/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static void do_signal(struct pt_regs *regs)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return;
signr = get_signal_to_deliver(&info, &ka, regs, 0);
if (signr > 0) {
handle_syscall_restart(regs, &ka.sa);
/* Whee! Actually deliver the signal. */
handle_signal(signr, &info, &ka, regs);
return;
}
/* Did we come from a system call? */
if (regs->syscall_nr >= 0) {
/* Restart the system call - no handlers present */
switch (regs->regs[REG_RET]) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
/* Decode Syscall # */
regs->regs[REG_RET] = regs->syscall_nr;
regs->pc -= 4;
break;
case -ERESTART_RESTARTBLOCK:
regs->regs[REG_RET] = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
/* No signal to deliver -- put the saved sigmask back */
restore_saved_sigmask();
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static void do_signal(struct pt_regs *regs, unsigned int save_r0)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
handle_syscall_restart(save_r0, regs, &ka.sa);
/* Whee! Actually deliver the signal. */
handle_signal(signr, &ka, &info, regs, save_r0);
return;
}
/* Did we come from a system call? */
if (regs->tra >= 0) {
/* Restart the system call - no handlers present */
if (regs->regs[0] == -ERESTARTNOHAND ||
regs->regs[0] == -ERESTARTSYS ||
regs->regs[0] == -ERESTARTNOINTR) {
regs->regs[0] = save_r0;
regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
} else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
regs->regs[3] = __NR_restart_syscall;
}
}
/*
* If there's no signal to deliver, we just put the saved sigmask
* back.
*/
restore_saved_sigmask();
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static void do_signal(struct pt_regs *regs, unsigned int save_r0)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
sigset_t *oldset;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return;
if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
handle_syscall_restart(save_r0, regs, &ka.sa);
/* Whee! Actually deliver the signal. */
if (handle_signal(signr, &ka, &info, oldset,
regs, save_r0) == 0) {
/*
* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TS_RESTORE_SIGMASK flag
*/
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
tracehook_signal_handler(signr, &info, &ka, regs,
test_thread_flag(TIF_SINGLESTEP));
}
return;
}
/* Did we come from a system call? */
if (regs->tra >= 0) {
/* Restart the system call - no handlers present */
if (regs->regs[0] == -ERESTARTNOHAND ||
regs->regs[0] == -ERESTARTSYS ||
regs->regs[0] == -ERESTARTNOINTR) {
regs->regs[0] = save_r0;
regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
} else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
regs->regs[3] = __NR_restart_syscall;
}
}
/*
* If there's no signal to deliver, we just put the saved sigmask
* back.
*/
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 1;
if (try_to_freeze())
goto no_signal;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else if (!oldset)
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, 0);
if (signr > 0) {
handle_syscall_restart(regs, &ka.sa);
/* Whee! Actually deliver the signal. */
if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
/*
* If a signal was successfully delivered, the
* saved sigmask is in its frame, and we can
* clear the TIF_RESTORE_SIGMASK flag.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
tracehook_signal_handler(signr, &info, &ka, regs, 0);
return 1;
}
}
no_signal:
/* Did we come from a system call? */
if (regs->syscall_nr >= 0) {
/* Restart the system call - no handlers present */
switch (regs->regs[REG_RET]) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
/* Decode Syscall # */
regs->regs[REG_RET] = regs->syscall_nr;
regs->pc -= 4;
break;
case -ERESTART_RESTARTBLOCK:
regs->regs[REG_RET] = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
/* No signal to deliver -- put the saved sigmask back */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
return 0;
}