static void __init mx27ads_board_init(void)
{
mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
"mx27ads");
imx27_add_imx_uart0(&uart_pdata);
imx27_add_imx_uart1(&uart_pdata);
imx27_add_imx_uart2(&uart_pdata);
imx27_add_imx_uart3(&uart_pdata);
imx27_add_imx_uart4(&uart_pdata);
imx27_add_imx_uart5(&uart_pdata);
imx27_add_mxc_nand(&mx27ads_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
imx27_add_imx_fb(&mx27ads_fb_data);
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_mxc_mmc(1, &sdhc2_pdata);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx27_add_mxc_w1(NULL);
}
static void __init mx27pdk_init(void)
{
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
mx27_3ds_sdhc1_enable_level_translator();
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
imx27_add_imx_keypad(&mx27_3ds_keymap_data);
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_imx2_wdt(NULL);
otg_phy_init();
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx27_add_mxc_ehci_otg(&otg_pdata);
}
if (!otg_mode_host)
imx27_add_fsl_usb2_udc(&otg_device_pdata);
imx27_add_spi_imx1(&spi2_pdata);
imx27_add_spi_imx0(&spi1_pdata);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
imx27_add_imx_fb(&mx27_3ds_fb_data);
}
static void __init pca100_init(void)
{
int ret;
imx27_soc_init();
ret = mxc_gpio_setup_multiple_pins(pca100_pins,
ARRAY_SIZE(pca100_pins), "PCA100");
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
imx27_add_imx_ssi(0, &pca100_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
imx27_add_mxc_mmc(1, &sdhc_pdata);
imx27_add_mxc_nand(&pca100_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pca100_i2c_devices,
ARRAY_SIZE(pca100_i2c_devices));
imx27_add_imx_i2c(1, &pca100_i2c1_data);
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
spi_register_board_info(pca100_spi_board_info,
ARRAY_SIZE(pca100_spi_board_info));
imx27_add_spi_imx0(&pca100_spi0_data);
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx27_add_mxc_ehci_otg(&otg_pdata);
} else {
gpio_set_value(OTG_PHY_CS_GPIO, 0);
imx27_add_fsl_usb2_udc(&otg_device_pdata);
}
usbh2_pdata.otg = imx_otg_ulpi_create(
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
imx27_add_imx2_wdt();
imx27_add_mxc_w1();
}
/*
* system init for baseboard usage. Will be called by pcm038 init.
*
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init pcm970_baseboard_init(void)
{
mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
"PCM970");
imx27_add_imx_fb(&pcm038_fb_data);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
imx27_add_mxc_mmc(1, &sdhc_pdata);
pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19));
pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19));
platform_device_register(&pcm970_sja1000);
}
static void __init mx27pdk_init(void)
{
int ret;
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
mx27_3ds_sdhc1_enable_level_translator();
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
imx27_add_imx_keypad(&mx27_3ds_keymap_data);
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_imx2_wdt();
otg_phy_init();
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx27_add_mxc_ehci_otg(&otg_pdata);
}
if (!otg_mode_host)
imx27_add_fsl_usb2_udc(&otg_device_pdata);
imx27_add_spi_imx1(&spi2_pdata);
imx27_add_spi_imx0(&spi1_pdata);
mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx27_add_imx_fb(&mx27_3ds_fb_data);
ret = gpio_request_array(mx27_3ds_camera_gpios,
ARRAY_SIZE(mx27_3ds_camera_gpios));
if (ret) {
pr_err("Failed to request camera gpios");
iclink_ov2640.power = NULL;
}
imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
}
void __init eukrea_mbimx27_baseboard_init(void)
{
mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
imx27_add_imx_uart1(&uart_pdata);
imx27_add_imx_uart2(&uart_pdata);
#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
imx27_add_imx_uart3(&uart_pdata);
#endif
imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
imx27_add_mxc_mmc(0, &sdhc_pdata);
i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
/* */
mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
ads7846_dev_init();
#endif
/* */
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
spi_register_board_info(eukrea_mbimx27_spi_board_info,
ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
/* */
mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
/* */
mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
gpio_request(GPIO_PORTE | 5, "backlight");
platform_device_register(&eukrea_mbimx27_bl_dev);
/* */
mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
gpio_request(GPIO_PORTA | 25, "lcd_enable");
platform_device_register(&eukrea_mbimx27_lcd_powerdev);
imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
}
static void __init mxt_td60_board_init(void)
{
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
"MXT_TD60");
imx27_add_imx_uart0(&uart_pdata);
imx27_add_imx_uart1(&uart_pdata);
imx27_add_imx_uart2(&uart_pdata);
imx27_add_mxc_nand(&mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
ARRAY_SIZE(mxt_td60_i2c_devices));
i2c_register_board_info(1, mxt_td60_i2c2_devices,
ARRAY_SIZE(mxt_td60_i2c2_devices));
imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
imx27_add_imx_fb(&mxt_td60_fb_data);
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_fec(NULL);
}
static void __init pca100_init(void)
{
int ret;
imx27_soc_init();
/* SSI unit */
mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
MXC_AUDMUX_V1_PCR_TFCSEL(3) |
MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
MXC_AUDMUX_V1_PCR_RXDSEL(3));
mxc_audmux_v1_configure_port(3,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
MXC_AUDMUX_V1_PCR_TFCSEL(0) |
MXC_AUDMUX_V1_PCR_TFSDIR |
MXC_AUDMUX_V1_PCR_RXDSEL(0));
ret = mxc_gpio_setup_multiple_pins(pca100_pins,
ARRAY_SIZE(pca100_pins), "PCA100");
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
imx27_add_imx_ssi(0, &pca100_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
imx27_add_mxc_mmc(1, &sdhc_pdata);
imx27_add_mxc_nand(&pca100_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pca100_i2c_devices,
ARRAY_SIZE(pca100_i2c_devices));
imx27_add_imx_i2c(1, &pca100_i2c1_data);
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
spi_register_board_info(pca100_spi_board_info,
ARRAY_SIZE(pca100_spi_board_info));
imx27_add_spi_imx0(&pca100_spi0_data);
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx27_add_mxc_ehci_otg(&otg_pdata);
} else {
gpio_set_value(OTG_PHY_CS_GPIO, 0);
imx27_add_fsl_usb2_udc(&otg_device_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
imx27_add_imx2_wdt(NULL);
imx27_add_mxc_w1(NULL);
}
/*
* system init for baseboard usage. Will be called by cpuimx27 init.
*
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimx27_baseboard_init(void)
{
mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
/* SSI unit master I2S codec connected to SSI_PINS_4*/
mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
MXC_AUDMUX_V1_PCR_SYN |
MXC_AUDMUX_V1_PCR_TFSDIR |
MXC_AUDMUX_V1_PCR_TCLKDIR |
MXC_AUDMUX_V1_PCR_RFSDIR |
MXC_AUDMUX_V1_PCR_RCLKDIR |
MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
);
mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
MXC_AUDMUX_V1_PCR_SYN |
MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
);
#endif
imx27_add_imx_uart1(&uart_pdata);
imx27_add_imx_uart2(&uart_pdata);
#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
imx27_add_imx_uart3(&uart_pdata);
#endif
imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
imx27_add_mxc_mmc(0, &sdhc_pdata);
i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
/* ADS7846 Touchscreen controller init */
mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
ads7846_dev_init();
#endif
/* SPI_CS0 init */
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
spi_register_board_info(eukrea_mbimx27_spi_board_info,
ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
/* Leds configuration */
mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
/* Backlight */
mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
gpio_request(GPIO_PORTE | 5, "backlight");
platform_device_register(&eukrea_mbimx27_bl_dev);
/* LCD Reset */
mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
gpio_request(GPIO_PORTA | 25, "lcd_enable");
platform_device_register(&eukrea_mbimx27_lcd_powerdev);
imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
}
