static long proximity_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct gp2a_data *gp2a = dev_get_drvdata(switch_cmd_dev);
int ret=0;
switch(cmd) {
case SHARP_GP2AP_OPEN:
{
printk(KERN_INFO "[PROXIMITY] %s : case OPEN\n", __FUNCTION__);
gp2a_on(gp2a,PROXIMITY);
proximity_enable =1;
}
break;
case SHARP_GP2AP_CLOSE:
{
printk(KERN_INFO "[PROXIMITY] %s : case CLOSE\n", __FUNCTION__);
gp2a_off(gp2a,PROXIMITY);
proximity_enable=0;
}
break;
default:
printk(KERN_INFO "[PROXIMITY] unknown ioctl %d\n", cmd);
ret = -1;
break;
}
return ret;
}
static int light_release(struct inode *ip, struct file *fp)
{
struct gp2a_data *gp2a = dev_get_drvdata(switch_cmd_dev);
gp2a_off(gp2a,LIGHT);
gprintk("[%s] \n",__func__);
return 0;
}
static ssize_t lightsensor_file_cmd_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct gp2a_data *gp2a = dev_get_drvdata(dev);
int value;
sscanf(buf, "%d", &value);
printk(KERN_INFO "[LIGHT_SENSOR] in lightsensor_file_cmd_store, input value = %d \n",value);
if(value==1 && light_enable == OFF)
{
light_init_period = 4;
gp2a_on(gp2a,LIGHT);
value = ON;
}
else if(value==0 && light_enable ==ON)
{
gp2a_off(gp2a,LIGHT);
value = OFF;
}
/* temporary test code for proximity sensor */
else if(value==3 && proximity_enable == OFF)
{
gp2a_on(gp2a,PROXIMITY);
printk("[PROXIMITY] Temporary : Power ON\n");
}
else if(value==2 && proximity_enable == ON)
{
gp2a_off(gp2a,PROXIMITY);
printk("[PROXIMITY] Temporary : Power OFF\n");
}
/* for factory simple test mode */
if(value==7 && light_enable == OFF)
{
light_init_period = 2;
gp2a_on(gp2a,LIGHT);
value = 7;
}
return size;
}
static ssize_t gp2a_onoff_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
unsigned long value = simple_strtoul(buf, NULL, 10);
struct gp2a_data *gp2a = dev_get_drvdata(dev);
value?gp2a_on(gp2a):gp2a_off(gp2a);
return size;
}
static long proximity_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct gp2a_data *gp2a = dev_get_drvdata(switch_cmd_dev);
int ret=0;
switch(cmd) {
case SHARP_GP2AP_OPEN:
{
if(!proximity_enable)
{
printk(KERN_INFO "[PROXIMITY] %s : case OPEN\n", __FUNCTION__);
gp2a_on(gp2a,PROXIMITY);
}
else
printk(KERN_INFO "[PROXIMITY] Warning!! Proximity is already power on\n");
}
break;
case SHARP_GP2AP_CLOSE:
{
if(proximity_enable)
{
printk(KERN_INFO "[PROXIMITY] %s : case CLOSE\n", __FUNCTION__);
gp2a_off(gp2a,PROXIMITY);
wake_lock_timeout(&prx_wake_lock,3 * HZ);
}
else
printk(KERN_INFO "[PROXIMITY] Warning!! Proximity is already power off\n");
}
break;
default:
printk(KERN_INFO "[PROXIMITY] unknown ioctl %d\n", cmd);
ret = -1;
break;
}
return ret;
}
static ssize_t proxsensor_onoff_ctrl_store(struct device *dev, struct device_attribute *attr, char *buf, size_t size)
{
struct gp2a_data *gp2a = dev_get_drvdata(switch_cmd_dev);
unsigned int onoff;
int ret = 0;
sscanf(buf,"%d\n",&onoff);
printk("Set Proximity Sensor OnOff : %d\n",onoff);
if(onoff == 1)
{
ret = gp2a_on(gp2a,PROXIMITY);
if(ret == 0)
proximity_enable =1;
}
else
{
ret = gp2a_off(gp2a,PROXIMITY);
if(ret == 0)
proximity_enable =0;
}
return size;
}
static int gp2a_opt_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int err = 0;
int i;
#if USE_INTERRUPT
int irq;
#endif
int config;
struct gp2a_data *gp2a;
#ifdef STM_DEBUG
printk(KERN_INFO "%s\n",__FUNCTION__);
#endif
#if defined(CONFIG_MACH_TOTORO_CTC) && (CONFIG_BOARD_REVISION >= 0x02) //twkim add proximity sensor driver to totoro_ctc
{
vreg_proximity = vreg_get(0, "ldo9"); //twkim fixed pmic set
if (IS_ERR(vreg_proximity))
{
printk("===== [PROXIMITY] proximity IS_ERR TEST =====\n");
return PTR_ERR(vreg_proximity);
}
#if defined(CONFIG_MACH_TOTORO_CTC) && (CONFIG_BOARD_REVISION >= 0x02) //twkim add proximity sensor driver to totoro_ctc
vreg_set_level(vreg_proximity, OUT2800mV); // set to 3.0V voltage twkim 12 -> 10 to set 2.85V -> 2.6v
gp2a_gpio_set(ENABLE);
#else
vreg_set_level(vreg_proximity, OUT2850mV); // set to 3.0V voltage twkim 12 -> 10 to set 2.85V
#endif
vreg_enable(vreg_proximity); // voltage
}
#else
if( board_hw_revision < 3 )
{
vreg_proximity = vreg_get(0, "ldo19");
if (IS_ERR(vreg_proximity))
{
printk("===== [PROXIMITY] proximity IS_ERR TEST =====\n");
return PTR_ERR(vreg_proximity);
}
vreg_set_level(vreg_proximity, 12); // set to 3.0V voltage
vreg_enable(vreg_proximity); // voltage
}
else
{
gpio_set_value(VIR_LED_EN, 1);
}
#endif
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
{
printk(KERN_INFO "[GP2A] i2c_check_functionality error\n");
err = -ENODEV;
goto exit;
}
if ( !i2c_check_functionality(client->adapter,I2C_FUNC_SMBUS_BYTE_DATA) ) {
printk(KERN_INFO "[GP2A] byte op is not permited.\n");
goto exit;
}
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
if (!(gp2a = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL)))
{
err = -ENOMEM;
goto exit;
}
memset(gp2a, 0, sizeof(struct gp2a_data));
gp2a->client = client;
i2c_set_clientdata(client, gp2a);
opt_i2c_client = client;
if (i2c_smbus_read_byte(client) < 0)
{
printk(KERN_ERR "[GP2A] i2c_smbus_read_byte error!!\n");
goto exit_kfree;
}
else
{
printk("GP2A Device detected!\n");
}
printk("[%s] slave addr = %x\n", __func__, client->addr);
/* Input device Settings */
if(USE_INPUT_DEVICE)
{
gp2a->input_dev = input_allocate_device();
if (gp2a->input_dev == NULL)
{
pr_err("Failed to allocate input device\n");
return -ENOMEM;
}
gp2a->input_dev->name = "proximity_sensor";
set_bit(EV_SYN,gp2a->input_dev->evbit);
set_bit(EV_ABS,gp2a->input_dev->evbit);
input_set_abs_params(gp2a->input_dev, ABS_DISTANCE, 0, 1, 0, 0);
err = input_register_device(gp2a->input_dev);
if (err)
{
pr_err("Unable to register %s input device\n", gp2a->input_dev->name);
input_free_device(gp2a->input_dev);
kfree(gp2a);
return -1;
}
}
#if USE_INTERRUPT
/* WORK QUEUE Settings */
gp2a_wq = create_singlethread_workqueue("gp2a_wq");
if (!gp2a_wq)
return -ENOMEM;
INIT_WORK(&gp2a->work_prox, gp2a_work_func_prox);
gprintk("Workqueue Settings complete\n");
#endif
/* misc device Settings */
err = misc_register(&proximity_device);
if(err) {
pr_err(KERN_ERR "misc_register failed - prox \n");
}
/* wake lock init */
wake_lock_init(&prx_wake_lock, WAKE_LOCK_SUSPEND, "prx_wake_lock");
/* set sysfs for light sensor */
proxsensor_class = class_create(THIS_MODULE, "proxsensor");
if (IS_ERR(proxsensor_class))
pr_err("Failed to create class(proxsensor)!\n");
switch_cmd_dev = device_create(proxsensor_class, NULL, 0, NULL, "switch_cmd");
if (device_create_file(switch_cmd_dev, &dev_attr_proxsensor_file_state) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_proxsensor_file_state.attr.name);
dev_set_drvdata(switch_cmd_dev,gp2a);
/* ktime init */
timeA = ktime_set(0,0);
timeB = ktime_set(0,0);
/* gpio config */
config = GPIO_CFG(GPIO_SENSE_OUT, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA);
err = gpio_tlmm_config(config, GPIO_CFG_ENABLE);
if (err)
printk(KERN_ERR "%s: gpio_tlmm_config(%#x)=%d\n", __func__, GPIO_SENSE_OUT, err);
/* GP2A Regs INIT SETTINGS */
for(i=1;i<5;i++)
{
opt_i2c_write((u8)(i),&gp2a_original_image[i]);
}
mdelay(2);
#if USE_INTERRUPT
/* INT Settings */
irq = gpio_to_irq(GPIO_SENSE_OUT);
gp2a->irq = -1;
set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
err = request_irq(irq, gp2a_irq_handler, IRQF_DISABLED, "gp2a_int", gp2a);
if (err)
{
printk("[GP2A] request_irq failed for gp2a\n");
goto exit_kfree;
}
printk("[GP2A] register irq = %d\n",irq);
err = set_irq_wake(irq, 1);
printk("[GP2A] register wakeup source = %d\n",err);
if (err)
printk("[GP2A] register wakeup source failed\n");
gp2a->irq = irq;
gprintk("INT Settings complete\n");
#endif
// maintain power-down mode before using sensor
gp2a_off(gp2a,ALL);
//++ // test for sensor
/*
printk("[GP2A] curr prox value = %d\n", gpio_get_value(GPIO_SENSE_OUT));
gp2a_on(gp2a,PROXIMITY);
printk("[GP2A] curr prox value = %d\n", gpio_get_value(GPIO_SENSE_OUT));
//--
// maintain power-down mode before using sensor
//ESD test sleep
gp2a_off(gp2a,ALL);
*/
printk("gp2a_opt_probe is OK!!\n");
return 0;
exit_kfree:
kfree(gp2a);
exit:
return err;
}
//------------------------------------------------------------------------------------
static int gp2a_opt_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int err = -1;
int i;
u8 value;
#if USE_INTERRUPT
int irq;
#endif
int ret;
struct gp2a_data *gp2a;
printk("GP2A PROBE!\n");
if(!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return err;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
if (!(gp2a = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL)))
{
err = -ENOMEM;
goto exit;
}
i2c_set_clientdata(client, gp2a);
opt_i2c_client = client;
if(opt_i2c_client == NULL)
{
pr_err("opt_probe failed : i2c_client is NULL\n");
return -ENODEV;
}
else
printk("opt_i2c_client : (%s)\n",opt_i2c_client->name);
printk("[%s] slave addr = %x\n", __func__, client->addr);
#ifdef LIGHT_SENSOR_ENABLED
/* hrtimer Settings */
hrtimer_init(&gp2a->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
gp2a->timer.function = gp2a_timer_func;
gp2a_wq = create_singlethread_workqueue("gp2a_wq");
if (!gp2a_wq)
{
printk("create_singlethread_workqueue error \r\n");
return -ENOMEM;
}
INIT_WORK(&gp2a->work_light, gp2a_work_func_light);
err = misc_register(&light_device);
if(err) {
pr_err(KERN_ERR "misc_register failed - light\n");
}
/* set sysfs for light sensor */
lightsensor_class = class_create(THIS_MODULE, "lightsensor");
if (IS_ERR(lightsensor_class))
pr_err("Failed to create class(lightsensor)!\n");
switch_cmd_dev = device_create(lightsensor_class, NULL, 0, NULL, "switch_cmd");
if (IS_ERR(switch_cmd_dev))
pr_err("Failed to create device(switch_cmd_dev)!\n");
if (device_create_file(switch_cmd_dev, &dev_attr_lightsensor_file_cmd) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_lightsensor_file_cmd.attr.name);
if (device_create_file(switch_cmd_dev, &dev_attr_lightsensor_file_state) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_lightsensor_file_state.attr.name);
dev_set_drvdata(switch_cmd_dev,gp2a);
gp2a_off(gp2a,LIGHT);
#endif
/* Input device Settings */
if(USE_INPUT_DEVICE)
{
gp2a->input_dev = input_allocate_device();
if (gp2a->input_dev == NULL)
{
pr_err("Failed to allocate input device\n");
return -ENOMEM;
}
gp2a->input_dev->name = "proximity";
set_bit(EV_SYN,gp2a->input_dev->evbit);
set_bit(EV_ABS,gp2a->input_dev->evbit);
input_set_abs_params(gp2a->input_dev, ABS_DISTANCE, 0, 1, 0, 0);
err = input_register_device(gp2a->input_dev);
if (err)
{
pr_err("Unable to register %s input device\n", gp2a->input_dev->name);
input_free_device(gp2a->input_dev);
kfree(gp2a);
return -1;
}
}
#if USE_INTERRUPT
/* WORK QUEUE Settings */
INIT_DELAYED_WORK(&gp2a->work_prox, gp2a_work_func_prox);
gprintk("Workqueue Settings complete\n");
#endif
/* misc device Settings */
err = misc_register(&proximity_device);
if(err) {
pr_err(KERN_ERR "misc_register failed - prox \n");
}
/* wake lock init */
// wake_lock_init(&prx_wake_lock, WAKE_LOCK_SUSPEND, "prx_wake_lock");
//#if !defined(CONFIG_MACH_RANT3)
wake_lock_init(&prx_irq_wake_lock, WAKE_LOCK_SUSPEND, "prx_irq_wake_lock");
//#endif
/* set sysfs for light sensor */
proxsensor_class = class_create(THIS_MODULE, "proxsensor");
if (IS_ERR(proxsensor_class))
pr_err("Failed to create class(proxsensor)!\n");
switch_cmd_dev = device_create(proxsensor_class, NULL, 0, NULL, "switch_cmd");
if (device_create_file(switch_cmd_dev, &dev_attr_proxsensor_file_state) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_proxsensor_file_state.attr.name);
#if defined(CONFIG_MACH_RANT3)
if (device_create_file(switch_cmd_dev, &dev_attr_proxsensor_onoff_ctrl) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_proxsensor_onoff_ctrl.attr.name);
#endif
dev_set_drvdata(switch_cmd_dev,gp2a);
/* ktime init */
timeA = ktime_set(0,0);
timeB = ktime_set(0,0);
/* GP2A Regs INIT SETTINGS */
value = 0x00;
err = opt_i2c_write((u8)(REGS_OPMOD),&value);
if(err == -EIO) // NC gp2a
goto exit_kfree;
/*
for(i=1;i<5;i++)
{
opt_i2c_write((u8)(i),&gp2a_original_image[i]);
}
*/
mdelay(2);
#if USE_INTERRUPT
/* INT Settings */
irq = gpio_to_irq(GPIO_PS_VOUT);
gp2a->irq = -1;
set_irq_type(irq, IRQ_TYPE_EDGE_FALLING);
err = request_irq(irq, gp2a_irq_handler, IRQF_DISABLED, "gp2a_int", gp2a);
if (err)
{
printk("[GP2A] request_irq failed for gp2a\n");
goto exit_kfree;
}
printk("[GP2A] register irq = %d\n",irq);
err = set_irq_wake(irq, 1);
printk("[GP2A] register wakeup source = %d\n",err);
if (err)
printk("[GP2A] register wakeup source failed\n");
gp2a->irq = irq;
gprintk("INT Settings complete\n");
#endif
// maintain power-down mode before using sensor
ret = gp2a_off(gp2a,ALL);
#if !defined(CONFIG_MACH_RANT3)
if(ret==0) proximity_enable = 0;
#endif
printk("gp2a_opt_probe is OK!!\n");
return 0;
exit_kfree:
printk("gp2a_opt_probe is exit_kfree!!\n");
kfree(gp2a);
exit:
return err;
}
static ssize_t lightsensor_file_cmd_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct gp2a_data *gp2a = dev_get_drvdata(dev);
int value;
sscanf(buf, "%d", &value);
int ret;
printk(KERN_INFO "[LIGHT_SENSOR] in lightsensor_file_cmd_store, input value = %d, light_enable = %d \n",value, light_enable);
switch(value){ // iamaj add case 8, 9 for enable light sensor without autobrightness
#ifdef LIGHT_SENSOR_ENABLED
case 0 :
{
if(light_enable == ON)
{
gp2a_off(gp2a,LIGHT); //Light sensor is always on
}
lightsensor_test = 0;
value = OFF;
printk(KERN_INFO "[LIGHT_SENSOR] *#0589# test end, input value = %d \n",value);
break;
}
case 1 :
{
if(light_enable == OFF)
{
gp2a_on(gp2a,LIGHT); //Light sensor is always on
}
lightsensor_test = 1;
value = ON;
printk(KERN_INFO "[LIGHT_SENSOR] *#0589# test start, input value = %d \n",value);
break;
}
#endif
/* temporary test code for proximity sensor */
case 2 :
{
if(proximity_enable == ON)
{
ret = gp2a_off(gp2a,PROXIMITY);
if(ret==0) proximity_enable =0;
printk("[PROXIMITY] Temporary : Power OFF\n");
}
break;
}
case 3 :
{
if(proximity_enable == OFF){
ret = gp2a_on(gp2a,PROXIMITY);
if(ret==0) proximity_enable =1;
printk("[PROXIMITY] Temporary : Power ON\n");
}
break;
}
#ifdef LIGHT_SENSOR_ENABLED
case 7 :
{
if(light_enable == OFF)
{
light_init_period = 2;
gp2a_on(gp2a,LIGHT);
value = 7;
}
break;
}
#endif
default :
break;
}
return size;
}
static int gp2a_opt_probe( struct platform_device* pdev )
{
struct gp2a_data *gp2a;
int irq;
int i;
int ret;
/* allocate driver_data */
gp2a = kzalloc(sizeof(struct gp2a_data),GFP_KERNEL);
if(!gp2a)
{
pr_err("kzalloc error\n");
return -ENOMEM;
}
gprintk("in %s \n",__func__);
/* init i2c */
opt_i2c_init();
if(opt_i2c_client == NULL)
{
pr_err("opt_probe failed : i2c_client is NULL\n");
return -ENODEV;
}
/* hrtimer Settings */
hrtimer_init(&gp2a->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
gp2a->timer.function = gp2a_timer_func;
/* Input device Settings */
if(USE_INPUT_DEVICE)
{
gp2a->input_dev = input_allocate_device();
if (gp2a->input_dev == NULL)
{
pr_err("Failed to allocate input device\n");
return -ENOMEM;
}
gp2a->input_dev->name = "proximity";
set_bit(EV_SYN,gp2a->input_dev->evbit);
set_bit(EV_ABS,gp2a->input_dev->evbit);
input_set_abs_params(gp2a->input_dev, ABS_DISTANCE, 0, 1, 0, 0);
ret = input_register_device(gp2a->input_dev);
if (ret)
{
pr_err("Unable to register %s input device\n", gp2a->input_dev->name);
input_free_device(gp2a->input_dev);
kfree(gp2a);
return -1;
}
}
/* WORK QUEUE Settings */
gp2a_wq = create_singlethread_workqueue("gp2a_wq");
if (!gp2a_wq)
return -ENOMEM;
INIT_WORK(&gp2a->work_prox, gp2a_work_func_prox);
INIT_WORK(&gp2a->work_light, gp2a_work_func_light);
gprintk("Workqueue Settings complete\n");
/* misc device Settings */
ret = misc_register(&proximity_device);
if(ret) {
pr_err(KERN_ERR "misc_register failed \n");
}
/* wake lock init */
wake_lock_init(&prx_wake_lock, WAKE_LOCK_SUSPEND, "prx_wake_lock");
/* set platdata */
platform_set_drvdata(pdev, gp2a);
/* set sysfs for light sensor */
lightsensor_class = class_create(THIS_MODULE, "lightsensor");
if (IS_ERR(lightsensor_class))
pr_err("Failed to create class(lightsensor)!\n");
switch_cmd_dev = device_create_drvdata(lightsensor_class, NULL, 0, NULL, "switch_cmd");
if (IS_ERR(switch_cmd_dev))
pr_err("Failed to create device(switch_cmd_dev)!\n");
if (device_create_file(switch_cmd_dev, &dev_attr_lightsensor_file_cmd) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_lightsensor_file_cmd.attr.name);
if (device_create_file(switch_cmd_dev, &dev_attr_lightsensor_file_state) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_lightsensor_file_state.attr.name);
dev_set_drvdata(switch_cmd_dev,gp2a);
/* ktime init */
timeA = ktime_set(0,0);
timeB = ktime_set(0,0);
/* POWER On */
gpio_set_value(GPIO_LUM_PWM,GPIO_LEVEL_HIGH);
mdelay(100);
/* GP2A Regs INIT SETTINGS */
for(i=1;i<5;i++)
{
opt_i2c_write((u8)(i),&gp2a_original_image[i]);
}
mdelay(2);
/* INT Settings */
irq = IRQ_GP2A_INT;
gp2a->irq = -1;
ret = request_irq(irq, gp2a_irq_handler, 0, "gp2a_int", gp2a);
if (ret) {
pr_err("unable to request irq %d\n", irq);
return ret;
}
gp2a->irq = irq;
gprintk("INT Settings complete\n");
/* maintain power-down mode before using sensor */
gp2a_off(gp2a,ALL);
return 0;
}
