static int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bootm_headers_t images;
if (bootz_start(cmdtp, flag, argc, argv, &images))
return 1;
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
disable_interrupts();
#ifdef CONFIG_NETCONSOLE
/* Stop the ethernet stack if NetConsole could have left it up */
eth_halt();
#endif
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
#ifdef CONFIG_SBOOT
bootm_sboot();
#endif
#ifdef CONFIG_SILENT_CONSOLE
fixup_silent_linux();
#endif
arch_preboot_os();
do_bootm_linux(0, argc, argv, &images);
#ifdef DEBUG
puts("\n## Control returned to monitor - resetting...\n");
#endif
do_reset(cmdtp, flag, argc, argv);
return 1;
}
static int boot_selected_os(int argc, char * const argv[], int state,
bootm_headers_t *images, boot_os_fn *boot_fn)
{
if (images->os.type == IH_TYPE_STANDALONE) {
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(argc, argv);
return 0;
}
#ifdef CONFIG_SILENT_CONSOLE
if (images->os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
arch_preboot_os();
boot_fn(state, argc, argv, images);
if (state == BOOTM_STATE_OS_FAKE_GO) /* We expect to return */
return 0;
bootstage_error(BOOTSTAGE_ID_BOOT_OS_RETURNED);
#ifdef DEBUG
puts("\n## Control returned to monitor - resetting...\n");
#endif
return BOOTM_ERR_RESET;
}
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong iflag;
ulong load_end = 0;
int ret;
boot_os_fn *boot_fn;
/* relocate boot function table */
if (!relocated) {
int i;
for (i = 0; i < ARRAY_SIZE(boot_os); i++)
if (boot_os[i] != NULL)
boot_os[i] += gd->reloc_off;
relocated = 1;
}
/* determine if we have a sub command */
if (argc > 1) {
char *endp;
simple_strtoul(argv[1], &endp, 16);
/* endp pointing to NULL means that argv[1] was just a
* valid number, pass it along to the normal bootm processing
*
* If endp is ':' or '#' assume a FIT identifier so pass
* along for normal processing.
*
* Right now we assume the first arg should never be '-'
*/
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
if (bootm_start(cmdtp, flag, argc, argv))
return 1;
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
#ifdef CONFIG_AMIGAONEG3SE
/*
* We've possible left the caches enabled during
* bios emulation, so turn them off again
*/
icache_disable();
dcache_disable();
#endif
ret = bootm_load_os(images.os, &load_end, 1);
if (ret < 0) {
if (ret == BOOTM_ERR_RESET)
do_reset (cmdtp, flag, argc, argv);
if (ret == BOOTM_ERR_OVERLAP) {
if (images.legacy_hdr_valid) {
if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
puts ("WARNING: legacy format multi component "
"image overwritten\n");
} else {
puts ("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
show_boot_progress (-113);
do_reset (cmdtp, flag, argc, argv);
}
}
if (ret == BOOTM_ERR_UNIMPLEMENTED) {
if (iflag)
enable_interrupts();
show_boot_progress (-7);
return 1;
}
}
lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
if (images.os.type == IH_TYPE_STANDALONE) {
if (iflag)
enable_interrupts();
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(iflag, argc, argv);
return 0;
}
show_boot_progress (8);
#ifdef CONFIG_SILENT_CONSOLE
if (images.os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
boot_fn = boot_os[images.os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf ("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images.os.os), images.os.os);
show_boot_progress (-8);
return 1;
}
boot_fn(0, argc, argv, &images);
show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
#endif
do_reset (cmdtp, flag, argc, argv);
return 1;
}
int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong iflag;
ulong load_end = 0;
int ret;
boot_os_fn *boot_fn;
#ifdef CONFIG_NEEDS_MANUAL_RELOC
static int relocated = 0;
if (!relocated) {
int i;
/* relocate boot function table */
for (i = 0; i < ARRAY_SIZE(boot_os); i++)
if (boot_os[i] != NULL)
boot_os[i] += gd->reloc_off;
/* relocate names of sub-command table */
for (i = 0; i < ARRAY_SIZE(cmd_bootm_sub); i++)
cmd_bootm_sub[i].name += gd->reloc_off;
relocated = 1;
}
#endif
/* determine if we have a sub command */
if (argc > 1) {
char *endp;
simple_strtoul(argv[1], &endp, 16);
/* endp pointing to NULL means that argv[1] was just a
* valid number, pass it along to the normal bootm processing
*
* If endp is ':' or '#' assume a FIT identifier so pass
* along for normal processing.
*
* Right now we assume the first arg should never be '-'
*/
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
if (bootm_start(cmdtp, flag, argc, argv))
return 1;
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#ifdef CONFIG_NETCONSOLE
/* Stop the ethernet stack if NetConsole could have left it up */
eth_halt();
#endif
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
ret = bootm_load_os(images.os, &load_end, 1);
if (ret < 0) {
if (ret == BOOTM_ERR_RESET)
do_reset(cmdtp, flag, argc, argv);
if (ret == BOOTM_ERR_OVERLAP) {
if (images.legacy_hdr_valid) {
image_header_t *hdr;
hdr = &images.legacy_hdr_os_copy;
if (image_get_type(hdr) == IH_TYPE_MULTI)
puts("WARNING: legacy format multi "
"component image "
"overwritten\n");
} else {
puts("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
bootstage_error(BOOTSTAGE_ID_OVERWRITTEN);
do_reset(cmdtp, flag, argc, argv);
}
}
if (ret == BOOTM_ERR_UNIMPLEMENTED) {
if (iflag)
enable_interrupts();
bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
return 1;
}
}
lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
if (images.os.type == IH_TYPE_STANDALONE) {
if (iflag)
enable_interrupts();
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(iflag, argc, argv);
return 0;
}
bootstage_mark(BOOTSTAGE_ID_CHECK_BOOT_OS);
#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
if (images.os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
boot_fn = boot_os[images.os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images.os.os), images.os.os);
bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
return 1;
}
arch_preboot_os();
boot_fn(0, argc, argv, &images);
bootstage_error(BOOTSTAGE_ID_BOOT_OS_RETURNED);
#ifdef DEBUG
puts("\n## Control returned to monitor - resetting...\n");
#endif
do_reset(cmdtp, flag, argc, argv);
return 1;
}
/**
* Execute selected states of the bootm command.
*
* Note the arguments to this state must be the first argument, Any 'bootm'
* or sub-command arguments must have already been taken.
*
* Note that if states contains more than one flag it MUST contain
* BOOTM_STATE_START, since this handles and consumes the command line args.
*
* Also note that aside from boot_os_fn functions and bootm_load_os no other
* functions we store the return value of in 'ret' may use a negative return
* value, without special handling.
*
* @param cmdtp Pointer to bootm command table entry
* @param flag Command flags (CMD_FLAG_...)
* @param argc Number of subcommand arguments (0 = no arguments)
* @param argv Arguments
* @param states Mask containing states to run (BOOTM_STATE_...)
* @param images Image header information
* @param boot_progress 1 to show boot progress, 0 to not do this
* @return 0 if ok, something else on error. Some errors will cause this
* function to perform a reboot! If states contains BOOTM_STATE_OS_GO
* then the intent is to boot an OS, so this function will not return
* unless the image type is standalone.
*/
static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[], int states, bootm_headers_t *images,
int boot_progress)
{
boot_os_fn *boot_fn;
ulong iflag = 0;
int ret = 0, need_boot_fn;
images->state |= states;
/*
* Work through the states and see how far we get. We stop on
* any error.
*/
if (states & BOOTM_STATE_START)
ret = bootm_start(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOS))
ret = bootm_find_os(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOTHER)) {
ret = bootm_find_other(cmdtp, flag, argc, argv);
argc = 0; /* consume the args */
}
/* Load the OS */
if (!ret && (states & BOOTM_STATE_LOADOS)) {
ulong load_end;
iflag = bootm_disable_interrupts();
ret = bootm_load_os(images, &load_end, 0);
if (ret == 0)
lmb_reserve(&images->lmb, images->os.load,
(load_end - images->os.load));
else if (ret && ret != BOOTM_ERR_OVERLAP)
goto err;
else if (ret == BOOTM_ERR_OVERLAP)
ret = 0;
#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
if (images->os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
}
/* Relocate the ramdisk */
#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
if (!ret && (states & BOOTM_STATE_RAMDISK)) {
ulong rd_len = images->rd_end - images->rd_start;
ret = boot_ramdisk_high(&images->lmb, images->rd_start,
rd_len, &images->initrd_start, &images->initrd_end);
if (!ret) {
setenv_hex("initrd_start", images->initrd_start);
setenv_hex("initrd_end", images->initrd_end);
}
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
if (!ret && (states & BOOTM_STATE_FDT)) {
boot_fdt_add_mem_rsv_regions(&images->lmb, images->ft_addr);
ret = boot_relocate_fdt(&images->lmb, &images->ft_addr,
&images->ft_len);
}
#endif
/* From now on, we need the OS boot function */
if (ret)
return ret;
boot_fn = boot_os[images->os.os];
need_boot_fn = states & (BOOTM_STATE_OS_CMDLINE |
BOOTM_STATE_OS_BD_T | BOOTM_STATE_OS_PREP |
BOOTM_STATE_OS_FAKE_GO | BOOTM_STATE_OS_GO);
if (boot_fn == NULL && need_boot_fn) {
if (iflag)
enable_interrupts();
printf("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images->os.os), images->os.os);
bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
return 1;
}
/* Call various other states that are not generally used */
if (!ret && (states & BOOTM_STATE_OS_CMDLINE))
ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_BD_T))
ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_PREP))
ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, images);
#ifdef CONFIG_TRACE
/* Pretend to run the OS, then run a user command */
if (!ret && (states & BOOTM_STATE_OS_FAKE_GO)) {
char *cmd_list = getenv("fakegocmd");
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_FAKE_GO,
images, boot_fn);
if (!ret && cmd_list)
ret = run_command_list(cmd_list, -1, flag);
}
#endif
/* Check for unsupported subcommand. */
if (ret) {
puts("subcommand not supported\n");
return ret;
}
/* Now run the OS! We hope this doesn't return */
if (!ret && (states & BOOTM_STATE_OS_GO))
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_GO,
images, boot_fn);
/* Deal with any fallout */
err:
if (iflag)
enable_interrupts();
if (ret == BOOTM_ERR_UNIMPLEMENTED)
bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
else if (ret == BOOTM_ERR_RESET)
do_reset(cmdtp, flag, argc, argv);
return ret;
}
int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
ulong addr, data, len;
uint unc_len = CFG_BOOTM_LEN;
int i;
image_header_t *hdr = &header;
#ifdef CONFIG_TPLINK_IMAGE_HEADER
tplink_image_header_t *fileTag;
#endif
if(argc < 2){
addr = load_addr;
} else {
addr = simple_strtoul(argv[1], NULL, 16);
}
printf("Booting image at: 0x%08lX\n", addr);
#ifndef CONFIG_TPLINK_IMAGE_HEADER
memmove(&header, (char *)addr, sizeof(image_header_t));
print_image_hdr(hdr);
data = addr + sizeof(image_header_t);
#else
fileTag = (tplink_image_header_t *)addr;
print_image_hdr(fileTag);
fake_image_header(hdr, fileTag);
data = addr + TAG_LEN;
#endif /* !CONFIG_TPLINK_IMAGE_HEADER */
len = ntohl(hdr->ih_size);
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
#ifdef CONFIG_NETCONSOLE
/*
* Stop the ethernet stack if NetConsole could have
* left it up
*/
eth_halt();
#endif
/* TODO: should we flush caches for kernel? */
/*
* Flush everything, restore caches for linux
*/
//mips_cache_flush();
//mips_icache_flush_ix();
/* XXX - this causes problems when booting from flash */
/* dcache_disable(); */
/* case IH_COMP_LZMA:*/
puts("Uncompressing kernel image... ");
i = lzma_inflate((unsigned char *)data, len, (unsigned char*)ntohl(hdr->ih_load), (int *)&unc_len);
if(i != LZMA_RESULT_OK){
printf("## Error: LZMA error num: %d\n", i);
return(-1);
}
puts("OK!\n");
#ifdef CONFIG_SILENT_CONSOLE
fixup_silent_linux();
#endif
do_bootm_linux(cmdtp, flag, argc, argv);
#ifdef DEBUG
puts("\n## Error: control returned to monitor - resetting...\n");
do_reset(cmdtp, flag, argc, argv);
#endif
return(1);
}
int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *s;
u32 *len_ptr;
u32 addr, data, len;
int i, tpl_type, verify;
u32 unc_len = CFG_BOOTM_LEN;
image_header_t *hdr = &header;
tplink_image_header_t *tpl_hdr;
/*
* By default don't verify data CRC checksum,
* but allow to enable it, using environment
**/
s = getenv("verify_data");
verify = (s && (*s == 'y')) ? 1 : 0;
if (argc < 2) {
addr = load_addr;
} else {
addr = simple_strtoul(argv[1], NULL, 16);
}
printf("Booting image from 0x%08lX...\n", addr);
/* Check what header type we have */
memmove(&data, (char *)addr, sizeof(u32));
tpl_type = 0;
switch (ntohl(data)) {
case TPL_IH_VERSION_V1:
tpl_type = 1;
tpl_hdr = (tplink_image_header_t *)addr;
print_tpl_ih_v1(tpl_hdr);
/* Convert to general format */
tpl_to_uboot_header(hdr, tpl_hdr);
break;
case IH_MAGIC:
print_uboot_ih((image_header_t *)addr);
memmove(&header, (char *)addr, sizeof(image_header_t));
break;
case TPL_IH_VERSION_V2:
case TPL_IH_VERSION_V3:
default:
puts("## Error: unsupported image header\n");
return 1;
}
/* Always verify header CRC */
if (ih_header_crc(hdr, tpl_type) != 0) {
puts("## Error: header checksum mismatch!\n");
return 1;
}
/* And data if enabled */
if (tpl_type) {
data = addr + sizeof(tplink_image_header_t);
} else {
data = addr + sizeof(image_header_t);
}
if (ih_data_crc(data, hdr, tpl_type, verify) != 0) {
puts("## Error: data checksum mismatch!\n");
return 1;
}
puts("\n");
len = ntohl(hdr->ih_size);
len_ptr = (u32 *)data;
/* We support only MIPS */
if (hdr->ih_arch != IH_CPU_MIPS) {
puts("## Error: unsupported architecture!\n");
return 1;
}
/* Image type... */
switch (hdr->ih_type) {
case IH_TYPE_KERNEL:
break;
case IH_TYPE_MULTI:
/* OS kernel is always in first image */
len = ntohl(len_ptr[0]);
data += 8;
/* Move over list to first image */
for (i = 1; len_ptr[i]; ++i)
data += 4;
break;
default:
puts("## Error: unsupported image type!\n");
return 1;
}
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
#ifdef CONFIG_NETCONSOLE
/*
* Stop the ethernet stack if NetConsole could have
* left it up
*/
puts("Stopping network... ");
eth_halt();
puts("OK!\n");
#endif
/* TODO: should we flush caches for kernel? */
/*
* Flush everything, restore caches for linux
*/
//mips_cache_flush();
//mips_icache_flush_ix();
/* XXX - this causes problems when booting from flash */
/* dcache_disable(); */
/* Compression type... */
switch (hdr->ih_comp) {
case IH_COMP_LZMA:
printf("Uncompressing %s... ", ih_img_type(hdr->ih_type));
/* Try to extract LZMA data... */
i = lzma_inflate((u8 *)data, len,
(u8 *)ntohl(hdr->ih_load), (int *)&unc_len);
/* TODO: more verbose LZMA errors */
if (i != LZMA_RESULT_OK) {
puts("ERROR\n");
printf("## Error: LZMA error '%d'!\n", i);
return 1;
}
puts("OK!\n");
break;
default:
printf("## Error: unsupported compression type '%s'!\n",
ih_comp_type(hdr->ih_comp));
return 1;
}
#ifdef CONFIG_SILENT_CONSOLE
fixup_silent_linux();
#endif
do_bootm_linux(cmdtp, flag, argc, argv);
return 1;
}
int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) {
//ulong iflag;
ulong addr;
ulong data, len;
ulong *len_ptr;
uint unc_len = CFG_BOOTM_LEN;
int i, verify = 0;
image_header_t *hdr = &header;
LINUX_FILE_TAG *fileTag; // by lqm, 17Sep07
if (argc < 2) {
addr = load_addr;
} else {
addr = simple_strtoul(argv[1], NULL, 16);
}
//SHOW_BOOT_PROGRESS (1);
printf("Booting image at: 0x%08lX...\n", addr);
fileTag = (LINUX_FILE_TAG *) addr;
/*
printf("---- fileTag = %08x\n", fileTag);
printf("\t text base = %08x\n", fileTag->kernelTextAddr);
printf("\t entry point = %08x\n", fileTag->kernelEntryPoint);
*/
fake_image_header(hdr, fileTag->kernelTextAddr, fileTag->kernelEntryPoint, fileTag->kernelLen);
data = addr + TAG_LEN;
len = ntohl(hdr->ih_size);
/* TODO: */
//SHOW_BOOT_PROGRESS (2);
//SHOW_BOOT_PROGRESS (6);
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
//iflag = disable_interrupts();
// TODO: disable_interrupts() only returns 0...
//disable_interrupts();
#ifdef CONFIG_AR7100
/*
* Flush everything, restore caches for linux
*/
mips_cache_flush();
/* XXX - this causes problems when booting from flash */
/* dcache_disable(); */
#endif
/* case IH_COMP_LZMA:*/
puts("Uncompressing kernel image...\n");
i = lzma_inflate((unsigned char *) data, len, (unsigned char*) ntohl(hdr->ih_load), (int *) &unc_len);
if (i != LZMA_RESULT_OK) {
//printf("## Error: LZMA error number %d\n", i);
//SHOW_BOOT_PROGRESS(-6);
//udelay(100000);
return -1;
//do_reset(cmdtp, flag, argc, argv);
}
puts("OK\n");
//SHOW_BOOT_PROGRESS(7);
/* case IH_OS_LINUX: */
#ifdef CONFIG_SILENT_CONSOLE
fixup_silent_linux();
#endif
do_bootm_linux(cmdtp, flag, argc, argv, addr, len_ptr, verify);
//SHOW_BOOT_PROGRESS(-9);
#ifdef DEBUG
puts ("\n## Error: control returned to monitor - resetting...\n");
do_reset (cmdtp, flag, argc, argv);
#endif
return 1;
}
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
image_header_t *hdr;
ulong addr;
ulong iflag;
const char *type_name;
uint unc_len = CONFIG_SYS_BOOTM_LEN;
uint8_t comp, type, os;
void *os_hdr;
ulong os_data, os_len;
ulong image_start, image_end;
ulong load_start, load_end;
ulong mem_start;
phys_size_t mem_size;
struct lmb lmb;
#if defined(CONFIG_SECURE_BOOT)
int rv;
#endif
#if defined(CONFIG_SECURE_BOOT)
rv = Check_Signature( (SecureBoot_CTX *)SECURE_BOOT_CONTEXT_ADDR,
(unsigned char*)CONFIG_SECURE_KERNEL_BASE,
CONFIG_SECURE_KERNEL_SIZE-128,
(unsigned char*)(CONFIG_SECURE_KERNEL_BASE+CONFIG_SECURE_KERNEL_SIZE-128),
128 );
if(rv != SB_OK) {
printf("Kernel Integrity check fail\nSystem Halt....");
while(1);
}
printf("Kernel Integirty check success.\n");
rv = Check_Signature( (SecureBoot_CTX *)SECURE_BOOT_CONTEXT_ADDR,
(unsigned char*)CONFIG_SECURE_ROOTFS_BASE,
CONFIG_SECURE_ROOTFS_SIZE-128,
(unsigned char*)(CONFIG_SECURE_ROOTFS_BASE+CONFIG_SECURE_ROOTFS_SIZE-128),
128 );
if(rv != SB_OK) {
printf("rootfs Integrity check fail\nSystem Halt....");
while(1);
}
printf("rootfs Integirty check success.\n");
#endif
memset ((void *)&images, 0, sizeof (images));
images.verify = getenv_yesno ("verify");
// images.lmb = &lmb;
memcpy (&images.lmb, &lmb, sizeof(struct lmb));
lmb_init(&lmb);
mem_start = getenv_bootm_low();
mem_size = getenv_bootm_size();
lmb_add(&lmb, (phys_addr_t)mem_start, mem_size);
board_lmb_reserve(&lmb);
#ifdef CONFIG_ZIMAGE_BOOT
#define LINUX_ZIMAGE_MAGIC 0x016f2818
/* find out kernel image address */
if (argc < 2) {
addr = load_addr;
debug ("* kernel: default image load address = 0x%08lx\n",
load_addr);
} else {
addr = simple_strtoul(argv[1], NULL, 16);
//debug ("* kernel: cmdline image address = 0x%08lx\n", img_addr);
}
if (*(ulong *)(addr + 9*4) == LINUX_ZIMAGE_MAGIC) {
printf("Boot with zImage\n");
addr = virt_to_phys(addr);
hdr = (image_header_t *)addr;
hdr->ih_os = IH_OS_LINUX;
hdr->ih_ep = ntohl(addr);
memmove (&images.legacy_hdr_os_copy, hdr, sizeof(image_header_t));
/* save pointer to image header */
images.legacy_hdr_os = hdr;
images.legacy_hdr_valid = 1;
goto after_header_check;
}
#endif
/* get kernel image header, start address and length */
os_hdr = boot_get_kernel (cmdtp, flag, argc, argv,
&images, &os_data, &os_len);
if (os_len == 0) {
puts ("ERROR: can't get kernel image!\n");
return 1;
}
/* get image parameters */
switch (genimg_get_format (os_hdr)) {
case IMAGE_FORMAT_LEGACY:
type = image_get_type (os_hdr);
comp = image_get_comp (os_hdr);
os = image_get_os (os_hdr);
image_end = image_get_image_end (os_hdr);
load_start = image_get_load (os_hdr);
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
if (fit_image_get_type (images.fit_hdr_os,
images.fit_noffset_os, &type)) {
puts ("Can't get image type!\n");
show_boot_progress (-109);
return 1;
}
if (fit_image_get_comp (images.fit_hdr_os,
images.fit_noffset_os, &comp)) {
puts ("Can't get image compression!\n");
show_boot_progress (-110);
return 1;
}
if (fit_image_get_os (images.fit_hdr_os,
images.fit_noffset_os, &os)) {
puts ("Can't get image OS!\n");
show_boot_progress (-111);
return 1;
}
image_end = fit_get_end (images.fit_hdr_os);
if (fit_image_get_load (images.fit_hdr_os, images.fit_noffset_os,
&load_start)) {
puts ("Can't get image load address!\n");
show_boot_progress (-112);
return 1;
}
break;
#endif
default:
puts ("ERROR: unknown image format type!\n");
return 1;
}
image_start = (ulong)os_hdr;
load_end = 0;
type_name = genimg_get_type_name (type);
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
#ifdef CONFIG_AMIGAONEG3SE
/*
* We've possible left the caches enabled during
* bios emulation, so turn them off again
*/
icache_disable();
invalidate_l1_instruction_cache();
flush_data_cache();
dcache_disable();
#endif
switch (comp) {
case IH_COMP_NONE:
if (load_start == (ulong)os_hdr) {
printf (" XIP %s ... ", type_name);
} else {
printf (" Loading %s ... ", type_name);
memmove_wd ((void *)load_start,
(void *)os_data, os_len, CHUNKSZ);
}
load_end = load_start + os_len;
puts("OK\n");
break;
case IH_COMP_GZIP:
printf (" Uncompressing %s ... ", type_name);
if (gunzip ((void *)load_start, unc_len,
(uchar *)os_data, &os_len) != 0) {
puts ("GUNZIP: uncompress or overwrite error "
"- must RESET board to recover\n");
show_boot_progress (-6);
do_reset (cmdtp, flag, argc, argv);
}
load_end = load_start + os_len;
break;
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf (" Uncompressing %s ... ", type_name);
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
int i = BZ2_bzBuffToBuffDecompress ((char*)load_start,
&unc_len, (char *)os_data, os_len,
CFG_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf ("BUNZIP2: uncompress or overwrite error %d "
"- must RESET board to recover\n", i);
show_boot_progress (-6);
do_reset (cmdtp, flag, argc, argv);
}
load_end = load_start + unc_len;
break;
#endif /* CONFIG_BZIP2 */
default:
if (iflag)
enable_interrupts();
printf ("Unimplemented compression type %d\n", comp);
show_boot_progress (-7);
return 1;
}
puts ("OK\n");
debug (" kernel loaded at 0x%08lx, end = 0x%08lx\n", load_start, load_end);
show_boot_progress (7);
if ((load_start < image_end) && (load_end > image_start)) {
debug ("image_start = 0x%lX, image_end = 0x%lx\n", image_start, image_end);
debug ("load_start = 0x%lx, load_end = 0x%lx\n", load_start, load_end);
if (images.legacy_hdr_valid) {
if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
puts ("WARNING: legacy format multi component "
"image overwritten\n");
} else {
puts ("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
show_boot_progress (-113);
do_reset (cmdtp, flag, argc, argv);
}
}
show_boot_progress (8);
lmb_reserve(&lmb, load_start, (load_end - load_start));
#if defined(CONFIG_ZIMAGE_BOOT)
after_header_check:
os = hdr->ih_os;
#endif
switch (os) {
default: /* handled by (original) Linux case */
case IH_OS_LINUX:
#ifdef CONFIG_SILENT_CONSOLE
fixup_silent_linux();
#endif
do_bootm_linux (flag, argc, argv, &images);
break;
#ifdef CONFIG_BOOTM_NETBSD
case IH_OS_NETBSD:
do_bootm_netbsd (flag, argc, argv, &images);
break;
#endif
#ifdef CONFIG_LYNXKDI
case IH_OS_LYNXOS:
do_bootm_lynxkdi (flag, argc, argv, &images);
break;
#endif
#ifdef CONFIG_BOOTM_RTEMS
case IH_OS_RTEMS:
do_bootm_rtems (flag, argc, argv, &images);
break;
#endif
/*
#if defined(CONFIG_CMD_ELF)
case IH_OS_VXWORKS:
do_bootm_vxworks (cmdtp, flag, argc, argv, &images);
break;
case IH_OS_QNX:
do_bootm_qnxelf (cmdtp, flag, argc, argv, &images);
break;
#endif
*/
#ifdef CONFIG_ARTOS
case IH_OS_ARTOS:
do_bootm_artos (cmdtp, flag, argc, argv, &images);
break;
#endif
}
show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
do_reset (cmdtp, flag, argc, argv);
#endif
if (iflag)
enable_interrupts();
return 1;
}
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong iflag;
ulong load_end = 0;
int ret;
boot_os_fn *boot_fn;
#ifdef CONFIG_SECURE_BOOT
#ifndef CONFIG_SECURE_BL1_ONLY
security_check();
#endif
#endif
char cmdbuffer[64];
sprintf(cmdbuffer,"sdfuse autocheck");
run_command(cmdbuffer, 0);
exynos4412_screen_backlight(0);
#ifdef CONFIG_ZIMAGE_BOOT
#define LINUX_ZIMAGE_MAGIC 0x016f2818
image_header_t *hdr;
ulong addr;
/* find out kernel image address */
if (argc < 2) {
addr = load_addr;
debug ("* kernel: default image load address = 0x%08lx\n",
load_addr);
} else {
addr = simple_strtoul(argv[1], NULL, 16);
}
if (*(ulong *)(addr + 9*4) == LINUX_ZIMAGE_MAGIC) {
u32 val;
printf("Boot with zImage\n");
//addr = virt_to_phys(addr);
hdr = (image_header_t *)addr;
hdr->ih_os = IH_OS_LINUX;
hdr->ih_ep = ntohl(addr);
memmove (&images.legacy_hdr_os_copy, hdr, sizeof(image_header_t));
/* save pointer to image header */
images.legacy_hdr_os = hdr;
images.legacy_hdr_valid = 1;
goto after_header_check;
}
#endif
#ifdef CONFIG_NEEDS_MANUAL_RELOC
static int relocated = 0;
/* relocate boot function table */
if (!relocated) {
int i;
for (i = 0; i < ARRAY_SIZE(boot_os); i++)
if (boot_os[i] != NULL)
boot_os[i] += gd->reloc_off;
relocated = 1;
}
#endif
/* determine if we have a sub command */
if (argc > 1) {
char *endp;
simple_strtoul(argv[1], &endp, 16);
/* endp pointing to NULL means that argv[1] was just a
* valid number, pass it along to the normal bootm processing
*
* If endp is ':' or '#' assume a FIT identifier so pass
* along for normal processing.
*
* Right now we assume the first arg should never be '-'
*/
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
if (bootm_start(cmdtp, flag, argc, argv))
return 1;
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
ret = bootm_load_os(images.os, &load_end, 1);
if (ret < 0) {
if (ret == BOOTM_ERR_RESET)
do_reset (cmdtp, flag, argc, argv);
if (ret == BOOTM_ERR_OVERLAP) {
if (images.legacy_hdr_valid) {
if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
puts ("WARNING: legacy format multi component "
"image overwritten\n");
} else {
puts ("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
show_boot_progress (-113);
do_reset (cmdtp, flag, argc, argv);
}
}
if (ret == BOOTM_ERR_UNIMPLEMENTED) {
if (iflag)
enable_interrupts();
show_boot_progress (-7);
return 1;
}
}
lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
if (images.os.type == IH_TYPE_STANDALONE) {
if (iflag)
enable_interrupts();
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(iflag, argc, argv);
return 0;
}
show_boot_progress (8);
#if defined(CONFIG_ZIMAGE_BOOT)
after_header_check:
images.os.os = hdr->ih_os;
images.ep = image_get_ep (&images.legacy_hdr_os_copy);
#endif
#ifdef CONFIG_SILENT_CONSOLE
if (images.os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
boot_fn = boot_os[images.os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf ("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images.os.os), images.os.os);
show_boot_progress (-8);
return 1;
}
arch_preboot_os();
boot_fn(0, argc, argv, &images);
show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
#endif
do_reset (cmdtp, flag, argc, argv);
return 1;
}
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong iflag;
ulong load_end = 0;
int ret = 0;
boot_os_fn *boot_fn;
AML_LOG_INIT("cmd_bootm");
AML_LOG_TE("cmd_bootm");
#ifdef TEST_UBOOT_BOOT_SPEND_TIME
bootm_start_time = get_utimer(0);
#endif
#ifdef CONFIG_NEEDS_MANUAL_RELOC
static int relocated = 0;
/* relocate boot function table */
if (!relocated) {
int i;
for (i = 0; i < ARRAY_SIZE(boot_os); i++)
if (boot_os[i] != NULL)
boot_os[i] += gd->reloc_off;
relocated = 1;
}
#endif
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_RESET_TO_SYSTEM
struct aml_pmu_driver *pmu_driver = NULL;
pmu_driver = aml_pmu_get_driver();
if (pmu_driver && pmu_driver->pmu_reset_flag_operation) {
pmu_driver->pmu_reset_flag_operation(RESET_FLAG_SET);
}
#endif
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_M6_SECU_BOOT
#ifdef CONFIG_MESON_TRUSTZONE
extern int meson_trustzone_boot_check(unsigned char *addr);
ret = meson_trustzone_boot_check((unsigned char*)load_addr);
#else
extern int aml_decrypt_kernel_image(void* kernel_image_address);
ret = aml_decrypt_kernel_image((void*)load_addr);
#endif
if(ret != 0)
{
printf("Error! Illegal kernel image, please check!\n");
return ret;
}
#endif //CONFIG_M6_SECU_BOOT
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_AML_SECU_BOOT_V2
#ifdef CONFIG_MESON_TRUSTZONE
extern int meson_trustzone_boot_check(unsigned char *addr);
if(!g_nIMGReadFlag)
ret = meson_trustzone_boot_check(aml_get_kernel_crypto_addr(argc < 2 ? NULL : argv[1]));
#else
extern int aml_sec_boot_check(unsigned char *pSRC);
if(!g_nIMGReadFlag)
ret = aml_sec_boot_check(aml_get_kernel_crypto_addr(argc < 2 ? NULL : argv[1]));
#endif
if(0 != ret)
return ret;
#endif //CONFIG_AML_SECU_BOOT_V2
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_AML_GATE_INIT
extern void gate_init(void);
gate_init();
#endif
/* determine if we have a sub command */
if (argc > 1) {
char *endp;
simple_strtoul(argv[1], &endp, 16);
/* endp pointing to NULL means that argv[1] was just a
* valid number, pass it along to the normal bootm processing
*
* If endp is ':' or '#' assume a FIT identifier so pass
* along for normal processing.
*
* Right now we assume the first arg should never be '-'
*/
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
AML_LOG_TE("cmd_bootm");
if (bootm_start(cmdtp, flag, argc, argv))
return 1;
AML_LOG_TE("cmd_bootm");
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
AML_LOG_TE("cmd_bootm");
ret = bootm_load_os(images.os, &load_end, 1);
AML_LOG_TE("cmd_bootm");
if (ret < 0) {
if (ret == BOOTM_ERR_RESET)
do_reset (cmdtp, flag, argc, argv);
if (ret == BOOTM_ERR_OVERLAP) {
if (images.legacy_hdr_valid) {
if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
puts ("WARNING: legacy format multi component "
"image overwritten\n");
} else {
puts ("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
show_boot_progress (-113);
do_reset (cmdtp, flag, argc, argv);
}
}
if (ret == BOOTM_ERR_UNIMPLEMENTED) {
if (iflag)
enable_interrupts();
show_boot_progress (-7);
return 1;
}
}
AML_LOG_TE("cmd_bootm");
lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
AML_LOG_TE("cmd_bootm");
if (images.os.type == IH_TYPE_STANDALONE) {
if (iflag)
enable_interrupts();
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(iflag, argc, argv);
return 0;
}
show_boot_progress (8);
#if defined(CONFIG_SILENT_CONSOLE) && \
(defined(CONFIG_SILENT_CONSOLE_LINUX_QUIET) || defined(CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE))
if (images.os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_AUTO_SET_BOOTARGS_MEM
mem_size_arg_process();
#endif
boot_fn = boot_os[images.os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf ("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images.os.os), images.os.os);
show_boot_progress (-8);
return 1;
}
AML_LOG_TE("cmd_bootm");
arch_preboot_os();
#ifdef TEST_UBOOT_BOOT_SPEND_TIME
{ int boot_kernel_start;
boot_kernel_start = get_utimer(0);
printf("bootm start to prepare boot kernel time:%dus\n",boot_kernel_start-bootm_start_time);
printf("from main_loop start to kernel decompress finished time:%dus\n",boot_kernel_start-main_loop_start);
}
#endif
ulong temp_img_addr;
AML_LOG_TE("cmd_bootm");
/* use fprintf to always show this print even if console is silenced with GD_FLG_SILENT */
fprintf(stderr, "uboot time: %d us.\n", get_utimer(0));
boot_fn(0, argc, argv, &images);
show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
#endif
do_reset (cmdtp, flag, argc, argv);
return 1;
}
