static int usb_port_runtime_resume(struct device *dev)
{
struct usb_port *port_dev = to_usb_port(dev);
struct usb_device *hdev = to_usb_device(dev->parent->parent);
struct usb_interface *intf = to_usb_interface(dev->parent);
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
int port1 = port_dev->portnum;
int retval;
if (!hub)
return -EINVAL;
usb_autopm_get_interface(intf);
set_bit(port1, hub->busy_bits);
retval = usb_hub_set_port_power(hdev, port1, true);
if (port_dev->child && !retval) {
/*
* Attempt to wait for usb hub port to be reconnected in order
* to make the resume procedure successful. The device may have
* disconnected while the port was powered off, so ignore the
* return status.
*/
retval = hub_port_debounce_be_connected(hub, port1);
if (retval < 0)
dev_dbg(&port_dev->dev, "can't get reconnection after setting port power on, status %d\n",
retval);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
retval = 0;
}
clear_bit(port1, hub->busy_bits);
usb_autopm_put_interface(intf);
return retval;
}
static int usb_port_runtime_resume(struct device *dev)
{
struct usb_port *port_dev = to_usb_port(dev);
struct usb_device *hdev = to_usb_device(dev->parent->parent);
struct usb_interface *intf = to_usb_interface(dev->parent);
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
struct usb_device *udev = port_dev->child;
struct usb_port *peer = port_dev->peer;
int port1 = port_dev->portnum;
int retval;
if (!hub)
return -EINVAL;
if (hub->in_reset) {
set_bit(port1, hub->power_bits);
return 0;
}
/*
* Power on our usb3 peer before this usb2 port to prevent a usb3
* device from degrading to its usb2 connection
*/
if (!port_dev->is_superspeed && peer)
pm_runtime_get_sync(&peer->dev);
usb_autopm_get_interface(intf);
retval = usb_hub_set_port_power(hdev, hub, port1, true);
msleep(hub_power_on_good_delay(hub));
if (udev && !retval) {
/*
* Attempt to wait for usb hub port to be reconnected in order
* to make the resume procedure successful. The device may have
* disconnected while the port was powered off, so ignore the
* return status.
*/
retval = hub_port_debounce_be_connected(hub, port1);
if (retval < 0)
dev_dbg(&port_dev->dev, "can't get reconnection after setting port power on, status %d\n",
retval);
retval = 0;
/* Force the child awake to revalidate after the power loss. */
if (!test_and_set_bit(port1, hub->child_usage_bits)) {
pm_runtime_get_noresume(&port_dev->dev);
pm_request_resume(&udev->dev);
}
}
usb_autopm_put_interface(intf);
return retval;
}
static int usb_port_runtime_resume(struct device *dev)
{
struct usb_port *port_dev = to_usb_port(dev);
struct usb_device *hdev = to_usb_device(dev->parent->parent);
struct usb_interface *intf = to_usb_interface(dev->parent);
struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
int port1 = port_dev->portnum;
int retval;
if (!hub)
return -EINVAL;
usb_autopm_get_interface(intf);
set_bit(port1, hub->busy_bits);
retval = usb_hub_set_port_power(hdev, hub, port1, true);
if (port_dev->child && !retval) {
/*
* Wait for usb hub port to be reconnected in order to make
* the resume procedure successful.
*/
retval = hub_port_debounce_be_connected(hub, port1);
if (retval < 0) {
dev_dbg(&port_dev->dev, "can't get reconnection after setting port power on, status %d\n",
retval);
goto out;
}
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
/* Set return value to 0 if debounce successful */
retval = 0;
}
out:
clear_bit(port1, hub->busy_bits);
usb_autopm_put_interface(intf);
return retval;
}
