// enters the event_base loop -- will only exit when forced to
bool EventBase::loop() {
VLOG(5) << "EventBase(): Starting loop.";
int res = 0;
bool ranLoopCallbacks;
int nonBlocking;
loopThread_.store(pthread_self(), std::memory_order_release);
#if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ >= 12)
if (!name_.empty()) {
pthread_setname_np(pthread_self(), name_.c_str());
}
#endif
int64_t prev = std::chrono::duration_cast<std::chrono::milliseconds>(
std::chrono::steady_clock::now().time_since_epoch()).count();
int64_t idleStart = std::chrono::duration_cast<std::chrono::microseconds>(
std::chrono::steady_clock::now().time_since_epoch()).count();
// TODO: Read stop_ atomically with an acquire barrier.
while (!stop_) {
++nextLoopCnt_;
// nobody can add loop callbacks from within this thread if
// we don't have to handle anything to start with...
nonBlocking = (loopCallbacks_.empty() ? 0 : EVLOOP_NONBLOCK);
res = event_base_loop(evb_, EVLOOP_ONCE | nonBlocking);
ranLoopCallbacks = runLoopCallbacks();
int64_t busy = std::chrono::duration_cast<std::chrono::microseconds>(
std::chrono::steady_clock::now().time_since_epoch()).count() - startWork_;
int64_t idle = startWork_ - idleStart;
avgLoopTime_.addSample(idle, busy);
maxLatencyLoopTime_.addSample(idle, busy);
if (observer_) {
if (observerSampleCount_++ == observer_->getSampleRate()) {
observerSampleCount_ = 0;
observer_->loopSample(busy, idle);
}
}
VLOG(11) << "EventBase " << this << " did not timeout "
" loop time guess: " << busy + idle <<
" idle time: " << idle <<
" busy time: " << busy <<
" avgLoopTime: " << avgLoopTime_.get() <<
" maxLatencyLoopTime: " << maxLatencyLoopTime_.get() <<
" maxLatency_: " << maxLatency_ <<
" nothingHandledYet(): "<< nothingHandledYet();
// see if our average loop time has exceeded our limit
if ((maxLatency_ > 0) &&
(maxLatencyLoopTime_.get() > double(maxLatency_))) {
maxLatencyCob_();
// back off temporarily -- don't keep spamming maxLatencyCob_
// if we're only a bit over the limit
maxLatencyLoopTime_.dampen(0.9);
}
// Our loop run did real work; reset the idle timer
idleStart = std::chrono::duration_cast<std::chrono::microseconds>(
std::chrono::steady_clock::now().time_since_epoch()).count();
// If the event loop indicate that there were no more events, and
// we also didn't have any loop callbacks to run, there is nothing left to
// do.
if (res != 0 && !ranLoopCallbacks) {
// Since Notification Queue is marked 'internal' some events may not have
// run. Run them manually if so, and continue looping.
//
if (getNotificationQueueSize() > 0) {
fnRunner_->handlerReady(0);
} else {
break;
}
}
VLOG(5) << "EventBase " << this << " loop time: " << getTimeDelta(&prev);
}
// Reset stop_ so loop() can be called again
stop_ = false;
if (res < 0) {
LOG(ERROR) << "EventBase: -- error in event loop, res = " << res;
return false;
} else if (res == 1) {
VLOG(5) << "EventBase: ran out of events (exiting loop)!";
} else if (res > 1) {
LOG(ERROR) << "EventBase: unknown event loop result = " << res;
return false;
}
loopThread_.store(0, std::memory_order_release);
VLOG(5) << "EventBase(): Done with loop.";
return true;
}
bool EventBase::loopBody(int flags) {
VLOG(5) << "EventBase(): Starting loop.";
DCHECK(!invokingLoop_)
<< "Your code just tried to loop over an event base from inside another "
<< "event base loop. Since libevent is not reentrant, this leads to "
<< "undefined behavior in opt builds. Please fix immediately. For the "
<< "common case of an inner function that needs to do some synchronous "
<< "computation on an event-base, replace getEventBase() by a new, "
<< "stack-allocated EvenBase.";
invokingLoop_ = true;
SCOPE_EXIT {
invokingLoop_ = false;
};
int res = 0;
bool ranLoopCallbacks;
bool blocking = !(flags & EVLOOP_NONBLOCK);
bool once = (flags & EVLOOP_ONCE);
// time-measurement variables.
std::chrono::steady_clock::time_point prev;
int64_t idleStart = 0;
int64_t busy;
int64_t idle;
loopThread_.store(pthread_self(), std::memory_order_release);
if (!name_.empty()) {
setThreadName(name_);
}
if (enableTimeMeasurement_) {
prev = std::chrono::steady_clock::now();
idleStart = std::chrono::duration_cast<std::chrono::microseconds>(
std::chrono::steady_clock::now().time_since_epoch()).count();
}
while (!stop_.load(std::memory_order_acquire)) {
applyLoopKeepAlive();
++nextLoopCnt_;
// Run the before loop callbacks
LoopCallbackList callbacks;
callbacks.swap(runBeforeLoopCallbacks_);
while(!callbacks.empty()) {
auto* item = &callbacks.front();
callbacks.pop_front();
item->runLoopCallback();
}
// nobody can add loop callbacks from within this thread if
// we don't have to handle anything to start with...
if (blocking && loopCallbacks_.empty()) {
res = event_base_loop(evb_, EVLOOP_ONCE);
} else {
res = event_base_loop(evb_, EVLOOP_ONCE | EVLOOP_NONBLOCK);
}
ranLoopCallbacks = runLoopCallbacks();
if (enableTimeMeasurement_) {
busy = std::chrono::duration_cast<std::chrono::microseconds>(
std::chrono::steady_clock::now().time_since_epoch()).count() -
startWork_;
idle = startWork_ - idleStart;
avgLoopTime_.addSample(idle, busy);
maxLatencyLoopTime_.addSample(idle, busy);
if (observer_) {
if (observerSampleCount_++ == observer_->getSampleRate()) {
observerSampleCount_ = 0;
observer_->loopSample(busy, idle);
}
}
VLOG(11) << "EventBase " << this << " did not timeout "
" loop time guess: " << busy + idle <<
" idle time: " << idle <<
" busy time: " << busy <<
" avgLoopTime: " << avgLoopTime_.get() <<
" maxLatencyLoopTime: " << maxLatencyLoopTime_.get() <<
" maxLatency_: " << maxLatency_ <<
" notificationQueueSize: " << getNotificationQueueSize() <<
" nothingHandledYet(): "<< nothingHandledYet();
// see if our average loop time has exceeded our limit
if ((maxLatency_ > 0) &&
(maxLatencyLoopTime_.get() > double(maxLatency_))) {
maxLatencyCob_();
// back off temporarily -- don't keep spamming maxLatencyCob_
// if we're only a bit over the limit
maxLatencyLoopTime_.dampen(0.9);
}
// Our loop run did real work; reset the idle timer
idleStart = std::chrono::duration_cast<std::chrono::microseconds>(
std::chrono::steady_clock::now().time_since_epoch()).count();
} else {
VLOG(11) << "EventBase " << this << " did not timeout";
}
// If the event loop indicate that there were no more events, and
// we also didn't have any loop callbacks to run, there is nothing left to
// do.
if (res != 0 && !ranLoopCallbacks) {
// Since Notification Queue is marked 'internal' some events may not have
// run. Run them manually if so, and continue looping.
//
if (getNotificationQueueSize() > 0) {
fnRunner_->handlerReady(0);
} else {
break;
}
}
if (enableTimeMeasurement_) {
VLOG(5) << "EventBase " << this << " loop time: " <<
getTimeDelta(&prev).count();
}
if (once) {
break;
}
}
// Reset stop_ so loop() can be called again
stop_ = false;
if (res < 0) {
LOG(ERROR) << "EventBase: -- error in event loop, res = " << res;
return false;
} else if (res == 1) {
VLOG(5) << "EventBase: ran out of events (exiting loop)!";
} else if (res > 1) {
LOG(ERROR) << "EventBase: unknown event loop result = " << res;
return false;
}
loopThread_.store({}, std::memory_order_release);
VLOG(5) << "EventBase(): Done with loop.";
return true;
}