static int gpio_keys_resume(struct device *dev)
{
struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
int i;
#if 0
int rc;
if(camera_ctrl){
rc = gpio_request(GPIO_CAMERA_SNAPSHOT1, "gpio_keys");
if (rc < 0) {
pr_err("%s: Fail request GPIO_CAMERA_SNAPSHOT1 pin r=%d\n", __func__, rc);
}
rc = gpio_request(GPIO_CAMERA_FOCUS1, "gpio_keys");
if (rc < 0) {
pr_err("%s: Fail request GPIO_CAMERA_FOCUS1 pin r=%d\n", __func__, rc);
}
}else{
rc = gpio_request(GPIO_CAMERA_SNAPSHOT, "gpio_keys");
if (rc < 0) {
pr_err("%s: Fail request GPIO_CAMERA_SNAPSHOT pin r=%d\n", __func__, rc);
}
rc = gpio_request(GPIO_CAMERA_FOCUS, "gpio_keys");
if (rc < 0) {
pr_err("%s: Fail request GPIO_CAMERA_FOCUS pin r=%d\n", __func__, rc);
}
}
#endif
if(camera_ctrl){
for (i = 4; i < 8 ; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup && device_may_wakeup(dev))
disable_irq_wake(bdata->irq);
#if 0
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
#endif
}
}else{
for (i = 0; i < ddata->n_buttons-4; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup && device_may_wakeup(dev))
disable_irq_wake(bdata->irq);
#if 0
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
#endif
}
}
//input_sync(ddata->input);
return 0;
}
static int gpio_keys_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
int wakeup_key = KEY_RESERVED;
int i;
if (pdata->wakeup_key)
wakeup_key = pdata->wakeup_key();
if (wakeup_key != KEY_RESERVED)
wake_lock_timeout(&pkw_wakelock, 5 * HZ);
for (i = 0; i < ddata->n_buttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup && device_may_wakeup(dev)) {
disable_irq_wake(bdata->irq);
}
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
return 0;
}
static int gpio_keys_resume(struct device *dev)
{
struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
int i;
for (i = 0; i < ddata->n_buttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup && device_may_wakeup(dev))
disable_irq_wake(bdata->irq);
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
#ifdef CONFIG_SENSORS_HALL
if (device_may_wakeup(dev) && ddata->gpio_flip_cover != 0) {
disable_irq_wake(ddata->irq_flip_cover);
#ifdef CONFIG_SENSORS_HALL_IRQ_CTRL
if (ddata->cover_state && ddata->gsm_area)
gpio_hall_irq_set(enable, false);
#endif
}
#endif
input_sync(ddata->input);
return 0;
}
static void gpio_keys_gpio_work_func(struct work_struct *work)
{
struct gpio_button_data *bdata =
container_of(work, struct gpio_button_data, work);
gpio_keys_gpio_report_event(bdata);
}
static void gpio_keys_gpio_work_func(struct work_struct *work)
{
struct gpio_button_data *bdata =
container_of(work, struct gpio_button_data, work);
pr_debug("%s: @@@@@@@@@@ report keys\n", __func__);
gpio_keys_gpio_report_event(bdata);
}
static void gpio_keys_gpio_work_func(struct work_struct *work)
{
struct gpio_button_data *bdata =
container_of(work, struct gpio_button_data, work.work);
gpio_keys_gpio_report_event(bdata);
if (bdata->button->wakeup)
pm_relax(bdata->input->dev.parent);
}
static void gpio_keys_report_state(struct gpio_keys_drvdata *ddata)
{
struct input_dev *input = ddata->input;
int i;
for (i = 0; i < ddata->pdata->nbuttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
input_sync(input);
}
static void gpio_keys_gpio_work_func(struct work_struct *work)
{
struct gpio_button_data *bdata =
container_of(work, struct gpio_button_data, work);
const struct gpio_keys_button *button = bdata->button;
int state = (gpio_get_value_cansleep(button->gpio) ? 1 : 0) ^ button->active_low;
gpio_keys_gpio_report_event(bdata);
#ifdef KEY_BOOSTER
if (button->code == KEY_HOME)
gpio_key_set_dvfs_lock(bdata, !!state);
#endif
}
static void gpio_keys_gpio_work_func(struct work_struct *work)
{
struct gpio_button_data *bdata =
container_of(work, struct gpio_button_data, work);
#ifdef CONFIG_MACH_ASUSTEK
/* Valid keys were logged for debugging */
const struct gpio_keys_button *button = bdata->button;
int state = (gpio_get_value_cansleep(button->gpio) ? 1 : 0)
^ button->active_low;
if ((button->code <= KEY_POWER) && (button->code >= KEY_VOLUMEDOWN))
pr_info("gpio_keys: %s %s\n", state ? "Pressed" : "Released",
key_descriptions[button->code - KEY_VOLUMEDOWN]);
#endif
gpio_keys_gpio_report_event(bdata);
}
static int gpio_keys_resume(struct device *dev)
{
struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
int i;
for (i = 0; i < ddata->n_buttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup && device_may_wakeup(dev))
disable_irq_wake(bdata->irq);
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
input_sync(ddata->input);
return 0;
}
static int gpio_keys_resume(struct device *dev)
{
struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
int i;
for (i = 0; i < ddata->n_buttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup && device_may_wakeup(dev)) {
disable_irq_wake(bdata->irq);
bdata->button->goog.last_suspend_cnt = get_suspend_cnt();
bdata->button->goog.synth_sent = 0;
}
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata, GPIO_KEYS_RESUME);
}
input_sync(ddata->input);
return 0;
}
static int gpio_keys_resume(struct device *dev)
{
struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
int i;
for (i = 0; i < ddata->n_buttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup && device_may_wakeup(dev))
disable_irq_wake(bdata->irq);
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
input_sync(ddata->input);
/*OPPO yuyi 2014-03-22 add begin for delay button_backlight*/
#ifdef VENDOR_EDIT
button_backlight = 1;
#endif
/*OPPO yuyi 2014-03-22 add end for delay button_backlight*/
return 0;
}
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
struct device *dev = &pdev->dev;
struct gpio_keys_platform_data alt_pdata;
struct input_dev *input;
int i, error;
int wakeup = 0;
if (!pdata) {
error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
if (error)
return error;
pdata = &alt_pdata;
}
ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
pdata->nbuttons * sizeof(struct gpio_button_data),
GFP_KERNEL);
input = input_allocate_device();
if (!ddata || !input) {
dev_err(dev, "failed to allocate state\n");
error = -ENOMEM;
goto fail1;
}
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
ddata->enable = pdata->enable;
ddata->disable = pdata->disable;
mutex_init(&ddata->disable_lock);
platform_set_drvdata(pdev, ddata);
input_set_drvdata(input, ddata);
input->name = pdata->name ? : pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
input->open = gpio_keys_open;
input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < pdata->nbuttons; i++) {
const struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_button_data *bdata = &ddata->data[i];
error = gpio_keys_setup_key(pdev, input, bdata, button);
if (error)
goto fail2;
if (button->wakeup)
wakeup = 1;
}
error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
if (error) {
dev_err(dev, "Unable to export keys/switches, error: %d\n",
error);
goto fail2;
}
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device, error: %d\n",
error);
goto fail3;
}
/* get current state of buttons that are connected to GPIOs */
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
input_sync(input);
device_init_wakeup(&pdev->dev, wakeup);
return 0;
fail3:
sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
fail2:
while (--i >= 0)
gpio_remove_key(&ddata->data[i]);
platform_set_drvdata(pdev, NULL);
fail1:
input_free_device(input);
kfree(ddata);
/* If we have no platform_data, we allocated buttons dynamically. */
if (!pdev->dev.platform_data)
kfree(pdata->buttons);
return error;
}
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
struct gpio_keys_button *button = NULL;
struct gpio_button_data *bdata = NULL;
struct device *dev = &pdev->dev;
struct gpio_keys_platform_data alt_pdata;
struct input_dev *input;
int i, error;
int wakeup = 0;
#ifdef CONFIG_SENSORS_HALL
int ret;
struct device *sec_key;
#endif
if (!pdata) {
error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
if (error)
return error;
pdata = &alt_pdata;
}
ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
pdata->nbuttons * sizeof(struct gpio_button_data),
GFP_KERNEL);
input = input_allocate_device();
if (!ddata || !input) {
dev_err(dev, "failed to allocate state\n");
error = -ENOMEM;
goto fail1;
}
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
ddata->enable = pdata->enable;
ddata->disable = pdata->disable;
#ifdef CONFIG_SENSORS_HALL
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined (CONFIG_SEC_BERLUTI_PROJECT)
ret = gpio_request(pdata->gpio_flip_cover,"HALL");
if(ret)
printk(KERN_CRIT "[HALL IC] gpio Request FAIL\n");
else {
gpio_tlmm_config(GPIO_CFG(pdata->gpio_flip_cover,0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL,GPIO_CFG_2MA),GPIO_CFG_DISABLE);
}
#endif
ddata->gpio_flip_cover = pdata->gpio_flip_cover;
ddata->irq_flip_cover = gpio_to_irq(ddata->gpio_flip_cover);
wake_lock_init(&ddata->flip_wake_lock, WAKE_LOCK_SUSPEND,
"flip_wake_lock");
#endif
mutex_init(&ddata->disable_lock);
platform_set_drvdata(pdev, ddata);
input_set_drvdata(input, ddata);
input->name = pdata->name ? : pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
#ifdef CONFIG_SENSORS_HALL
if(ddata->gpio_flip_cover != 0) {
input->evbit[0] |= BIT_MASK(EV_SW);
input_set_capability(input, EV_SW, SW_FLIP);
}
#endif
input->open = gpio_keys_open;
input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < pdata->nbuttons; i++) {
button = &pdata->buttons[i];
bdata = &ddata->data[i];
error = gpio_keys_setup_key(pdev, input, bdata, button);
if (error)
goto fail2;
if (button->wakeup)
wakeup = 1;
}
error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
if (error) {
dev_err(dev, "Unable to export keys/switches, error: %d\n",
error);
goto fail2;
}
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device, error: %d\n",
error);
goto fail3;
}
/* get current state of buttons that are connected to GPIOs */
for (i = 0; i < pdata->nbuttons; i++) {
bdata = &ddata->data[i];
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
input_sync(input);
#ifdef CONFIG_SENSORS_HALL
sec_key = device_create(sec_class, NULL, 0, NULL, "sec_key");
if (IS_ERR(sec_key))
pr_err("Failed to create device(sec_key)!\n");
ret = device_create_file(sec_key, &dev_attr_sec_key_pressed);
if (ret) {
pr_err("Failed to create device file in sysfs entries(%s)!\n",
dev_attr_sec_key_pressed.attr.name);
}
#if defined(CONFIG_SENSORS_HALL)
if(ddata->gpio_flip_cover != 0) {
ret = device_create_file(sec_key, &dev_attr_hall_detect);
if (ret < 0) {
pr_err("Failed to create device file(%s)!, error: %d\n",
dev_attr_hall_detect.attr.name, ret);
}
}
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined (CONFIG_SEC_BERLUTI_PROJECT)
if (!lvs1_1p8) {
lvs1_1p8 = regulator_get(dev, "8226_lvs1");
if(!lvs1_1p8)
printk(KERN_CRIT "%s: regulator_get for 8226_lvs1 failed\n", __func__);
else {
ret = regulator_enable(lvs1_1p8);
if (ret){
regulator_put(lvs1_1p8);
printk(KERN_CRIT "%s: Failed to enable regulator lvs1_1p8.\n",__func__);
}
}
}
#endif
#endif
ret = device_create_file(sec_key, &dev_attr_wakeup_keys);
if (ret < 0) {
pr_err("Failed to create device file(%s), error: %d\n",
dev_attr_wakeup_keys.attr.name, ret);
}
dev_set_drvdata(sec_key, ddata);
#endif
device_init_wakeup(&pdev->dev, wakeup);
return 0;
fail3:
sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
fail2:
while (--i >= 0)
gpio_remove_key(&ddata->data[i]);
platform_set_drvdata(pdev, NULL);
#ifdef CONFIG_SENSORS_HALL
wake_lock_destroy(&ddata->flip_wake_lock);
#endif
fail1:
input_free_device(input);
kfree(ddata);
/* If we have no platform_data, we allocated buttons dynamically. */
if (!pdev->dev.platform_data)
kfree(pdata->buttons);
return error;
}
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
struct gpio_keys_button *button = NULL;
struct gpio_button_data *bdata = NULL;
struct device *dev = &pdev->dev;
struct gpio_keys_platform_data alt_pdata;
struct input_dev *input;
int i, error;
int wakeup = 0;
int ret;
struct device *sec_key;
#ifdef CONFIG_SEC_PATEK_PROJECT
struct device *sec_keypad;
struct device *sec_flip;
#endif
if (!pdata) {
error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
if (error)
return error;
pdata = &alt_pdata;
}
ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
pdata->nbuttons * sizeof(struct gpio_button_data),
GFP_KERNEL);
input = input_allocate_device();
if (!ddata || !input) {
dev_err(dev, "failed to allocate state\n");
error = -ENOMEM;
goto fail1;
}
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
ddata->enable = pdata->enable;
ddata->disable = pdata->disable;
#ifdef CONFIG_SENSORS_HALL_DEBOUNCE
ddata->debounce_set = pdata->debounce_set;
#endif
#ifdef CONFIG_SENSORS_HALL
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined (CONFIG_SEC_BERLUTI_PROJECT)\
|| defined (CONFIG_SEC_MATISSE_PROJECT) || defined (CONFIG_SEC_ATLANTIC_PROJECT)\
|| defined (CONFIG_SEC_MEGA2_PROJECT) || defined (CONFIG_SEC_T8_PROJECT) || defined (CONFIG_SEC_T10_PROJECT) || defined(CONFIG_SEC_HESTIA_PROJECT)
ret = gpio_request(pdata->gpio_flip_cover,"HALL");
if(ret)
printk(KERN_CRIT "[HALL IC] gpio Request FAIL\n");
else {
gpio_tlmm_config(GPIO_CFG(pdata->gpio_flip_cover,0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL,GPIO_CFG_2MA),GPIO_CFG_DISABLE);
}
#endif
ddata->gpio_flip_cover = pdata->gpio_flip_cover;
ddata->flip_code = pdata->flip_code;
ddata->irq_flip_cover = gpio_to_irq(ddata->gpio_flip_cover);
wake_lock_init(&ddata->flip_wake_lock, WAKE_LOCK_SUSPEND,
"flip_wake_lock");
flip_status_before = -1;
#endif
mutex_init(&ddata->disable_lock);
#ifdef CONFIG_SENSORS_HALL_IRQ_CTRL
mutex_init(&ddata->irq_lock);
#endif
platform_set_drvdata(pdev, ddata);
input_set_drvdata(input, ddata);
input->name = pdata->name ? : pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
#ifdef CONFIG_SENSORS_HALL
if(ddata->gpio_flip_cover != 0) {
input->evbit[0] |= BIT_MASK(EV_SW);
input_set_capability(input, EV_SW, ddata->flip_code);
}
#endif
#ifdef CONFIG_SENSORS_HALL_IRQ_CTRL
ddata->gsm_area = false;
ddata->cover_state = false;
ddata->workaround_set = pdata->workaround_set;
drv_data = ddata;
#endif
#ifdef CONFIG_SENSORS_HALL_DEBOUNCE
ddata->debounce_set = false;
#endif
input->open = gpio_keys_open;
input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < pdata->nbuttons; i++) {
button = &pdata->buttons[i];
bdata = &ddata->data[i];
error = gpio_keys_setup_key(pdev, input, bdata, button);
if (error)
goto fail2;
#ifdef KEY_BOOSTER
error = gpio_key_init_dvfs(bdata);
if (error < 0) {
dev_err(dev, "Fail get dvfs level for touch booster\n");
goto fail2;
}
#endif
if (button->wakeup)
wakeup = 1;
}
error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
if (error) {
dev_err(dev, "Unable to export keys/switches, error: %d\n",
error);
goto fail2;
}
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device, error: %d\n",
error);
goto fail3;
}
/* get current state of buttons that are connected to GPIOs */
for (i = 0; i < pdata->nbuttons; i++) {
bdata = &ddata->data[i];
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
input_sync(input);
sec_key = device_create(sec_class, NULL, 0, NULL, "sec_key");
if (IS_ERR(sec_key))
pr_err("Failed to create device(sec_key)!\n");
#ifdef CONFIG_SEC_PATEK_PROJECT
sec_keypad=device_create(sec_class, NULL, 0, NULL, "sec_keypad");
if (device_create_file(sec_keypad, &dev_attr_brightness) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_brightness.attr.name);
sec_flip = device_create(sec_class, NULL, 0, NULL, "sec_flip");
if (device_create_file(sec_flip, &dev_attr_flipStatus) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_flipStatus.attr.name);
#endif
ret = device_create_file(sec_key, &dev_attr_sec_key_pressed);
if (ret) {
pr_err("Failed to create device file in sysfs entries(%s)!\n",
dev_attr_sec_key_pressed.attr.name);
}
#if defined(CONFIG_SEC_S_PROJECT)
ret = device_create_file(sec_key, &dev_attr_sec_key_pressed_code);
if (ret) {
pr_err("Failed to create device file in sysfs entries(%s)!\n",
dev_attr_sec_key_pressed_code.attr.name);
}
#endif
#ifdef CONFIG_SENSORS_HALL_IRQ_CTRL
if(ddata->gpio_flip_cover != 0) {
ret = device_create_file(sec_key, &dev_attr_hall_irq_ctrl);
if (ret < 0) {
pr_err("Failed to create device file(%s)!, error: %d\n",
dev_attr_hall_irq_ctrl.attr.name, ret);
}
}
#endif
#if defined(CONFIG_SENSORS_HALL)
if(ddata->gpio_flip_cover != 0) {
ret = device_create_file(sec_key, &dev_attr_hall_detect);
if (ret < 0) {
pr_err("Failed to create device file(%s)!, error: %d\n",
dev_attr_hall_detect.attr.name, ret);
}
}
#if defined(CONFIG_SENSORS_HALL_DEBOUNCE)
if(ddata->gpio_flip_cover != 0) {
ret = device_create_file(sec_key, &dev_attr_hall_irq_ctrl);
if (ret < 0) {
pr_err("Failed to create device file(%s)!, error: %d\n",
dev_attr_hall_irq_ctrl.attr.name, ret);
}
}
#endif
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined (CONFIG_SEC_BERLUTI_PROJECT) || defined (CONFIG_SEC_T8_PROJECT)
if (!lvs1_1p8) {
lvs1_1p8 = regulator_get(dev, "8226_lvs1");
if(!lvs1_1p8)
printk(KERN_CRIT "%s: regulator_get for 8226_lvs1 failed\n", __func__);
else {
ret = regulator_enable(lvs1_1p8);
if (ret){
regulator_put(lvs1_1p8);
printk(KERN_CRIT "%s: Failed to enable regulator lvs1_1p8.\n",__func__);
}
}
}
#endif
#endif
#ifdef CONFIG_USE_VM_KEYBOARD_REJECT
reject_keyboard_specific_key = false;
ret = device_create_file(sec_key, &dev_attr_reject_key_comb);
if (ret < 0) {
pr_err("Failed to create device file(%s), error: %d\n",
dev_attr_reject_key_comb.attr.name, ret);
}
#endif
ret = device_create_file(sec_key, &dev_attr_wakeup_keys);
if (ret < 0) {
pr_err("Failed to create device file(%s), error: %d\n",
dev_attr_wakeup_keys.attr.name, ret);
}
dev_set_drvdata(sec_key, ddata);
device_init_wakeup(&pdev->dev, wakeup);
#if defined(CONFIG_SEC_PATEK_PROJECT)
keypadled_powerset(&pdev->dev);
dev_set_drvdata(sec_flip, ddata);
#endif
#ifdef PERIODIC_CHECK_GPIOS
INIT_DELAYED_WORK_DEFERRABLE(&g_gpio_check_work,
sec_gpiocheck_work);
schedule_delayed_work(&g_gpio_check_work,
msecs_to_jiffies(0));
#endif
return 0;
fail3:
sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
fail2:
while (--i >= 0)
gpio_remove_key(&ddata->data[i]);
platform_set_drvdata(pdev, NULL);
#ifdef CONFIG_SENSORS_HALL
wake_lock_destroy(&ddata->flip_wake_lock);
#endif
fail1:
input_free_device(input);
kfree(ddata);
/* If we have no platform_data, we allocated buttons dynamically. */
if (!pdev->dev.platform_data)
kfree(pdata->buttons);
return error;
}
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
struct device *dev = &pdev->dev;
struct gpio_keys_platform_data alt_pdata;
struct input_dev *input;
int i, error;
int wakeup = 0;
if (!pdata) {
error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
if (error)
return error;
pdata = &alt_pdata;
}
ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
pdata->nbuttons * sizeof(struct gpio_button_data),
GFP_KERNEL);
input = input_allocate_device();
if (!ddata || !input) {
dev_err(dev, "failed to allocate state\n");
error = -ENOMEM;
goto fail1;
}
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
ddata->enable = pdata->enable;
ddata->disable = pdata->disable;
mutex_init(&ddata->disable_lock);
platform_set_drvdata(pdev, ddata);
input_set_drvdata(input, ddata);
input->name = pdata->name ? : pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
input->open = gpio_keys_open;
input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
#if 0
error = gpio_request(GPIO_CAMERA_CTRL, NULL);
if (error < 0) {
printk("[%s]Failed to request GPIO %d, error %d\n",
__func__,GPIO_CAMERA_CTRL, error);
//return error;
}
#endif
Printlog("[%s]hw_id = %d \n",__func__,board_type_with_hw_id());
camera_ctrl= (board_type_with_hw_id() > DVT2_BOARD_HW_ID);
Printlog("[%s] camera_ctrl :%d \n",__func__,camera_ctrl);
// camera_ctrl = gpio_get_value(GPIO_CAMERA_CTRL);
if(camera_ctrl){//for after DVT3 to cahnge camera gpio define
for (i = 4; i <8; i++) {
const struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_button_data *bdata = &ddata->data[i];
error = gpio_keys_setup_key(pdev, input, bdata, button);
if (error)
goto fail2;
if (button->wakeup)
wakeup = 1;
}
}else{ //for before DVT3.
for (i = 0; i < pdata->nbuttons-4; i++) {
const struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_button_data *bdata = &ddata->data[i];
error = gpio_keys_setup_key(pdev, input, bdata, button);
if (error)
goto fail2;
if (button->wakeup)
wakeup = 1;
}
}
//PrintAA("[%s] GPIO_CAMERA_CTRL value:%d",__func__,camera_ctrl);
error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
if (error) {
dev_err(dev, "Unable to export keys/switches, error: %d\n",
error);
goto fail2;
}
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device, error: %d\n",
error);
goto fail3;
}
if(camera_ctrl){//for after DVT3 to cahnge camera gpio define
/* get current state of buttons that are connected to GPIOs */
for (i = 4; i < 8; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
}else{//for before DVT3
/* get current state of buttons that are connected to GPIOs */
for (i = 0; i < pdata->nbuttons-4; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
}
input_sync(input);
device_init_wakeup(&pdev->dev, wakeup);
return 0;
fail3:
sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
fail2:
if(camera_ctrl)
while (--i >= 4)
gpio_remove_key(&ddata->data[i]);
else{
while (--i >= 0) //for before DVT3.
gpio_remove_key(&ddata->data[i]);
}
platform_set_drvdata(pdev, NULL);
fail1:
input_free_device(input);
kfree(ddata);
/* If we have no platform_data, we allocated buttons dynamically. */
if (!pdev->dev.platform_data)
kfree(pdata->buttons);
return error;
}
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
struct device *dev = &pdev->dev;
struct gpio_keys_platform_data alt_pdata;
struct input_dev *input;
int i, error;
int wakeup = 0;
if (!pdata) {
error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
if (error)
return error;
pdata = &alt_pdata;
}
ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
pdata->nbuttons * sizeof(struct gpio_button_data),
GFP_KERNEL);
input = input_allocate_device();
if (!ddata || !input) {
dev_err(dev, "failed to allocate state\n");
error = -ENOMEM;
goto fail1;
}
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
ddata->enable = pdata->enable;
ddata->disable = pdata->disable;
#ifdef CONFIG_SENSORS_HALL
ddata->gpio_flip_cover = pdata->gpio_flip_cover;
ddata->irq_flip_cover = gpio_to_irq(ddata->gpio_flip_cover);;
wake_lock_init(&ddata->flip_wake_lock, WAKE_LOCK_SUSPEND,
"flip wake lock");
#endif
mutex_init(&ddata->disable_lock);
platform_set_drvdata(pdev, ddata);
input_set_drvdata(input, ddata);
input->name = pdata->name ? : pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
#ifdef CONFIG_SENSORS_HALL
input->evbit[0] |= BIT_MASK(EV_SW);
input_set_capability(input, EV_SW, SW_FLIP);
#endif
input->open = gpio_keys_open;
input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_button_data *bdata = &ddata->data[i];
error = gpio_keys_setup_key(pdev, input, bdata, button);
if (error)
goto fail2;
if (button->wakeup)
wakeup = 1;
#ifdef KEY_BOOSTER
if (button->code == KEY_HOMEPAGE) {
error = gpio_key_init_dvfs(bdata);
if (error < 0) {
dev_err(dev, "Fail get dvfs level for touch booster\n");
goto fail2;
}
}
#endif
}
error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
if (error) {
dev_err(dev, "Unable to export keys/switches, error: %d\n",
error);
goto fail2;
}
ddata->sec_key =
device_create(sec_class, NULL, 0, ddata, "sec_key");
if (IS_ERR(ddata->sec_key))
dev_err(dev, "Failed to create sec_key device\n");
error = sysfs_create_group(&ddata->sec_key->kobj, &sec_key_attr_group);
if (error) {
dev_err(dev, "Failed to create the test sysfs: %d\n",
error);
goto fail2;
}
#ifdef CONFIG_SENSORS_HALL
init_hall_ic_irq(input);
#endif
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device, error: %d\n",
error);
goto fail3;
}
/* get current state of buttons */
for (i = 0; i < pdata->nbuttons; i++)
gpio_keys_gpio_report_event(&ddata->data[i]);
input_sync(input);
device_init_wakeup(&pdev->dev, wakeup);
return 0;
fail3:
sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
sysfs_remove_group(&ddata->sec_key->kobj, &sec_key_attr_group);
fail2:
while (--i >= 0)
gpio_remove_key(&ddata->data[i]);
platform_set_drvdata(pdev, NULL);
#ifdef CONFIG_SENSORS_HALL
wake_lock_destroy(&ddata->flip_wake_lock);
#endif
fail1:
input_free_device(input);
kfree(ddata);
/* If we have no platform_data, we allocated buttons dynamically. */
if (!pdev->dev.platform_data)
kfree(pdata->buttons);
return error;
}
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
struct device *dev = &pdev->dev;
struct gpio_keys_platform_data alt_pdata;
struct input_dev *input;
int i, error;
int wakeup = 0;
int ret;
struct device *sec_key;
if (!pdata) {
error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
if (error)
return error;
pdata = &alt_pdata;
}
ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
pdata->nbuttons * sizeof(struct gpio_button_data),
GFP_KERNEL);
input = input_allocate_device();
if (!ddata || !input) {
dev_err(dev, "failed to allocate state\n");
error = -ENOMEM;
goto fail1;
}
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
ddata->enable = pdata->enable;
ddata->disable = pdata->disable;
#ifdef CONFIG_SENSORS_HALL
ddata->gpio_flip_cover = pdata->gpio_flip_cover;
ddata->irq_flip_cover = gpio_to_irq(ddata->gpio_flip_cover);
#endif
mutex_init(&ddata->disable_lock);
platform_set_drvdata(pdev, ddata);
input_set_drvdata(input, ddata);
input->name = pdata->name ? : pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
#ifdef CONFIG_SENSORS_HALL
input->evbit[0] |= BIT_MASK(EV_SW);
input_set_capability(input, EV_SW, SW_FLIP);
#endif
input->open = gpio_keys_open;
input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_button_data *bdata = &ddata->data[i];
error = gpio_keys_setup_key(pdev, input, bdata, button);
if (error)
goto fail2;
if (button->wakeup)
wakeup = 1;
}
error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
if (error) {
dev_err(dev, "Unable to export keys/switches, error: %d\n",
error);
goto fail2;
}
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device, error: %d\n",
error);
goto fail3;
}
/* get current state of buttons that are connected to GPIOs */
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
input_sync(input);
sec_key = device_create(sec_class, NULL, 0, NULL, "sec_key");
if (IS_ERR(sec_key))
pr_err("Failed to create device(sec_key)!\n");
#if defined(CONFIG_SENSORS_HALL)
ret = device_create_file(sec_key, &dev_attr_hall_detect);
if (ret < 0) {
pr_err("Failed to create device file(%s)!, error: %d\n",
dev_attr_hall_detect.attr.name, ret);
}
#endif
ret = device_create_file(sec_key, &dev_attr_sec_key_pressed);
if (ret) {
pr_err("Failed to create device file in sysfs entries(%s)!\n",
dev_attr_sec_key_pressed.attr.name);
}
ret = device_create_file(sec_key, &dev_attr_wakeup_keys);
if (ret < 0) {
pr_err("Failed to create device file(%s), error: %d\n",
dev_attr_wakeup_keys.attr.name, ret);
}
dev_set_drvdata(sec_key, ddata);
device_init_wakeup(&pdev->dev, wakeup);
return 0;
fail3:
sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
fail2:
while (--i >= 0)
gpio_remove_key(&ddata->data[i]);
platform_set_drvdata(pdev, NULL);
fail1:
input_free_device(input);
kfree(ddata);
/* If we have no platform_data, we allocated buttons dynamically. */
if (!pdev->dev.platform_data)
kfree(pdata->buttons);
return error;
}
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
struct device *dev = &pdev->dev;
struct gpio_keys_platform_data alt_pdata;
struct input_dev *input;
int i, error;
int wakeup = 0;
if (!pdata) {
error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
if (error)
return error;
pdata = &alt_pdata;
}
ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
pdata->nbuttons * sizeof(struct gpio_button_data),
GFP_KERNEL);
input = input_allocate_device();
if (!ddata || !input) {
dev_err(dev, "failed to allocate state\n");
error = -ENOMEM;
goto fail1;
}
ddata->input = input;
ddata->n_buttons = pdata->nbuttons;
ddata->enable = pdata->enable;
ddata->disable = pdata->disable;
mutex_init(&ddata->disable_lock);
platform_set_drvdata(pdev, ddata);
input_set_drvdata(input, ddata);
input->name = pdata->name ? : pdev->name;
input->phys = "gpio-keys/input0";
input->dev.parent = &pdev->dev;
input->open = gpio_keys_open;
input->close = gpio_keys_close;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < pdata->nbuttons; i++) {
const struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_button_data *bdata = &ddata->data[i];
error = gpio_keys_setup_key(pdev, input, bdata, button);
if (error)
goto fail2;
if (button->wakeup)
wakeup = 1;
}
error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
if (error) {
dev_err(dev, "Unable to export keys/switches, error: %d\n",
error);
goto fail2;
}
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device, error: %d\n",
error);
goto fail3;
}
//&*&*&*CT1_20120516, add GSesor lock switch pin detection
ddata->lock_status= gpio_get_value(TEGRA_GPIO_PQ2); //get KB_COL2 pin status
ddata->sdev.name = FUNCTION_NAME;
ddata->sdev.print_name = print_switch_name;
ddata->sdev.print_state = print_switch_state;
ddata->sdev.state = 0;
error = switch_dev_register(&ddata->sdev);
if (error < 0)
{
printk("Error registering switch!\n");
goto fail4;
}
error = gpio_request(TEGRA_GPIO_PQ2, "glocksensor_irq");
if (error < 0) {
dev_err(dev, "failed to request TEGRA_GPIO_PQ2 error %d\n",
error);
goto fail4;
}
error = gpio_direction_input(TEGRA_GPIO_PQ2);
if (error < 0) {
dev_err(dev, "failed to configure direction for TEGRA_GPIO_PQ2 error %d\n",
error);
goto fail4;
}
tegra_gpio_enable(TEGRA_GPIO_PQ2);
ddata->lock_status= gpio_get_value(TEGRA_GPIO_PQ2);
switch_set_state(&ddata->sdev, ddata->lock_status);
error = request_threaded_irq(gpio_to_irq(TEGRA_GPIO_PQ2),NULL, process_interrupt, IRQF_TRIGGER_FALLING |IRQF_TRIGGER_RISING, "glocksensor_irq", ddata);
if( error )
{
dev_err(dev, "Unable to register swith interrupt device, error: %d\n",
error);
goto fail5;
}
//&*&*&*CT2_20120516, add GSesor lock switch pin detection
/* get current state of buttons that are connected to GPIOs */
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_button_data *bdata = &ddata->data[i];
if (gpio_is_valid(bdata->button->gpio))
gpio_keys_gpio_report_event(bdata);
}
input_sync(input);
//&*&*&*HC1_20120514
if (input != NULL)
g_pwr_input = input;
//&*&*&*HC2_20120514
device_init_wakeup(&pdev->dev, wakeup);
return 0;
//&*&*&*CT1_20120516, add GSesor lock switch pin detection
fail5:
switch_dev_unregister(&ddata->sdev);
fail4:
gpio_free(TEGRA_GPIO_PQ2);
//&*&*&*CT2_20120516, add GSesor lock switch pin detection
fail3:
sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
fail2:
while (--i >= 0)
gpio_remove_key(&ddata->data[i]);
platform_set_drvdata(pdev, NULL);
fail1:
input_free_device(input);
kfree(ddata);
/* If we have no platform_data, we allocated buttons dynamically. */
if (!pdev->dev.platform_data)
kfree(pdata->buttons);
return error;
}
