static irqreturn_t hdmi_irq_handler(int irq, void *data)
{
struct hdmi_wp_data *wp = data;
u32 irqstatus;
irqstatus = hdmi_wp_get_irqstatus(wp);
hdmi_wp_set_irqstatus(wp, irqstatus);
if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
/*
* If we get both connect and disconnect interrupts at the same
* time, turn off the PHY, clear interrupts, and restart, which
* raises connect interrupt if a cable is connected, or nothing
* if cable is not connected.
*/
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
HDMI_IRQ_LINK_DISCONNECT);
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
} else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
} else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
}
return IRQ_HANDLED;
}
static irqreturn_t hdmi_irq_handler(int irq, void *data)
{
struct hdmi_wp_data *wp = data;
u32 irqstatus;
irqstatus = hdmi_wp_get_irqstatus(wp);
hdmi_wp_set_irqstatus(wp, irqstatus);
if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
u32 v;
/*
* If we get both connect and disconnect interrupts at the same
* time, turn off the PHY, clear interrupts, and restart, which
* raises connect interrupt if a cable is connected, or nothing
* if cable is not connected.
*/
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
/*
* We always get bogus CONNECT & DISCONNECT interrupts when
* setting the PHY to LDOON. To ignore those, we force the RXDET
* line to 0 until the PHY power state has been changed.
*/
v = hdmi_read_reg(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL);
v = FLD_MOD(v, 1, 15, 15); /* FORCE_RXDET_HIGH */
v = FLD_MOD(v, 0, 14, 7); /* RXDET_LINE */
hdmi_write_reg(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL, v);
hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
HDMI_IRQ_LINK_DISCONNECT);
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
REG_FLD_MOD(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL, 0, 15, 15);
} else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
} else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
}
return IRQ_HANDLED;
}
int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
struct hdmi_config *cfg)
{
u16 r = 0;
u32 irqstatus;
hdmi_wp_clear_irqenable(wp, 0xffffffff);
irqstatus = hdmi_wp_get_irqstatus(wp);
hdmi_wp_set_irqstatus(wp, irqstatus);
r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
if (r)
return r;
/*
* Read address 0 in order to get the SCP reset done completed
* Dummy access performed to make sure reset is done
*/
hdmi_read_reg(phy->base, HDMI_TXPHY_TX_CTRL);
/*
* Write to phy address 0 to configure the clock
* use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
*/
REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
/* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
hdmi_write_reg(phy->base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
/* Setup max LDO voltage */
REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
/* Write to phy address 3 to change the polarity control */
REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
r = request_threaded_irq(phy->irq, NULL, hdmi_irq_handler,
IRQF_ONESHOT, "OMAP HDMI", wp);
if (r) {
DSSERR("HDMI IRQ request failed\n");
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
return r;
}
hdmi_wp_set_irqenable(wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
r = hdmi_power_on_core(dssdev);
if (r)
return r;
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
hdmi_pll_compute(&hdmi.pll, p->pixelclock, &hdmi_cinfo);
/* disable and clear irqs */
hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
hdmi_wp_set_irqstatus(&hdmi.wp,
hdmi_wp_get_irqstatus(&hdmi.wp));
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi5_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
hdmi_wp_set_irqenable(&hdmi.wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_mgr_enable:
hdmi_wp_video_stop(&hdmi.wp);
err_vid_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
enum omap_channel channel = dssdev->dispc_channel;
struct hdmi_wp_data *wp = &hdmi.wp;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
unsigned pc;
r = hdmi_power_on_core(dssdev);
if (r)
return r;
/* disable and clear irqs */
hdmi_wp_clear_irqenable(wp, 0xffffffff);
hdmi_wp_set_irqstatus(wp, 0xffffffff);
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
pc = p->pixelclock;
if (p->double_pixel)
pc *= 2;
hdmi_pll_compute(&hdmi.pll, pc, &hdmi_cinfo);
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to configure PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi4_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(channel, p);
r = dss_mgr_enable(channel);
if (r)
goto err_mgr_enable;
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
hdmi_wp_set_irqenable(wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_vid_enable:
dss_mgr_disable(channel);
err_mgr_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
r = hdmi_power_on_core(dssdev);
if (r)
return r;
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
hdmi_pll_compute(&hdmi.pll, p->pixelclock, &hdmi_cinfo);
/* disable and clear irqs */
hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
hdmi_wp_set_irqstatus(&hdmi.wp,
hdmi_wp_get_irqstatus(&hdmi.wp));
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi5_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
/*
* XXX Seems that on we easily get a flood of sync-lost errors when
* enabling the output. This seems to be related to the time between
* HDMI VSYNC and enabling the DISPC output.
*
* Testing shows that the sync-lost errors do not happen if we enable
* the DISPC output very soon after HDMI VBLANK. So wait here for
* VBLANK to reduce the chances of sync-losts.
*/
hdmi_write_reg(hdmi.wp.base, HDMI_WP_IRQSTATUS, HDMI_IRQ_VIDEO_VSYNC);
while (true) {
u32 v = hdmi_read_reg(hdmi.wp.base, HDMI_WP_IRQSTATUS_RAW);
if (v & HDMI_IRQ_VIDEO_VSYNC)
break;
usleep_range(500, 1000);
}
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
hdmi_wp_set_irqenable(&hdmi.wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_mgr_enable:
hdmi_wp_video_stop(&hdmi.wp);
err_vid_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
