//-------------------------------------------------
// update_serial -
//-------------------------------------------------
void z80sio_channel::update_serial()
{
int data_bit_count = get_rx_word_length();
stop_bits_t stop_bits = get_stop_bits();
parity_t parity;
LOG(("Z80SIO update_serial\n"));
if (m_wr4 & WR4_PARITY_ENABLE)
{
if (m_wr4 & WR4_PARITY_EVEN)
parity = PARITY_EVEN;
else
parity = PARITY_ODD;
}
else
parity = PARITY_NONE;
set_data_frame(1, data_bit_count, parity, stop_bits);
int clocks = get_clock_mode();
if (m_rxc > 0)
{
set_rcv_rate(m_rxc / clocks);
}
if (m_txc > 0)
{
set_tra_rate(m_txc / clocks);
}
receive_register_reset(); // if stop bits is changed from 0, receive register has to be reset
}
void z80dart_channel::update_serial()
{
int data_bit_count = get_rx_word_length();
stop_bits_t stop_bits = get_stop_bits();
parity_t parity;
if (m_wr[4] & WR4_PARITY_ENABLE)
{
if (m_wr[4] & WR4_PARITY_EVEN)
parity = PARITY_EVEN;
else
parity = PARITY_ODD;
}
else
parity = PARITY_NONE;
set_data_frame(1, data_bit_count, parity, stop_bits);
int clocks = get_clock_mode();
if (m_rxc > 0)
{
set_rcv_rate(m_rxc / clocks);
}
if (m_txc > 0)
{
set_tra_rate(m_txc / clocks);
}
}
void z80dart_channel::update_serial()
{
int clocks = get_clock_mode();
if (m_rxc > 0)
{
set_rcv_rate(m_rxc / clocks);
}
if (m_txc > 0)
{
set_tra_rate(m_txc / clocks);
}
int num_data_bits = get_rx_word_length();
int stop_bit_count = get_stop_bits();
int parity_code = SERIAL_PARITY_NONE;
if (m_wr[1] & WR4_PARITY_ENABLE)
{
if (m_wr[1] & WR4_PARITY_EVEN)
parity_code = SERIAL_PARITY_EVEN;
else
parity_code = SERIAL_PARITY_ODD;
}
set_data_frame(num_data_bits, stop_bit_count, parity_code);
}
void z80dart_channel::update_serial()
{
int data_bit_count = get_rx_word_length();
stop_bits_t stop_bits = get_stop_bits();
parity_t parity;
if (m_wr[4] & WR4_PARITY_ENABLE)
{
if (m_wr[4] & WR4_PARITY_EVEN)
parity = PARITY_EVEN;
else
parity = PARITY_ODD;
}
else
parity = PARITY_NONE;
set_data_frame(1, data_bit_count, parity, stop_bits);
int clocks = get_clock_mode();
if (m_rxc > 0)
{
set_rcv_rate(m_rxc / clocks);
}
if (m_txc > 0)
{
set_tra_rate(m_txc / clocks);
}
receive_register_reset(); // if stop bits is changed from 0, receive register has to be reset (FIXME: doing this without checking is stupid)
}
//-------------------------------------------------
// update_serial -
//-------------------------------------------------
void z80sio_channel::update_serial()
{
int data_bit_count = get_rx_word_length();
stop_bits_t stop_bits = get_stop_bits();
parity_t parity;
LOG("%s\n", FUNCNAME);
if (m_wr4 & WR4_PARITY_ENABLE)
{
LOG("- Parity enabled\n");
if (m_wr4 & WR4_PARITY_EVEN)
parity = PARITY_EVEN;
else
parity = PARITY_ODD;
}
else
parity = PARITY_NONE;
set_data_frame(1, data_bit_count, parity, stop_bits);
int clocks = get_clock_mode();
if (m_rxc > 0)
{
LOG("- RxC:%d/%d = %d\n", m_rxc, clocks, m_rxc / clocks);
set_rcv_rate(m_rxc / clocks);
}
if (m_txc > 0)
{
LOG("- TxC:%d/%d = %d\n", m_txc, clocks, m_txc / clocks);
set_tra_rate(m_txc / clocks);
}
receive_register_reset(); // if stop bits is changed from 0, receive register has to be reset
}
void z80sio_channel::do_sioreg_wr3(uint8_t data)
{
m_wr3 = data;
LOG("Z80SIO \"%s\" Channel %c : Receiver Enable %u\n", m_owner->tag(), 'A' + m_index, (data & WR3_RX_ENABLE) ? 1 : 0);
LOG("Z80SIO \"%s\" Channel %c : Auto Enables %u\n", m_owner->tag(), 'A' + m_index, (data & WR3_AUTO_ENABLES) ? 1 : 0);
LOG("Z80SIO \"%s\" Channel %c : Receiver Bits/Character %u\n", m_owner->tag(), 'A' + m_index, get_rx_word_length());
}
void z80dart_channel::control_write(UINT8 data)
{
int reg = m_wr[0] & WR0_REGISTER_MASK;
LOG(("Z80DART \"%s\" Channel %c : Control Register Write '%02x'\n", m_owner->tag(), 'A' + m_index, data));
// write data to selected register
if (reg < 6)
m_wr[reg] = data;
if (reg != 0)
{
// mask out register index
m_wr[0] &= ~WR0_REGISTER_MASK;
}
switch (reg)
{
case 0:
switch (data & WR0_COMMAND_MASK)
{
case WR0_NULL:
LOG(("Z80DART \"%s\" Channel %c : Null\n", m_owner->tag(), 'A' + m_index));
break;
case WR0_SEND_ABORT:
LOG(("Z80DART \"%s\" Channel %c : Send Abort\n", m_owner->tag(), 'A' + m_index));
logerror("Z80DART \"%s\" Channel %c : unsupported command: Send Abort\n", m_owner->tag(), 'A' + m_index);
break;
case WR0_RESET_EXT_STATUS:
// reset external/status interrupt
m_rr[0] &= ~(RR0_DCD | RR0_RI | RR0_CTS | RR0_BREAK_ABORT);
if (!m_dcd) m_rr[0] |= RR0_DCD;
if (m_ri) m_rr[0] |= RR0_RI;
if (m_cts) m_rr[0] |= RR0_CTS;
m_rx_rr0_latch = 0;
LOG(("Z80DART \"%s\" Channel %c : Reset External/Status Interrupt\n", m_owner->tag(), 'A' + m_index));
break;
case WR0_CHANNEL_RESET:
// channel reset
LOG(("Z80DART \"%s\" Channel %c : Channel Reset\n", m_owner->tag(), 'A' + m_index));
device_reset();
break;
case WR0_ENABLE_INT_NEXT_RX:
// enable interrupt on next receive character
LOG(("Z80DART \"%s\" Channel %c : Enable Interrupt on Next Received Character\n", m_owner->tag(), 'A' + m_index));
m_rx_first = 1;
break;
case WR0_RESET_TX_INT:
// reset transmitter interrupt pending
LOG(("Z80DART \"%s\" Channel %c : Reset Transmitter Interrupt Pending\n", m_owner->tag(), 'A' + m_index));
logerror("Z80DART \"%s\" Channel %c : unsupported command: Reset Transmitter Interrupt Pending\n", m_owner->tag(), 'A' + m_index);
break;
case WR0_ERROR_RESET:
// error reset
LOG(("Z80DART \"%s\" Channel %c : Error Reset\n", m_owner->tag(), 'A' + m_index));
m_rr[1] &= ~(RR1_CRC_FRAMING_ERROR | RR1_RX_OVERRUN_ERROR | RR1_PARITY_ERROR);
break;
case WR0_RETURN_FROM_INT:
// return from interrupt
LOG(("Z80DART \"%s\" Channel %c : Return from Interrupt\n", m_owner->tag(), 'A' + m_index));
m_uart->z80daisy_irq_reti();
break;
}
break;
case 1:
LOG(("Z80DART \"%s\" Channel %c : External Interrupt Enable %u\n", m_owner->tag(), 'A' + m_index, (data & WR1_EXT_INT_ENABLE) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Transmit Interrupt Enable %u\n", m_owner->tag(), 'A' + m_index, (data & WR1_TX_INT_ENABLE) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Status Affects Vector %u\n", m_owner->tag(), 'A' + m_index, (data & WR1_STATUS_VECTOR) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Wait/Ready Enable %u\n", m_owner->tag(), 'A' + m_index, (data & WR1_WRDY_ENABLE) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Wait/Ready Function %s\n", m_owner->tag(), 'A' + m_index, (data & WR1_WRDY_FUNCTION) ? "Ready" : "Wait"));
LOG(("Z80DART \"%s\" Channel %c : Wait/Ready on %s\n", m_owner->tag(), 'A' + m_index, (data & WR1_WRDY_ON_RX_TX) ? "Receive" : "Transmit"));
switch (data & WR1_RX_INT_MODE_MASK)
{
case WR1_RX_INT_DISABLE:
LOG(("Z80DART \"%s\" Channel %c : Receiver Interrupt Disabled\n", m_owner->tag(), 'A' + m_index));
break;
case WR1_RX_INT_FIRST:
LOG(("Z80DART \"%s\" Channel %c : Receiver Interrupt on First Character\n", m_owner->tag(), 'A' + m_index));
break;
case WR1_RX_INT_ALL_PARITY:
LOG(("Z80DART \"%s\" Channel %c : Receiver Interrupt on All Characters, Parity Affects Vector\n", m_owner->tag(), 'A' + m_index));
break;
case WR1_RX_INT_ALL:
LOG(("Z80DART \"%s\" Channel %c : Receiver Interrupt on All Characters\n", m_owner->tag(), 'A' + m_index));
break;
}
m_uart->check_interrupts();
break;
case 2:
// interrupt vector
if (m_index == z80dart_device::CHANNEL_B)
m_rr[2] = ( m_rr[2] & 0x0e ) | ( m_wr[2] & 0xF1);;
m_uart->check_interrupts();
LOG(("Z80DART \"%s\" Channel %c : Interrupt Vector %02x\n", m_owner->tag(), 'A' + m_index, data));
break;
case 3:
LOG(("Z80DART \"%s\" Channel %c : Receiver Enable %u\n", m_owner->tag(), 'A' + m_index, (data & WR3_RX_ENABLE) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Auto Enables %u\n", m_owner->tag(), 'A' + m_index, (data & WR3_AUTO_ENABLES) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Receiver Bits/Character %u\n", m_owner->tag(), 'A' + m_index, get_rx_word_length()));
update_serial();
break;
case 4:
LOG(("Z80DART \"%s\" Channel %c : Parity Enable %u\n", m_owner->tag(), 'A' + m_index, (data & WR4_PARITY_ENABLE) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Parity %s\n", m_owner->tag(), 'A' + m_index, (data & WR4_PARITY_EVEN) ? "Even" : "Odd"));
LOG(("Z80DART \"%s\" Channel %c : Stop Bits %s\n", m_owner->tag(), 'A' + m_index, stop_bits_tostring(get_stop_bits())));
LOG(("Z80DART \"%s\" Channel %c : Clock Mode %uX\n", m_owner->tag(), 'A' + m_index, get_clock_mode()));
update_serial();
break;
case 5:
LOG(("Z80DART \"%s\" Channel %c : Transmitter Enable %u\n", m_owner->tag(), 'A' + m_index, (data & WR5_TX_ENABLE) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Transmitter Bits/Character %u\n", m_owner->tag(), 'A' + m_index, get_tx_word_length()));
LOG(("Z80DART \"%s\" Channel %c : Send Break %u\n", m_owner->tag(), 'A' + m_index, (data & WR5_SEND_BREAK) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Request to Send %u\n", m_owner->tag(), 'A' + m_index, (data & WR5_RTS) ? 1 : 0));
LOG(("Z80DART \"%s\" Channel %c : Data Terminal Ready %u\n", m_owner->tag(), 'A' + m_index, (data & WR5_DTR) ? 1 : 0));
update_serial();
if (data & WR5_RTS)
{
// when the RTS bit is set, the _RTS output goes low
set_rts(0);
m_rts = 1;
}
else
{
// when the RTS bit is reset, the _RTS output goes high after the transmitter empties
m_rts = 0;
}
// data terminal ready output follows the state programmed into the DTR bit*/
set_dtr((data & WR5_DTR) ? 0 : 1);
break;
case 6:
LOG(("Z80DART \"%s\" Channel %c : Transmit Sync %02x\n", m_owner->tag(), 'A' + m_index, data));
m_sync = (m_sync & 0xff00) | data;
break;
case 7:
LOG(("Z80DART \"%s\" Channel %c : Receive Sync %02x\n", m_owner->tag(), 'A' + m_index, data));
m_sync = (data << 8) | (m_sync & 0xff);
break;
}
}