static int h2_protocol_switch(conn_rec *c, request_rec *r, server_rec *s,
const char *protocol)
{
int found = 0;
const char **protos = h2_h2_is_tls(c)? h2_tls_protos : h2_clear_protos;
const char **p = protos;
(void)s;
while (*p) {
if (!strcmp(*p, protocol)) {
found = 1;
break;
}
p++;
}
if (found) {
h2_ctx *ctx = h2_ctx_get(c, 1);
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c,
"switching protocol to '%s'", protocol);
h2_ctx_protocol_set(ctx, protocol);
h2_ctx_server_set(ctx, s);
if (r != NULL) {
apr_status_t status;
/* Switching in the middle of a request means that
* we have to send out the response to this one in h2
* format. So we need to take over the connection
* right away.
*/
ap_remove_input_filter_byhandle(r->input_filters, "http_in");
ap_remove_input_filter_byhandle(r->input_filters, "reqtimeout");
ap_remove_output_filter_byhandle(r->output_filters, "HTTP_HEADER");
/* Ok, start an h2_conn on this one. */
h2_ctx_server_set(ctx, r->server);
status = h2_conn_setup(ctx, r->connection, r);
if (status != APR_SUCCESS) {
ap_log_rerror(APLOG_MARK, APLOG_DEBUG, status, r, APLOGNO(03088)
"session setup");
return status;
}
h2_conn_run(ctx, c);
return DONE;
}
return DONE;
}
return DECLINED;
}
apr_status_t h2_task_do(h2_task *task, h2_worker *worker)
{
apr_status_t status = APR_SUCCESS;
h2_config *cfg = h2_config_get(task->mplx->c);
h2_task_env env;
AP_DEBUG_ASSERT(task);
memset(&env, 0, sizeof(env));
env.id = task->id;
env.stream_id = task->stream_id;
env.mplx = task->mplx;
task->mplx = NULL;
env.input_eos = task->input_eos;
env.serialize_headers = !!h2_config_geti(cfg, H2_CONF_SER_HEADERS);
/* Create a subpool from the worker one to be used for all things
* with life-time of this task_env execution.
*/
apr_pool_create(&env.pool, h2_worker_get_pool(worker));
/* Link the env to the worker which provides useful things such
* as mutex, a socket etc. */
env.io = h2_worker_get_cond(worker);
/* Clone fields, so that lifetimes become (more) independent. */
env.method = apr_pstrdup(env.pool, task->method);
env.path = apr_pstrdup(env.pool, task->path);
env.authority = apr_pstrdup(env.pool, task->authority);
env.headers = apr_table_clone(env.pool, task->headers);
/* Setup the pseudo connection to use our own pool and bucket_alloc */
if (task->c) {
env.c = *task->c;
task->c = NULL;
status = h2_conn_setup(&env, worker);
}
else {
status = h2_conn_init(&env, worker);
}
/* save in connection that this one is a pseudo connection, prevents
* other hooks from messing with it. */
h2_ctx_create_for(&env.c, &env);
if (status == APR_SUCCESS) {
env.input = h2_task_input_create(&env, env.pool,
env.c.bucket_alloc);
env.output = h2_task_output_create(&env, env.pool,
env.c.bucket_alloc);
status = h2_conn_process(&env.c, h2_worker_get_socket(worker));
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, status, &env.c,
"h2_task(%s): processing done", env.id);
}
else {
ap_log_cerror(APLOG_MARK, APLOG_WARNING, status, &env.c,
"h2_task(%s): error setting up h2_task_env", env.id);
}
if (env.input) {
h2_task_input_destroy(env.input);
env.input = NULL;
}
if (env.output) {
h2_task_output_close(env.output);
h2_task_output_destroy(env.output);
env.output = NULL;
}
h2_task_set_finished(task);
if (env.io) {
apr_thread_cond_signal(env.io);
}
if (env.pool) {
apr_pool_destroy(env.pool);
env.pool = NULL;
}
if (env.c.id) {
h2_conn_post(&env.c, worker);
}
h2_mplx_task_done(env.mplx, env.stream_id);
return status;
}
int h2_h2_process_conn(conn_rec* c)
{
apr_status_t status;
h2_ctx *ctx;
if (c->master) {
return DECLINED;
}
ctx = h2_ctx_get(c, 0);
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "h2_h2, process_conn");
if (h2_ctx_is_task(ctx)) {
/* our stream pseudo connection */
ap_log_cerror(APLOG_MARK, APLOG_TRACE2, 0, c, "h2_h2, task, declined");
return DECLINED;
}
if (!ctx && c->keepalives == 0) {
const char *proto = ap_get_protocol(c);
if (APLOGctrace1(c)) {
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "h2_h2, process_conn, "
"new connection using protocol '%s', direct=%d, "
"tls acceptable=%d", proto, h2_allows_h2_direct(c),
h2_is_acceptable_connection(c, 1));
}
if (!strcmp(AP_PROTOCOL_HTTP1, proto)
&& h2_allows_h2_direct(c)
&& h2_is_acceptable_connection(c, 1)) {
/* Fresh connection still is on http/1.1 and H2Direct is enabled.
* Otherwise connection is in a fully acceptable state.
* -> peek at the first 24 incoming bytes
*/
apr_bucket_brigade *temp;
char *s = NULL;
apr_size_t slen;
temp = apr_brigade_create(c->pool, c->bucket_alloc);
status = ap_get_brigade(c->input_filters, temp,
AP_MODE_SPECULATIVE, APR_BLOCK_READ, 24);
if (status != APR_SUCCESS) {
ap_log_cerror(APLOG_MARK, APLOG_DEBUG, status, c, APLOGNO(03054)
"h2_h2, error reading 24 bytes speculative");
apr_brigade_destroy(temp);
return DECLINED;
}
apr_brigade_pflatten(temp, &s, &slen, c->pool);
if ((slen >= 24) && !memcmp(H2_MAGIC_TOKEN, s, 24)) {
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c,
"h2_h2, direct mode detected");
if (!ctx) {
ctx = h2_ctx_get(c, 1);
}
h2_ctx_protocol_set(ctx, h2_h2_is_tls(c)? "h2" : "h2c");
}
else {
ap_log_cerror(APLOG_MARK, APLOG_TRACE2, 0, c,
"h2_h2, not detected in %d bytes: %s",
(int)slen, s);
}
apr_brigade_destroy(temp);
}
}
if (ctx) {
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "process_conn");
if (!h2_ctx_session_get(ctx)) {
status = h2_conn_setup(ctx, c, NULL);
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, status, c, "conn_setup");
if (status != APR_SUCCESS) {
h2_ctx_clear(c);
return status;
}
}
return h2_conn_run(ctx, c);
}
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "h2_h2, declined");
return DECLINED;
}
apr_status_t h2_task_do(h2_task *task, h2_worker *worker)
{
apr_status_t status = APR_SUCCESS;
h2_config *cfg = h2_config_get(task->mplx->c);
AP_DEBUG_ASSERT(task);
task->serialize_headers = h2_config_geti(cfg, H2_CONF_SER_HEADERS);
/* Create a subpool from the worker one to be used for all things
* with life-time of this task execution.
*/
apr_pool_create(&task->pool, h2_worker_get_pool(worker));
/* Link the task to the worker which provides useful things such
* as mutex, a socket etc. */
task->io = h2_worker_get_cond(worker);
status = h2_conn_setup(task, worker);
/* save in connection that this one is a pseudo connection, prevents
* other hooks from messing with it. */
h2_ctx_create_for(task->c, task);
if (status == APR_SUCCESS) {
task->input = h2_task_input_create(task, task->pool,
task->c->bucket_alloc);
task->output = h2_task_output_create(task, task->pool,
task->c->bucket_alloc);
status = h2_conn_process(task->c, h2_worker_get_socket(worker));
ap_log_cerror(APLOG_MARK, APLOG_TRACE1, status, task->c,
"h2_task(%s): processing done", task->id);
}
else {
ap_log_cerror(APLOG_MARK, APLOG_WARNING, status, task->c,
APLOGNO(02957) "h2_task(%s): error setting up h2_task",
task->id);
}
if (task->input) {
h2_task_input_destroy(task->input);
task->input = NULL;
}
if (task->output) {
h2_task_output_close(task->output);
h2_task_output_destroy(task->output);
task->output = NULL;
}
if (task->io) {
apr_thread_cond_signal(task->io);
}
if (task->pool) {
apr_pool_destroy(task->pool);
task->pool = NULL;
}
if (task->c->id) {
h2_conn_post(task->c, worker);
}
h2_mplx_task_done(task->mplx, task->stream_id);
return status;
}
