/* Recalculate all state from scratch. Perhaps not the most
* efficient, but this has gotten complex enough that we need
* something which is understandable and reliable.
*/
static GLboolean
i915_update_tex_unit(struct intel_context *intel, GLuint unit, GLuint ss3)
{
struct gl_context *ctx = &intel->ctx;
struct i915_context *i915 = i915_context(ctx);
struct gl_texture_unit *tUnit = &ctx->Texture.Unit[unit];
struct gl_texture_object *tObj = tUnit->_Current;
struct intel_texture_object *intelObj = intel_texture_object(tObj);
struct gl_texture_image *firstImage;
GLuint *state = i915->state.Tex[unit], format, pitch;
GLint lodbias, aniso = 0;
GLubyte border[4];
GLfloat maxlod;
memset(state, 0, sizeof(state));
/*We need to refcount these. */
if (i915->state.tex_buffer[unit] != NULL) {
drm_intel_bo_unreference(i915->state.tex_buffer[unit]);
i915->state.tex_buffer[unit] = NULL;
}
if (!intel_finalize_mipmap_tree(intel, unit))
return GL_FALSE;
/* Get first image here, since intelObj->firstLevel will get set in
* the intel_finalize_mipmap_tree() call above.
*/
firstImage = tObj->Image[0][intelObj->firstLevel];
drm_intel_bo_reference(intelObj->mt->region->buffer);
i915->state.tex_buffer[unit] = intelObj->mt->region->buffer;
i915->state.tex_offset[unit] = 0; /* Always the origin of the miptree */
format = translate_texture_format(firstImage->TexFormat,
firstImage->InternalFormat,
tObj->DepthMode);
pitch = intelObj->mt->region->pitch * intelObj->mt->cpp;
state[I915_TEXREG_MS3] =
(((firstImage->Height - 1) << MS3_HEIGHT_SHIFT) |
((firstImage->Width - 1) << MS3_WIDTH_SHIFT) | format);
if (intelObj->mt->region->tiling != I915_TILING_NONE) {
state[I915_TEXREG_MS3] |= MS3_TILED_SURFACE;
if (intelObj->mt->region->tiling == I915_TILING_Y)
state[I915_TEXREG_MS3] |= MS3_TILE_WALK;
}
/* We get one field with fraction bits for the maximum addressable
* (lowest resolution) LOD. Use it to cover both MAX_LEVEL and
* MAX_LOD.
*/
maxlod = MIN2(tObj->MaxLod, tObj->_MaxLevel - tObj->BaseLevel);
state[I915_TEXREG_MS4] =
((((pitch / 4) - 1) << MS4_PITCH_SHIFT) |
MS4_CUBE_FACE_ENA_MASK |
(U_FIXED(CLAMP(maxlod, 0.0, 11.0), 2) << MS4_MAX_LOD_SHIFT) |
((firstImage->Depth - 1) << MS4_VOLUME_DEPTH_SHIFT));
{
GLuint minFilt, mipFilt, magFilt;
switch (tObj->MinFilter) {
case GL_NEAREST:
minFilt = FILTER_NEAREST;
mipFilt = MIPFILTER_NONE;
break;
case GL_LINEAR:
minFilt = FILTER_LINEAR;
mipFilt = MIPFILTER_NONE;
break;
case GL_NEAREST_MIPMAP_NEAREST:
minFilt = FILTER_NEAREST;
mipFilt = MIPFILTER_NEAREST;
break;
case GL_LINEAR_MIPMAP_NEAREST:
minFilt = FILTER_LINEAR;
mipFilt = MIPFILTER_NEAREST;
break;
case GL_NEAREST_MIPMAP_LINEAR:
minFilt = FILTER_NEAREST;
mipFilt = MIPFILTER_LINEAR;
break;
case GL_LINEAR_MIPMAP_LINEAR:
minFilt = FILTER_LINEAR;
mipFilt = MIPFILTER_LINEAR;
break;
default:
return GL_FALSE;
}
if (tObj->MaxAnisotropy > 1.0) {
minFilt = FILTER_ANISOTROPIC;
magFilt = FILTER_ANISOTROPIC;
if (tObj->MaxAnisotropy > 2.0)
aniso = SS2_MAX_ANISO_4;
else
aniso = SS2_MAX_ANISO_2;
}
else {
switch (tObj->MagFilter) {
case GL_NEAREST:
magFilt = FILTER_NEAREST;
break;
case GL_LINEAR:
magFilt = FILTER_LINEAR;
break;
default:
return GL_FALSE;
}
}
lodbias = (int) ((tUnit->LodBias + tObj->LodBias) * 16.0);
if (lodbias < -256)
lodbias = -256;
if (lodbias > 255)
lodbias = 255;
state[I915_TEXREG_SS2] = ((lodbias << SS2_LOD_BIAS_SHIFT) &
SS2_LOD_BIAS_MASK);
/* YUV conversion:
*/
if (firstImage->TexFormat == MESA_FORMAT_YCBCR ||
firstImage->TexFormat == MESA_FORMAT_YCBCR_REV)
state[I915_TEXREG_SS2] |= SS2_COLORSPACE_CONVERSION;
/* Shadow:
*/
if (tObj->CompareMode == GL_COMPARE_R_TO_TEXTURE_ARB &&
tObj->Target != GL_TEXTURE_3D) {
if (tObj->Target == GL_TEXTURE_1D)
return GL_FALSE;
state[I915_TEXREG_SS2] |=
(SS2_SHADOW_ENABLE |
intel_translate_shadow_compare_func(tObj->CompareFunc));
minFilt = FILTER_4X4_FLAT;
magFilt = FILTER_4X4_FLAT;
}
state[I915_TEXREG_SS2] |= ((minFilt << SS2_MIN_FILTER_SHIFT) |
(mipFilt << SS2_MIP_FILTER_SHIFT) |
(magFilt << SS2_MAG_FILTER_SHIFT) |
aniso);
}
{
GLenum ws = tObj->WrapS;
GLenum wt = tObj->WrapT;
GLenum wr = tObj->WrapR;
float minlod;
/* We program 1D textures as 2D textures, so the 2D texcoord could
* result in sampling border values if we don't set the T wrap to
* repeat.
*/
if (tObj->Target == GL_TEXTURE_1D)
wt = GL_REPEAT;
/* 3D textures don't seem to respect the border color.
* Fallback if there's ever a danger that they might refer to
* it.
*
* Effectively this means fallback on 3D clamp or
* clamp_to_border.
*/
if (tObj->Target == GL_TEXTURE_3D &&
(tObj->MinFilter != GL_NEAREST ||
tObj->MagFilter != GL_NEAREST) &&
(ws == GL_CLAMP ||
wt == GL_CLAMP ||
wr == GL_CLAMP ||
ws == GL_CLAMP_TO_BORDER ||
wt == GL_CLAMP_TO_BORDER || wr == GL_CLAMP_TO_BORDER))
return GL_FALSE;
/* Only support TEXCOORDMODE_CLAMP_EDGE and TEXCOORDMODE_CUBE (not
* used) when using cube map texture coordinates
*/
if (tObj->Target == GL_TEXTURE_CUBE_MAP_ARB &&
(((ws != GL_CLAMP) && (ws != GL_CLAMP_TO_EDGE)) ||
((wt != GL_CLAMP) && (wt != GL_CLAMP_TO_EDGE))))
return GL_FALSE;
state[I915_TEXREG_SS3] = ss3; /* SS3_NORMALIZED_COORDS */
state[I915_TEXREG_SS3] |=
((translate_wrap_mode(ws) << SS3_TCX_ADDR_MODE_SHIFT) |
(translate_wrap_mode(wt) << SS3_TCY_ADDR_MODE_SHIFT) |
(translate_wrap_mode(wr) << SS3_TCZ_ADDR_MODE_SHIFT));
minlod = MIN2(tObj->MinLod, tObj->_MaxLevel - tObj->BaseLevel);
state[I915_TEXREG_SS3] |= (unit << SS3_TEXTUREMAP_INDEX_SHIFT);
state[I915_TEXREG_SS3] |= (U_FIXED(CLAMP(minlod, 0.0, 11.0), 4) <<
SS3_MIN_LOD_SHIFT);
}
/* convert border color from float to ubyte */
CLAMPED_FLOAT_TO_UBYTE(border[0], tObj->BorderColor.f[0]);
CLAMPED_FLOAT_TO_UBYTE(border[1], tObj->BorderColor.f[1]);
CLAMPED_FLOAT_TO_UBYTE(border[2], tObj->BorderColor.f[2]);
CLAMPED_FLOAT_TO_UBYTE(border[3], tObj->BorderColor.f[3]);
if (firstImage->_BaseFormat == GL_DEPTH_COMPONENT) {
/* GL specs that border color for depth textures is taken from the
* R channel, while the hardware uses A. Spam R into all the channels
* for safety.
*/
state[I915_TEXREG_SS4] = PACK_COLOR_8888(border[0],
border[0],
border[0],
border[0]);
} else {
state[I915_TEXREG_SS4] = PACK_COLOR_8888(border[3],
border[0],
border[1],
border[2]);
}
I915_ACTIVESTATE(i915, I915_UPLOAD_TEX(unit), GL_TRUE);
/* memcmp was already disabled, but definitely won't work as the
* region might now change and that wouldn't be detected:
*/
I915_STATECHANGE(i915, I915_UPLOAD_TEX(unit));
#if 0
DBG(TEXTURE, "state[I915_TEXREG_SS2] = 0x%x\n", state[I915_TEXREG_SS2]);
DBG(TEXTURE, "state[I915_TEXREG_SS3] = 0x%x\n", state[I915_TEXREG_SS3]);
DBG(TEXTURE, "state[I915_TEXREG_SS4] = 0x%x\n", state[I915_TEXREG_SS4]);
DBG(TEXTURE, "state[I915_TEXREG_MS2] = 0x%x\n", state[I915_TEXREG_MS2]);
DBG(TEXTURE, "state[I915_TEXREG_MS3] = 0x%x\n", state[I915_TEXREG_MS3]);
DBG(TEXTURE, "state[I915_TEXREG_MS4] = 0x%x\n", state[I915_TEXREG_MS4]);
#endif
return GL_TRUE;
}
/**
* Sets the sampler state for a single unit.
*/
static void
gen7_update_sampler_state(struct brw_context *brw, int unit,
struct gen7_sampler_state *sampler)
{
struct intel_context *intel = &brw->intel;
struct gl_context *ctx = &intel->ctx;
struct gl_texture_unit *texUnit = &ctx->Texture.Unit[unit];
struct gl_texture_object *texObj = texUnit->_Current;
struct gl_sampler_object *gl_sampler = _mesa_get_samplerobj(ctx, unit);
bool using_nearest = false;
switch (gl_sampler->MinFilter) {
case GL_NEAREST:
sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST;
sampler->ss0.mip_filter = BRW_MIPFILTER_NONE;
using_nearest = true;
break;
case GL_LINEAR:
sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR;
sampler->ss0.mip_filter = BRW_MIPFILTER_NONE;
break;
case GL_NEAREST_MIPMAP_NEAREST:
sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST;
sampler->ss0.mip_filter = BRW_MIPFILTER_NEAREST;
break;
case GL_LINEAR_MIPMAP_NEAREST:
sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR;
sampler->ss0.mip_filter = BRW_MIPFILTER_NEAREST;
break;
case GL_NEAREST_MIPMAP_LINEAR:
sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST;
sampler->ss0.mip_filter = BRW_MIPFILTER_LINEAR;
break;
case GL_LINEAR_MIPMAP_LINEAR:
sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR;
sampler->ss0.mip_filter = BRW_MIPFILTER_LINEAR;
break;
default:
break;
}
/* Set Anisotropy: */
if (gl_sampler->MaxAnisotropy > 1.0) {
sampler->ss0.min_filter = BRW_MAPFILTER_ANISOTROPIC;
sampler->ss0.mag_filter = BRW_MAPFILTER_ANISOTROPIC;
if (gl_sampler->MaxAnisotropy > 2.0) {
sampler->ss3.max_aniso = MIN2((gl_sampler->MaxAnisotropy - 2) / 2,
BRW_ANISORATIO_16);
}
}
else {
switch (gl_sampler->MagFilter) {
case GL_NEAREST:
sampler->ss0.mag_filter = BRW_MAPFILTER_NEAREST;
using_nearest = true;
break;
case GL_LINEAR:
sampler->ss0.mag_filter = BRW_MAPFILTER_LINEAR;
break;
default:
break;
}
}
sampler->ss3.r_wrap_mode = translate_wrap_mode(gl_sampler->WrapR,
using_nearest);
sampler->ss3.s_wrap_mode = translate_wrap_mode(gl_sampler->WrapS,
using_nearest);
sampler->ss3.t_wrap_mode = translate_wrap_mode(gl_sampler->WrapT,
using_nearest);
/* Cube-maps on 965 and later must use the same wrap mode for all 3
* coordinate dimensions. Futher, only CUBE and CLAMP are valid.
*/
if (texObj->Target == GL_TEXTURE_CUBE_MAP) {
if (ctx->Texture.CubeMapSeamless &&
(gl_sampler->MinFilter != GL_NEAREST ||
gl_sampler->MagFilter != GL_NEAREST)) {
sampler->ss3.r_wrap_mode = BRW_TEXCOORDMODE_CUBE;
sampler->ss3.s_wrap_mode = BRW_TEXCOORDMODE_CUBE;
sampler->ss3.t_wrap_mode = BRW_TEXCOORDMODE_CUBE;
} else {
sampler->ss3.r_wrap_mode = BRW_TEXCOORDMODE_CLAMP;
sampler->ss3.s_wrap_mode = BRW_TEXCOORDMODE_CLAMP;
sampler->ss3.t_wrap_mode = BRW_TEXCOORDMODE_CLAMP;
}
} else if (texObj->Target == GL_TEXTURE_1D) {
/* There's a bug in 1D texture sampling - it actually pays
* attention to the wrap_t value, though it should not.
* Override the wrap_t value here to GL_REPEAT to keep
* any nonexistent border pixels from floating in.
*/
sampler->ss3.t_wrap_mode = BRW_TEXCOORDMODE_WRAP;
}
/* Set shadow function: */
if (gl_sampler->CompareMode == GL_COMPARE_R_TO_TEXTURE_ARB) {
/* Shadowing is "enabled" by emitting a particular sampler
* message (sample_c). So need to recompile WM program when
* shadow comparison is enabled on each/any texture unit.
*/
sampler->ss1.shadow_function =
intel_translate_shadow_compare_func(gl_sampler->CompareFunc);
}
/* Set LOD bias: */
sampler->ss0.lod_bias = S_FIXED(CLAMP(texUnit->LodBias +
gl_sampler->LodBias, -16, 15), 8);
sampler->ss0.lod_preclamp = 1; /* OpenGL mode */
sampler->ss0.default_color_mode = 0; /* OpenGL/DX10 mode */
/* Set BaseMipLevel, MaxLOD, MinLOD:
*
* XXX: I don't think that using firstLevel, lastLevel works,
* because we always setup the surface state as if firstLevel ==
* level zero. Probably have to subtract firstLevel from each of
* these:
*/
sampler->ss0.base_level = U_FIXED(0, 1);
sampler->ss1.max_lod = U_FIXED(CLAMP(gl_sampler->MaxLod, 0, 13), 8);
sampler->ss1.min_lod = U_FIXED(CLAMP(gl_sampler->MinLod, 0, 13), 8);
upload_default_color(brw, gl_sampler, unit);
sampler->ss2.default_color_pointer = brw->wm.sdc_offset[unit] >> 5;
}
/**
* Sets the sampler state for a single unit.
*/
static void
gen7_update_sampler_state(struct brw_context *brw, int unit, int ss_index,
struct gen7_sampler_state *sampler,
uint32_t *sdc_offset)
{
struct gl_context *ctx = &brw->ctx;
struct gl_texture_unit *texUnit = &ctx->Texture.Unit[unit];
struct gl_texture_object *texObj = texUnit->_Current;
struct gl_sampler_object *gl_sampler = _mesa_get_samplerobj(ctx, unit);
bool using_nearest = false;
/* These don't use samplers at all. */
if (texObj->Target == GL_TEXTURE_BUFFER)
return;
switch (gl_sampler->MinFilter) {
case GL_NEAREST:
sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST;
sampler->ss0.mip_filter = BRW_MIPFILTER_NONE;
using_nearest = true;
break;
case GL_LINEAR:
sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR;
sampler->ss0.mip_filter = BRW_MIPFILTER_NONE;
break;
case GL_NEAREST_MIPMAP_NEAREST:
sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST;
sampler->ss0.mip_filter = BRW_MIPFILTER_NEAREST;
break;
case GL_LINEAR_MIPMAP_NEAREST:
sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR;
sampler->ss0.mip_filter = BRW_MIPFILTER_NEAREST;
break;
case GL_NEAREST_MIPMAP_LINEAR:
sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST;
sampler->ss0.mip_filter = BRW_MIPFILTER_LINEAR;
break;
case GL_LINEAR_MIPMAP_LINEAR:
sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR;
sampler->ss0.mip_filter = BRW_MIPFILTER_LINEAR;
break;
default:
break;
}
/* Set Anisotropy: */
if (gl_sampler->MaxAnisotropy > 1.0) {
sampler->ss0.min_filter = BRW_MAPFILTER_ANISOTROPIC;
sampler->ss0.mag_filter = BRW_MAPFILTER_ANISOTROPIC;
sampler->ss0.aniso_algorithm = 1;
if (gl_sampler->MaxAnisotropy > 2.0) {
sampler->ss3.max_aniso = MIN2((gl_sampler->MaxAnisotropy - 2) / 2,
BRW_ANISORATIO_16);
}
}
else {
switch (gl_sampler->MagFilter) {
case GL_NEAREST:
sampler->ss0.mag_filter = BRW_MAPFILTER_NEAREST;
using_nearest = true;
break;
case GL_LINEAR:
sampler->ss0.mag_filter = BRW_MAPFILTER_LINEAR;
break;
default:
break;
}
}
sampler->ss3.r_wrap_mode = translate_wrap_mode(gl_sampler->WrapR,
using_nearest);
sampler->ss3.s_wrap_mode = translate_wrap_mode(gl_sampler->WrapS,
using_nearest);
sampler->ss3.t_wrap_mode = translate_wrap_mode(gl_sampler->WrapT,
using_nearest);
/* Cube-maps on 965 and later must use the same wrap mode for all 3
* coordinate dimensions. Futher, only CUBE and CLAMP are valid.
*/
if (texObj->Target == GL_TEXTURE_CUBE_MAP ||
texObj->Target == GL_TEXTURE_CUBE_MAP_ARRAY) {
if ((ctx->Texture.CubeMapSeamless || gl_sampler->CubeMapSeamless) &&
(gl_sampler->MinFilter != GL_NEAREST ||
gl_sampler->MagFilter != GL_NEAREST)) {
sampler->ss3.r_wrap_mode = BRW_TEXCOORDMODE_CUBE;
sampler->ss3.s_wrap_mode = BRW_TEXCOORDMODE_CUBE;
sampler->ss3.t_wrap_mode = BRW_TEXCOORDMODE_CUBE;
} else {
sampler->ss3.r_wrap_mode = BRW_TEXCOORDMODE_CLAMP;
sampler->ss3.s_wrap_mode = BRW_TEXCOORDMODE_CLAMP;
sampler->ss3.t_wrap_mode = BRW_TEXCOORDMODE_CLAMP;
}
} else if (texObj->Target == GL_TEXTURE_1D) {
/* There's a bug in 1D texture sampling - it actually pays
* attention to the wrap_t value, though it should not.
* Override the wrap_t value here to GL_REPEAT to keep
* any nonexistent border pixels from floating in.
*/
sampler->ss3.t_wrap_mode = BRW_TEXCOORDMODE_WRAP;
}
/* Set shadow function: */
if (gl_sampler->CompareMode == GL_COMPARE_R_TO_TEXTURE_ARB) {
/* Shadowing is "enabled" by emitting a particular sampler
* message (sample_c). So need to recompile WM program when
* shadow comparison is enabled on each/any texture unit.
*/
sampler->ss1.shadow_function =
intel_translate_shadow_compare_func(gl_sampler->CompareFunc);
}
/* Set LOD bias: */
sampler->ss0.lod_bias = S_FIXED(CLAMP(texUnit->LodBias +
gl_sampler->LodBias, -16, 15), 8);
sampler->ss0.lod_preclamp = 1; /* OpenGL mode */
sampler->ss0.default_color_mode = 0; /* OpenGL/DX10 mode */
sampler->ss0.base_level = U_FIXED(0, 1);
sampler->ss1.max_lod = U_FIXED(CLAMP(gl_sampler->MaxLod, 0, 13), 8);
sampler->ss1.min_lod = U_FIXED(CLAMP(gl_sampler->MinLod, 0, 13), 8);
/* The sampler can handle non-normalized texture rectangle coordinates
* natively
*/
if (texObj->Target == GL_TEXTURE_RECTANGLE) {
sampler->ss3.non_normalized_coord = 1;
}
upload_default_color(brw, gl_sampler, unit, sdc_offset);
sampler->ss2.default_color_pointer = *sdc_offset >> 5;
if (sampler->ss0.min_filter != BRW_MAPFILTER_NEAREST)
sampler->ss3.address_round |= BRW_ADDRESS_ROUNDING_ENABLE_U_MIN |
BRW_ADDRESS_ROUNDING_ENABLE_V_MIN |
BRW_ADDRESS_ROUNDING_ENABLE_R_MIN;
if (sampler->ss0.mag_filter != BRW_MAPFILTER_NEAREST)
sampler->ss3.address_round |= BRW_ADDRESS_ROUNDING_ENABLE_U_MAG |
BRW_ADDRESS_ROUNDING_ENABLE_V_MAG |
BRW_ADDRESS_ROUNDING_ENABLE_R_MAG;
}
static void brw_update_sampler_state( const struct pipe_sampler_state *pipe_sampler,
unsigned sdc_gs_offset,
struct brw_sampler_state *sampler)
{
memset(sampler, 0, sizeof(*sampler));
switch (pipe_sampler->min_mip_filter) {
case PIPE_TEX_FILTER_NEAREST:
sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST;
break;
case PIPE_TEX_FILTER_LINEAR:
sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR;
break;
case PIPE_TEX_FILTER_ANISO:
sampler->ss0.min_filter = BRW_MAPFILTER_ANISOTROPIC;
break;
default:
break;
}
switch (pipe_sampler->min_mip_filter) {
case PIPE_TEX_MIPFILTER_NEAREST:
sampler->ss0.mip_filter = BRW_MIPFILTER_NEAREST;
break;
case PIPE_TEX_MIPFILTER_LINEAR:
sampler->ss0.mip_filter = BRW_MIPFILTER_LINEAR;
break;
case PIPE_TEX_MIPFILTER_NONE:
sampler->ss0.mip_filter = BRW_MIPFILTER_NONE;
break;
default:
break;
}
/* Set Anisotropy:
*/
switch (pipe_sampler->mag_img_filter) {
case PIPE_TEX_FILTER_NEAREST:
sampler->ss0.mag_filter = BRW_MAPFILTER_NEAREST;
break;
case PIPE_TEX_FILTER_LINEAR:
sampler->ss0.mag_filter = BRW_MAPFILTER_LINEAR;
break;
case PIPE_TEX_FILTER_ANISO:
sampler->ss0.mag_filter = BRW_MAPFILTER_LINEAR;
break;
default:
break;
}
if (pipe_sampler->max_anisotropy > 2.0) {
sampler->ss3.max_aniso = MAX2((pipe_sampler->max_anisotropy - 2) / 2,
BRW_ANISORATIO_16);
}
sampler->ss1.s_wrap_mode = translate_wrap_mode(pipe_sampler->wrap_s);
sampler->ss1.r_wrap_mode = translate_wrap_mode(pipe_sampler->wrap_r);
sampler->ss1.t_wrap_mode = translate_wrap_mode(pipe_sampler->wrap_t);
/* Fulsim complains if I don't do this. Hardware doesn't mind:
*/
#if 0
if (texObj->Target == GL_TEXTURE_CUBE_MAP_ARB) {
sampler->ss1.r_wrap_mode = BRW_TEXCOORDMODE_CUBE;
sampler->ss1.s_wrap_mode = BRW_TEXCOORDMODE_CUBE;
sampler->ss1.t_wrap_mode = BRW_TEXCOORDMODE_CUBE;
}
#endif
/* Set shadow function:
*/
if (pipe_sampler->compare_mode == PIPE_TEX_COMPARE_R_TO_TEXTURE) {
/* Shadowing is "enabled" by emitting a particular sampler
* message (sample_c). So need to recompile WM program when
* shadow comparison is enabled on each/any texture unit.
*/
sampler->ss0.shadow_function = intel_translate_shadow_compare_func(pipe_sampler->compare_func);
}
/* Set LOD bias:
*/
sampler->ss0.lod_bias = S_FIXED(CLAMP(pipe_sampler->lod_bias, -16, 15), 6);
sampler->ss0.lod_preclamp = 1; /* OpenGL mode */
sampler->ss0.default_color_mode = 0; /* OpenGL/DX10 mode */
/* Set BaseMipLevel, MaxLOD, MinLOD:
*
* XXX: I don't think that using firstLevel, lastLevel works,
* because we always setup the surface state as if firstLevel ==
* level zero. Probably have to subtract firstLevel from each of
* these:
*/
sampler->ss0.base_level = U_FIXED(0, 1);
sampler->ss1.max_lod = U_FIXED(MIN2(MAX2(pipe_sampler->max_lod, 0), 13), 6);
sampler->ss1.min_lod = U_FIXED(MIN2(MAX2(pipe_sampler->min_lod, 0), 13), 6);
sampler->ss2.default_color_pointer = sdc_gs_offset >> 5;
}
/* Recalculate all state from scratch. Perhaps not the most
* efficient, but this has gotten complex enough that we need
* something which is understandable and reliable.
*/
static bool
i915_update_tex_unit(struct intel_context *intel, GLuint unit, GLuint ss3)
{
struct gl_context *ctx = &intel->ctx;
struct i915_context *i915 = i915_context(ctx);
struct gl_texture_unit *tUnit = &ctx->Texture.Unit[unit];
struct gl_texture_object *tObj = tUnit->_Current;
struct intel_texture_object *intelObj = intel_texture_object(tObj);
struct gl_texture_image *firstImage;
struct gl_sampler_object *sampler = _mesa_get_samplerobj(ctx, unit);
GLuint *state = i915->state.Tex[unit], format, pitch;
GLint lodbias, aniso = 0;
GLubyte border[4];
GLfloat maxlod;
memset(state, 0, sizeof(state));
/*We need to refcount these. */
if (i915->state.tex_buffer[unit] != NULL) {
drm_intel_bo_unreference(i915->state.tex_buffer[unit]);
i915->state.tex_buffer[unit] = NULL;
}
if (!intel_finalize_mipmap_tree(intel, unit))
return false;
/* Get first image here, since intelObj->firstLevel will get set in
* the intel_finalize_mipmap_tree() call above.
*/
firstImage = tObj->Image[0][tObj->BaseLevel];
drm_intel_bo_reference(intelObj->mt->region->bo);
i915->state.tex_buffer[unit] = intelObj->mt->region->bo;
i915->state.tex_offset[unit] = intelObj->mt->offset;
format = translate_texture_format(firstImage->TexFormat,
tObj->DepthMode);
pitch = intelObj->mt->region->pitch * intelObj->mt->cpp;
state[I915_TEXREG_MS3] =
(((firstImage->Height - 1) << MS3_HEIGHT_SHIFT) |
((firstImage->Width - 1) << MS3_WIDTH_SHIFT) | format);
if (intelObj->mt->region->tiling != I915_TILING_NONE) {
state[I915_TEXREG_MS3] |= MS3_TILED_SURFACE;
if (intelObj->mt->region->tiling == I915_TILING_Y)
state[I915_TEXREG_MS3] |= MS3_TILE_WALK;
}
/* We get one field with fraction bits for the maximum addressable
* (lowest resolution) LOD. Use it to cover both MAX_LEVEL and
* MAX_LOD.
*/
maxlod = MIN2(sampler->MaxLod, tObj->_MaxLevel - tObj->BaseLevel);
state[I915_TEXREG_MS4] =
((((pitch / 4) - 1) << MS4_PITCH_SHIFT) |
MS4_CUBE_FACE_ENA_MASK |
(U_FIXED(CLAMP(maxlod, 0.0, 11.0), 2) << MS4_MAX_LOD_SHIFT) |
((firstImage->Depth - 1) << MS4_VOLUME_DEPTH_SHIFT));
{
GLuint minFilt, mipFilt, magFilt;
switch (sampler->MinFilter) {
case GL_NEAREST:
minFilt = FILTER_NEAREST;
mipFilt = MIPFILTER_NONE;
break;
case GL_LINEAR:
minFilt = FILTER_LINEAR;
mipFilt = MIPFILTER_NONE;
break;
case GL_NEAREST_MIPMAP_NEAREST:
minFilt = FILTER_NEAREST;
mipFilt = MIPFILTER_NEAREST;
break;
case GL_LINEAR_MIPMAP_NEAREST:
minFilt = FILTER_LINEAR;
mipFilt = MIPFILTER_NEAREST;
break;
case GL_NEAREST_MIPMAP_LINEAR:
minFilt = FILTER_NEAREST;
mipFilt = MIPFILTER_LINEAR;
break;
case GL_LINEAR_MIPMAP_LINEAR:
minFilt = FILTER_LINEAR;
mipFilt = MIPFILTER_LINEAR;
break;
default:
return false;
}
if (sampler->MaxAnisotropy > 1.0) {
minFilt = FILTER_ANISOTROPIC;
magFilt = FILTER_ANISOTROPIC;
if (sampler->MaxAnisotropy > 2.0)
aniso = SS2_MAX_ANISO_4;
else
aniso = SS2_MAX_ANISO_2;
}
else {
switch (sampler->MagFilter) {
case GL_NEAREST:
magFilt = FILTER_NEAREST;
break;
case GL_LINEAR:
magFilt = FILTER_LINEAR;
break;
default:
return false;
}
}
lodbias = (int) ((tUnit->LodBias + sampler->LodBias) * 16.0);
if (lodbias < -256)
lodbias = -256;
if (lodbias > 255)
lodbias = 255;
state[I915_TEXREG_SS2] = ((lodbias << SS2_LOD_BIAS_SHIFT) &
SS2_LOD_BIAS_MASK);
/* YUV conversion:
*/
if (firstImage->TexFormat == MESA_FORMAT_YCBCR ||
firstImage->TexFormat == MESA_FORMAT_YCBCR_REV)
state[I915_TEXREG_SS2] |= SS2_COLORSPACE_CONVERSION;
/* Shadow:
*/
if (sampler->CompareMode == GL_COMPARE_R_TO_TEXTURE_ARB &&
tObj->Target != GL_TEXTURE_3D) {
if (tObj->Target == GL_TEXTURE_1D)
return false;
state[I915_TEXREG_SS2] |=
(SS2_SHADOW_ENABLE |
intel_translate_shadow_compare_func(sampler->CompareFunc));
minFilt = FILTER_4X4_FLAT;
magFilt = FILTER_4X4_FLAT;
}
state[I915_TEXREG_SS2] |= ((minFilt << SS2_MIN_FILTER_SHIFT) |
(mipFilt << SS2_MIP_FILTER_SHIFT) |
(magFilt << SS2_MAG_FILTER_SHIFT) |
aniso);
}
{
GLenum ws = sampler->WrapS;
GLenum wt = sampler->WrapT;
GLenum wr = sampler->WrapR;
float minlod;
/* We program 1D textures as 2D textures, so the 2D texcoord could
* result in sampling border values if we don't set the T wrap to
* repeat.
*/
if (tObj->Target == GL_TEXTURE_1D)
wt = GL_REPEAT;
/* 3D textures don't seem to respect the border color.
* Fallback if there's ever a danger that they might refer to
* it.
*
* Effectively this means fallback on 3D clamp or
* clamp_to_border.
*/
if (tObj->Target == GL_TEXTURE_3D &&
(sampler->MinFilter != GL_NEAREST ||
sampler->MagFilter != GL_NEAREST) &&
(ws == GL_CLAMP ||
wt == GL_CLAMP ||
wr == GL_CLAMP ||
ws == GL_CLAMP_TO_BORDER ||
wt == GL_CLAMP_TO_BORDER || wr == GL_CLAMP_TO_BORDER))
return false;
/* Only support TEXCOORDMODE_CLAMP_EDGE and TEXCOORDMODE_CUBE (not
* used) when using cube map texture coordinates
*/
if (tObj->Target == GL_TEXTURE_CUBE_MAP_ARB &&
(((ws != GL_CLAMP) && (ws != GL_CLAMP_TO_EDGE)) ||
((wt != GL_CLAMP) && (wt != GL_CLAMP_TO_EDGE))))
return false;
/*
* According to 3DSTATE_MAP_STATE at page of 104 in Bspec
* Vol3d 3D Instructions:
* [DevGDG and DevAlv]: Must be a power of 2 for cube maps.
* [DevLPT, DevCST and DevBLB]: If not a power of 2, cube maps
* must have all faces enabled.
*
* But, as I tested on pineview(DevBLB derived), the rendering is
* bad(you will find the color isn't samplered right in some
* fragments). After checking, it seems that the texture layout is
* wrong: making the width and height align of 4(although this
* doesn't make much sense) will fix this issue and also broke some
* others. Well, Bspec mentioned nothing about the layout alignment
* and layout for NPOT cube map. I guess the Bspec just assume it's
* a POT cube map.
*
* Thus, I guess we need do this for other platforms as well.
*/
if (tObj->Target == GL_TEXTURE_CUBE_MAP_ARB &&
!is_power_of_two(firstImage->Height))
return false;
state[I915_TEXREG_SS3] = ss3; /* SS3_NORMALIZED_COORDS */
state[I915_TEXREG_SS3] |=
((translate_wrap_mode(ws) << SS3_TCX_ADDR_MODE_SHIFT) |
(translate_wrap_mode(wt) << SS3_TCY_ADDR_MODE_SHIFT) |
(translate_wrap_mode(wr) << SS3_TCZ_ADDR_MODE_SHIFT));
minlod = MIN2(sampler->MinLod, tObj->_MaxLevel - tObj->BaseLevel);
state[I915_TEXREG_SS3] |= (unit << SS3_TEXTUREMAP_INDEX_SHIFT);
state[I915_TEXREG_SS3] |= (U_FIXED(CLAMP(minlod, 0.0, 11.0), 4) <<
SS3_MIN_LOD_SHIFT);
}
/* convert border color from float to ubyte */
CLAMPED_FLOAT_TO_UBYTE(border[0], sampler->BorderColor.f[0]);
CLAMPED_FLOAT_TO_UBYTE(border[1], sampler->BorderColor.f[1]);
CLAMPED_FLOAT_TO_UBYTE(border[2], sampler->BorderColor.f[2]);
CLAMPED_FLOAT_TO_UBYTE(border[3], sampler->BorderColor.f[3]);
if (firstImage->_BaseFormat == GL_DEPTH_COMPONENT) {
/* GL specs that border color for depth textures is taken from the
* R channel, while the hardware uses A. Spam R into all the channels
* for safety.
*/
state[I915_TEXREG_SS4] = PACK_COLOR_8888(border[0],
border[0],
border[0],
border[0]);
} else {
state[I915_TEXREG_SS4] = PACK_COLOR_8888(border[3],
border[0],
border[1],
border[2]);
}
I915_ACTIVESTATE(i915, I915_UPLOAD_TEX(unit), true);
/* memcmp was already disabled, but definitely won't work as the
* region might now change and that wouldn't be detected:
*/
I915_STATECHANGE(i915, I915_UPLOAD_TEX(unit));
#if 0
DBG(TEXTURE, "state[I915_TEXREG_SS2] = 0x%x\n", state[I915_TEXREG_SS2]);
DBG(TEXTURE, "state[I915_TEXREG_SS3] = 0x%x\n", state[I915_TEXREG_SS3]);
DBG(TEXTURE, "state[I915_TEXREG_SS4] = 0x%x\n", state[I915_TEXREG_SS4]);
DBG(TEXTURE, "state[I915_TEXREG_MS2] = 0x%x\n", state[I915_TEXREG_MS2]);
DBG(TEXTURE, "state[I915_TEXREG_MS3] = 0x%x\n", state[I915_TEXREG_MS3]);
DBG(TEXTURE, "state[I915_TEXREG_MS4] = 0x%x\n", state[I915_TEXREG_MS4]);
#endif
return true;
}
