/**
* rvt_query_port: Passes the query port call to the driver
* @ibdev: Verbs IB dev
* @port_num: port number, 1 based from ib core
* @props: structure to hold returned properties
*
* Return: 0 on success
*/
static int rvt_query_port(struct ib_device *ibdev, u8 port_num,
struct ib_port_attr *props)
{
struct rvt_dev_info *rdi = ib_to_rvt(ibdev);
struct rvt_ibport *rvp;
int port_index = ibport_num_to_idx(ibdev, port_num);
if (port_index < 0)
return -EINVAL;
rvp = rdi->ports[port_index];
/* props being zeroed by the caller, avoid zeroing it here */
props->sm_lid = rvp->sm_lid;
props->sm_sl = rvp->sm_sl;
props->port_cap_flags = rvp->port_cap_flags;
props->max_msg_sz = 0x80000000;
props->pkey_tbl_len = rvt_get_npkeys(rdi);
props->bad_pkey_cntr = rvp->pkey_violations;
props->qkey_viol_cntr = rvp->qkey_violations;
props->subnet_timeout = rvp->subnet_timeout;
props->init_type_reply = 0;
/* Populate the remaining ib_port_attr elements */
return rdi->driver_f.query_port_state(rdi, port_num, props);
}
/**
* rvt_destroy_qp - destroy a queue pair
* @ibqp: the queue pair to destroy
*
* Note that this can be called while the QP is actively sending or
* receiving!
*
* Return: 0 on success.
*/
int rvt_destroy_qp(struct ib_qp *ibqp)
{
struct rvt_qp *qp = ibqp_to_rvtqp(ibqp);
struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device);
spin_lock_irq(&qp->r_lock);
spin_lock(&qp->s_hlock);
spin_lock(&qp->s_lock);
rvt_reset_qp(rdi, qp, ibqp->qp_type);
spin_unlock(&qp->s_lock);
spin_unlock(&qp->s_hlock);
spin_unlock_irq(&qp->r_lock);
/* qpn is now available for use again */
rvt_free_qpn(&rdi->qp_dev->qpn_table, qp->ibqp.qp_num);
spin_lock(&rdi->n_qps_lock);
rdi->n_qps_allocated--;
if (qp->ibqp.qp_type == IB_QPT_RC) {
rdi->n_rc_qps--;
rdi->busy_jiffies = rdi->n_rc_qps / RC_QP_SCALING_INTERVAL;
}
spin_unlock(&rdi->n_qps_lock);
if (qp->ip)
kref_put(&qp->ip->ref, rvt_release_mmap_info);
else
vfree(qp->r_rq.wq);
vfree(qp->s_wq);
rdi->driver_f.qp_priv_free(rdi, qp);
kfree(qp);
return 0;
}
/**
* rvt_modify_port
* @ibdev: Verbs IB dev
* @port_num: Port number, 1 based from ib core
* @port_modify_mask: How to change the port
* @props: Structure to fill in
*
* Return: 0 on success
*/
static int rvt_modify_port(struct ib_device *ibdev, u8 port_num,
int port_modify_mask, struct ib_port_modify *props)
{
struct rvt_dev_info *rdi = ib_to_rvt(ibdev);
struct rvt_ibport *rvp;
int ret = 0;
int port_index = ibport_num_to_idx(ibdev, port_num);
if (port_index < 0)
return -EINVAL;
rvp = rdi->ports[port_index];
if (port_modify_mask & IB_PORT_OPA_MASK_CHG) {
rvp->port_cap3_flags |= props->set_port_cap_mask;
rvp->port_cap3_flags &= ~props->clr_port_cap_mask;
} else {
rvp->port_cap_flags |= props->set_port_cap_mask;
rvp->port_cap_flags &= ~props->clr_port_cap_mask;
}
if (props->set_port_cap_mask || props->clr_port_cap_mask)
rdi->driver_f.cap_mask_chg(rdi, port_num);
if (port_modify_mask & IB_PORT_SHUTDOWN)
ret = rdi->driver_f.shut_down_port(rdi, port_num);
if (port_modify_mask & IB_PORT_RESET_QKEY_CNTR)
rvp->qkey_violations = 0;
return ret;
}
/**
* rvt_dealloc_pd - Free PD
* @ibpd: Free up PD
*
* Return: always 0
*/
int rvt_dealloc_pd(struct ib_pd *ibpd)
{
struct rvt_pd *pd = ibpd_to_rvtpd(ibpd);
struct rvt_dev_info *dev = ib_to_rvt(ibpd->device);
spin_lock(&dev->n_pds_lock);
dev->n_pds_allocated--;
spin_unlock(&dev->n_pds_lock);
kfree(pd);
return 0;
}
static int rvt_query_device(struct ib_device *ibdev,
struct ib_device_attr *props,
struct ib_udata *uhw)
{
struct rvt_dev_info *rdi = ib_to_rvt(ibdev);
if (uhw->inlen || uhw->outlen)
return -EINVAL;
/*
* Return rvt_dev_info.dparms.props contents
*/
*props = rdi->dparms.props;
return 0;
}
/**
* rvt_query_qp - query an ipbq
* @ibqp: IB qp to query
* @attr: attr struct to fill in
* @attr_mask: attr mask ignored
* @init_attr: struct to fill in
*
* Return: always 0
*/
int rvt_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask, struct ib_qp_init_attr *init_attr)
{
struct rvt_qp *qp = ibqp_to_rvtqp(ibqp);
struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device);
attr->qp_state = qp->state;
attr->cur_qp_state = attr->qp_state;
attr->path_mtu = qp->path_mtu;
attr->path_mig_state = qp->s_mig_state;
attr->qkey = qp->qkey;
attr->rq_psn = qp->r_psn & rdi->dparms.psn_mask;
attr->sq_psn = qp->s_next_psn & rdi->dparms.psn_mask;
attr->dest_qp_num = qp->remote_qpn;
attr->qp_access_flags = qp->qp_access_flags;
attr->cap.max_send_wr = qp->s_size - 1;
attr->cap.max_recv_wr = qp->ibqp.srq ? 0 : qp->r_rq.size - 1;
attr->cap.max_send_sge = qp->s_max_sge;
attr->cap.max_recv_sge = qp->r_rq.max_sge;
attr->cap.max_inline_data = 0;
attr->ah_attr = qp->remote_ah_attr;
attr->alt_ah_attr = qp->alt_ah_attr;
attr->pkey_index = qp->s_pkey_index;
attr->alt_pkey_index = qp->s_alt_pkey_index;
attr->en_sqd_async_notify = 0;
attr->sq_draining = qp->s_draining;
attr->max_rd_atomic = qp->s_max_rd_atomic;
attr->max_dest_rd_atomic = qp->r_max_rd_atomic;
attr->min_rnr_timer = qp->r_min_rnr_timer;
attr->port_num = qp->port_num;
attr->timeout = qp->timeout;
attr->retry_cnt = qp->s_retry_cnt;
attr->rnr_retry = qp->s_rnr_retry_cnt;
attr->alt_port_num = qp->alt_ah_attr.port_num;
attr->alt_timeout = qp->alt_timeout;
init_attr->event_handler = qp->ibqp.event_handler;
init_attr->qp_context = qp->ibqp.qp_context;
init_attr->send_cq = qp->ibqp.send_cq;
init_attr->recv_cq = qp->ibqp.recv_cq;
init_attr->srq = qp->ibqp.srq;
init_attr->cap = attr->cap;
if (qp->s_flags & RVT_S_SIGNAL_REQ_WR)
init_attr->sq_sig_type = IB_SIGNAL_REQ_WR;
else
init_attr->sq_sig_type = IB_SIGNAL_ALL_WR;
init_attr->qp_type = qp->ibqp.qp_type;
init_attr->port_num = qp->port_num;
return 0;
}
/**
* rvt_destroy_srq - destory an srq
* @ibsrq: srq object to destroy
*
* Return always 0
*/
int rvt_destroy_srq(struct ib_srq *ibsrq)
{
struct rvt_srq *srq = ibsrq_to_rvtsrq(ibsrq);
struct rvt_dev_info *dev = ib_to_rvt(ibsrq->device);
spin_lock(&dev->n_srqs_lock);
dev->n_srqs_allocated--;
spin_unlock(&dev->n_srqs_lock);
if (srq->ip)
kref_put(&srq->ip->ref, rvt_release_mmap_info);
else
vfree(srq->rq.wq);
kfree(srq);
return 0;
}
/**
* rvt_post_send - post a send on a QP
* @ibqp: the QP to post the send on
* @wr: the list of work requests to post
* @bad_wr: the first bad WR is put here
*
* This may be called from interrupt context.
*
* Return: 0 on success else errno
*/
int rvt_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
struct ib_send_wr **bad_wr)
{
struct rvt_qp *qp = ibqp_to_rvtqp(ibqp);
struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device);
unsigned long flags = 0;
int call_send;
unsigned nreq = 0;
int err = 0;
spin_lock_irqsave(&qp->s_hlock, flags);
/*
* Ensure QP state is such that we can send. If not bail out early,
* there is no need to do this every time we post a send.
*/
if (unlikely(!(ib_rvt_state_ops[qp->state] & RVT_POST_SEND_OK))) {
spin_unlock_irqrestore(&qp->s_hlock, flags);
return -EINVAL;
}
/*
* If the send queue is empty, and we only have a single WR then just go
* ahead and kick the send engine into gear. Otherwise we will always
* just schedule the send to happen later.
*/
call_send = qp->s_head == ACCESS_ONCE(qp->s_last) && !wr->next;
for (; wr; wr = wr->next) {
err = rvt_post_one_wr(qp, wr, &call_send);
if (unlikely(err)) {
*bad_wr = wr;
goto bail;
}
nreq++;
}
bail:
spin_unlock_irqrestore(&qp->s_hlock, flags);
if (nreq) {
if (call_send)
rdi->driver_f.schedule_send_no_lock(qp);
else
rdi->driver_f.do_send(qp);
}
return err;
}
/**
* rvt_alloc_pd - allocate a protection domain
* @ibdev: ib device
* @context: optional user context
* @udata: optional user data
*
* Allocate and keep track of a PD.
*
* Return: 0 on success
*/
struct ib_pd *rvt_alloc_pd(struct ib_device *ibdev,
struct ib_ucontext *context,
struct ib_udata *udata)
{
struct rvt_dev_info *dev = ib_to_rvt(ibdev);
struct rvt_pd *pd;
struct ib_pd *ret;
pd = kmalloc(sizeof(*pd), GFP_KERNEL);
if (!pd) {
ret = ERR_PTR(-ENOMEM);
goto bail;
}
/*
* While we could continue allocating protecetion domains, being
* constrained only by system resources. The IBTA spec defines that
* there is a max_pd limit that can be set and we need to check for
* that.
*/
spin_lock(&dev->n_pds_lock);
if (dev->n_pds_allocated == dev->dparms.props.max_pd) {
spin_unlock(&dev->n_pds_lock);
kfree(pd);
ret = ERR_PTR(-ENOMEM);
goto bail;
}
dev->n_pds_allocated++;
spin_unlock(&dev->n_pds_lock);
/* ib_alloc_pd() will initialize pd->ibpd. */
pd->user = udata ? 1 : 0;
ret = &pd->ibpd;
bail:
return ret;
}
/**
* rvt_query_pkey - Return a pkey from the table at a given index
* @ibdev: Verbs IB dev
* @port_num: Port number, 1 based from ib core
* @index: Index into pkey table
* @pkey: returned pkey from the port pkey table
*
* Return: 0 on failure pkey otherwise
*/
static int rvt_query_pkey(struct ib_device *ibdev, u8 port_num, u16 index,
u16 *pkey)
{
/*
* Driver will be responsible for keeping rvt_dev_info.pkey_table up to
* date. This function will just return that value. There is no need to
* lock, if a stale value is read and sent to the user so be it there is
* no way to protect against that anyway.
*/
struct rvt_dev_info *rdi = ib_to_rvt(ibdev);
int port_index;
port_index = ibport_num_to_idx(ibdev, port_num);
if (port_index < 0)
return -EINVAL;
if (index >= rvt_get_npkeys(rdi))
return -EINVAL;
*pkey = rvt_get_pkey(rdi, port_index, index);
return 0;
}
/**
* rvt_query_gid - Return a gid from the table
* @ibdev: Verbs IB dev
* @port_num: Port number, 1 based from ib core
* @guid_index: Index in table
* @gid: Gid to return
*
* Return: 0 on success
*/
static int rvt_query_gid(struct ib_device *ibdev, u8 port_num,
int guid_index, union ib_gid *gid)
{
struct rvt_dev_info *rdi;
struct rvt_ibport *rvp;
int port_index;
/*
* Driver is responsible for updating the guid table. Which will be used
* to craft the return value. This will work similar to how query_pkey()
* is being done.
*/
port_index = ibport_num_to_idx(ibdev, port_num);
if (port_index < 0)
return -EINVAL;
rdi = ib_to_rvt(ibdev);
rvp = rdi->ports[port_index];
gid->global.subnet_prefix = rvp->gid_prefix;
return rdi->driver_f.get_guid_be(rdi, rvp, guid_index,
&gid->global.interface_id);
}
/**
* rvt_modify_srq - modify a shared receive queue
* @ibsrq: the SRQ to modify
* @attr: the new attributes of the SRQ
* @attr_mask: indicates which attributes to modify
* @udata: user data for libibverbs.so
*
* Return: 0 on success
*/
int rvt_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
enum ib_srq_attr_mask attr_mask,
struct ib_udata *udata)
{
struct rvt_srq *srq = ibsrq_to_rvtsrq(ibsrq);
struct rvt_dev_info *dev = ib_to_rvt(ibsrq->device);
struct rvt_rwq *wq;
int ret = 0;
if (attr_mask & IB_SRQ_MAX_WR) {
struct rvt_rwq *owq;
struct rvt_rwqe *p;
u32 sz, size, n, head, tail;
/* Check that the requested sizes are below the limits. */
if ((attr->max_wr > dev->dparms.props.max_srq_wr) ||
((attr_mask & IB_SRQ_LIMIT) ?
attr->srq_limit : srq->limit) > attr->max_wr)
return -EINVAL;
sz = sizeof(struct rvt_rwqe) +
srq->rq.max_sge * sizeof(struct ib_sge);
size = attr->max_wr + 1;
wq = udata ?
vmalloc_user(sizeof(struct rvt_rwq) + size * sz) :
vzalloc_node(sizeof(struct rvt_rwq) + size * sz,
dev->dparms.node);
if (!wq)
return -ENOMEM;
/* Check that we can write the offset to mmap. */
if (udata && udata->inlen >= sizeof(__u64)) {
__u64 offset_addr;
__u64 offset = 0;
ret = ib_copy_from_udata(&offset_addr, udata,
sizeof(offset_addr));
if (ret)
goto bail_free;
udata->outbuf = (void __user *)
(unsigned long)offset_addr;
ret = ib_copy_to_udata(udata, &offset,
sizeof(offset));
if (ret)
goto bail_free;
}
spin_lock_irq(&srq->rq.lock);
/*
* validate head and tail pointer values and compute
* the number of remaining WQEs.
*/
owq = srq->rq.wq;
head = owq->head;
tail = owq->tail;
if (head >= srq->rq.size || tail >= srq->rq.size) {
ret = -EINVAL;
goto bail_unlock;
}
n = head;
if (n < tail)
n += srq->rq.size - tail;
else
n -= tail;
if (size <= n) {
ret = -EINVAL;
goto bail_unlock;
}
n = 0;
p = wq->wq;
while (tail != head) {
struct rvt_rwqe *wqe;
int i;
wqe = rvt_get_rwqe_ptr(&srq->rq, tail);
p->wr_id = wqe->wr_id;
p->num_sge = wqe->num_sge;
for (i = 0; i < wqe->num_sge; i++)
p->sg_list[i] = wqe->sg_list[i];
n++;
p = (struct rvt_rwqe *)((char *)p + sz);
if (++tail >= srq->rq.size)
tail = 0;
}
srq->rq.wq = wq;
srq->rq.size = size;
wq->head = n;
wq->tail = 0;
if (attr_mask & IB_SRQ_LIMIT)
srq->limit = attr->srq_limit;
spin_unlock_irq(&srq->rq.lock);
vfree(owq);
if (srq->ip) {
struct rvt_mmap_info *ip = srq->ip;
struct rvt_dev_info *dev = ib_to_rvt(srq->ibsrq.device);
u32 s = sizeof(struct rvt_rwq) + size * sz;
rvt_update_mmap_info(dev, ip, s, wq);
/*
* Return the offset to mmap.
* See rvt_mmap() for details.
*/
if (udata && udata->inlen >= sizeof(__u64)) {
ret = ib_copy_to_udata(udata, &ip->offset,
sizeof(ip->offset));
if (ret)
return ret;
}
/*
* Put user mapping info onto the pending list
* unless it already is on the list.
*/
spin_lock_irq(&dev->pending_lock);
if (list_empty(&ip->pending_mmaps))
list_add(&ip->pending_mmaps,
&dev->pending_mmaps);
spin_unlock_irq(&dev->pending_lock);
}
} else if (attr_mask & IB_SRQ_LIMIT) {
spin_lock_irq(&srq->rq.lock);
if (attr->srq_limit >= srq->rq.size)
ret = -EINVAL;
else
srq->limit = attr->srq_limit;
spin_unlock_irq(&srq->rq.lock);
}
return ret;
bail_unlock:
spin_unlock_irq(&srq->rq.lock);
bail_free:
vfree(wq);
return ret;
}
/**
* rvt_create_srq - create a shared receive queue
* @ibpd: the protection domain of the SRQ to create
* @srq_init_attr: the attributes of the SRQ
* @udata: data from libibverbs when creating a user SRQ
*
* Return: Allocated srq object
*/
struct ib_srq *rvt_create_srq(struct ib_pd *ibpd,
struct ib_srq_init_attr *srq_init_attr,
struct ib_udata *udata)
{
struct rvt_dev_info *dev = ib_to_rvt(ibpd->device);
struct rvt_ucontext *ucontext = rdma_udata_to_drv_context(
udata, struct rvt_ucontext, ibucontext);
struct rvt_srq *srq;
u32 sz;
struct ib_srq *ret;
if (srq_init_attr->srq_type != IB_SRQT_BASIC)
return ERR_PTR(-EOPNOTSUPP);
if (srq_init_attr->attr.max_sge == 0 ||
srq_init_attr->attr.max_sge > dev->dparms.props.max_srq_sge ||
srq_init_attr->attr.max_wr == 0 ||
srq_init_attr->attr.max_wr > dev->dparms.props.max_srq_wr)
return ERR_PTR(-EINVAL);
srq = kzalloc_node(sizeof(*srq), GFP_KERNEL, dev->dparms.node);
if (!srq)
return ERR_PTR(-ENOMEM);
/*
* Need to use vmalloc() if we want to support large #s of entries.
*/
srq->rq.size = srq_init_attr->attr.max_wr + 1;
srq->rq.max_sge = srq_init_attr->attr.max_sge;
sz = sizeof(struct ib_sge) * srq->rq.max_sge +
sizeof(struct rvt_rwqe);
srq->rq.wq = udata ?
vmalloc_user(sizeof(struct rvt_rwq) + srq->rq.size * sz) :
vzalloc_node(sizeof(struct rvt_rwq) + srq->rq.size * sz,
dev->dparms.node);
if (!srq->rq.wq) {
ret = ERR_PTR(-ENOMEM);
goto bail_srq;
}
/*
* Return the address of the RWQ as the offset to mmap.
* See rvt_mmap() for details.
*/
if (udata && udata->outlen >= sizeof(__u64)) {
int err;
u32 s = sizeof(struct rvt_rwq) + srq->rq.size * sz;
srq->ip =
rvt_create_mmap_info(dev, s, &ucontext->ibucontext,
srq->rq.wq);
if (!srq->ip) {
ret = ERR_PTR(-ENOMEM);
goto bail_wq;
}
err = ib_copy_to_udata(udata, &srq->ip->offset,
sizeof(srq->ip->offset));
if (err) {
ret = ERR_PTR(err);
goto bail_ip;
}
}
/*
* ib_create_srq() will initialize srq->ibsrq.
*/
spin_lock_init(&srq->rq.lock);
srq->limit = srq_init_attr->attr.srq_limit;
spin_lock(&dev->n_srqs_lock);
if (dev->n_srqs_allocated == dev->dparms.props.max_srq) {
spin_unlock(&dev->n_srqs_lock);
ret = ERR_PTR(-ENOMEM);
goto bail_ip;
}
dev->n_srqs_allocated++;
spin_unlock(&dev->n_srqs_lock);
if (srq->ip) {
spin_lock_irq(&dev->pending_lock);
list_add(&srq->ip->pending_mmaps, &dev->pending_mmaps);
spin_unlock_irq(&dev->pending_lock);
}
return &srq->ibsrq;
bail_ip:
kfree(srq->ip);
bail_wq:
vfree(srq->rq.wq);
bail_srq:
kfree(srq);
return ret;
}
/**
* rvt_create_cq - create a completion queue
* @ibdev: the device this completion queue is attached to
* @attr: creation attributes
* @context: unused by the QLogic_IB driver
* @udata: user data for libibverbs.so
*
* Called by ib_create_cq() in the generic verbs code.
*
* Return: pointer to the completion queue or negative errno values
* for failure.
*/
struct ib_cq *rvt_create_cq(struct ib_device *ibdev,
const struct ib_cq_init_attr *attr,
struct ib_ucontext *context,
struct ib_udata *udata)
{
struct rvt_dev_info *rdi = ib_to_rvt(ibdev);
struct rvt_cq *cq;
struct rvt_cq_wc *wc;
struct ib_cq *ret;
u32 sz;
unsigned int entries = attr->cqe;
if (attr->flags)
return ERR_PTR(-EINVAL);
if (entries < 1 || entries > rdi->dparms.props.max_cqe)
return ERR_PTR(-EINVAL);
/* Allocate the completion queue structure. */
cq = kzalloc(sizeof(*cq), GFP_KERNEL);
if (!cq)
return ERR_PTR(-ENOMEM);
/*
* Allocate the completion queue entries and head/tail pointers.
* This is allocated separately so that it can be resized and
* also mapped into user space.
* We need to use vmalloc() in order to support mmap and large
* numbers of entries.
*/
sz = sizeof(*wc);
if (udata && udata->outlen >= sizeof(__u64))
sz += sizeof(struct ib_uverbs_wc) * (entries + 1);
else
sz += sizeof(struct ib_wc) * (entries + 1);
wc = vmalloc_user(sz);
if (!wc) {
ret = ERR_PTR(-ENOMEM);
goto bail_cq;
}
/*
* Return the address of the WC as the offset to mmap.
* See rvt_mmap() for details.
*/
if (udata && udata->outlen >= sizeof(__u64)) {
int err;
cq->ip = rvt_create_mmap_info(rdi, sz, context, wc);
if (!cq->ip) {
ret = ERR_PTR(-ENOMEM);
goto bail_wc;
}
err = ib_copy_to_udata(udata, &cq->ip->offset,
sizeof(cq->ip->offset));
if (err) {
ret = ERR_PTR(err);
goto bail_ip;
}
}
spin_lock(&rdi->n_cqs_lock);
if (rdi->n_cqs_allocated == rdi->dparms.props.max_cq) {
spin_unlock(&rdi->n_cqs_lock);
ret = ERR_PTR(-ENOMEM);
goto bail_ip;
}
rdi->n_cqs_allocated++;
spin_unlock(&rdi->n_cqs_lock);
if (cq->ip) {
spin_lock_irq(&rdi->pending_lock);
list_add(&cq->ip->pending_mmaps, &rdi->pending_mmaps);
spin_unlock_irq(&rdi->pending_lock);
}
/*
* ib_create_cq() will initialize cq->ibcq except for cq->ibcq.cqe.
* The number of entries should be >= the number requested or return
* an error.
*/
cq->rdi = rdi;
cq->ibcq.cqe = entries;
cq->notify = RVT_CQ_NONE;
spin_lock_init(&cq->lock);
init_kthread_work(&cq->comptask, send_complete);
cq->queue = wc;
ret = &cq->ibcq;
goto done;
bail_ip:
kfree(cq->ip);
bail_wc:
vfree(wc);
bail_cq:
kfree(cq);
done:
return ret;
}
/**
* qib_modify_qp - modify the attributes of a queue pair
* @ibqp: the queue pair who's attributes we're modifying
* @attr: the new attributes
* @attr_mask: the mask of attributes to modify
* @udata: user data for libibverbs.so
*
* Return: 0 on success, otherwise returns an errno.
*/
int rvt_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask, struct ib_udata *udata)
{
struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device);
struct rvt_qp *qp = ibqp_to_rvtqp(ibqp);
enum ib_qp_state cur_state, new_state;
struct ib_event ev;
int lastwqe = 0;
int mig = 0;
int pmtu = 0; /* for gcc warning only */
enum rdma_link_layer link;
link = rdma_port_get_link_layer(ibqp->device, qp->port_num);
spin_lock_irq(&qp->r_lock);
spin_lock(&qp->s_hlock);
spin_lock(&qp->s_lock);
cur_state = attr_mask & IB_QP_CUR_STATE ?
attr->cur_qp_state : qp->state;
new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state;
if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type,
attr_mask, link))
goto inval;
if (rdi->driver_f.check_modify_qp &&
rdi->driver_f.check_modify_qp(qp, attr, attr_mask, udata))
goto inval;
if (attr_mask & IB_QP_AV) {
if (attr->ah_attr.dlid >= be16_to_cpu(IB_MULTICAST_LID_BASE))
goto inval;
if (rvt_check_ah(qp->ibqp.device, &attr->ah_attr))
goto inval;
}
if (attr_mask & IB_QP_ALT_PATH) {
if (attr->alt_ah_attr.dlid >=
be16_to_cpu(IB_MULTICAST_LID_BASE))
goto inval;
if (rvt_check_ah(qp->ibqp.device, &attr->alt_ah_attr))
goto inval;
if (attr->alt_pkey_index >= rvt_get_npkeys(rdi))
goto inval;
}
if (attr_mask & IB_QP_PKEY_INDEX)
if (attr->pkey_index >= rvt_get_npkeys(rdi))
goto inval;
if (attr_mask & IB_QP_MIN_RNR_TIMER)
if (attr->min_rnr_timer > 31)
goto inval;
if (attr_mask & IB_QP_PORT)
if (qp->ibqp.qp_type == IB_QPT_SMI ||
qp->ibqp.qp_type == IB_QPT_GSI ||
attr->port_num == 0 ||
attr->port_num > ibqp->device->phys_port_cnt)
goto inval;
if (attr_mask & IB_QP_DEST_QPN)
if (attr->dest_qp_num > RVT_QPN_MASK)
goto inval;
if (attr_mask & IB_QP_RETRY_CNT)
if (attr->retry_cnt > 7)
goto inval;
if (attr_mask & IB_QP_RNR_RETRY)
if (attr->rnr_retry > 7)
goto inval;
/*
* Don't allow invalid path_mtu values. OK to set greater
* than the active mtu (or even the max_cap, if we have tuned
* that to a small mtu. We'll set qp->path_mtu
* to the lesser of requested attribute mtu and active,
* for packetizing messages.
* Note that the QP port has to be set in INIT and MTU in RTR.
*/
if (attr_mask & IB_QP_PATH_MTU) {
pmtu = rdi->driver_f.get_pmtu_from_attr(rdi, qp, attr);
if (pmtu < 0)
goto inval;
}
if (attr_mask & IB_QP_PATH_MIG_STATE) {
if (attr->path_mig_state == IB_MIG_REARM) {
if (qp->s_mig_state == IB_MIG_ARMED)
goto inval;
if (new_state != IB_QPS_RTS)
goto inval;
} else if (attr->path_mig_state == IB_MIG_MIGRATED) {
if (qp->s_mig_state == IB_MIG_REARM)
goto inval;
if (new_state != IB_QPS_RTS && new_state != IB_QPS_SQD)
goto inval;
if (qp->s_mig_state == IB_MIG_ARMED)
mig = 1;
} else {
goto inval;
}
}
if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
if (attr->max_dest_rd_atomic > rdi->dparms.max_rdma_atomic)
goto inval;
switch (new_state) {
case IB_QPS_RESET:
if (qp->state != IB_QPS_RESET)
rvt_reset_qp(rdi, qp, ibqp->qp_type);
break;
case IB_QPS_RTR:
/* Allow event to re-trigger if QP set to RTR more than once */
qp->r_flags &= ~RVT_R_COMM_EST;
qp->state = new_state;
break;
case IB_QPS_SQD:
qp->s_draining = qp->s_last != qp->s_cur;
qp->state = new_state;
break;
case IB_QPS_SQE:
if (qp->ibqp.qp_type == IB_QPT_RC)
goto inval;
qp->state = new_state;
break;
case IB_QPS_ERR:
lastwqe = rvt_error_qp(qp, IB_WC_WR_FLUSH_ERR);
break;
default:
qp->state = new_state;
break;
}
if (attr_mask & IB_QP_PKEY_INDEX)
qp->s_pkey_index = attr->pkey_index;
if (attr_mask & IB_QP_PORT)
qp->port_num = attr->port_num;
if (attr_mask & IB_QP_DEST_QPN)
qp->remote_qpn = attr->dest_qp_num;
if (attr_mask & IB_QP_SQ_PSN) {
qp->s_next_psn = attr->sq_psn & rdi->dparms.psn_modify_mask;
qp->s_psn = qp->s_next_psn;
qp->s_sending_psn = qp->s_next_psn;
qp->s_last_psn = qp->s_next_psn - 1;
qp->s_sending_hpsn = qp->s_last_psn;
}
if (attr_mask & IB_QP_RQ_PSN)
qp->r_psn = attr->rq_psn & rdi->dparms.psn_modify_mask;
if (attr_mask & IB_QP_ACCESS_FLAGS)
qp->qp_access_flags = attr->qp_access_flags;
if (attr_mask & IB_QP_AV) {
qp->remote_ah_attr = attr->ah_attr;
qp->s_srate = attr->ah_attr.static_rate;
qp->srate_mbps = ib_rate_to_mbps(qp->s_srate);
}
if (attr_mask & IB_QP_ALT_PATH) {
qp->alt_ah_attr = attr->alt_ah_attr;
qp->s_alt_pkey_index = attr->alt_pkey_index;
}
if (attr_mask & IB_QP_PATH_MIG_STATE) {
qp->s_mig_state = attr->path_mig_state;
if (mig) {
qp->remote_ah_attr = qp->alt_ah_attr;
qp->port_num = qp->alt_ah_attr.port_num;
qp->s_pkey_index = qp->s_alt_pkey_index;
}
}
if (attr_mask & IB_QP_PATH_MTU) {
qp->pmtu = rdi->driver_f.mtu_from_qp(rdi, qp, pmtu);
qp->path_mtu = rdi->driver_f.mtu_to_path_mtu(qp->pmtu);
qp->log_pmtu = ilog2(qp->pmtu);
}
if (attr_mask & IB_QP_RETRY_CNT) {
qp->s_retry_cnt = attr->retry_cnt;
qp->s_retry = attr->retry_cnt;
}
if (attr_mask & IB_QP_RNR_RETRY) {
qp->s_rnr_retry_cnt = attr->rnr_retry;
qp->s_rnr_retry = attr->rnr_retry;
}
if (attr_mask & IB_QP_MIN_RNR_TIMER)
qp->r_min_rnr_timer = attr->min_rnr_timer;
if (attr_mask & IB_QP_TIMEOUT) {
qp->timeout = attr->timeout;
qp->timeout_jiffies =
usecs_to_jiffies((4096UL * (1UL << qp->timeout)) /
1000UL);
}
if (attr_mask & IB_QP_QKEY)
qp->qkey = attr->qkey;
if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
qp->r_max_rd_atomic = attr->max_dest_rd_atomic;
if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC)
qp->s_max_rd_atomic = attr->max_rd_atomic;
if (rdi->driver_f.modify_qp)
rdi->driver_f.modify_qp(qp, attr, attr_mask, udata);
spin_unlock(&qp->s_lock);
spin_unlock(&qp->s_hlock);
spin_unlock_irq(&qp->r_lock);
if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT)
rvt_insert_qp(rdi, qp);
if (lastwqe) {
ev.device = qp->ibqp.device;
ev.element.qp = &qp->ibqp;
ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
}
if (mig) {
ev.device = qp->ibqp.device;
ev.element.qp = &qp->ibqp;
ev.event = IB_EVENT_PATH_MIG;
qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
}
return 0;
inval:
spin_unlock(&qp->s_lock);
spin_unlock(&qp->s_hlock);
spin_unlock_irq(&qp->r_lock);
return -EINVAL;
}
/**
* rvt_error_qp - put a QP into the error state
* @qp: the QP to put into the error state
* @err: the receive completion error to signal if a RWQE is active
*
* Flushes both send and receive work queues.
*
* Return: true if last WQE event should be generated.
* The QP r_lock and s_lock should be held and interrupts disabled.
* If we are already in error state, just return.
*/
int rvt_error_qp(struct rvt_qp *qp, enum ib_wc_status err)
{
struct ib_wc wc;
int ret = 0;
struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device);
if (qp->state == IB_QPS_ERR || qp->state == IB_QPS_RESET)
goto bail;
qp->state = IB_QPS_ERR;
if (qp->s_flags & (RVT_S_TIMER | RVT_S_WAIT_RNR)) {
qp->s_flags &= ~(RVT_S_TIMER | RVT_S_WAIT_RNR);
del_timer(&qp->s_timer);
}
if (qp->s_flags & RVT_S_ANY_WAIT_SEND)
qp->s_flags &= ~RVT_S_ANY_WAIT_SEND;
rdi->driver_f.notify_error_qp(qp);
/* Schedule the sending tasklet to drain the send work queue. */
if (ACCESS_ONCE(qp->s_last) != qp->s_head)
rdi->driver_f.schedule_send(qp);
rvt_clear_mr_refs(qp, 0);
memset(&wc, 0, sizeof(wc));
wc.qp = &qp->ibqp;
wc.opcode = IB_WC_RECV;
if (test_and_clear_bit(RVT_R_WRID_VALID, &qp->r_aflags)) {
wc.wr_id = qp->r_wr_id;
wc.status = err;
rvt_cq_enter(ibcq_to_rvtcq(qp->ibqp.recv_cq), &wc, 1);
}
wc.status = IB_WC_WR_FLUSH_ERR;
if (qp->r_rq.wq) {
struct rvt_rwq *wq;
u32 head;
u32 tail;
spin_lock(&qp->r_rq.lock);
/* sanity check pointers before trusting them */
wq = qp->r_rq.wq;
head = wq->head;
if (head >= qp->r_rq.size)
head = 0;
tail = wq->tail;
if (tail >= qp->r_rq.size)
tail = 0;
while (tail != head) {
wc.wr_id = rvt_get_rwqe_ptr(&qp->r_rq, tail)->wr_id;
if (++tail >= qp->r_rq.size)
tail = 0;
rvt_cq_enter(ibcq_to_rvtcq(qp->ibqp.recv_cq), &wc, 1);
}
wq->tail = tail;
spin_unlock(&qp->r_rq.lock);
} else if (qp->ibqp.event_handler) {
ret = 1;
}
bail:
return ret;
}
/**
* rvt_create_qp - create a queue pair for a device
* @ibpd: the protection domain who's device we create the queue pair for
* @init_attr: the attributes of the queue pair
* @udata: user data for libibverbs.so
*
* Queue pair creation is mostly an rvt issue. However, drivers have their own
* unique idea of what queue pair numbers mean. For instance there is a reserved
* range for PSM.
*
* Return: the queue pair on success, otherwise returns an errno.
*
* Called by the ib_create_qp() core verbs function.
*/
struct ib_qp *rvt_create_qp(struct ib_pd *ibpd,
struct ib_qp_init_attr *init_attr,
struct ib_udata *udata)
{
struct rvt_qp *qp;
int err;
struct rvt_swqe *swq = NULL;
size_t sz;
size_t sg_list_sz;
struct ib_qp *ret = ERR_PTR(-ENOMEM);
struct rvt_dev_info *rdi = ib_to_rvt(ibpd->device);
void *priv = NULL;
gfp_t gfp;
if (!rdi)
return ERR_PTR(-EINVAL);
if (init_attr->cap.max_send_sge > rdi->dparms.props.max_sge ||
init_attr->cap.max_send_wr > rdi->dparms.props.max_qp_wr ||
init_attr->create_flags & ~(IB_QP_CREATE_USE_GFP_NOIO))
return ERR_PTR(-EINVAL);
/* GFP_NOIO is applicable to RC QP's only */
if (init_attr->create_flags & IB_QP_CREATE_USE_GFP_NOIO &&
init_attr->qp_type != IB_QPT_RC)
return ERR_PTR(-EINVAL);
gfp = init_attr->create_flags & IB_QP_CREATE_USE_GFP_NOIO ?
GFP_NOIO : GFP_KERNEL;
/* Check receive queue parameters if no SRQ is specified. */
if (!init_attr->srq) {
if (init_attr->cap.max_recv_sge > rdi->dparms.props.max_sge ||
init_attr->cap.max_recv_wr > rdi->dparms.props.max_qp_wr)
return ERR_PTR(-EINVAL);
if (init_attr->cap.max_send_sge +
init_attr->cap.max_send_wr +
init_attr->cap.max_recv_sge +
init_attr->cap.max_recv_wr == 0)
return ERR_PTR(-EINVAL);
}
switch (init_attr->qp_type) {
case IB_QPT_SMI:
case IB_QPT_GSI:
if (init_attr->port_num == 0 ||
init_attr->port_num > ibpd->device->phys_port_cnt)
return ERR_PTR(-EINVAL);
case IB_QPT_UC:
case IB_QPT_RC:
case IB_QPT_UD:
sz = sizeof(struct rvt_sge) *
init_attr->cap.max_send_sge +
sizeof(struct rvt_swqe);
if (gfp == GFP_NOIO)
swq = __vmalloc(
(init_attr->cap.max_send_wr + 1) * sz,
gfp, PAGE_KERNEL);
else
swq = vmalloc_node(
(init_attr->cap.max_send_wr + 1) * sz,
rdi->dparms.node);
if (!swq)
return ERR_PTR(-ENOMEM);
sz = sizeof(*qp);
sg_list_sz = 0;
if (init_attr->srq) {
struct rvt_srq *srq = ibsrq_to_rvtsrq(init_attr->srq);
if (srq->rq.max_sge > 1)
sg_list_sz = sizeof(*qp->r_sg_list) *
(srq->rq.max_sge - 1);
} else if (init_attr->cap.max_recv_sge > 1)
sg_list_sz = sizeof(*qp->r_sg_list) *
(init_attr->cap.max_recv_sge - 1);
qp = kzalloc_node(sz + sg_list_sz, gfp, rdi->dparms.node);
if (!qp)
goto bail_swq;
RCU_INIT_POINTER(qp->next, NULL);
/*
* Driver needs to set up it's private QP structure and do any
* initialization that is needed.
*/
priv = rdi->driver_f.qp_priv_alloc(rdi, qp, gfp);
if (!priv)
goto bail_qp;
qp->priv = priv;
qp->timeout_jiffies =
usecs_to_jiffies((4096UL * (1UL << qp->timeout)) /
1000UL);
if (init_attr->srq) {
sz = 0;
} else {
qp->r_rq.size = init_attr->cap.max_recv_wr + 1;
qp->r_rq.max_sge = init_attr->cap.max_recv_sge;
sz = (sizeof(struct ib_sge) * qp->r_rq.max_sge) +
sizeof(struct rvt_rwqe);
if (udata)
qp->r_rq.wq = vmalloc_user(
sizeof(struct rvt_rwq) +
qp->r_rq.size * sz);
else if (gfp == GFP_NOIO)
qp->r_rq.wq = __vmalloc(
sizeof(struct rvt_rwq) +
qp->r_rq.size * sz,
gfp, PAGE_KERNEL);
else
qp->r_rq.wq = vmalloc_node(
sizeof(struct rvt_rwq) +
qp->r_rq.size * sz,
rdi->dparms.node);
if (!qp->r_rq.wq)
goto bail_driver_priv;
}
/*
* ib_create_qp() will initialize qp->ibqp
* except for qp->ibqp.qp_num.
*/
spin_lock_init(&qp->r_lock);
spin_lock_init(&qp->s_hlock);
spin_lock_init(&qp->s_lock);
spin_lock_init(&qp->r_rq.lock);
atomic_set(&qp->refcount, 0);
init_waitqueue_head(&qp->wait);
init_timer(&qp->s_timer);
qp->s_timer.data = (unsigned long)qp;
INIT_LIST_HEAD(&qp->rspwait);
qp->state = IB_QPS_RESET;
qp->s_wq = swq;
qp->s_size = init_attr->cap.max_send_wr + 1;
qp->s_avail = init_attr->cap.max_send_wr;
qp->s_max_sge = init_attr->cap.max_send_sge;
if (init_attr->sq_sig_type == IB_SIGNAL_REQ_WR)
qp->s_flags = RVT_S_SIGNAL_REQ_WR;
err = alloc_qpn(rdi, &rdi->qp_dev->qpn_table,
init_attr->qp_type,
init_attr->port_num, gfp);
if (err < 0) {
ret = ERR_PTR(err);
goto bail_rq_wq;
}
qp->ibqp.qp_num = err;
qp->port_num = init_attr->port_num;
rvt_reset_qp(rdi, qp, init_attr->qp_type);
break;
default:
/* Don't support raw QPs */
return ERR_PTR(-EINVAL);
}
init_attr->cap.max_inline_data = 0;
/*
* Return the address of the RWQ as the offset to mmap.
* See rvt_mmap() for details.
*/
if (udata && udata->outlen >= sizeof(__u64)) {
if (!qp->r_rq.wq) {
__u64 offset = 0;
err = ib_copy_to_udata(udata, &offset,
sizeof(offset));
if (err) {
ret = ERR_PTR(err);
goto bail_qpn;
}
} else {
u32 s = sizeof(struct rvt_rwq) + qp->r_rq.size * sz;
qp->ip = rvt_create_mmap_info(rdi, s,
ibpd->uobject->context,
qp->r_rq.wq);
if (!qp->ip) {
ret = ERR_PTR(-ENOMEM);
goto bail_qpn;
}
err = ib_copy_to_udata(udata, &qp->ip->offset,
sizeof(qp->ip->offset));
if (err) {
ret = ERR_PTR(err);
goto bail_ip;
}
}
qp->pid = current->pid;
}
spin_lock(&rdi->n_qps_lock);
if (rdi->n_qps_allocated == rdi->dparms.props.max_qp) {
spin_unlock(&rdi->n_qps_lock);
ret = ERR_PTR(-ENOMEM);
goto bail_ip;
}
rdi->n_qps_allocated++;
/*
* Maintain a busy_jiffies variable that will be added to the timeout
* period in mod_retry_timer and add_retry_timer. This busy jiffies
* is scaled by the number of rc qps created for the device to reduce
* the number of timeouts occurring when there is a large number of
* qps. busy_jiffies is incremented every rc qp scaling interval.
* The scaling interval is selected based on extensive performance
* evaluation of targeted workloads.
*/
if (init_attr->qp_type == IB_QPT_RC) {
rdi->n_rc_qps++;
rdi->busy_jiffies = rdi->n_rc_qps / RC_QP_SCALING_INTERVAL;
}
spin_unlock(&rdi->n_qps_lock);
if (qp->ip) {
spin_lock_irq(&rdi->pending_lock);
list_add(&qp->ip->pending_mmaps, &rdi->pending_mmaps);
spin_unlock_irq(&rdi->pending_lock);
}
ret = &qp->ibqp;
/*
* We have our QP and its good, now keep track of what types of opcodes
* can be processed on this QP. We do this by keeping track of what the
* 3 high order bits of the opcode are.
*/
switch (init_attr->qp_type) {
case IB_QPT_SMI:
case IB_QPT_GSI:
case IB_QPT_UD:
qp->allowed_ops = IB_OPCODE_UD_SEND_ONLY & RVT_OPCODE_QP_MASK;
break;
case IB_QPT_RC:
qp->allowed_ops = IB_OPCODE_RC_SEND_ONLY & RVT_OPCODE_QP_MASK;
break;
case IB_QPT_UC:
qp->allowed_ops = IB_OPCODE_UC_SEND_ONLY & RVT_OPCODE_QP_MASK;
break;
default:
ret = ERR_PTR(-EINVAL);
goto bail_ip;
}
return ret;
bail_ip:
kref_put(&qp->ip->ref, rvt_release_mmap_info);
bail_qpn:
free_qpn(&rdi->qp_dev->qpn_table, qp->ibqp.qp_num);
bail_rq_wq:
vfree(qp->r_rq.wq);
bail_driver_priv:
rdi->driver_f.qp_priv_free(rdi, qp);
bail_qp:
kfree(qp);
bail_swq:
vfree(swq);
return ret;
}
/**
* rvt_post_one_wr - post one RC, UC, or UD send work request
* @qp: the QP to post on
* @wr: the work request to send
*/
static int rvt_post_one_wr(struct rvt_qp *qp,
struct ib_send_wr *wr,
int *call_send)
{
struct rvt_swqe *wqe;
u32 next;
int i;
int j;
int acc;
struct rvt_lkey_table *rkt;
struct rvt_pd *pd;
struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device);
u8 log_pmtu;
int ret;
/* IB spec says that num_sge == 0 is OK. */
if (unlikely(wr->num_sge > qp->s_max_sge))
return -EINVAL;
/*
* Don't allow RDMA reads or atomic operations on UC or
* undefined operations.
* Make sure buffer is large enough to hold the result for atomics.
*/
if (qp->ibqp.qp_type == IB_QPT_UC) {
if ((unsigned)wr->opcode >= IB_WR_RDMA_READ)
return -EINVAL;
} else if (qp->ibqp.qp_type != IB_QPT_RC) {
/* Check IB_QPT_SMI, IB_QPT_GSI, IB_QPT_UD opcode */
if (wr->opcode != IB_WR_SEND &&
wr->opcode != IB_WR_SEND_WITH_IMM)
return -EINVAL;
/* Check UD destination address PD */
if (qp->ibqp.pd != ud_wr(wr)->ah->pd)
return -EINVAL;
} else if ((unsigned)wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD) {
return -EINVAL;
} else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP &&
(wr->num_sge == 0 ||
wr->sg_list[0].length < sizeof(u64) ||
wr->sg_list[0].addr & (sizeof(u64) - 1))) {
return -EINVAL;
} else if (wr->opcode >= IB_WR_RDMA_READ && !qp->s_max_rd_atomic) {
return -EINVAL;
}
/* check for avail */
if (unlikely(!qp->s_avail)) {
qp->s_avail = qp_get_savail(qp);
if (WARN_ON(qp->s_avail > (qp->s_size - 1)))
rvt_pr_err(rdi,
"More avail entries than QP RB size.\nQP: %u, size: %u, avail: %u\nhead: %u, tail: %u, cur: %u, acked: %u, last: %u",
qp->ibqp.qp_num, qp->s_size, qp->s_avail,
qp->s_head, qp->s_tail, qp->s_cur,
qp->s_acked, qp->s_last);
if (!qp->s_avail)
return -ENOMEM;
}
next = qp->s_head + 1;
if (next >= qp->s_size)
next = 0;
rkt = &rdi->lkey_table;
pd = ibpd_to_rvtpd(qp->ibqp.pd);
wqe = rvt_get_swqe_ptr(qp, qp->s_head);
if (qp->ibqp.qp_type != IB_QPT_UC &&
qp->ibqp.qp_type != IB_QPT_RC)
memcpy(&wqe->ud_wr, ud_wr(wr), sizeof(wqe->ud_wr));
else if (wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM ||
wr->opcode == IB_WR_RDMA_WRITE ||
wr->opcode == IB_WR_RDMA_READ)
memcpy(&wqe->rdma_wr, rdma_wr(wr), sizeof(wqe->rdma_wr));
else if (wr->opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
wr->opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
memcpy(&wqe->atomic_wr, atomic_wr(wr), sizeof(wqe->atomic_wr));
else
memcpy(&wqe->wr, wr, sizeof(wqe->wr));
wqe->length = 0;
j = 0;
if (wr->num_sge) {
acc = wr->opcode >= IB_WR_RDMA_READ ?
IB_ACCESS_LOCAL_WRITE : 0;
for (i = 0; i < wr->num_sge; i++) {
u32 length = wr->sg_list[i].length;
int ok;
if (length == 0)
continue;
ok = rvt_lkey_ok(rkt, pd, &wqe->sg_list[j],
&wr->sg_list[i], acc);
if (!ok) {
ret = -EINVAL;
goto bail_inval_free;
}
wqe->length += length;
j++;
}
wqe->wr.num_sge = j;
}
/* general part of wqe valid - allow for driver checks */
if (rdi->driver_f.check_send_wqe) {
ret = rdi->driver_f.check_send_wqe(qp, wqe);
if (ret < 0)
goto bail_inval_free;
if (ret)
*call_send = ret;
}
log_pmtu = qp->log_pmtu;
if (qp->ibqp.qp_type != IB_QPT_UC &&
qp->ibqp.qp_type != IB_QPT_RC) {
struct rvt_ah *ah = ibah_to_rvtah(wqe->ud_wr.ah);
log_pmtu = ah->log_pmtu;
atomic_inc(&ibah_to_rvtah(ud_wr(wr)->ah)->refcount);
}
wqe->ssn = qp->s_ssn++;
wqe->psn = qp->s_next_psn;
wqe->lpsn = wqe->psn +
(wqe->length ? ((wqe->length - 1) >> log_pmtu) : 0);
qp->s_next_psn = wqe->lpsn + 1;
trace_rvt_post_one_wr(qp, wqe);
smp_wmb(); /* see request builders */
qp->s_avail--;
qp->s_head = next;
return 0;
bail_inval_free:
/* release mr holds */
while (j) {
struct rvt_sge *sge = &wqe->sg_list[--j];
rvt_put_mr(sge->mr);
}
return ret;
}
