/************************************************************************//**
* \brief Connects this instance to a Manta
* \param connectionSerial The serial number of the manta to search for.
*
* If connectionSerial is left out or given as 0 then any connected Manta will
* match. If a serial number is given then libmanta will attempt to connect to
* that Manta. If no matching manta is found then Connect will throw a
* MantaNotFoundException. If no exception is thrown then the connection can be
* assumed to have been successful.
*
****************************************************************************/
void MantaUSB::Connect(int connectionSerial)
{
#define SERIAL_STRING_SIZE 32
wchar_t serialString[SERIAL_STRING_SIZE];
if(IsConnected())
{
return;
}
DebugPrint("%s-%d: Attempting to Connect to Manta %d...",
__FILE__, __LINE__, connectionSerial);
if(connectionSerial)
{
swprintf(serialString, SERIAL_STRING_SIZE, L"%d", connectionSerial);
DeviceHandle = hid_open(VendorID, ProductID, serialString);
}
else
{
DeviceHandle = hid_open(VendorID, ProductID, NULL);
}
if(NULL == DeviceHandle)
throw(MantaNotFoundException());
hid_get_serial_number_string(DeviceHandle, serialString, SERIAL_STRING_SIZE);
SerialNumber = wcstol(serialString, NULL, 10);
hid_set_nonblocking(DeviceHandle, 1);
}
int HidController::open() {
if (isOpen()) {
qDebug() << "HID device" << getName() << "already open";
return -1;
}
// Open device by path
if (debugging()) {
qDebug() << "Opening HID device"
<< getName() << "by HID path" << hid_path;
}
m_pHidDevice = hid_open_path(hid_path);
// If that fails, try to open device with vendor/product/serial #
if (m_pHidDevice == NULL) {
if (debugging())
qDebug() << "Failed. Trying to open with make, model & serial no:"
<< hid_vendor_id << hid_product_id << hid_serial;
m_pHidDevice = hid_open(hid_vendor_id, hid_product_id, hid_serial_raw);
}
// If it does fail, try without serial number WARNING: This will only open
// one of multiple identical devices
if (m_pHidDevice == NULL) {
qWarning() << "Unable to open specific HID device" << getName()
<< "Trying now with just make and model."
<< "(This may only open the first of multiple identical devices.)";
m_pHidDevice = hid_open(hid_vendor_id, hid_product_id, NULL);
}
// If that fails, we give up!
if (m_pHidDevice == NULL) {
qWarning() << "Unable to open HID device" << getName();
return -1;
}
setOpen(true);
startEngine();
if (m_pReader != NULL) {
qWarning() << "HidReader already present for" << getName();
} else {
m_pReader = new HidReader(m_pHidDevice);
m_pReader->setObjectName(QString("HidReader %1").arg(getName()));
connect(m_pReader, SIGNAL(incomingData(QByteArray)),
this, SLOT(receive(QByteArray)));
// Controller input needs to be prioritized since it can affect the
// audio directly, like when scratching
m_pReader->start(QThread::HighPriority);
}
return 0;
}
/**
* @brief tries to open the MSI gaming notebook's SteelSeries keyboard
* @returns a corresponding hid_device, null if the keyboard was not detected
*/
hid_device* open_keyboard()
{
if (hid_init() == 0)
return hid_open(0x1770, 0xff00, 0);
else
return NULL;
}
int cb_panel_open() {
printf("\n\n\n\n\n\n\n\n\n\n\n");
int res = 0;
cbHandle = hid_open(CB_VENDOR_ID, CB_PROD_ID, NULL);
if (!cbHandle) {
printf("-> CP: cb_driver.panel_open: unable to open device.\n");
return -1;
}
wchar_t wstr[MAX_STR];
res = hid_get_manufacturer_string(cbHandle, wstr, MAX_STR);
sprintf(tmp, "-> CP: cb_driver.panel_open: Manufacturer String %ls\n", wstr);
printf(tmp);
cb_panel_read_non_blocking(tempInbuf);
cb_panel_read_non_blocking(tempInbuf);
cb_panel_read_non_blocking(tempInbuf);
res = cb_panel_write(cb_blank_panel);
// res = hid_send_feature_report(cbHandle, cb_blank_panel, CB_OUT_BUF_SIZE);
if (res < 0) {
sprintf(tmp, "-> CP: cb_driver.panel_open: Error: %ls\n", hid_error(
cbHandle));
printf(tmp);
}
return 0;
}
SwitchPanel::SwitchPanel()
{
handle = hid_open(0x06a3, 0x0d67, NULL);
oapiWriteLog("Device opened");
// Set the hid_read() function to be non-blocking.
hid_set_nonblocking(handle, 1);
}
int main( int argc, char* argv[] )
{
unsigned char buf[2];
hid_device *handle;
int res;
// Space Navigator: 046d c626
handle = hid_open( 0x046d, 0xc626, NULL );
if ( handle == NULL ) {
printf( "spacenav-rezero: Could not open HID device (got sudo?)\n" );
exit( EXIT_FAILURE );
}
buf[0] = 0x07; // This proprietary(?) feature report will rezero the device.
buf[1] = 0x00;
res = hid_send_feature_report( handle, buf, sizeof(buf) );
if ( res != sizeof(buf) ) {
printf( "spacenav-rezero: Write failed\n" );
exit( EXIT_FAILURE );
}
hid_close( handle );
return EXIT_SUCCESS;
}
//-----------------------------------------------------------------------------
void dbg_open(debugger_t *debugger)
{
handle = hid_open(debugger->vid, debugger->pid, debugger->wserial);
if (!handle)
perror_exit("unable to open device");
}
bool RawHID::open(OpenMode mode)
{
QMutexLocker locker(m_mutex);
int res;
hid_device *handle;
// Initialize the hidapi library (safe to call multiple times)
res = hid_init();
// Open the device using the VID, PID
handle = hid_open(m_deviceInfo->getVendorID(), m_deviceInfo->getProductID(), NULL);
if (handle) {
m_handle = handle;
m_writeThread = new RawHIDWriteThread(this);
m_readThread = new RawHIDReadThread(this);
m_readThread->start();
m_writeThread->start();
} else {
qDebug() << "Failed to open USB device";
}
return QIODevice::open(mode);
}
hid_device* get_inkling_device()
{
const int wacomVendorID = 0x056a;
const int wacomInclingID = 0x0221;
//Find device using hidapi
#define MAX_STR 255
hid_device *found = NULL;
// Enumerate and print the HID devices on the system
struct hid_device_info *devs, *cur_dev;
devs = hid_enumerate(0x0, 0x0);
cur_dev = devs;
while (cur_dev) {
if(cur_dev->vendor_id == wacomVendorID && cur_dev->product_id == wacomInclingID){
found = hid_open(cur_dev->vendor_id, cur_dev->product_id, NULL);
if(found == NULL)
puts("Failed to open hid to Inkling");
break;
}
cur_dev = cur_dev->next;
}
hid_free_enumeration(devs);
if(found == NULL){
puts("Inkling device not found");
}
return found;
}
int mcp_panel_open() {
int res = 0;
mcpHandle = hid_open(VENDOR_ID, MCP_PROD_ID, NULL);
if (!mcpHandle) {
XPLMDebugString("-> CP: mcp_driver.panel_open: unable to open device.\n");
return -1;
}
wchar_t wstr[MAX_STR];
res = hid_get_manufacturer_string(mcpHandle, wstr, MAX_STR);
sprintf(tmp, "-> CP: mcp_driver.panel_open: Manufacturer String %ls\n", wstr);
XPLMDebugString(tmp);
hid_set_nonblocking(mcpHandle, 1);
res = hid_read(mcpHandle, mcp_in_buf, MCP_IN_BUF_SIZE);
if (res < 0) {
sprintf(tmp, "-> CP: mcp_driver.panel_open: Error: %ls\n", hid_error(mcpHandle));
XPLMDebugString(tmp);
}
res = hid_send_feature_report(mcpHandle, mcp_all_on_panel, sizeof(mcp_all_on_panel));
res = hid_send_feature_report(mcpHandle, mcp_course_left, sizeof(mcp_course_left));
res = hid_send_feature_report(mcpHandle, mcp_course_right, sizeof(mcp_course_right));
res = hid_send_feature_report(mcpHandle, mcp_ias_mach, sizeof(mcp_ias_mach));
res = hid_send_feature_report(mcpHandle, mcp_heading, sizeof(mcp_heading));
res = hid_send_feature_report(mcpHandle, mcp_altitude, sizeof(mcp_altitude));
res = hid_send_feature_report(mcpHandle, mcp_vert_speed, sizeof(mcp_vert_speed));
if (res < 0) {
sprintf(tmp, "-> CP: mcp_driver.panel_open: Error: %ls\n", hid_error(mcpHandle));
XPLMDebugString(tmp);
}
return 0;
}
void Sbs2EmocapDataReader::resetHandle()
{
#ifdef Q_OS_MAC
hid_close(handle);
hid_exit();
handle = hid_open(0x1234, 0xed02, NULL);
#endif
}
void USBInterface::HIDOpen(const unsigned short VendorID, const unsigned short ProductID)
{
if(!HIDisOpen)
{
DeviceHandle = hid_open(VendorID, ProductID, NULL);
if(DeviceHandle)HIDisOpen= true;
}
}
int main(int argc, char* argv[])
{
int res;
int i;
// Initialize the hidapi library
printf("Starting to initialize HID library...\n");
res = hid_init();
printf("Initialized HID library.\n");
// Open the device using the VID, PID,
// and optionally the Serial number.
printf("Trying to open device...\n");
handle = hid_open(0x04d8, 0x003f, NULL);
if(handle != NULL) {
printf("Opened device successfully.\n");
} else {
printf("Could not open device.\n");
exit(EXIT_FAILURE);
}
read_device_info();
toggle_led1();
printf("Button is %spressed.\n", get_push1_state() ? "" : "not ");
printf("The decimal result is %d\n", get_pot1_val());
// Register signal handler
if (signal(SIGINT, sig_handler) == SIG_ERR) {
printf("\nCan't catch SIGINT\n");
exit(EXIT_FAILURE);
}
// Enter ncurses mode
initialize_display();
// Main loop
while(1) {
int a;
a = (int)((100 / 1023.0) * get_pot1_val());
print_percent_bar(2, a);
refresh();
sleep(0.1);
}
// Leave ncurses mode
end_display();
// Unregister signal handler
signal(SIGINT, SIG_DFL);
// Finalize the hidapi library
res = hid_exit();
return 0;
}
int main(int argc, char* argv[])
{
int res;
unsigned char buf[RELAY_COMMAND_SIZE];
hid_device *handle;
unsigned char command;
if (argc != 2) {
fprintf(stderr, "usage: %s [on|off]\n", argv[0]);
exit(1);
}
if (strcmp(argv[1], "on") == 0) {
command = RELAY_STATE_ON;
} else if (strcmp(argv[1], "off") == 0) {
command = RELAY_STAT_OFF;
} else if (strcmp(argv[1], "scan") == 0) {
return doScan();
} else {
fprintf(stderr, "usage: %s [on|off]\n", argv[0]);
exit(1);
}
if (hid_init()) {
fprintf(stderr, "can't init hid lib\n");
exit(1);
}
// Set up the command buffer.
memset(buf,0x00,sizeof(buf));
buf[1] = command;
buf[2] = RELAY_NUMBER;
// Open the device using the VID, PID,
// and optionally the Serial number.
////handle = hid_open(0x4d8, 0x3f, L"12345");
handle = hid_open(RELAY_VENDOR_ID, RELAY_PRODUCT_ID, NULL);
if (!handle) {
printf("unable to open device\n");
return 1;
}
res = hid_write(handle, buf, sizeof(buf));
if (res < 0) {
printf("Unable to send command\n");
}
hid_close(handle);
/* Free static HIDAPI objects. */
hid_exit();
exit(0);
}
int
open_dev(dldev_t *dev)
{
dev->usb.handle = hid_open(VENDOR_ID, PRODUCT_ID, NULL);
if(dev->usb.handle == NULL) {
ERROR("could not open device in open_dev()");
return -1;
}
return 0;
}
glowproxy_device* Open(void)
{
glowproxy_device* handle;
handle = hid_open(VENDOR_ID, PRODUCT_ID, NULL);
if (!handle) {
//printf("unable to open device\n");
return NULL;
}
return handle;
}
Keyboard::Keyboard() :
m_dev(NULL)
{
m_dev = hid_open(0x1770, 0xff00, 0);
if(!m_dev) {
std::cout << "cannot open usb device" << std::endl;
QTimer::singleShot(0, qApp, SLOT(quit()));
return;
}
}
void HID_PnP::PollUSB()
{
buf[0] = 0x00;
memset((void*)&buf[2], 0x00, sizeof(buf) - 2);
if (isConnected == false) {
device = hid_open(0x04d8, 0x003f, NULL);
if (device) {
isConnected = true;
hid_set_nonblocking(device, true);
timer->start(15);
}
}
else {
if(toggleLeds == true) {
toggleLeds = false;
buf[1] = 0x80;
if (hid_write(device, buf, sizeof(buf)) == -1)
{
CloseDevice();
return;
}
buf[0] = 0x00;
buf[1] = 0x37;
memset((void*)&buf[2], 0x00, sizeof(buf) - 2);
}
if (hid_write(device, buf, sizeof(buf)) == -1)
{
CloseDevice();
return;
}
if(hid_read(device, buf, sizeof(buf)) == -1)
{
CloseDevice();
return;
}
if(buf[0] == 0x37) {
potentiometerValue = (buf[2]<<8) + buf[1];
buf[1] = 0x81;
}
else if(buf[0] == 0x81) {
pushbuttonStatus = (buf[1] == 0x00);
buf[1] = 0x37;
}
}
hid_comm_update(isConnected, pushbuttonStatus, potentiometerValue);
}
void TaquitoClient::connect(){
std::cerr << "connecting" << std::endl;
if(USBHandle)
disconnect();
USBHandle = hid_open(VENDOR_ID, DEVICE_ID, NULL); // attempt to open device
if(USBHandle) {
// if handle is set, then connection has been made
hid_set_nonblocking(USBHandle, 1); // set hid_read() in non-blocking mode
}else{
std::cerr << "connection failure" << std::endl;
throw TaquitoError();
}
}
int main(int argc, char const *argv[])
{
unsigned short vendor_id = 1027;
unsigned short product_id = 65448;
wchar_t *serial_number = NULL;
hid_device *dev = hid_open(vendor_id, product_id, serial_number);
if (hid_device != NULL)
{
}
return 0;
}
Comm::ErrorCode Comm::open(void)
{
boot_device = hid_open(VID, PID, NULL);
if(boot_device)
{
connected = true;
hid_set_nonblocking(boot_device, true);
qWarning("Device successfully connected to.");
return Success;
}
qWarning("Unable to open device.");
return NotConnected;
}
//--------------------------------------------------------------
void ofxPowerMate::conecta(){
// Open the device using the VID, PID,
// and optionally the Serial number.
handle = hid_open(0x077d, 0x0410, NULL);
// Read the Manufacturer String
res = hid_get_manufacturer_string(handle, wstr, 6);
printf("Manufacturer String: %ls\n", wstr);
// Set the hid_read() function to be non-blocking.
hid_set_nonblocking(handle, 1);
}
/*---------------------------------------------------------------------------*/
int t100::connectBasic()
{
this->t100_handle = hid_open(VID, PID, NULL);
if(!(this->t100_handle))
{
this->problem = true;
return -1;
}
else
{
return 0;
}
}
int USB_Open()
{
// Open the device using the VID, PID,
// and optionally the Serial number.
DeviceHandle = hid_open(MY_VID, MY_PID, NULL);
if(DeviceHandle == NULL)
{
USBConnected = false;
return -1;
}
USBConnected = true;
return 0;
}
bool UsbHid::open(unsigned short vendorId, unsigned short productId, QString serialNumberString)
{
close();
bool res = false;
hid_device *h;
wchar_t *serial = (serialNumberString.size() > 0) ? const_cast<wchar_t*>(serialNumberString.toStdWString().c_str()) : 0;
if ((h = hid_open(vendorId, productId, serial)) != 0)
{
hidDevice = h;
res = true;
}
return res;
}
int initializeUSB1208(){
ret = hid_init();
if (ret < 0) {
fprintf(stderr, "hid_init failed with return code %d\n", ret);
return -1;
}
if ((hid = hid_open(MCC_VID, USB1208LS_PID, NULL)) > 0) {
//printf("USB-1208LS Device is found!\n");
} else {
fprintf(stderr, "USB-1208LS not found.\n");
exit(1);
}
return 0;
}
/*---------------------------------------------------------------------------*/
int t100::connectBySerial(uint64_t serial)
{
wchar_t buf[16];
swprintf(buf, sizeof(buf) / sizeof(*buf), L"%llu", serial);
this->t100_handle = hid_open(VID, PID, buf);
if(!(this->t100_handle))
{
this->problem = true;
return -1;
}
else
{
this->mySerialNumber = serial;
return 0;
}
}
void init_pid(unsigned short vid, unsigned short pid) {
#ifdef OSX
hid_init();
dev = hid_open(vid, pid, NULL);
#else
struct hid_device_info *info = NULL, *ptr = NULL;
hid_init();
info = hid_enumerate(vid, pid);
ptr = info;
while (ptr != NULL) {
if (ptr->interface_number == 1) {
dev = hid_open_path(ptr->path);
break;
}
ptr = ptr->next;
}
hid_free_enumeration(info);
#endif
}
int initializeDevice() {
struct hid_device_info *devs, *cur_dev;
const wchar_t targetManufacturer[] = L"Wincor Nixdorf";
hid_init();
/* Auto-detection du périphérique */
//Wincor Nixdorf
devs = hid_enumerate(0x0, 0x0);
cur_dev = devs;
while (cur_dev) {
if (DEBUG) fprintf(stdout, "<Debug> Périphérique trouvé: %04hx %04hx - %ls - %s\n", cur_dev->vendor_id, cur_dev->product_id, cur_dev->manufacturer_string ,cur_dev->path);
#if defined(__APPLE__)
if (!wcscmp(targetManufacturer, cur_dev->manufacturer_string) ) {
fprintf(stdout, "<Pilote> Afficheur USB %04hx %04hx en cours d\'ouverture sur %s..\n", cur_dev->vendor_id, cur_dev->product_id, cur_dev->path);
display = hid_open(cur_dev->vendor_id, cur_dev->product_id, NULL);
break;
}
#elif defined(linux)
if (!wcscmp(targetManufacturer, cur_dev->manufacturer_string) && !strcmp(cur_dev->path+(strlen(cur_dev->path)-2), "01")) {
fprintf(stdout, "<Pilote> Afficheur USB %04hx %04hx en cours d\'ouverture sur %s..\n", cur_dev->vendor_id, cur_dev->product_id, cur_dev->path);
display = hid_open_path(cur_dev->path);
break;
}
#else
fprintf(stderr, "<Fatal> Ce système n'est pas (encore) supporté pour l'instant!\n");
exit(-1);
#endif
cur_dev = cur_dev->next;
}
hid_free_enumeration(devs);
if (!display) return 0;
hid_get_product_string(display, moduleName, MAX_STR);
if (DEBUG) fprintf(stdout, "<Info> Connected to \"%ls\" display.\n", moduleName);
return display!=NULL;
}
int main(int argc, char* argv[]){
hid_device *handle;
unsigned char resbuf[8];
if(argc < 3){
usage();
return 1;
}
host = argv[1];
port = atoi(argv[2]);
printf("Opening ONTRAK device...\n");
handle = hid_open(VENDOR_ID, DEVICE_ID, NULL);
hid_set_nonblocking(handle, 0); //blocking mode ftw
printf("Device opened and set to blocking mode.");
UdpTransmitSocket transmitSocket( IpEndpointName( host, port ) );
while(true){
send_ontrak_command(handle);
int res = hid_read(handle, resbuf, 8);
if(res <= 0){
printf("ERROR reading\n");
}
else{
fprintf(stdout, ".");
fflush(stdout);
if(++dots > 80){
printf("\n");
dots = 0;
}
int state = atoi((const char*)resbuf+1);
// printf("%d\n", state);
if(state != last_state){
last_state = state;
send_osc(transmitSocket, state);
}
}
usleep(POLL_SLEEP_MS * 1000);
}
}