/**
* ap_handle_timer - Per STA timer handler
* @eloop_ctx: struct hostapd_data *
* @timeout_ctx: struct sta_info *
*
* This function is called to check station activity and to remove inactive
* stations.
*/
void ap_handle_timer(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
unsigned long next_time = 0;
wpa_printf(MSG_DEBUG, "%s: " MACSTR " flags=0x%x timeout_next=%d",
__func__, MAC2STR(sta->addr), sta->flags,
sta->timeout_next);
if (sta->timeout_next == STA_REMOVE) {
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "deauthenticated due to "
"local deauth request");
ap_free_sta(hapd, sta);
return;
}
if ((sta->flags & WLAN_STA_ASSOC) &&
(sta->timeout_next == STA_NULLFUNC ||
sta->timeout_next == STA_DISASSOC)) {
int inactive_sec;
/*
* Add random value to timeout so that we don't end up bouncing
* all stations at the same time if we have lots of associated
* stations that are idle (but keep re-associating).
*/
int fuzz = os_random() % 20;
inactive_sec = hostapd_drv_get_inact_sec(hapd, sta->addr);
if (inactive_sec == -1) {
wpa_msg(hapd->msg_ctx, MSG_DEBUG,
"Check inactivity: Could not "
"get station info from kernel driver for "
MACSTR, MAC2STR(sta->addr));
/*
* The driver may not support this functionality.
* Anyway, try again after the next inactivity timeout,
* but do not disconnect the station now.
*/
next_time = hapd->conf->ap_max_inactivity + fuzz;
} else if (inactive_sec < hapd->conf->ap_max_inactivity &&
sta->flags & WLAN_STA_ASSOC) {
/* station activity detected; reset timeout state */
wpa_msg(hapd->msg_ctx, MSG_DEBUG,
"Station " MACSTR " has been active %is ago",
MAC2STR(sta->addr), inactive_sec);
sta->timeout_next = STA_NULLFUNC;
next_time = hapd->conf->ap_max_inactivity + fuzz -
inactive_sec;
} else {
wpa_msg(hapd->msg_ctx, MSG_DEBUG,
"Station " MACSTR " has been "
"inactive too long: %d sec, max allowed: %d",
MAC2STR(sta->addr), inactive_sec,
hapd->conf->ap_max_inactivity);
if (hapd->conf->skip_inactivity_poll)
sta->timeout_next = STA_DISASSOC;
}
}
if ((sta->flags & WLAN_STA_ASSOC) &&
sta->timeout_next == STA_DISASSOC &&
!(sta->flags & WLAN_STA_PENDING_POLL) &&
!hapd->conf->skip_inactivity_poll) {
wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR
" has ACKed data poll", MAC2STR(sta->addr));
/* data nullfunc frame poll did not produce TX errors; assume
* station ACKed it */
sta->timeout_next = STA_NULLFUNC;
next_time = hapd->conf->ap_max_inactivity;
}
if (next_time) {
wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
"for " MACSTR " (%lu seconds)",
__func__, MAC2STR(sta->addr), next_time);
eloop_register_timeout(next_time, 0, ap_handle_timer, hapd,
sta);
return;
}
if (sta->timeout_next == STA_NULLFUNC &&
(sta->flags & WLAN_STA_ASSOC)) {
wpa_printf(MSG_DEBUG, " Polling STA");
sta->flags |= WLAN_STA_PENDING_POLL;
hostapd_drv_poll_client(hapd, hapd->own_addr, sta->addr,
sta->flags & WLAN_STA_WMM);
} else if (sta->timeout_next != STA_REMOVE) {
int deauth = sta->timeout_next == STA_DEAUTH;
wpa_dbg(hapd->msg_ctx, MSG_DEBUG,
"Timeout, sending %s info to STA " MACSTR,
deauth ? "deauthentication" : "disassociation",
MAC2STR(sta->addr));
if (deauth) {
hostapd_drv_sta_deauth(
hapd, sta->addr,
WLAN_REASON_PREV_AUTH_NOT_VALID);
} else {
hostapd_drv_sta_disassoc(
hapd, sta->addr,
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
}
}
switch (sta->timeout_next) {
case STA_NULLFUNC:
sta->timeout_next = STA_DISASSOC;
wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
"for " MACSTR " (%d seconds - AP_DISASSOC_DELAY)",
__func__, MAC2STR(sta->addr), AP_DISASSOC_DELAY);
eloop_register_timeout(AP_DISASSOC_DELAY, 0, ap_handle_timer,
hapd, sta);
break;
case STA_DISASSOC:
ap_sta_set_authorized(hapd, sta, 0);
sta->flags &= ~WLAN_STA_ASSOC;
ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
if (!sta->acct_terminate_cause)
sta->acct_terminate_cause =
RADIUS_ACCT_TERMINATE_CAUSE_IDLE_TIMEOUT;
accounting_sta_stop(hapd, sta);
ieee802_1x_free_station(sta);
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "disassociated due to "
"inactivity");
sta->timeout_next = STA_DEAUTH;
wpa_printf(MSG_DEBUG, "%s: register ap_handle_timer timeout "
"for " MACSTR " (%d seconds - AP_DEAUTH_DELAY)",
__func__, MAC2STR(sta->addr), AP_DEAUTH_DELAY);
eloop_register_timeout(AP_DEAUTH_DELAY, 0, ap_handle_timer,
hapd, sta);
mlme_disassociate_indication(
hapd, sta, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
break;
case STA_DEAUTH:
case STA_REMOVE:
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "deauthenticated due to "
"inactivity (timer DEAUTH/REMOVE)");
if (!sta->acct_terminate_cause)
sta->acct_terminate_cause =
RADIUS_ACCT_TERMINATE_CAUSE_IDLE_TIMEOUT;
mlme_deauthenticate_indication(
hapd, sta,
WLAN_REASON_PREV_AUTH_NOT_VALID);
ap_free_sta(hapd, sta);
break;
}
}
/**
* ap_handle_timer - Per STA timer handler
* @eloop_ctx: struct hostapd_data *
* @timeout_ctx: struct sta_info *
*
* This function is called to check station activity and to remove inactive
* stations.
*/
void ap_handle_timer(void *eloop_ctx, void *timeout_ctx)
{
struct hostapd_data *hapd = eloop_ctx;
struct sta_info *sta = timeout_ctx;
unsigned long next_time = 0;
if (sta->timeout_next == STA_REMOVE) {
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "deauthenticated due to "
"local deauth request");
ap_free_sta(hapd, sta);
return;
}
if ((sta->flags & WLAN_STA_ASSOC) &&
(sta->timeout_next == STA_NULLFUNC ||
sta->timeout_next == STA_DISASSOC)) {
int inactive_sec;
inactive_sec = hostapd_drv_get_inact_sec(hapd, sta->addr);
if (inactive_sec == -1) {
wpa_msg(hapd, MSG_DEBUG, "Check inactivity: Could not "
"get station info rom kernel driver for "
MACSTR, MAC2STR(sta->addr));
} else if (inactive_sec < hapd->conf->ap_max_inactivity &&
sta->flags & WLAN_STA_ASSOC) {
/* station activity detected; reset timeout state */
wpa_msg(hapd, MSG_DEBUG, "Station " MACSTR " has been "
"active %is ago",
MAC2STR(sta->addr), inactive_sec);
sta->timeout_next = STA_NULLFUNC;
next_time = hapd->conf->ap_max_inactivity -
inactive_sec;
} else {
wpa_msg(hapd, MSG_DEBUG, "Station " MACSTR " has been "
"inactive too long: %d sec, max allowed: %d",
MAC2STR(sta->addr), inactive_sec,
hapd->conf->ap_max_inactivity);
}
}
if ((sta->flags & WLAN_STA_ASSOC) &&
sta->timeout_next == STA_DISASSOC &&
!(sta->flags & WLAN_STA_PENDING_POLL)) {
wpa_msg(hapd, MSG_DEBUG, "Station " MACSTR " has ACKed data "
"poll", MAC2STR(sta->addr));
/* data nullfunc frame poll did not produce TX errors; assume
* station ACKed it */
sta->timeout_next = STA_NULLFUNC;
next_time = hapd->conf->ap_max_inactivity;
}
if (next_time) {
eloop_register_timeout(next_time, 0, ap_handle_timer, hapd,
sta);
return;
}
if (sta->timeout_next == STA_NULLFUNC &&
(sta->flags & WLAN_STA_ASSOC)) {
#ifndef CONFIG_NATIVE_WINDOWS
/* send data frame to poll STA and check whether this frame
* is ACKed */
struct {
struct ieee80211_hdr hdr;
u16 qos_ctl;
} STRUCT_PACKED nulldata;
int size = sizeof(struct ieee80211_hdr);
wpa_printf(MSG_DEBUG, " Polling STA with data frame");
sta->flags |= WLAN_STA_PENDING_POLL;
os_memset(&nulldata, 0, sizeof(nulldata));
if (hapd->driver &&
os_strcmp(hapd->driver->name, "hostap") == 0) {
/*
* WLAN_FC_STYPE_NULLFUNC would be more appropriate,
* but it is apparently not retried so TX Exc events
* are not received for it.
*/
nulldata.hdr.frame_control =
IEEE80211_FC(WLAN_FC_TYPE_DATA,
WLAN_FC_STYPE_DATA);
} else {
if (sta->flags & WLAN_STA_WMM) {
nulldata.hdr.frame_control =
IEEE80211_FC(WLAN_FC_TYPE_DATA,
WLAN_FC_STYPE_QOS_NULL);
size = sizeof(nulldata);
} else
nulldata.hdr.frame_control =
IEEE80211_FC(WLAN_FC_TYPE_DATA,
WLAN_FC_STYPE_NULLFUNC);
}
nulldata.hdr.frame_control |= host_to_le16(WLAN_FC_FROMDS);
os_memcpy(nulldata.hdr.IEEE80211_DA_FROMDS, sta->addr,
ETH_ALEN);
os_memcpy(nulldata.hdr.IEEE80211_BSSID_FROMDS, hapd->own_addr,
ETH_ALEN);
os_memcpy(nulldata.hdr.IEEE80211_SA_FROMDS, hapd->own_addr,
ETH_ALEN);
if (hostapd_drv_send_mlme(hapd, &nulldata, size) < 0)
perror("ap_handle_timer: send");
#endif /* CONFIG_NATIVE_WINDOWS */
} else if (sta->timeout_next != STA_REMOVE) {
int deauth = sta->timeout_next == STA_DEAUTH;
wpa_printf(MSG_DEBUG, "Sending %s info to STA " MACSTR,
deauth ? "deauthentication" : "disassociation",
MAC2STR(sta->addr));
if (deauth) {
hostapd_drv_sta_deauth(
hapd, sta->addr,
WLAN_REASON_PREV_AUTH_NOT_VALID);
} else {
hostapd_drv_sta_disassoc(
hapd, sta->addr,
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
}
}
switch (sta->timeout_next) {
case STA_NULLFUNC:
sta->timeout_next = STA_DISASSOC;
eloop_register_timeout(AP_DISASSOC_DELAY, 0, ap_handle_timer,
hapd, sta);
break;
case STA_DISASSOC:
sta->flags &= ~WLAN_STA_ASSOC;
ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);
if (!sta->acct_terminate_cause)
sta->acct_terminate_cause =
RADIUS_ACCT_TERMINATE_CAUSE_IDLE_TIMEOUT;
accounting_sta_stop(hapd, sta);
ieee802_1x_free_station(sta);
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "disassociated due to "
"inactivity");
sta->timeout_next = STA_DEAUTH;
eloop_register_timeout(AP_DEAUTH_DELAY, 0, ap_handle_timer,
hapd, sta);
mlme_disassociate_indication(
hapd, sta, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
break;
case STA_DEAUTH:
case STA_REMOVE:
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "deauthenticated due to "
"inactivity");
if (!sta->acct_terminate_cause)
sta->acct_terminate_cause =
RADIUS_ACCT_TERMINATE_CAUSE_IDLE_TIMEOUT;
mlme_deauthenticate_indication(
hapd, sta,
WLAN_REASON_PREV_AUTH_NOT_VALID);
ap_free_sta(hapd, sta);
break;
}
}
