void mark_nodevertex_as_node(devfs_handle_t vhdl, cnodeid_t cnodeid) { if (cnodeid == CNODEID_NONE) return; cnodeid_to_vertex(cnodeid) = vhdl; labelcl_info_add_LBL(vhdl, INFO_LBL_CNODEID, INFO_DESC_EXPORT, (arbitrary_info_t)cnodeid); { char cnodeid_buffer[10]; if (hwgraph_all_cnodes == GRAPH_VERTEX_NONE) { (void)hwgraph_path_add( hwgraph_root, EDGE_LBL_NODENUM, &hwgraph_all_cnodes); } sprintf(cnodeid_buffer, "%d", cnodeid); (void)hwgraph_edge_add( hwgraph_all_cnodes, vhdl, cnodeid_buffer); } }
/* ARGSUSED */ static void __init klhwg_add_cpu(vertex_hdl_t node_vertex, cnodeid_t cnode, klcpu_t *cpu) { vertex_hdl_t my_cpu, cpu_dir; char name[120]; cpuid_t cpu_id; nasid_t nasid; nasid = cnodeid_to_nasid(cnode); cpu_id = nasid_slice_to_cpuid(nasid, cpu->cpu_info.physid); snprintf(name, 120, "%s/%d/%c", EDGE_LBL_CPUBUS, 0, 'a' + cpu->cpu_info.physid); (void) hwgraph_path_add(node_vertex, name, &my_cpu); HWGRAPH_DEBUG(__FILE__, __FUNCTION__,__LINE__, my_cpu, NULL, "Created path for active cpu slice.\n"); mark_cpuvertex_as_cpu(my_cpu, cpu_id); device_master_set(my_cpu, node_vertex); /* Add an alias under the node's CPU directory */ if (hwgraph_edge_get(node_vertex, EDGE_LBL_CPU, &cpu_dir) == GRAPH_SUCCESS) { snprintf(name, 120, "%c", 'a' + cpu->cpu_info.physid); (void) hwgraph_edge_add(cpu_dir, my_cpu, name); HWGRAPH_DEBUG(__FILE__, __FUNCTION__,__LINE__, cpu_dir, my_cpu, "Created % from vhdl1 to vhdl2.\n", name); } }
/* ** Set the master for a given vertex. ** Returns 0 on success, non-0 indicates failure */ int device_master_set(devfs_handle_t vhdl, devfs_handle_t master) { graph_error_t rc; rc = hwgraph_edge_add(vhdl, master, EDGE_LBL_MASTER); return(rc != GRAPH_SUCCESS); }
void mark_cpuvertex_as_cpu(devfs_handle_t vhdl, cpuid_t cpuid) { if (cpuid == CPU_NONE) return; (void)labelcl_info_add_LBL(vhdl, INFO_LBL_CPUID, INFO_DESC_EXPORT, (arbitrary_info_t)cpuid); { char cpuid_buffer[10]; if (hwgraph_all_cpuids == GRAPH_VERTEX_NONE) { (void)hwgraph_path_add( hwgraph_root, EDGE_LBL_CPUNUM, &hwgraph_all_cpuids); } sprintf(cpuid_buffer, "%ld", cpuid); (void)hwgraph_edge_add( hwgraph_all_cpuids, vhdl, cpuid_buffer); } }
static void __init klhwg_connect_hubs(vertex_hdl_t hwgraph_root) { nasid_t nasid; cnodeid_t cnode; lboard_t *brd; klhub_t *hub; lboard_t *dest_brd; vertex_hdl_t hub_hndl; vertex_hdl_t dest_hndl; char path_buffer[50]; char dest_path[50]; graph_error_t rc; int port; for (cnode = 0; cnode < numionodes; cnode++) { nasid = cnodeid_to_nasid(cnode); brd = find_lboard_any((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_SNIA); hub = (klhub_t *)find_first_component(brd, KLSTRUCT_HUB); ASSERT(hub); for (port = 1; port <= MAX_NI_PORTS; port++) { if (hub->hub_port[port].port_nasid == INVALID_NASID) { continue; /* Port not active */ } if (nasid_to_cnodeid(hub->hub_port[port].port_nasid) == INVALID_CNODEID) continue; /* Generate a hardware graph path for this board. */ board_to_path(brd, path_buffer); rc = hwgraph_traverse(hwgraph_root, path_buffer, &hub_hndl); if (rc != GRAPH_SUCCESS) printk(KERN_WARNING "Can't find hub: %s", path_buffer); dest_brd = (lboard_t *)NODE_OFFSET_TO_K0( hub->hub_port[port].port_nasid, hub->hub_port[port].port_offset); /* Generate a hardware graph path for this board. */ board_to_path(dest_brd, dest_path); rc = hwgraph_traverse(hwgraph_root, dest_path, &dest_hndl); if (rc != GRAPH_SUCCESS) { if (KL_CONFIG_DUPLICATE_BOARD(dest_brd)) continue; printk("Can't find board: %s", dest_path); return; } else { char buf[1024]; rc = hwgraph_path_add(hub_hndl, EDGE_LBL_INTERCONNECT, &hub_hndl); HWGRAPH_DEBUG(__FILE__, __FUNCTION__, __LINE__, hub_hndl, NULL, "Created link path.\n"); sprintf(buf,"%s/%s",path_buffer,EDGE_LBL_INTERCONNECT); rc = hwgraph_traverse(hwgraph_root, buf, &hub_hndl); sprintf(buf,"%d",port); rc = hwgraph_edge_add(hub_hndl, dest_hndl, buf); HWGRAPH_DEBUG(__FILE__, __FUNCTION__, __LINE__, hub_hndl, dest_hndl, "Created edge %s from vhdl1 to vhdl2.\n", buf); if (rc != GRAPH_SUCCESS) { printk("Can't create edge: %s/%s to vertex 0x%p, error 0x%x\n", path_buffer, dest_path, (void *)dest_hndl, rc); return; } } } } }
/* ARGSUSED */ static void __init klhwg_connect_one_router(vertex_hdl_t hwgraph_root, lboard_t *brd, cnodeid_t cnode, nasid_t nasid) { klrou_t *router; char path_buffer[50]; char dest_path[50]; vertex_hdl_t router_hndl; vertex_hdl_t dest_hndl; int rc; int port; lboard_t *dest_brd; /* Don't add duplicate boards. */ if (brd->brd_flags & DUPLICATE_BOARD) { return; } /* Generate a hardware graph path for this board. */ board_to_path(brd, path_buffer); rc = hwgraph_traverse(hwgraph_root, path_buffer, &router_hndl); if (rc != GRAPH_SUCCESS) return; if (rc != GRAPH_SUCCESS) printk(KERN_WARNING "Can't find router: %s", path_buffer); /* We don't know what to do with multiple router components */ if (brd->brd_numcompts != 1) { printk("klhwg_connect_one_router: %d cmpts on router\n", brd->brd_numcompts); return; } /* Convert component 0 to klrou_t ptr */ router = (klrou_t *)NODE_OFFSET_TO_K0(NASID_GET(brd), brd->brd_compts[0]); for (port = 1; port <= MAX_ROUTER_PORTS; port++) { /* See if the port's active */ if (router->rou_port[port].port_nasid == INVALID_NASID) { GRPRINTF(("klhwg_connect_one_router: port %d inactive.\n", port)); continue; } if (nasid_to_cnodeid(router->rou_port[port].port_nasid) == INVALID_CNODEID) { continue; } dest_brd = (lboard_t *)NODE_OFFSET_TO_K0( router->rou_port[port].port_nasid, router->rou_port[port].port_offset); /* Generate a hardware graph path for this board. */ board_to_path(dest_brd, dest_path); rc = hwgraph_traverse(hwgraph_root, dest_path, &dest_hndl); if (rc != GRAPH_SUCCESS) { if (KL_CONFIG_DUPLICATE_BOARD(dest_brd)) continue; printk("Can't find router: %s", dest_path); return; } sprintf(dest_path, "%d", port); rc = hwgraph_edge_add(router_hndl, dest_hndl, dest_path); if (rc == GRAPH_DUP) { GRPRINTF(("Skipping port %d. nasid %d %s/%s\n", port, router->rou_port[port].port_nasid, path_buffer, dest_path)); continue; } if (rc != GRAPH_SUCCESS) { printk("Can't create edge: %s/%s to vertex 0x%p error 0x%x\n", path_buffer, dest_path, (void *)dest_hndl, rc); return; } HWGRAPH_DEBUG(__FILE__, __FUNCTION__, __LINE__, router_hndl, dest_hndl, "Created edge %s from vhdl1 to vhdl2.\n", dest_path); } }
/* * Initialize all I/O on the specified node. */ static void io_init_node(cnodeid_t cnodeid) { /*REFERENCED*/ vertex_hdl_t hubv, switchv, widgetv; struct xwidget_hwid_s hwid; hubinfo_t hubinfo; int is_xswitch; nodepda_t *npdap; struct semaphore *peer_sema = 0; uint32_t widget_partnum; cpuid_t c = 0; npdap = NODEPDA(cnodeid); /* * Get the "top" vertex for this node's hardware * graph; it will carry the per-hub hub-specific * data, and act as the crosstalk provider master. * It's canonical path is probably something of the * form /hw/module/%M/slot/%d/node */ hubv = cnodeid_to_vertex(cnodeid); DBG("io_init_node: Initialize IO for cnode %d hubv(node) 0x%p npdap 0x%p\n", cnodeid, hubv, npdap); ASSERT(hubv != GRAPH_VERTEX_NONE); /* * Read mfg info on this hub */ /* * If nothing connected to this hub's xtalk port, we're done. */ early_probe_for_widget(hubv, &hwid); if (hwid.part_num == XWIDGET_PART_NUM_NONE) { #ifdef PROBE_TEST if ((cnodeid == 1) || (cnodeid == 2)) { int index; for (index = 0; index < 600; index++) DBG("Interfering with device probing!!!\n"); } #endif /* io_init_done takes cpu cookie as 2nd argument * to do a restorenoderun for the setnoderun done * at the start of this thread */ DBG("**** io_init_node: Node's 0x%p hub widget has XWIDGET_PART_NUM_NONE ****\n", hubv); return; /* NOTREACHED */ } /* * attach our hub_provider information to hubv, * so we can use it as a crosstalk provider "master" * vertex. */ xtalk_provider_register(hubv, &hub_provider); xtalk_provider_startup(hubv); /* * Create a vertex to represent the crosstalk bus * attached to this hub, and a vertex to be used * as the connect point for whatever is out there * on the other side of our crosstalk connection. * * Crosstalk Switch drivers "climb up" from their * connection point to try and take over the switch * point. * * Of course, the edges and verticies may already * exist, in which case our net effect is just to * associate the "xtalk_" driver with the connection * point for the device. */ (void)hwgraph_path_add(hubv, EDGE_LBL_XTALK, &switchv); DBG("io_init_node: Created 'xtalk' entry to '../node/' xtalk vertex 0x%p\n", switchv); ASSERT(switchv != GRAPH_VERTEX_NONE); (void)hwgraph_edge_add(hubv, switchv, EDGE_LBL_IO); DBG("io_init_node: Created symlink 'io' from ../node/io to ../node/xtalk \n"); /* * We need to find the widget id and update the basew_id field * accordingly. In particular, SN00 has direct connected bridge, * and hence widget id is Not 0. */ widget_partnum = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + WIDGET_ID))) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT; if (widget_partnum == BRIDGE_WIDGET_PART_NUM || widget_partnum == XBRIDGE_WIDGET_PART_NUM){ npdap->basew_id = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + BRIDGE_WID_CONTROL))) & WIDGET_WIDGET_ID); DBG("io_init_node: Found XBRIDGE widget_partnum= 0x%x\n", widget_partnum); } else if ((widget_partnum == XBOW_WIDGET_PART_NUM) || (widget_partnum == XXBOW_WIDGET_PART_NUM) || (widget_partnum == PXBOW_WIDGET_PART_NUM) ) { /* * Xbow control register does not have the widget ID field. * So, hard code the widget ID to be zero. */ DBG("io_init_node: Found XBOW widget_partnum= 0x%x\n", widget_partnum); npdap->basew_id = 0; } else { npdap->basew_id = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + BRIDGE_WID_CONTROL))) & WIDGET_WIDGET_ID); panic(" ****io_init_node: Unknown Widget Part Number 0x%x Widget ID 0x%x attached to Hubv 0x%p ****\n", widget_partnum, npdap->basew_id, (void *)hubv); /*NOTREACHED*/ } { char widname[10]; sprintf(widname, "%x", npdap->basew_id); (void)hwgraph_path_add(switchv, widname, &widgetv); DBG("io_init_node: Created '%s' to '..node/xtalk/' vertex 0x%p\n", widname, widgetv); ASSERT(widgetv != GRAPH_VERTEX_NONE); } nodepda->basew_xc = widgetv; is_xswitch = xwidget_hwid_is_xswitch(&hwid); /* * Try to become the master of the widget. If this is an xswitch * with multiple hubs connected, only one will succeed. Mastership * of an xswitch is used only when touching registers on that xswitch. * The slave xwidgets connected to the xswitch can be owned by various * masters. */ if (device_master_set(widgetv, hubv) == 0) { /* Only one hub (thread) per Crosstalk device or switch makes * it to here. */ /* * Initialize whatever xwidget is hanging off our hub. * Whatever it is, it's accessible through widgetnum 0. */ hubinfo_get(hubv, &hubinfo); (void)xwidget_register(&hwid, widgetv, npdap->basew_id, hubv, hubinfo->h_widgetid); if (!is_xswitch) { /* io_init_done takes cpu cookie as 2nd argument * to do a restorenoderun for the setnoderun done * at the start of this thread */ io_init_done(cnodeid,c); /* NOTREACHED */ } /* * Special handling for Crosstalk Switches (e.g. xbow). * We need to do things in roughly the following order: * 1) Initialize xswitch hardware (done above) * 2) Determine which hubs are available to be widget masters * 3) Discover which links are active from the xswitch * 4) Assign xwidgets hanging off the xswitch to hubs * 5) Initialize all xwidgets on the xswitch */ DBG("call volunteer_for_widgets\n"); volunteer_for_widgets(switchv, hubv); /* If there's someone else on this crossbow, recognize him */ if (npdap->xbow_peer != INVALID_NASID) { nodepda_t *peer_npdap = NODEPDA(NASID_TO_COMPACT_NODEID(npdap->xbow_peer)); peer_sema = &peer_npdap->xbow_sema; DBG("call volunteer_for_widgets again\n"); volunteer_for_widgets(switchv, peer_npdap->node_vertex); } assign_widgets_to_volunteers(switchv, hubv); /* Signal that we're done */ if (peer_sema) { up(peer_sema); } } else { /* Wait 'til master is done assigning widgets. */ down(&npdap->xbow_sema); } #ifdef PROBE_TEST if ((cnodeid == 1) || (cnodeid == 2)) { int index; for (index = 0; index < 500; index++) DBG("Interfering with device probing!!!\n"); } #endif /* Now both nodes can safely inititialize widgets */ io_init_xswitch_widgets(switchv, cnodeid); io_link_xswitch_widgets(switchv, cnodeid); /* io_init_done takes cpu cookie as 2nd argument * to do a restorenoderun for the setnoderun done * at the start of this thread */ io_init_done(cnodeid,c); DBG("\nio_init_node: DONE INITIALIZED ALL I/O FOR CNODEID %d\n\n", cnodeid); }
void io_xswitch_widget_init(vertex_hdl_t xswitchv, vertex_hdl_t hubv, xwidgetnum_t widgetnum) { xswitch_info_t xswitch_info; xwidgetnum_t hub_widgetid; vertex_hdl_t widgetv; cnodeid_t cnode; widgetreg_t widget_id; nasid_t nasid, peer_nasid; struct xwidget_hwid_s hwid; hubinfo_t hubinfo; /*REFERENCED*/ int rc; char pathname[128]; lboard_t *board = NULL; char buffer[16]; char bt; moduleid_t io_module; slotid_t get_widget_slotnum(int xbow, int widget); DBG("\nio_xswitch_widget_init: hubv 0x%p, xswitchv 0x%p, widgetnum 0x%x\n", hubv, xswitchv, widgetnum); /* * Verify that xswitchv is indeed an attached xswitch. */ xswitch_info = xswitch_info_get(xswitchv); ASSERT(xswitch_info != NULL); hubinfo_get(hubv, &hubinfo); nasid = hubinfo->h_nasid; cnode = NASID_TO_COMPACT_NODEID(nasid); hub_widgetid = hubinfo->h_widgetid; /* * Check that the widget is an io widget and is enabled * on this nasid or the `peer' nasid. The peer nasid * is the other hub/bedrock connected to the xbow. */ peer_nasid = NODEPDA(cnode)->xbow_peer; if (peer_nasid == INVALID_NASID) /* If I don't have a peer, use myself. */ peer_nasid = nasid; if (!xbow_port_io_enabled(nasid, widgetnum) && !xbow_port_io_enabled(peer_nasid, widgetnum)) { return; } if (xswitch_info_link_ok(xswitch_info, widgetnum)) { char name[4]; lboard_t dummy; /* * If the current hub is not supposed to be the master * for this widgetnum, then skip this widget. */ if (xswitch_info_master_assignment_get(xswitch_info, widgetnum) != hubv) { return; } board = find_lboard_class( (lboard_t *)KL_CONFIG_INFO(nasid), KLCLASS_IOBRICK); if (!board && NODEPDA(cnode)->xbow_peer != INVALID_NASID) { board = find_lboard_class( (lboard_t *)KL_CONFIG_INFO( NODEPDA(cnode)->xbow_peer), KLCLASS_IOBRICK); } if (board) { DBG("io_xswitch_widget_init: Found KLTYPE_IOBRICK Board 0x%p brd_type 0x%x\n", board, board->brd_type); } else { DBG("io_xswitch_widget_init: FIXME did not find IOBOARD\n"); board = &dummy; } /* Copy over the nodes' geoid info */ { lboard_t *brd; brd = find_lboard((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_SNIA); if ( brd != (lboard_t *)0 ) { board->brd_geoid = brd->brd_geoid; } } /* * Make sure we really want to say xbrick, pbrick, * etc. rather than XIO, graphics, etc. */ memset(buffer, 0, 16); format_module_id(buffer, geo_module(board->brd_geoid), MODULE_FORMAT_BRIEF); sprintf(pathname, EDGE_LBL_MODULE "/%s/" EDGE_LBL_SLAB "/%d" "/%s" "/%s/%d", buffer, geo_slab(board->brd_geoid), (board->brd_type == KLTYPE_IBRICK) ? EDGE_LBL_IBRICK : (board->brd_type == KLTYPE_PBRICK) ? EDGE_LBL_PBRICK : (board->brd_type == KLTYPE_PXBRICK) ? EDGE_LBL_PXBRICK : (board->brd_type == KLTYPE_IXBRICK) ? EDGE_LBL_IXBRICK : (board->brd_type == KLTYPE_CGBRICK) ? EDGE_LBL_CGBRICK : (board->brd_type == KLTYPE_OPUSBRICK) ? EDGE_LBL_OPUSBRICK : (board->brd_type == KLTYPE_XBRICK) ? EDGE_LBL_XBRICK : "?brick", EDGE_LBL_XTALK, widgetnum); DBG("io_xswitch_widget_init: path= %s\n", pathname); rc = hwgraph_path_add(hwgraph_root, pathname, &widgetv); ASSERT(rc == GRAPH_SUCCESS); /* This is needed to let the user programs to map the * module,slot numbers to the corresponding widget numbers * on the crossbow. */ device_master_set(hwgraph_connectpt_get(widgetv), hubv); sprintf(name, "%d", widgetnum); DBG("io_xswitch_widget_init: FIXME hwgraph_edge_add %s xswitchv 0x%p, widgetv 0x%p\n", name, xswitchv, widgetv); rc = hwgraph_edge_add(xswitchv, widgetv, name); /* * crosstalk switch code tracks which * widget is attached to each link. */ xswitch_info_vhdl_set(xswitch_info, widgetnum, widgetv); /* * Peek at the widget to get its crosstalk part and * mfgr numbers, then present it to the generic xtalk * bus provider to have its driver attach routine * called (or not). */ widget_id = XWIDGET_ID_READ(nasid, widgetnum); hwid.part_num = XWIDGET_PART_NUM(widget_id); hwid.rev_num = XWIDGET_REV_NUM(widget_id); hwid.mfg_num = XWIDGET_MFG_NUM(widget_id); /* Store some inventory information about * the xwidget in the hardware graph. */ xwidget_inventory_add(widgetv,board,hwid); (void)xwidget_register(&hwid, widgetv, widgetnum, hubv, hub_widgetid); ia64_sn_sysctl_iobrick_module_get(nasid, &io_module); if (io_module >= 0) { char buffer[16]; vertex_hdl_t to, from; char *brick_name; extern char *iobrick_L1bricktype_to_name(int type); memset(buffer, 0, 16); format_module_id(buffer, geo_module(board->brd_geoid), MODULE_FORMAT_BRIEF); if ( isupper(MODULE_GET_BTCHAR(io_module)) ) { bt = tolower(MODULE_GET_BTCHAR(io_module)); } else { bt = MODULE_GET_BTCHAR(io_module); } brick_name = iobrick_L1bricktype_to_name(bt); /* Add a helper vertex so xbow monitoring * can identify the brick type. It's simply * an edge from the widget 0 vertex to the * brick vertex. */ sprintf(pathname, EDGE_LBL_HW "/" EDGE_LBL_MODULE "/%s/" EDGE_LBL_SLAB "/%d/" EDGE_LBL_NODE "/" EDGE_LBL_XTALK "/" "0", buffer, geo_slab(board->brd_geoid)); DBG("io_xswitch_widget_init: FROM path '%s'\n", pathname); from = hwgraph_path_to_vertex(pathname); ASSERT_ALWAYS(from); sprintf(pathname, EDGE_LBL_HW "/" EDGE_LBL_MODULE "/%s/" EDGE_LBL_SLAB "/%d/" "%s", buffer, geo_slab(board->brd_geoid), brick_name); DBG("io_xswitch_widget_init: TO path '%s'\n", pathname); to = hwgraph_path_to_vertex(pathname); ASSERT_ALWAYS(to); rc = hwgraph_edge_add(from, to, EDGE_LBL_INTERCONNECT); if (rc == -EEXIST) goto link_done; if (rc != GRAPH_SUCCESS) { printk("%s: Unable to establish link" " for xbmon.", pathname); } link_done: } #ifdef SN0_USE_BTE bte_bpush_war(cnode, (void *)board); #endif } }
void io_xswitch_widget_init(devfs_handle_t xswitchv, devfs_handle_t hubv, xwidgetnum_t widgetnum, async_attach_t aa) { xswitch_info_t xswitch_info; xwidgetnum_t hub_widgetid; devfs_handle_t widgetv; cnodeid_t cnode; widgetreg_t widget_id; nasid_t nasid, peer_nasid; struct xwidget_hwid_s hwid; hubinfo_t hubinfo; /*REFERENCED*/ int rc; char pathname[128]; char new_name[64]; moduleid_t module; slotid_t slot; lboard_t *board = NULL; char buffer[16]; slotid_t get_widget_slotnum(int xbow, int widget); DBG("\nio_xswitch_widget_init: hubv 0x%p, xswitchv 0x%p, widgetnum 0x%x\n", hubv, xswitchv, widgetnum); /* * Verify that xswitchv is indeed an attached xswitch. */ xswitch_info = xswitch_info_get(xswitchv); ASSERT(xswitch_info != NULL); hubinfo_get(hubv, &hubinfo); nasid = hubinfo->h_nasid; cnode = NASID_TO_COMPACT_NODEID(nasid); hub_widgetid = hubinfo->h_widgetid; /* * Check that the widget is an io widget and is enabled * on this nasid or the `peer' nasid. The peer nasid * is the other hub/bedrock connected to the xbow. */ peer_nasid = NODEPDA(cnode)->xbow_peer; if (peer_nasid == INVALID_NASID) /* If I don't have a peer, use myself. */ peer_nasid = nasid; if (!xbow_port_io_enabled(nasid, widgetnum) && !xbow_port_io_enabled(peer_nasid, widgetnum)) { return; } if (xswitch_info_link_ok(xswitch_info, widgetnum)) { char name[4]; /* * If the current hub is not supposed to be the master * for this widgetnum, then skip this widget. */ if (xswitch_info_master_assignment_get(xswitch_info, widgetnum) != hubv) { return; } module = NODEPDA(cnode)->module_id; #ifdef XBRIDGE_REGS_SIM /* hardwire for now...could do this with something like: * xbow_soft_t soft = hwgraph_fastinfo_get(vhdl); * xbow_t xbow = soft->base; * xbowreg_t xwidget_id = xbow->xb_wid_id; * but I don't feel like figuring out vhdl right now.. * and I know for a fact the answer is 0x2d000049 */ DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: reading xwidget id: hardwired to xbridge (0x2d000049).\n"); DBG("XWIDGET_PART_NUM(0x2d000049)= 0x%x\n", XWIDGET_PART_NUM(0x2d000049)); if (XWIDGET_PART_NUM(0x2d000049)==XXBOW_WIDGET_PART_NUM) #else if (nasid_has_xbridge(nasid)) #endif /* XBRIDGE_REGS_SIM */ { board = find_lboard_module_class( (lboard_t *)KL_CONFIG_INFO(nasid), module, KLTYPE_IOBRICK); DBG("io_xswitch_widget_init: Board 0x%p\n", board); { lboard_t dummy; if (board) { DBG("io_xswitch_widget_init: Found KLTYPE_IOBRICK Board 0x%p brd_type 0x%x\n", board, board->brd_type); } else { DBG("io_xswitch_widget_init: FIXME did not find IOBOARD\n"); board = &dummy; } } /* * Make sure we really want to say xbrick, pbrick, * etc. rather than XIO, graphics, etc. */ #ifdef SUPPORT_PRINTING_M_FORMAT sprintf(pathname, EDGE_LBL_MODULE "/%M/" "%cbrick" "/%s/%d", NODEPDA(cnode)->module_id, #else memset(buffer, 0, 16); format_module_id(buffer, NODEPDA(cnode)->module_id, MODULE_FORMAT_BRIEF); sprintf(pathname, EDGE_LBL_MODULE "/%s/" "%cbrick" "/%s/%d", buffer, #endif (board->brd_type == KLTYPE_IBRICK) ? 'I' : (board->brd_type == KLTYPE_PBRICK) ? 'P' : (board->brd_type == KLTYPE_XBRICK) ? 'X' : '?', EDGE_LBL_XTALK, widgetnum); } DBG("io_xswitch_widget_init: path= %s\n", pathname); rc = hwgraph_path_add(hwgraph_root, pathname, &widgetv); ASSERT(rc == GRAPH_SUCCESS); /* This is needed to let the user programs to map the * module,slot numbers to the corresponding widget numbers * on the crossbow. */ rc = device_master_set(hwgraph_connectpt_get(widgetv), hubv); /* If we are looking at the global master io6 * then add information about the version of * the io6prom as a part of "detailed inventory" * information. */ if (is_master_baseio(nasid, NODEPDA(cnode)->module_id, get_widget_slotnum(0,widgetnum))) { extern void klhwg_baseio_inventory_add(devfs_handle_t, cnodeid_t); module = NODEPDA(cnode)->module_id; #ifdef XBRIDGE_REGS_SIM DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: reading xwidget id: hardwired to xbridge (0x2d000049).\n"); if (XWIDGET_PART_NUM(0x2d000049)==XXBOW_WIDGET_PART_NUM) #else if (nasid_has_xbridge(nasid)) #endif /* XBRIDGE_REGS_SIM */ { board = find_lboard_module( (lboard_t *)KL_CONFIG_INFO(nasid), module); /* * Change iobrick to correct i/o brick */ #ifdef SUPPORT_PRINTING_M_FORMAT sprintf(pathname, EDGE_LBL_MODULE "/%M/" #else sprintf(pathname, EDGE_LBL_MODULE "/%x/" #endif "iobrick" "/%s/%d", NODEPDA(cnode)->module_id, EDGE_LBL_XTALK, widgetnum); } else { slot = get_widget_slotnum(0, widgetnum); board = get_board_name(nasid, module, slot, new_name); /* * Create the vertex for the widget, * using the decimal * widgetnum as the name of the primary edge. */ #ifdef SUPPORT_PRINTING_M_FORMAT sprintf(pathname, EDGE_LBL_MODULE "/%M/" EDGE_LBL_SLOT "/%s", NODEPDA(cnode)->module_id, new_name); #else memset(buffer, 0, 16); format_module_id(buffer, NODEPDA(cnode)->module_id, MODULE_FORMAT_BRIEF); sprintf(pathname, EDGE_LBL_MODULE "/%s/" EDGE_LBL_SLOT "/%s", buffer, new_name); #endif } rc = hwgraph_path_add(hwgraph_root, pathname, &widgetv); DBG("io_xswitch_widget_init: (2) path= %s\n", pathname); /* * This is a weird ass code needed for error injection * purposes. */ rc = device_master_set(hwgraph_connectpt_get(widgetv), hubv); klhwg_baseio_inventory_add(widgetv,cnode); } sprintf(name, "%d", widgetnum); DBG("io_xswitch_widget_init: FIXME hwgraph_edge_add %s xswitchv 0x%p, widgetv 0x%p\n", name, xswitchv, widgetv); rc = hwgraph_edge_add(xswitchv, widgetv, name); /* * crosstalk switch code tracks which * widget is attached to each link. */ xswitch_info_vhdl_set(xswitch_info, widgetnum, widgetv); /* * Peek at the widget to get its crosstalk part and * mfgr numbers, then present it to the generic xtalk * bus provider to have its driver attach routine * called (or not). */ #ifdef XBRIDGE_REGS_SIM widget_id = 0x2d000049; DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: id hardwired to widget_id\n"); #else widget_id = XWIDGET_ID_READ(nasid, widgetnum); #endif /* XBRIDGE_REGS_SIM */ hwid.part_num = XWIDGET_PART_NUM(widget_id); hwid.rev_num = XWIDGET_REV_NUM(widget_id); hwid.mfg_num = XWIDGET_MFG_NUM(widget_id); /* Store some inventory information about * the xwidget in the hardware graph. */ xwidget_inventory_add(widgetv,board,hwid); (void)xwidget_register(&hwid, widgetv, widgetnum, hubv, hub_widgetid, aa); #ifdef SN0_USE_BTE bte_bpush_war(cnode, (void *)board); #endif }