/**
* @brief Deactivates the PWM peripheral.
*
* @param[in] pwmp pointer to the @p PWMDriver object
*
* @notapi
*/
void pwm_lld_stop(PWMDriver *pwmp)
{
//{&TCCR1A, &TCCR1B, &OCR1AH,&OCR1AL,&OCR1BH,&OCR1BL,&OCR1CH,&OCR1CL,&TCNT1H,&TCNT1L,&TIFR1,&TIMSK1},
uint8_t index = getTimerIndex(pwmp);
*timer_registers_table[index][1] &= ~((1<<CS12) |(1<<CS11) | (1<<CS10));
*timer_registers_table[index][11] = 0;
}
/**
* @brief Configures and activates the GPT peripheral.
*
* @param[in] gptp pointer to the @p GPTDriver object
*
* @notapi
*/
void gpt_lld_start(GPTDriver *gptp)
{
uint8_t psc;
if (gptp->state == GPT_STOP) {
/* Clock activation.*/
}
/* Configuration.*/
#if AVR_GPT_USE_TIM2 || defined(__DOXYGEN__)
if (gptp == &GPTD2) {
psc = prescaler(gptp->config->frequency, ratio_extended, PRESCALER_SIZE_EXTENDED);
gptp->clock_source = clock_source_extended[psc] & 0x07;
TCCR2A = (1 << WGM21) | (0 << WGM20);
TCCR2B = (0 << WGM22);
OCR2A = F_CPU / ratio_extended[psc] /gptp->config->frequency - 1;
return;
}
#endif
uint8_t i = getTimerIndex(gptp);
psc = prescaler(gptp->config->frequency, ratio_base, PRESCALER_SIZE_BASE);
gptp->clock_source = clock_source_base[psc] & 0x07;
*regs_table[i].tccra = (0 << WGM11) |
(0 << WGM10) |
(0 << COM1A1) |
(0 << COM1A0) |
(0 << COM1B1) |
(0 << COM1B0);
*regs_table[i].tccrb = (1 << WGM12);
*regs_table[i].ocr1 = 0;
*regs_table[i].ocr2 = F_CPU / ratio_base[psc] / gptp->config->frequency - 1;
}
/**
* @brief Stops the timer.
*
* @param[in] gptp pointer to the @p GPTDriver object
*
* @notapi
*/
void gpt_lld_stop_timer(GPTDriver *gptp) {
uint8_t i = getTimerIndex(gptp);
*regs_table[i].tccrb &= ~((7 << CS10) | (1 << OCIE1A));
*regs_table[i].tifr = (1 << OCF1A);
}
/**
* @brief Configures and activates the PWM peripheral.
*
* @param[in] pwmp pointer to the @p PWMDriver object
*
* @notapi
*/
void pwm_lld_start(PWMDriver *pwmp)
{
if ( pwmp->state == PWM_STOP)
{
/* Clock activation.*/
#if USE_AVR_PWM2 || defined(__DOXYGEN__)
if(pwmp == &PWMD2)
{
TCCR2B |= (0<<CS22) |(0<<CS21) | (1<<CS20); //parti col no prescaling
if(pwmp->config->callback != NULL)
TIMSK2 = (1<<TOIE2);
return;
}
#endif
//{&TCCR1A, &TCCR1B, &OCR1AH,&OCR1AL,&OCR1BH,&OCR1BL,&OCR1CH,&OCR1CL,&TCNT1H,&TCNT1L,&TIFR1,&TIMSK1},
uint8_t index = getTimerIndex(pwmp);
*timer_registers_table[index][1] |= (1<<CS12) |(0<<CS11) | (1<<CS10);
*timer_registers_table[index][10] = (1<<TOIE1);
}
/* Configuration.*/
}
/**
* @brief Starts the timer in continuous mode.
*
* @param[in] gptp pointer to the @p GPTDriver object
* @param[in] period period in ticks
*
* @notapi
*/
void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t period)
{
gptp->callback = gptp->config->callback;
gptp->period = period;
gptp->counter = 0;
uint8_t i = getTimerIndex(gptp);
*regs_table[i].tcnt1 = 0;
*regs_table[i].tcnt2 = 0;
*regs_table[i].tifr = (1 << OCF1A);
*regs_table[i].timsk = (1 << OCIE1A);
*regs_table[i].tccrb |= (gptp->clock_source << CS10);
}
/**
* @brief Enables a PWM channel.
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The channel is active using the specified configuration.
* @note Depending on the hardware implementation this function has
* effect starting on the next cycle (recommended implementation)
* or immediately (fallback implementation).
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
* @param[in] width PWM pulse width as clock pulses number
*
* @notapi
*/
void pwm_lld_enable_channel(PWMDriver *pwmp,
pwmchannel_t channel,
pwmcnt_t width)
{
uint32_t val = width;
val *= 256;
val /= (uint32_t)pwmp->period;
if(val > 0x00FF)
val = 0xFF;
#if USE_AVR_PWM2 || defined(__DOXYGEN__)
if(pwmp == &PWMD2)
{
pwm_configure_hw_channel(&TCCR2A,7-2*channel,6-2*channel,pwmp->config->channels[channel].mode);
TIMSK2 |= (1<< (channel + 1));
if(pwmp->config->channels[channel].callback != NULL)
switch(channel)
{
case 0:
OCR2A = val;
break;
case 1:
OCR2B = val;
break;
}
return;
}
#endif
//{&TCCR1A, &TCCR1B, &OCR1AH,&OCR1AL,&OCR1BH,&OCR1BL,&OCR1CH,&OCR1CL,&TCNT1H,&TCNT1L,&TIFR1,&TIMSK1},
uint8_t index = getTimerIndex(pwmp);
pwm_configure_hw_channel(timer_registers_table[index][0],7-2*channel,6-2*channel,pwmp->config->channels[channel].mode);
*timer_registers_table[index][2*channel+2] = 0;
*timer_registers_table[index][2*channel+3] = val;
*timer_registers_table[index][10] |= (1<< (channel + 1));
if(pwmp->config->channels[channel].callback != NULL)
{
*timer_registers_table[index][11] |= (1<< (channel + 1));
}
}
void pwmDigitalMotorHardwareConfig(const timerHardware_t *timerHardware, uint8_t motorIndex, motorPwmProtocolTypes_e pwmProtocolType)
{
motorDmaOutput_t * const motor = &dmaMotors[motorIndex];
motor->timerHardware = timerHardware;
TIM_TypeDef *timer = timerHardware->tim;
const IO_t motorIO = IOGetByTag(timerHardware->tag);
const uint8_t timerIndex = getTimerIndex(timer);
const bool configureTimer = (timerIndex == dmaMotorTimerCount-1);
IOInit(motorIO, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
IOConfigGPIOAF(motorIO, IO_CONFIG(GPIO_MODE_AF_PP, GPIO_SPEED_FREQ_VERY_HIGH, GPIO_PULLUP), timerHardware->alternateFunction);
__DMA1_CLK_ENABLE();
if (configureTimer) {
RCC_ClockCmd(timerRCC(timer), ENABLE);
uint32_t hz;
switch (pwmProtocolType) {
case(PWM_TYPE_DSHOT600):
hz = MOTOR_DSHOT600_MHZ * 1000000;
break;
case(PWM_TYPE_DSHOT300):
hz = MOTOR_DSHOT300_MHZ * 1000000;
break;
default:
case(PWM_TYPE_DSHOT150):
hz = MOTOR_DSHOT150_MHZ * 1000000;
}
motor->TimHandle.Instance = timerHardware->tim;
motor->TimHandle.Init.Prescaler = (SystemCoreClock / timerClockDivisor(timer) / hz) - 1;;
motor->TimHandle.Init.Period = MOTOR_BITLENGTH;
motor->TimHandle.Init.RepetitionCounter = 0;
motor->TimHandle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
motor->TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
if(HAL_TIM_PWM_Init(&motor->TimHandle) != HAL_OK)
{
/* Initialization Error */
return;
}
}
else
{
motor->TimHandle = dmaMotors[timerIndex].TimHandle;
}
switch (timerHardware->channel) {
case TIM_CHANNEL_1:
motor->timerDmaSource = TIM_DMA_ID_CC1;
break;
case TIM_CHANNEL_2:
motor->timerDmaSource = TIM_DMA_ID_CC2;
break;
case TIM_CHANNEL_3:
motor->timerDmaSource = TIM_DMA_ID_CC3;
break;
case TIM_CHANNEL_4:
motor->timerDmaSource = TIM_DMA_ID_CC4;
break;
}
dmaMotorTimers[timerIndex].timerDmaSources |= motor->timerDmaSource;
/* Set the parameters to be configured */
motor->hdma_tim.Init.Channel = timerHardware->dmaChannel;
motor->hdma_tim.Init.Direction = DMA_MEMORY_TO_PERIPH;
motor->hdma_tim.Init.PeriphInc = DMA_PINC_DISABLE;
motor->hdma_tim.Init.MemInc = DMA_MINC_ENABLE;
motor->hdma_tim.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
motor->hdma_tim.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
motor->hdma_tim.Init.Mode = DMA_NORMAL;
motor->hdma_tim.Init.Priority = DMA_PRIORITY_HIGH;
motor->hdma_tim.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
motor->hdma_tim.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
motor->hdma_tim.Init.MemBurst = DMA_MBURST_SINGLE;
motor->hdma_tim.Init.PeriphBurst = DMA_PBURST_SINGLE;
/* Set hdma_tim instance */
if(timerHardware->dmaStream == NULL)
{
/* Initialization Error */
return;
}
motor->hdma_tim.Instance = timerHardware->dmaStream;
/* Link hdma_tim to hdma[x] (channelx) */
__HAL_LINKDMA(&motor->TimHandle, hdma[motor->timerDmaSource], motor->hdma_tim);
dmaInit(timerHardware->dmaIrqHandler, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
dmaSetHandler(timerHardware->dmaIrqHandler, motor_DMA_IRQHandler, NVIC_BUILD_PRIORITY(1, 2), motorIndex);
/* Initialize TIMx DMA handle */
if(HAL_DMA_Init(motor->TimHandle.hdma[motor->timerDmaSource]) != HAL_OK)
{
/* Initialization Error */
return;
}
TIM_OC_InitTypeDef TIM_OCInitStructure;
/* PWM1 Mode configuration: Channel1 */
TIM_OCInitStructure.OCMode = TIM_OCMODE_PWM1;
TIM_OCInitStructure.OCPolarity = TIM_OCPOLARITY_HIGH;
TIM_OCInitStructure.OCIdleState = TIM_OCIDLESTATE_RESET;
TIM_OCInitStructure.OCNIdleState = TIM_OCNIDLESTATE_RESET;
TIM_OCInitStructure.OCFastMode = TIM_OCFAST_DISABLE;
TIM_OCInitStructure.Pulse = 0;
if(HAL_TIM_PWM_ConfigChannel(&motor->TimHandle, &TIM_OCInitStructure, motor->timerHardware->channel) != HAL_OK)
{
/* Configuration Error */
return;
}
}
void pwmDshotMotorHardwareConfig(const timerHardware_t *timerHardware, uint8_t motorIndex, motorPwmProtocolTypes_e pwmProtocolType, uint8_t output)
{
motorDmaOutput_t * const motor = &dmaMotors[motorIndex];
motor->timerHardware = timerHardware;
TIM_TypeDef *timer = timerHardware->tim;
const IO_t motorIO = IOGetByTag(timerHardware->tag);
const uint8_t timerIndex = getTimerIndex(timer);
IOInit(motorIO, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
IOConfigGPIOAF(motorIO, IO_CONFIG(GPIO_MODE_AF_PP, GPIO_SPEED_FREQ_VERY_HIGH, GPIO_PULLUP), timerHardware->alternateFunction);
__DMA1_CLK_ENABLE();
RCC_ClockCmd(timerRCC(timer), ENABLE);
motor->TimHandle.Instance = timerHardware->tim;
motor->TimHandle.Init.Prescaler = (timerClock(timer) / getDshotHz(pwmProtocolType)) - 1;
motor->TimHandle.Init.Period = pwmProtocolType == PWM_TYPE_PROSHOT1000 ? MOTOR_NIBBLE_LENGTH_PROSHOT : MOTOR_BITLENGTH;
motor->TimHandle.Init.RepetitionCounter = 0;
motor->TimHandle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
motor->TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
motor->TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_PWM_Init(&motor->TimHandle) != HAL_OK) {
/* Initialization Error */
return;
}
motor->timerDmaSource = timerDmaSource(timerHardware->channel);
dmaMotorTimers[timerIndex].timerDmaSources |= motor->timerDmaSource;
/* Set the parameters to be configured */
motor->hdma_tim.Init.Channel = timerHardware->dmaChannel;
motor->hdma_tim.Init.Direction = DMA_MEMORY_TO_PERIPH;
motor->hdma_tim.Init.PeriphInc = DMA_PINC_DISABLE;
motor->hdma_tim.Init.MemInc = DMA_MINC_ENABLE;
motor->hdma_tim.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
motor->hdma_tim.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
motor->hdma_tim.Init.Mode = DMA_NORMAL;
motor->hdma_tim.Init.Priority = DMA_PRIORITY_HIGH;
motor->hdma_tim.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
motor->hdma_tim.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
motor->hdma_tim.Init.MemBurst = DMA_MBURST_SINGLE;
motor->hdma_tim.Init.PeriphBurst = DMA_PBURST_SINGLE;
/* Set hdma_tim instance */
if (timerHardware->dmaRef == NULL) {
/* Initialization Error */
return;
}
motor->hdma_tim.Instance = timerHardware->dmaRef;
/* Link hdma_tim to hdma[x] (channelx) */
__HAL_LINKDMA(&motor->TimHandle, hdma[motor->timerDmaSource], motor->hdma_tim);
dmaInit(timerHardware->dmaIrqHandler, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
dmaSetHandler(timerHardware->dmaIrqHandler, motor_DMA_IRQHandler, NVIC_BUILD_PRIORITY(1, 2), motorIndex);
/* Initialize TIMx DMA handle */
if (HAL_DMA_Init(motor->TimHandle.hdma[motor->timerDmaSource]) != HAL_OK) {
/* Initialization Error */
return;
}
TIM_OC_InitTypeDef TIM_OCInitStructure;
/* PWM1 Mode configuration: Channel1 */
TIM_OCInitStructure.OCMode = TIM_OCMODE_PWM1;
if (output & TIMER_OUTPUT_N_CHANNEL) {
TIM_OCInitStructure.OCIdleState = TIM_OCIDLESTATE_RESET;
TIM_OCInitStructure.OCPolarity = (output & TIMER_OUTPUT_INVERTED) ? TIM_OCPOLARITY_HIGH : TIM_OCPOLARITY_LOW;
TIM_OCInitStructure.OCNIdleState = TIM_OCNIDLESTATE_RESET;
TIM_OCInitStructure.OCNPolarity = (output & TIMER_OUTPUT_INVERTED) ? TIM_OCNPOLARITY_HIGH : TIM_OCNPOLARITY_LOW;
} else {
TIM_OCInitStructure.OCIdleState = TIM_OCIDLESTATE_SET;
TIM_OCInitStructure.OCPolarity = (output & TIMER_OUTPUT_INVERTED) ? TIM_OCPOLARITY_LOW : TIM_OCPOLARITY_HIGH;
TIM_OCInitStructure.OCNIdleState = TIM_OCNIDLESTATE_SET;
TIM_OCInitStructure.OCNPolarity = (output & TIMER_OUTPUT_INVERTED) ? TIM_OCNPOLARITY_LOW : TIM_OCNPOLARITY_HIGH;
}
TIM_OCInitStructure.OCFastMode = TIM_OCFAST_DISABLE;
TIM_OCInitStructure.Pulse = 0;
if (HAL_TIM_PWM_ConfigChannel(&motor->TimHandle, &TIM_OCInitStructure, motor->timerHardware->channel) != HAL_OK) {
/* Configuration Error */
return;
}
}
void pwmDigitalMotorHardwareConfig(const timerHardware_t *timerHardware, uint8_t motorIndex, motorPwmProtocolTypes_e pwmProtocolType)
{
TIM_OCInitTypeDef TIM_OCInitStructure;
DMA_InitTypeDef DMA_InitStructure;
motorDmaOutput_t * const motor = &dmaMotors[motorIndex];
motor->timerHardware = timerHardware;
TIM_TypeDef *timer = timerHardware->tim;
const IO_t motorIO = IOGetByTag(timerHardware->tag);
const uint8_t timerIndex = getTimerIndex(timer);
const bool configureTimer = (timerIndex == dmaMotorTimerCount-1);
IOInit(motorIO, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
IOConfigGPIOAF(motorIO, IO_CONFIG(GPIO_Mode_AF, GPIO_Speed_50MHz, GPIO_OType_PP, GPIO_PuPd_UP), timerHardware->alternateFunction);
if (configureTimer) {
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
RCC_ClockCmd(timerRCC(timer), ENABLE);
TIM_Cmd(timer, DISABLE);
uint32_t hz;
switch (pwmProtocolType) {
case(PWM_TYPE_DSHOT600):
hz = MOTOR_DSHOT600_MHZ * 1000000;
break;
case(PWM_TYPE_DSHOT300):
hz = MOTOR_DSHOT300_MHZ * 1000000;
break;
default:
case(PWM_TYPE_DSHOT150):
hz = MOTOR_DSHOT150_MHZ * 1000000;
}
TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t)((SystemCoreClock / timerClockDivisor(timer) / hz) - 1);
TIM_TimeBaseStructure.TIM_Period = MOTOR_BITLENGTH;
TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(timer, &TIM_TimeBaseStructure);
}
TIM_OCStructInit(&TIM_OCInitStructure);
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
if (timerHardware->output & TIMER_OUTPUT_N_CHANNEL) {
TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCNIdleState_Reset;
TIM_OCInitStructure.TIM_OCNPolarity = (timerHardware->output & TIMER_OUTPUT_INVERTED) ? TIM_OCNPolarity_Low : TIM_OCNPolarity_High;
} else {
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
TIM_OCInitStructure.TIM_OCPolarity = (timerHardware->output & TIMER_OUTPUT_INVERTED) ? TIM_OCPolarity_Low : TIM_OCPolarity_High;
}
TIM_OCInitStructure.TIM_Pulse = 0;
timerOCInit(timer, timerHardware->channel, &TIM_OCInitStructure);
timerOCPreloadConfig(timer, timerHardware->channel, TIM_OCPreload_Enable);
motor->timerDmaSource = timerDmaSource(timerHardware->channel);
dmaMotorTimers[timerIndex].timerDmaSources |= motor->timerDmaSource;
TIM_CCxCmd(timer, timerHardware->channel, TIM_CCx_Enable);
if (configureTimer) {
TIM_CtrlPWMOutputs(timer, ENABLE);
TIM_ARRPreloadConfig(timer, ENABLE);
TIM_Cmd(timer, ENABLE);
}
DMA_Channel_TypeDef *channel = timerHardware->dmaChannel;
if (channel == NULL) {
/* trying to use a non valid channel */
return;
}
dmaInit(timerHardware->dmaIrqHandler, OWNER_MOTOR, RESOURCE_INDEX(motorIndex));
dmaSetHandler(timerHardware->dmaIrqHandler, motor_DMA_IRQHandler, NVIC_BUILD_PRIORITY(1, 2), motorIndex);
DMA_Cmd(channel, DISABLE);
DMA_DeInit(channel);
DMA_StructInit(&DMA_InitStructure);
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)timerChCCR(timerHardware);
DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)motor->dmaBuffer;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
DMA_InitStructure.DMA_BufferSize = MOTOR_DMA_BUFFER_SIZE;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
DMA_Init(channel, &DMA_InitStructure);
DMA_ITConfig(channel, DMA_IT_TC, ENABLE);
}
/**
* @brief Disables a PWM channel.
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The channel is disabled and its output line returned to the
* idle state.
* @note Depending on the hardware implementation this function has
* effect starting on the next cycle (recommended implementation)
* or immediately (fallback implementation).
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
*
* @notapi
*/
void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel)
{
uint8_t index = getTimerIndex(pwmp);
pwm_configure_hw_channel(timer_registers_table[index][0],7-2*channel,6-2*channel,PWM_OUTPUT_DISABLED);
*timer_registers_table[index][11] &= ~(1<< (channel + 1));
}
