/**
* Use blitting to clear the renderbuffers named by 'flags'.
* Note: we can't use the ctx->DrawBuffer->_ColorDrawBufferMask field
* since that might include software renderbuffers or renderbuffers
* which we're clearing with triangles.
* \param mask bitmask of BUFFER_BIT_* values indicating buffers to clear
*/
void intelClearWithBlit(GLcontext *ctx, GLbitfield mask, GLboolean all,
GLint cx, GLint cy, GLint cw, GLint ch)
{
struct intel_context *intel = intel_context( ctx );
GLuint clear_depth;
GLbitfield skipBuffers = 0;
BATCH_LOCALS;
if (INTEL_DEBUG & DEBUG_DRI)
_mesa_printf("%s %x\n", __FUNCTION__, mask);
/*
* Compute values for clearing the buffers.
*/
clear_depth = 0;
if (mask & BUFFER_BIT_DEPTH) {
clear_depth = (GLuint) (ctx->DrawBuffer->_DepthMax * ctx->Depth.Clear);
}
if (mask & BUFFER_BIT_STENCIL) {
clear_depth |= (ctx->Stencil.Clear & 0xff) << 24;
}
/* If clearing both depth and stencil, skip BUFFER_BIT_STENCIL in
* the loop below.
*/
if ((mask & BUFFER_BIT_DEPTH) && (mask & BUFFER_BIT_STENCIL)) {
skipBuffers = BUFFER_BIT_STENCIL;
}
/* XXX Move this flush/lock into the following conditional? */
intelFlush( &intel->ctx );
LOCK_HARDWARE( intel );
if (intel->numClipRects)
{
drm_clip_rect_t clear;
int i;
if (intel->ctx.DrawBuffer->Name == 0) {
/* clearing a window */
/* flip top to bottom */
clear.x1 = cx + intel->drawX;
clear.y1 = intel->driDrawable->y + intel->driDrawable->h - cy - ch;
clear.x2 = clear.x1 + cw;
clear.y2 = clear.y1 + ch;
/* adjust for page flipping */
if ( intel->sarea->pf_current_page == 1 ) {
const GLuint tmp = mask;
mask &= ~(BUFFER_BIT_FRONT_LEFT | BUFFER_BIT_BACK_LEFT);
if ( tmp & BUFFER_BIT_FRONT_LEFT ) mask |= BUFFER_BIT_BACK_LEFT;
if ( tmp & BUFFER_BIT_BACK_LEFT ) mask |= BUFFER_BIT_FRONT_LEFT;
}
}
else {
/* clearing FBO */
ASSERT(intel->numClipRects == 1);
ASSERT(intel->pClipRects == &intel->fboRect);
clear.x1 = cx;
clear.y1 = intel->ctx.DrawBuffer->Height - cy - ch;
clear.x2 = clear.y1 + cw;
clear.y2 = clear.y1 + ch;
/* no change to mask */
}
for (i = 0 ; i < intel->numClipRects ; i++)
{
const drm_clip_rect_t *box = &intel->pClipRects[i];
drm_clip_rect_t b;
GLuint buf;
GLuint clearMask = mask; /* use copy, since we modify it below */
if (!all) {
intel_intersect_cliprects(&b, &clear, box);
} else {
b = *box;
}
if (0)
_mesa_printf("clear %d,%d..%d,%d, mask %x\n",
b.x1, b.y1,
b.x2, b.y2,
mask);
/* Loop over all renderbuffers */
for (buf = 0; buf < BUFFER_COUNT && clearMask; buf++) {
const GLbitfield bufBit = 1 << buf;
if ((clearMask & bufBit) && !(bufBit & skipBuffers)) {
/* OK, clear this renderbuffer */
const struct intel_renderbuffer *irb
= intel_renderbuffer(ctx->DrawBuffer->
Attachment[buf].Renderbuffer);
GLuint clearVal;
GLint pitch, cpp;
GLuint BR13, CMD;
ASSERT(irb);
ASSERT(irb->region);
pitch = irb->region->pitch;
cpp = irb->region->cpp;
/* Setup the blit command */
if (cpp == 4) {
BR13 = (0xF0 << 16) | (pitch * cpp) | (1<<24) | (1<<25);
if (buf == BUFFER_DEPTH || buf == BUFFER_STENCIL) {
CMD = XY_COLOR_BLT_CMD;
if (clearMask & BUFFER_BIT_DEPTH)
CMD |= XY_COLOR_BLT_WRITE_RGB;
if (clearMask & BUFFER_BIT_STENCIL)
CMD |= XY_COLOR_BLT_WRITE_ALPHA;
}
else {
/* clearing RGBA */
CMD = (XY_COLOR_BLT_CMD |
XY_COLOR_BLT_WRITE_ALPHA |
XY_COLOR_BLT_WRITE_RGB);
}
}
else {
ASSERT(cpp == 2 || cpp == 0);
BR13 = (0xF0 << 16) | (pitch * cpp) | (1<<24);
CMD = XY_COLOR_BLT_CMD;
}
if (buf == BUFFER_DEPTH || buf == BUFFER_STENCIL) {
clearVal = clear_depth;
}
else {
clearVal = (cpp == 4)
? intel->ClearColor8888 : intel->ClearColor565;
}
/*
_mesa_debug(ctx, "hardware blit clear buf %d rb id %d\n",
buf, irb->Base.Name);
*/
BEGIN_BATCH(6, INTEL_BATCH_NO_CLIPRECTS);
OUT_BATCH( CMD );
OUT_BATCH( BR13 );
OUT_BATCH( (b.y1 << 16) | b.x1 );
OUT_BATCH( (b.y2 << 16) | b.x2 );
OUT_RELOC( irb->region->buffer, DRM_MM_TT|DRM_MM_WRITE,
irb->region->draw_offset );
OUT_BATCH( clearVal );
ADVANCE_BATCH();
clearMask &= ~bufBit; /* turn off bit, for faster loop exit */
}
}
}
intel_batchbuffer_flush( intel->batch );
}
UNLOCK_HARDWARE( intel );
}
/*
* Render a bitmap.
*/
static GLboolean
do_blit_bitmap( GLcontext *ctx,
GLint dstx, GLint dsty,
GLsizei width, GLsizei height,
const struct gl_pixelstore_attrib *unpack,
const GLubyte *bitmap )
{
struct intel_context *intel = intel_context(ctx);
struct intel_region *dst = intel_drawbuf_region(intel);
GLfloat tmpColor[4];
GLubyte ubcolor[4];
GLuint color8888, color565;
if (!dst)
return GL_FALSE;
if (unpack->BufferObj->Name) {
bitmap = map_pbo(ctx, width, height, unpack, bitmap);
if (bitmap == NULL)
return GL_TRUE; /* even though this is an error, we're done */
}
COPY_4V(tmpColor, ctx->Current.RasterColor);
if (NEED_SECONDARY_COLOR(ctx)) {
ADD_3V(tmpColor, tmpColor, ctx->Current.RasterSecondaryColor);
}
UNCLAMPED_FLOAT_TO_UBYTE(ubcolor[0], tmpColor[0]);
UNCLAMPED_FLOAT_TO_UBYTE(ubcolor[1], tmpColor[1]);
UNCLAMPED_FLOAT_TO_UBYTE(ubcolor[2], tmpColor[2]);
UNCLAMPED_FLOAT_TO_UBYTE(ubcolor[3], tmpColor[3]);
color8888 = INTEL_PACKCOLOR8888(ubcolor[0], ubcolor[1], ubcolor[2], ubcolor[3]);
color565 = INTEL_PACKCOLOR565(ubcolor[0], ubcolor[1], ubcolor[2]);
/* Does zoom apply to bitmaps?
*/
if (!intel_check_blit_fragment_ops(ctx) ||
ctx->Pixel.ZoomX != 1.0F ||
ctx->Pixel.ZoomY != 1.0F)
return GL_FALSE;
LOCK_HARDWARE(intel);
if (intel->driDrawable->numClipRects) {
__DRIdrawablePrivate *dPriv = intel->driDrawable;
drm_clip_rect_t *box = dPriv->pClipRects;
drm_clip_rect_t dest_rect;
GLint nbox = dPriv->numClipRects;
GLint srcx = 0, srcy = 0;
GLint orig_screen_x1, orig_screen_y2;
GLuint i;
orig_screen_x1 = dPriv->x + dstx;
orig_screen_y2 = dPriv->y + (dPriv->h - dsty);
/* Do scissoring in GL coordinates:
*/
if (ctx->Scissor.Enabled)
{
GLint x = ctx->Scissor.X;
GLint y = ctx->Scissor.Y;
GLuint w = ctx->Scissor.Width;
GLuint h = ctx->Scissor.Height;
if (!_mesa_clip_to_region(x, y, x+w-1, y+h-1, &dstx, &dsty, &width, &height))
goto out;
}
/* Convert from GL to hardware coordinates:
*/
dsty = dPriv->y + (dPriv->h - dsty - height);
dstx = dPriv->x + dstx;
dest_rect.x1 = dstx < 0 ? 0 : dstx;
dest_rect.y1 = dsty < 0 ? 0 : dsty;
dest_rect.x2 = dstx + width < 0 ? 0 : dstx + width;
dest_rect.y2 = dsty + height < 0 ? 0 : dsty + height;
for (i = 0; i < nbox; i++) {
drm_clip_rect_t rect;
int box_w, box_h;
GLint px, py;
GLuint stipple[32];
if (!intel_intersect_cliprects(&rect, &dest_rect, &box[i]))
continue;
/* Now go back to GL coordinates to figure out what subset of
* the bitmap we are uploading for this cliprect:
*/
box_w = rect.x2 - rect.x1;
box_h = rect.y2 - rect.y1;
srcx = rect.x1 - orig_screen_x1;
srcy = orig_screen_y2 - rect.y2;
#define DY 32
#define DX 32
/* Then, finally, chop it all into chunks that can be
* digested by hardware:
*/
for (py = 0; py < box_h; py += DY) {
for (px = 0; px < box_w; px += DX) {
int h = MIN2(DY, box_h - py);
int w = MIN2(DX, box_w - px);
GLuint sz = ALIGN(ALIGN(w,8) * h, 64)/8;
GLenum logic_op = ctx->Color.ColorLogicOpEnabled ?
ctx->Color.LogicOp : GL_COPY;
assert(sz <= sizeof(stipple));
memset(stipple, 0, sz);
/* May need to adjust this when padding has been introduced in
* sz above:
*/
if (get_bitmap_rect(width, height, unpack,
bitmap,
srcx + px, srcy + py, w, h,
(GLubyte *)stipple,
8,
GL_TRUE) == 0)
continue;
/*
*/
intelEmitImmediateColorExpandBlit( intel,
dst->cpp,
(GLubyte *)stipple,
sz,
(dst->cpp == 2) ? color565 : color8888,
dst->pitch,
dst->buffer,
0,
dst->tiled,
rect.x1 + px,
rect.y2 - (py + h),
w, h,
logic_op);
}
}
}
intel->need_flush = GL_TRUE;
out:
intel_batchbuffer_flush(intel->batch);
}
UNLOCK_HARDWARE(intel);
if (unpack->BufferObj->Name) {
/* done with PBO so unmap it now */
ctx->Driver.UnmapBuffer(ctx, GL_PIXEL_UNPACK_BUFFER_EXT,
unpack->BufferObj);
}
return GL_TRUE;
}
/**
* Use blitting to clear the renderbuffers named by 'flags'.
* Note: we can't use the ctx->DrawBuffer->_ColorDrawBufferMask field
* since that might include software renderbuffers or renderbuffers
* which we're clearing with triangles.
* \param mask bitmask of BUFFER_BIT_* values indicating buffers to clear
*/
void
intelClearWithBlit(GLcontext * ctx, GLbitfield mask)
{
struct intel_context *intel = intel_context(ctx);
struct gl_framebuffer *fb = ctx->DrawBuffer;
GLuint clear_depth;
GLbitfield skipBuffers = 0;
BATCH_LOCALS;
DBG("%s %x\n", __FUNCTION__, mask);
/*
* Compute values for clearing the buffers.
*/
clear_depth = 0;
if (mask & BUFFER_BIT_DEPTH) {
clear_depth = (GLuint) (fb->_DepthMax * ctx->Depth.Clear);
}
if (mask & BUFFER_BIT_STENCIL) {
clear_depth |= (ctx->Stencil.Clear & 0xff) << 24;
}
/* If clearing both depth and stencil, skip BUFFER_BIT_STENCIL in
* the loop below.
*/
if ((mask & BUFFER_BIT_DEPTH) && (mask & BUFFER_BIT_STENCIL)) {
skipBuffers = BUFFER_BIT_STENCIL;
}
/* XXX Move this flush/lock into the following conditional? */
intelFlush(&intel->ctx);
LOCK_HARDWARE(intel);
if (intel->numClipRects) {
GLint cx, cy, cw, ch;
drm_clip_rect_t clear;
int i;
/* Get clear bounds after locking */
cx = fb->_Xmin;
cy = fb->_Ymin;
cw = fb->_Xmax - cx;
ch = fb->_Ymax - cy;
if (fb->Name == 0) {
/* clearing a window */
/* flip top to bottom */
clear.x1 = cx + intel->drawX;
clear.y1 = intel->driDrawable->y + intel->driDrawable->h - cy - ch;
clear.x2 = clear.x1 + cw;
clear.y2 = clear.y1 + ch;
}
else {
/* clearing FBO */
assert(intel->numClipRects == 1);
assert(intel->pClipRects == &intel->fboRect);
clear.x1 = cx;
clear.y1 = cy;
clear.x2 = clear.x1 + cw;
clear.y2 = clear.y1 + ch;
/* no change to mask */
}
for (i = 0; i < intel->numClipRects; i++) {
const drm_clip_rect_t *box = &intel->pClipRects[i];
drm_clip_rect_t b;
GLuint buf;
GLuint clearMask = mask; /* use copy, since we modify it below */
GLboolean all = (cw == fb->Width && ch == fb->Height);
if (!all) {
intel_intersect_cliprects(&b, &clear, box);
}
else {
b = *box;
}
if (b.x1 >= b.x2 || b.y1 >= b.y2)
continue;
if (0)
_mesa_printf("clear %d,%d..%d,%d, mask %x\n",
b.x1, b.y1, b.x2, b.y2, mask);
/* Loop over all renderbuffers */
for (buf = 0; buf < BUFFER_COUNT && clearMask; buf++) {
const GLbitfield bufBit = 1 << buf;
if ((clearMask & bufBit) && !(bufBit & skipBuffers)) {
/* OK, clear this renderbuffer */
struct intel_region *irb_region =
intel_get_rb_region(fb, buf);
dri_bo *write_buffer =
intel_region_buffer(intel->intelScreen, irb_region,
all ? INTEL_WRITE_FULL :
INTEL_WRITE_PART);
GLuint clearVal;
GLint pitch, cpp;
GLuint BR13, CMD;
ASSERT(irb_region);
pitch = irb_region->pitch;
cpp = irb_region->cpp;
DBG("%s dst:buf(%p)/%d+%d %d,%d sz:%dx%d\n",
__FUNCTION__,
irb_region->buffer, (pitch * cpp),
irb_region->draw_offset,
b.x1, b.y1, b.x2 - b.x1, b.y2 - b.y1);
BR13 = 0xf0 << 16;
CMD = XY_COLOR_BLT_CMD;
/* Setup the blit command */
if (cpp == 4) {
BR13 |= (1 << 24) | (1 << 25);
if (buf == BUFFER_DEPTH || buf == BUFFER_STENCIL) {
if (clearMask & BUFFER_BIT_DEPTH)
CMD |= XY_BLT_WRITE_RGB;
if (clearMask & BUFFER_BIT_STENCIL)
CMD |= XY_BLT_WRITE_ALPHA;
}
else {
/* clearing RGBA */
CMD |= XY_BLT_WRITE_ALPHA | XY_BLT_WRITE_RGB;
}
}
else {
ASSERT(cpp == 2 || cpp == 0);
BR13 |= (1 << 24);
}
#ifndef I915
if (irb_region->tiled) {
CMD |= XY_DST_TILED;
pitch /= 4;
}
#endif
BR13 |= (pitch * cpp);
if (buf == BUFFER_DEPTH || buf == BUFFER_STENCIL) {
clearVal = clear_depth;
}
else {
clearVal = (cpp == 4)
? intel->ClearColor8888 : intel->ClearColor565;
}
/*
_mesa_debug(ctx, "hardware blit clear buf %d rb id %d\n",
buf, irb->Base.Name);
*/
intel_wait_flips(intel, INTEL_BATCH_NO_CLIPRECTS);
assert(b.x1 < b.x2);
assert(b.y1 < b.y2);
BEGIN_BATCH(6, INTEL_BATCH_NO_CLIPRECTS);
OUT_BATCH(CMD);
OUT_BATCH(BR13);
OUT_BATCH((b.y1 << 16) | b.x1);
OUT_BATCH((b.y2 << 16) | b.x2);
OUT_RELOC(write_buffer, DRM_BO_FLAG_MEM_TT | DRM_BO_FLAG_WRITE,
irb_region->draw_offset);
OUT_BATCH(clearVal);
ADVANCE_BATCH();
clearMask &= ~bufBit; /* turn off bit, for faster loop exit */
}
}
}
intel_batchbuffer_flush(intel->batch);
}
UNLOCK_HARDWARE(intel);
}
/**
* Copy the back color buffer to the front color buffer.
* Used for SwapBuffers().
*/
void
intelCopyBuffer(const __DRIdrawablePrivate * dPriv,
const drm_clip_rect_t * rect)
{
struct intel_context *intel;
const intelScreenPrivate *intelScreen;
int ret;
DBG("%s\n", __FUNCTION__);
assert(dPriv);
intel = intelScreenContext(dPriv->driScreenPriv->private);
if (!intel)
return;
intelScreen = intel->intelScreen;
if (intel->last_swap_fence) {
dri_fence_wait(intel->last_swap_fence);
dri_fence_unreference(intel->last_swap_fence);
intel->last_swap_fence = NULL;
}
intel->last_swap_fence = intel->first_swap_fence;
intel->first_swap_fence = NULL;
/* The LOCK_HARDWARE is required for the cliprects. Buffer offsets
* should work regardless.
*/
LOCK_HARDWARE(intel);
if (dPriv && dPriv->numClipRects) {
struct intel_framebuffer *intel_fb = dPriv->driverPrivate;
struct intel_region *src, *dst;
int nbox = dPriv->numClipRects;
drm_clip_rect_t *pbox = dPriv->pClipRects;
int cpp;
int src_pitch, dst_pitch;
unsigned short src_x, src_y;
int BR13, CMD;
int i;
src = intel_get_rb_region(&intel_fb->Base, BUFFER_BACK_LEFT);
dst = intel_get_rb_region(&intel_fb->Base, BUFFER_FRONT_LEFT);
src_pitch = src->pitch * src->cpp;
dst_pitch = dst->pitch * dst->cpp;
cpp = src->cpp;
ASSERT(intel_fb);
ASSERT(intel_fb->Base.Name == 0); /* Not a user-created FBO */
ASSERT(src);
ASSERT(dst);
ASSERT(src->cpp == dst->cpp);
if (cpp == 2) {
BR13 = (0xCC << 16) | (1 << 24);
CMD = XY_SRC_COPY_BLT_CMD;
}
else {
BR13 = (0xCC << 16) | (1 << 24) | (1 << 25);
CMD = XY_SRC_COPY_BLT_CMD | XY_BLT_WRITE_ALPHA | XY_BLT_WRITE_RGB;
}
#ifndef I915
if (src->tiled) {
CMD |= XY_SRC_TILED;
src_pitch /= 4;
}
if (dst->tiled) {
CMD |= XY_DST_TILED;
dst_pitch /= 4;
}
#endif
/* do space/cliprects check before going any further */
intel_batchbuffer_require_space(intel->batch, 8 * 4, REFERENCES_CLIPRECTS);
again:
ret = dri_bufmgr_check_aperture_space(dst->buffer);
ret |= dri_bufmgr_check_aperture_space(src->buffer);
if (ret) {
intel_batchbuffer_flush(intel->batch);
goto again;
}
for (i = 0; i < nbox; i++, pbox++) {
drm_clip_rect_t box = *pbox;
if (rect) {
if (!intel_intersect_cliprects(&box, &box, rect))
continue;
}
if (box.x1 >= box.x2 ||
box.y1 >= box.y2)
continue;
assert(box.x1 < box.x2);
assert(box.y1 < box.y2);
src_x = box.x1 - dPriv->x + dPriv->backX;
src_y = box.y1 - dPriv->y + dPriv->backY;
BEGIN_BATCH(8, REFERENCES_CLIPRECTS);
OUT_BATCH(CMD);
OUT_BATCH(BR13 | dst_pitch);
OUT_BATCH((box.y1 << 16) | box.x1);
OUT_BATCH((box.y2 << 16) | box.x2);
OUT_RELOC(dst->buffer, DRM_BO_FLAG_MEM_TT | DRM_BO_FLAG_WRITE, 0);
OUT_BATCH((src_y << 16) | src_x);
OUT_BATCH(src_pitch);
OUT_RELOC(src->buffer, DRM_BO_FLAG_MEM_TT | DRM_BO_FLAG_READ, 0);
ADVANCE_BATCH();
}
if (intel->first_swap_fence)
dri_fence_unreference(intel->first_swap_fence);
intel_batchbuffer_flush(intel->batch);
intel->first_swap_fence = intel->batch->last_fence;
if (intel->first_swap_fence)
dri_fence_reference(intel->first_swap_fence);
}
UNLOCK_HARDWARE(intel);
}
/*
* Copy the back buffer to the front buffer.
*/
void intelCopyBuffer( const __DRIdrawablePrivate *dPriv,
const drm_clip_rect_t *rect )
{
struct intel_context *intel;
GLboolean missed_target;
int64_t ust;
DBG("%s\n", __FUNCTION__);
assert(dPriv);
assert(dPriv->driContextPriv);
assert(dPriv->driContextPriv->driverPrivate);
intel = (struct intel_context *) dPriv->driContextPriv->driverPrivate;
intelFlush( &intel->ctx );
bmFinishFenceLock(intel, intel->last_swap_fence);
/* The LOCK_HARDWARE is required for the cliprects. Buffer offsets
* should work regardless.
*/
LOCK_HARDWARE( intel );
if (!rect)
{
UNLOCK_HARDWARE( intel );
driWaitForVBlank( dPriv, &intel->vbl_seq, intel->vblank_flags, & missed_target );
LOCK_HARDWARE( intel );
}
{
intelScreenPrivate *intelScreen = intel->intelScreen;
__DRIdrawablePrivate *dPriv = intel->driDrawable;
int nbox = dPriv->numClipRects;
drm_clip_rect_t *pbox = dPriv->pClipRects;
int cpp = intelScreen->cpp;
struct intel_region *src, *dst;
int BR13, CMD;
int i;
int src_pitch, dst_pitch;
if (intel->sarea->pf_current_page == 0) {
dst = intel->front_region;
src = intel->back_region;
}
else {
assert(0);
src = intel->front_region;
dst = intel->back_region;
}
src_pitch = src->pitch * src->cpp;
dst_pitch = dst->pitch * dst->cpp;
if (cpp == 2) {
BR13 = (0xCC << 16) | (1<<24);
CMD = XY_SRC_COPY_BLT_CMD;
}
else {
BR13 = (0xCC << 16) | (1<<24) | (1<<25);
CMD = (XY_SRC_COPY_BLT_CMD | XY_SRC_COPY_BLT_WRITE_ALPHA |
XY_SRC_COPY_BLT_WRITE_RGB);
}
if (src->tiled) {
CMD |= XY_SRC_TILED;
src_pitch /= 4;
}
if (dst->tiled) {
CMD |= XY_DST_TILED;
dst_pitch /= 4;
}
for (i = 0 ; i < nbox; i++, pbox++)
{
drm_clip_rect_t tmp = *pbox;
if (rect) {
if (!intel_intersect_cliprects(&tmp, &tmp, rect))
continue;
}
if (tmp.x1 > tmp.x2 ||
tmp.y1 > tmp.y2 ||
tmp.x2 > intelScreen->width ||
tmp.y2 > intelScreen->height)
continue;
BEGIN_BATCH(8, INTEL_BATCH_NO_CLIPRECTS);
OUT_BATCH( CMD );
OUT_BATCH( dst_pitch | BR13 );
OUT_BATCH( (tmp.y1 << 16) | tmp.x1 );
OUT_BATCH( (tmp.y2 << 16) | tmp.x2 );
OUT_BATCH( bmBufferOffset(intel, dst->buffer) );
OUT_BATCH( (tmp.y1 << 16) | tmp.x1 );
OUT_BATCH( src_pitch );
OUT_BATCH( bmBufferOffset(intel, src->buffer) );
ADVANCE_BATCH();
}
}
intel_batchbuffer_flush( intel->batch );
intel->second_last_swap_fence = intel->last_swap_fence;
intel->last_swap_fence = bmSetFenceLock( intel );
UNLOCK_HARDWARE( intel );
if (!rect)
{
intel->swap_count++;
(*dri_interface->getUST)(&ust);
if (missed_target) {
intel->swap_missed_count++;
intel->swap_missed_ust = ust - intel->swap_ust;
}
intel->swap_ust = ust;
}
}
/* Pros:
* - no waiting for idle before updating framebuffer.
*
* Cons:
* - if upload is by memcpy, this may actually be slower than fallback path.
* - uploads the whole image even if destination is clipped
*
* Need to benchmark.
*
* Given the questions about performance, implement for pbo's only.
* This path is definitely a win if the pbo is already in agp. If it
* turns out otherwise, we can add the code necessary to upload client
* data to agp space before performing the blit. (Though it may turn
* out to be better/simpler just to use the texture engine).
*/
static GLboolean
do_blit_drawpixels(GLcontext * ctx,
GLint x, GLint y,
GLsizei width, GLsizei height,
GLenum format, GLenum type,
const struct gl_pixelstore_attrib *unpack,
const GLvoid * pixels)
{
struct intel_context *intel = intel_context(ctx);
struct intel_region *dest = intel_drawbuf_region(intel);
struct intel_buffer_object *src = intel_buffer_object(unpack->BufferObj);
GLuint src_offset;
GLuint rowLength;
struct _DriFenceObject *fence = NULL;
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s\n", __FUNCTION__);
if (!dest) {
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s - no dest\n", __FUNCTION__);
return GL_FALSE;
}
if (src) {
/* This validation should be done by core mesa:
*/
if (!_mesa_validate_pbo_access(2, unpack, width, height, 1,
format, type, pixels)) {
_mesa_error(ctx, GL_INVALID_OPERATION, "glDrawPixels");
return GL_TRUE;
}
}
else {
/* PBO only for now:
*/
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s - not PBO\n", __FUNCTION__);
return GL_FALSE;
}
if (!intel_check_blit_format(dest, format, type)) {
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s - bad format for blit\n", __FUNCTION__);
return GL_FALSE;
}
if (!intel_check_blit_fragment_ops(ctx)) {
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s - bad GL fragment state for blitter\n",
__FUNCTION__);
return GL_FALSE;
}
if (ctx->Pixel.ZoomX != 1.0F) {
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s - bad PixelZoomX for blit\n", __FUNCTION__);
return GL_FALSE;
}
if (unpack->RowLength > 0)
rowLength = unpack->RowLength;
else
rowLength = width;
if (ctx->Pixel.ZoomY == -1.0F) {
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s - bad PixelZoomY for blit\n", __FUNCTION__);
return GL_FALSE; /* later */
y -= height;
}
else if (ctx->Pixel.ZoomY == 1.0F) {
rowLength = -rowLength;
}
else {
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s - bad PixelZoomY for blit\n", __FUNCTION__);
return GL_FALSE;
}
src_offset = (GLuint) _mesa_image_address(2, unpack, pixels, width, height,
format, type, 0, 0, 0);
intelFlush(&intel->ctx);
LOCK_HARDWARE(intel);
if (intel->driDrawable->numClipRects) {
__DRIdrawablePrivate *dPriv = intel->driDrawable;
int nbox = dPriv->numClipRects;
drm_clip_rect_t *box = dPriv->pClipRects;
drm_clip_rect_t rect;
drm_clip_rect_t dest_rect;
struct _DriBufferObject *src_buffer =
intel_bufferobj_buffer(intel, src, INTEL_READ);
int i;
dest_rect.x1 = dPriv->x + x;
dest_rect.y1 = dPriv->y + dPriv->h - (y + height);
dest_rect.x2 = dest_rect.x1 + width;
dest_rect.y2 = dest_rect.y1 + height;
for (i = 0; i < nbox; i++) {
if (!intel_intersect_cliprects(&rect, &dest_rect, &box[i]))
continue;
intelEmitCopyBlit(intel,
dest->cpp,
rowLength,
src_buffer, src_offset,
dest->pitch,
dest->buffer, 0,
rect.x1 - dest_rect.x1,
rect.y2 - dest_rect.y2,
rect.x1,
rect.y1, rect.x2 - rect.x1, rect.y2 - rect.y1,
ctx->Color.ColorLogicOpEnabled ?
ctx->Color.LogicOp : GL_COPY);
}
fence = intel_batchbuffer_flush(intel->batch);
driFenceReference(fence);
}
UNLOCK_HARDWARE(intel);
if (fence) {
driFenceFinish(fence, DRM_FENCE_TYPE_EXE | DRM_I915_FENCE_TYPE_RW, GL_FALSE);
driFenceUnReference(fence);
}
if (INTEL_DEBUG & DEBUG_PIXEL)
_mesa_printf("%s - DONE\n", __FUNCTION__);
return GL_TRUE;
}
