTAGE_ID_CHECK_RAMDISK);
rd_hdr = image_get_ramdisk(rd_addr, arch,
images->verify);
if (rd_hdr == NULL)
return 1;
rd_data = image_get_data(rd_hdr);
rd_len = image_get_data_size(rd_hdr);
rd_load = image_get_load(rd_hdr);
break;
#endif
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
rd_noffset = fit_image_load(images,
rd_addr, &fit_uname_ramdisk,
&fit_uname_config, arch,
IH_TYPE_RAMDISK,
BOOTSTAGE_ID_FIT_RD_START,
FIT_LOAD_IGNORED, &rd_data, &rd_len);
if (rd_noffset < 0)
return 1;
images->fit_hdr_rd = map_sysmem(rd_addr, 0);
images->fit_uname_rd = fit_uname_ramdisk;
images->fit_noffset_rd = rd_noffset;
break;
#endif
default:
#ifdef CONFIG_SUPPORT_RAW_INITRD
end = NULL;
if (select)
end = strchr(select, ':');
if (end) {
rd_len = simple_strtoul(++end, NULL, 16);
rd_data = rd_addr;
} else
#endif
{
puts("Wrong Ramdisk Image Format\n");
rd_data = rd_len = rd_load = 0;
return 1;
}
}
} else if (images->legacy_hdr_valid &&
image_check_type(&images->legacy_hdr_os_copy,
IH_TYPE_MULTI)) {
/*
* Now check if we have a legacy mult-component image,
* get second entry data start address and len.
*/
bootstage_mark(BOOTSTAGE_ID_RAMDISK);
printf("## Loading init Ramdisk from multi component "
"Legacy Image at %08lx ...\n",
(ulong)images->legacy_hdr_os);
image_multi_getimg(images->legacy_hdr_os, 1, &rd_data, &rd_len);
}
#ifdef CONFIG_ANDROID_BOOT_IMAGE
else if ((genimg_get_format(images) == IMAGE_FORMAT_ANDROID) &&
(!android_image_get_ramdisk((void *)images->os.start,
&rd_data, &rd_len))) {
/* empty */
}
#endif
else {
/*
* no initrd image
*/
bootstage_mark(BOOTSTAGE_ID_NO_RAMDISK);
rd_len = rd_data = 0;
}
if (!rd_data) {
debug("## No init Ramdisk\n");
} else {
*rd_start = rd_data;
*rd_end = rd_data + rd_len;
}
debug(" ramdisk start = 0x%08lx, ramdisk end = 0x%08lx\n",
*rd_start, *rd_end);
return 0;
}
