int
main (void)
{
IRMP_DATA irmp_data;
ROM_FPUEnable();
ROM_FPUStackingEnable();
ROM_SysCtlClockSet(SYSCTL_SYSDIV_5|SYSCTL_USE_PLL|SYSCTL_XTAL_16MHZ|SYSCTL_OSC_MAIN);
irmp_init(); // initialize irmp
timer1_init(); // initialize timer1
sei (); // enable interrupts
for (;;)
{
if (irmp_get_data (&irmp_data))
{
// ir signal decoded, do something here...
// irmp_data.protocol is the protocol, see irmp.h
// irmp_data.address is the address/manufacturer code of ir sender
// irmp_data.command is the command code
// irmp_protocol_names[irmp_data.protocol] is the protocol name (if enabled, see irmpconfig.h)
}
}
}
void store_new_wakeup(void)
{
uint8_t idx;
IRMP_DATA wakeup_IRData;
irmp_get_data(&wakeup_IRData); // flush input of irmp data
blink_LED();
/* 5 seconds to press button on remote */
delay_ms(5000);
if (irmp_get_data(&wakeup_IRData)) {
wakeup_IRData.flags = 0;
idx = (MACRO_DEPTH + 1) * SIZEOF_IR/2 * MACRO_SLOTS;
/* store received wakeup IRData in first wakeup slot */
eeprom_store(idx, (uint8_t *) &wakeup_IRData);
blink_LED();
}
}
void IRTask ( void * pvParameters )
{
TimerInit ( );
irmp_init ( ); // initialize irmp
IRMP_DATA irmp_data;
while ( 1 )
{
if ( irmp_get_data ( &irmp_data ) )
{
printf ( "Protocol: %d, Address: %d, Command: %d, Flags: %d\n",
( uint16_t ) irmp_data.protocol,
irmp_data.command,
irmp_data.flags,
( uint16_t ) irmp_data.protocol );
};
}
}
int
main (void)
{
IRMP_DATA irmp_data;
irmp_init(); // initialize irmp
timer2_init(); // initialize timer2
for (;;)
{
if (irmp_get_data (&irmp_data))
{
// ir signal decoded, do something here...
// irmp_data.protocol is the protocol, see irmp.h
// irmp_data.address is the address/manufacturer code of ir sender
// irmp_data.command is the command code
// irmp_protocol_names[irmp_data.protocol] is the protocol name (if enabled, see irmpconfig.h)
}
}
}
int main ( void )
{
timer2ini ( );
SystemInit ( );
irmp_init ( ); // initialize irmp
IRMP_DATA irmp_data;
while ( 1 )
{
if ( irmp_get_data ( &irmp_data ) )
{
printf ( "Protocol: %d, Address: %d, Command: %d, Flags: %d\n",
( uint16_t ) irmp_data.protocol,
irmp_data.command,
irmp_data.flags,
( uint16_t ) irmp_data.protocol );
};
};
};
int
main (void)
{
IRMP_DATA irmp_data;
irmp_init(); // initialize irmp
// infinite loop, interrupts will blink PORTD pins and handle UART communications.
while (1)
{
LATBbits.LATB0 = ~LATBbits.LATB0;
if (irmp_get_data (&irmp_data))
{
// ir signal decoded, do something here...
// irmp_data.protocol is the protocol, see irmp.h
// irmp_data.address is the address/manufacturer code of ir sender
// irmp_data.command is the command code
// irmp_protocol_names[irmp_data.protocol] is the protocol name (if enabled, see irmpconfig.h)
printf("proto %d addr %d cmd %d\n", irmp_data.protocol, irmp_data.address, irmp_data.command );
}
}
}
static void
user_procTask(os_event_t *events)
{
int rc = irmp_get_data (&irmp_data);
if (rc)
{
os_printf("\nIRMP %10s(%2d): addr=0x%04x cmd=0x%04x, f=%d ",
irmp_protocol_names[ irmp_data.protocol],
irmp_data.protocol,
irmp_data.address,
irmp_data.command,
irmp_data.flags
);
}
// https://github.com/SuperHouse/esp-open-rtos/issues/18
// uart_rx_one_char ist offenbar eine ROM-Funktion.
int c = my_rx_one_char();
if(c != -1)
{
uart_tx_one_char(0,c);
os_printf("(0x%02x, %d) ",c,c);
switch(c)
{
case '.':
os_printf("\nTime=%d, GPIO12=%d, ",
system_get_time(),GPIO_INPUT_GET(12));
os_printf("gpio=%08x ",gpio_input_get());
break;
}
}
os_delay_us(100);
system_os_post(user_procTaskPrio, 0, 0 );
}
int
main (void)
{
IRMP_DATA irmp_data;
char c;
InitApp();
PWMoff();
RS232init();
__delay_ms(200);
printf("IRMP PIC 12F1840 1.8 ws\r\n");
irmp_init(); // initialize irmp
timer1_init(); // initialize timer1
ei(); // enable interrupts
TMR1ON=1; // start timer
for (;;)
{
if (kbhit())
{
c=getch();
if (c>32 && c<127) putch(c);
putch(' ');
if (c=='.')
{
printf("MX115OFF ");
RC5(0x15,0x0c,2); // Philips MC115 AUX OFF
}
else if (c=='n')
{
printf("NEC ");
NEC(0x55,0xaa);
}
else
{
putch('?');
continue;
}
while (irsnd_is_busy ()) ;
printf("PR2 %d\r\n",PR2);
continue;
}
if (irmp_get_data (&irmp_data))
{
printf("P ");
printf("%d a=0x%04x c=0x%04x f=0x%02x (",irmp_data.protocol, irmp_data.address,irmp_data.command,irmp_data.flags);
#if IRMP_PROTOCOL_NAMES
printf(irmp_protocol_names[irmp_data.protocol]);
#else
switch(irmp_data.protocol)
{
case 1:
printf("Sony");
break;
case 2:
printf("NEC");
break;
case 7:
printf("RC5");
break;
case 0x21:
printf("Ortek");
break;
}
#endif
printf(")\r\n");
}
}
}
/*-------------------------------------------------------------------------------------------------------------------------------------------
* main function
*-------------------------------------------------------------------------------------------------------------------------------------------
*/
int
main ()
{
static uint_fast8_t last_ldr_value = 0xFF;
struct tm tm;
LISTENER_DATA lis;
ESP8266_INFO * esp8266_infop;
uint_fast8_t esp8266_is_up = 0;
uint_fast8_t code;
#if SAVE_RAM == 0
IRMP_DATA irmp_data;
uint32_t stop_time;
uint_fast8_t cmd;
#endif
uint_fast8_t status_led_cnt = 0;
uint_fast8_t display_flag = DISPLAY_FLAG_UPDATE_ALL;
uint_fast8_t show_temperature = 0;
uint_fast8_t time_changed = 0;
uint_fast8_t power_is_on = 1;
uint_fast8_t night_power_is_on = 1;
uint_fast8_t ldr_value;
uint_fast8_t ap_mode = 0;
SystemInit ();
SystemCoreClockUpdate(); // needed for Nucleo board
#if defined (STM32F103) // disable JTAG to get back PB3, PB4, PA13, PA14, PA15
RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); // turn on clock for the alternate function register
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE); // disable the JTAG, enable the SWJ interface
#endif
log_init (); // initilize logger on uart
#if SAVE_RAM == 0
irmp_init (); // initialize IRMP
#endif
timer2_init (); // initialize timer2 for IRMP, DCF77, EEPROM etc.
delay_init (DELAY_RESOLUTION_1_US); // initialize delay functions with granularity of 1 us
board_led_init (); // initialize GPIO for green LED on disco or nucleo board
button_init (); // initialize GPIO for user button on disco or nucleo board
rtc_init (); // initialize I2C RTC
eeprom_init (); // initialize I2C EEPROM
if (button_pressed ()) // set ESP8266 into flash mode
{
board_led_on ();
esp8266_flash ();
}
log_msg ("\r\nWelcome to WordClock Logger!");
log_msg ("----------------------------");
log_str ("Version: ");
log_msg (VERSION);
if (rtc_is_up)
{
log_msg ("rtc is online");
}
else
{
log_msg ("rtc is offline");
}
if (eeprom_is_up)
{
log_msg ("eeprom is online");
read_version_from_eeprom ();
log_printf ("current eeprom version: 0x%08x\r\n", eeprom_version);
if ((eeprom_version & 0xFF0000FF) == 0x00000000)
{ // Upper and Lower Byte must be 0x00
if (eeprom_version >= EEPROM_VERSION_1_5_0)
{
#if SAVE_RAM == 0
log_msg ("reading ir codes from eeprom");
remote_ir_read_codes_from_eeprom ();
#endif
log_msg ("reading display configuration from eeprom");
display_read_config_from_eeprom ();
log_msg ("reading timeserver data from eeprom");
timeserver_read_data_from_eeprom ();
}
if (eeprom_version >= EEPROM_VERSION_1_7_0)
{
log_msg ("reading night timers from eeprom");
night_read_data_from_eeprom ();
}
}
}
else
{
log_msg ("eeprom is offline");
}
ldr_init (); // initialize LDR (ADC)
display_init (); // initialize display
dcf77_init (); // initialize DCF77
night_init (); // initialize night time routines
short_isr = 1;
temp_init (); // initialize DS18xx
short_isr = 0;
display_reset_led_states ();
display_mode = display_get_display_mode ();
animation_mode = display_get_animation_mode ();
auto_brightness = display_get_automatic_brightness_control ();
if (eeprom_is_up)
{
if (eeprom_version != EEPROM_VERSION)
{
log_printf ("updating EEPROM to version 0x%08x\r\n", EEPROM_VERSION);
eeprom_version = EEPROM_VERSION;
write_version_to_eeprom ();
#if SAVE_RAM == 0
remote_ir_write_codes_to_eeprom ();
#endif
display_write_config_to_eeprom ();
timeserver_write_data_to_eeprom ();
night_write_data_to_eeprom ();
eeprom_version = EEPROM_VERSION;
}
}
ds3231_flag = 1;
#if SAVE_RAM == 0
stop_time = uptime + 3; // wait 3 seconds for IR signal...
display_set_status_led (1, 1, 1); // show white status LED
while (uptime < stop_time)
{
if (irmp_get_data (&irmp_data)) // got IR signal?
{
display_set_status_led (1, 0, 0); // yes, show red status LED
delay_sec (1); // and wait 1 second
(void) irmp_get_data (&irmp_data); // flush input of IRMP now
display_set_status_led (0, 0, 0); // and switch status LED off
log_msg ("calling IR learn function");
if (remote_ir_learn ()) // learn IR commands
{
remote_ir_write_codes_to_eeprom (); // if successful, save them in EEPROM
}
break; // and break the loop
}
}
#endif
display_set_status_led (0, 0, 0); // switch off status LED
esp8266_init ();
esp8266_infop = esp8266_get_info ();
while (1)
{
if (! ap_mode && esp8266_is_up && button_pressed ()) // if user pressed user button, set ESP8266 to AP mode
{
ap_mode = 1;
log_msg ("user button pressed: configuring esp8266 as access point");
esp8266_is_online = 0;
esp8266_infop->is_online = 0;
esp8266_infop->ipaddress[0] = '\0';
esp8266_accesspoint ("wordclock", "1234567890");
}
if (status_led_cnt)
{
status_led_cnt--;
if (! status_led_cnt)
{
display_set_status_led (0, 0, 0);
}
}
if ((code = listener (&lis)) != 0)
{
display_set_status_led (1, 0, 0); // got net command, light red status LED
status_led_cnt = STATUS_LED_FLASH_TIME;
switch (code)
{
case LISTENER_SET_COLOR_CODE: // set color
{
display_set_colors (&(lis.rgb));
log_printf ("command: set colors to %d %d %d\r\n", lis.rgb.red, lis.rgb.green, lis.rgb.blue);
break;
}
case LISTENER_POWER_CODE: // power on/off
{
if (power_is_on != lis.power)
{
power_is_on = lis.power;
display_flag = DISPLAY_FLAG_UPDATE_ALL;
log_msg ("command: set power");
}
break;
}
case LISTENER_DISPLAY_MODE_CODE: // set display mode
{
if (display_mode != lis.mode)
{
display_mode = display_set_display_mode (lis.mode);
display_flag = DISPLAY_FLAG_UPDATE_ALL;
log_printf ("command: set display mode to %d\r\n", display_mode);
}
break;
}
case LISTENER_ANIMATION_MODE_CODE: // set animation mode
{
if (animation_mode != lis.mode)
{
animation_mode = display_set_animation_mode (lis.mode);
animation_flag = 0;
display_flag = DISPLAY_FLAG_UPDATE_ALL;
log_printf ("command: set animation mode to %d\r\n", animation_flag);
}
break;
}
case LISTENER_DISPLAY_TEMPERATURE_CODE: // set animation mode
{
show_temperature = 1;
log_msg ("command: show temperature");
break;
}
case LISTENER_SET_BRIGHTNESS_CODE: // set brightness
{
if (auto_brightness)
{
auto_brightness = 0;
last_ldr_value = 0xFF;
display_set_automatic_brightness_control (auto_brightness);
}
display_set_brightness (lis.brightness);
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
log_printf ("command: set brightness to %d, disable autmomatic brightness control per LDR\r\n", lis.brightness);
break;
}
case LISTENER_SET_AUTOMATIC_BRIHGHTNESS_CODE: // automatic brightness control on/off
{
if (lis.automatic_brightness_control)
{
auto_brightness = 1;
log_msg ("command: enable automatic brightness control");
}
else
{
auto_brightness = 0;
log_msg ("command: disable automatic brightness control");
}
last_ldr_value = 0xFF;
display_set_automatic_brightness_control (auto_brightness);
break;
}
case LISTENER_TEST_DISPLAY_CODE: // test display
{
log_msg ("command: start display test");
display_test ();
break;
}
case LISTENER_SET_DATE_TIME_CODE: // set date/time
{
if (rtc_is_up)
{
rtc_set_date_time (&(lis.tm));
}
if (hour != (uint_fast8_t) lis.tm.tm_hour || minute != (uint_fast8_t) lis.tm.tm_min)
{
display_flag = DISPLAY_FLAG_UPDATE_ALL;
}
wday = lis.tm.tm_wday;
hour = lis.tm.tm_hour;
minute = lis.tm.tm_min;
second = lis.tm.tm_sec;
log_printf ("command: set time to %s %4d-%02d-%02d %02d:%02d:%02d\r\n",
wdays_en[lis.tm.tm_wday], lis.tm.tm_year + 1900, lis.tm.tm_mon + 1, lis.tm.tm_mday,
lis.tm.tm_hour, lis.tm.tm_min, lis.tm.tm_sec);
break;
}
case LISTENER_GET_NET_TIME_CODE: // get net time
{
net_time_flag = 1;
log_msg ("command: start net time request");
break;
}
case LISTENER_IR_LEARN_CODE: // IR learn
{
#if SAVE_RAM == 0
log_msg ("command: learn IR codes");
if (remote_ir_learn ())
{
remote_ir_write_codes_to_eeprom ();
}
#endif
break;
}
case LISTENER_SAVE_DISPLAY_CONFIGURATION: // save display configuration
{
display_write_config_to_eeprom ();
log_msg ("command: save display settings");
break;
}
}
}
if (auto_brightness && ldr_poll_brightness (&ldr_value))
{
if (ldr_value + 1 < last_ldr_value || ldr_value > last_ldr_value + 1) // difference greater than 2
{
log_printf ("ldr: old brightnes: %d new brightness: %d\r\n", last_ldr_value, ldr_value);
last_ldr_value = ldr_value;
display_set_brightness (ldr_value);
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
}
}
if (!esp8266_is_up) // esp8266 up yet?
{
if (esp8266_infop->is_up)
{
esp8266_is_up = 1;
log_msg ("esp8266 now up");
}
}
else
{ // esp8266 is up...
if (! esp8266_is_online) // but not online yet...
{
if (esp8266_infop->is_online) // now online?
{
char buf[32];
esp8266_is_online = 1;
log_msg ("esp8266 now online");
sprintf (buf, " IP %s", esp8266_infop->ipaddress);
display_banner (buf);
display_flag = DISPLAY_FLAG_UPDATE_ALL;
net_time_flag = 1;
}
}
}
if (dcf77_time(&tm))
{
display_set_status_led (1, 1, 0); // got DCF77 time, light yellow = green + red LED
status_led_cnt = 50;
if (rtc_is_up)
{
rtc_set_date_time (&tm);
}
if (hour != (uint_fast8_t) tm.tm_hour || minute != (uint_fast8_t) tm.tm_min)
{
display_flag = DISPLAY_FLAG_UPDATE_ALL;
}
wday = tm.tm_wday;
hour = tm.tm_hour;
minute = tm.tm_min;
second = tm.tm_sec;
log_printf ("dcf77: %s %4d-%02d-%02d %02d:%02d:%02d\r\n",
wdays_en[tm.tm_wday], tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec);
}
if (ds3231_flag)
{
if (rtc_is_up && rtc_get_date_time (&tm))
{
if (hour != (uint_fast8_t) tm.tm_hour || minute != (uint_fast8_t) tm.tm_min)
{
display_flag = DISPLAY_FLAG_UPDATE_ALL;
}
wday = tm.tm_wday;
hour = tm.tm_hour;
minute = tm.tm_min;
second = tm.tm_sec;
log_printf ("read rtc: %s %4d-%02d-%02d %02d:%02d:%02d\r\n",
wdays_en[tm.tm_wday], tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec);
}
ds3231_flag = 0;
}
if (auto_brightness && ldr_conversion_flag)
{
ldr_start_conversion ();
ldr_conversion_flag = 0;
}
if (net_time_flag)
{
if (esp8266_infop->is_online)
{
display_set_status_led (0, 0, 1); // light blue status LED
status_led_cnt = STATUS_LED_FLASH_TIME;
timeserver_start_timeserver_request (); // start a timeserver request, answer follows...
}
net_time_flag = 0;
net_time_countdown = 3800; // next net time after 3800 sec
}
if (show_time_flag) // set every full minute
{
#if WCLOCK24H == 1
display_flag = DISPLAY_FLAG_UPDATE_ALL;
#else
if (minute % 5)
{
display_flag = DISPLAY_FLAG_UPDATE_MINUTES; // only update minute LEDs
}
else
{
display_flag = DISPLAY_FLAG_UPDATE_ALL;
}
#endif
show_time_flag = 0;
}
if (power_is_on == night_power_is_on && night_check_night_times (power_is_on, wday, hour * 60 + minute))
{
power_is_on = ! power_is_on;
night_power_is_on = ! night_power_is_on;
display_flag = DISPLAY_FLAG_UPDATE_ALL;
log_printf ("Found Timer: %s at %02d:%02d\r\n", power_is_on ? "on" : "off", hour, minute);
}
if (show_temperature)
{
uint_fast8_t temperature_index;
show_temperature = 0;
if (ds18xx_is_up)
{
short_isr = 1;
temperature_index = temp_read_temp_index ();
short_isr = 0;
log_printf ("got temperature from DS18xxx: %d%s\r\n", temperature_index / 2, (temperature_index % 2) ? ".5" : "");
}
else if (rtc_is_up)
{
temperature_index = rtc_get_temperature_index ();
log_printf ("got temperature from RTC: %d%s\r\n", temperature_index / 2, (temperature_index % 2) ? ".5" : "");
}
else
{
temperature_index = 0xFF;
log_msg ("no temperature available");
}
if (temperature_index != 0xFF)
{
display_temperature (power_is_on, temperature_index);
#if WCLOCK24H == 1 // WC24H shows temperature with animation, WC12H rolls itself
uint32_t stop_time;
stop_time = uptime + 5;
while (uptime < stop_time)
{
if (animation_flag)
{
animation_flag = 0;
display_animation ();
}
}
#endif
display_flag = DISPLAY_FLAG_UPDATE_ALL; // force update
}
}
if (display_flag) // refresh display (time/mode changed)
{
log_msg ("update display");
#if WCLOCK24H == 1
if (display_mode == MODES_COUNT - 1) // temperature
{
uint_fast8_t temperature_index;
if (ds18xx_is_up)
{
short_isr = 1;
temperature_index = temp_read_temp_index ();
short_isr = 0;
log_printf ("got temperature from DS18xxx: %d%s\r\n", temperature_index / 2, (temperature_index % 2) ? ".5" : "");
}
else if (rtc_is_up)
{
temperature_index = rtc_get_temperature_index ();
log_printf ("got temperature from RTC: %d%s\r\n", temperature_index / 2, (temperature_index % 2) ? ".5" : "");
}
else
{
temperature_index = 0x00;
log_msg ("no temperature available");
}
display_clock (power_is_on, 0, temperature_index - 20, display_flag); // show new time
}
else
{
display_clock (power_is_on, hour, minute, display_flag); // show new time
}
#else
display_clock (power_is_on, hour, minute, display_flag); // show new time
#endif
display_flag = DISPLAY_FLAG_NONE;
}
if (animation_flag)
{
animation_flag = 0;
display_animation ();
}
if (dcf77_flag)
{
dcf77_flag = 0;
dcf77_tick ();
}
#if SAVE_RAM == 0
cmd = remote_ir_get_cmd (); // get IR command
if (cmd != REMOTE_IR_CMD_INVALID) // got IR command, light green LED
{
display_set_status_led (1, 0, 0);
status_led_cnt = STATUS_LED_FLASH_TIME;
}
if (cmd != REMOTE_IR_CMD_INVALID) // if command valid, log command code
{
switch (cmd)
{
case REMOTE_IR_CMD_POWER: log_msg ("IRMP: POWER key"); break;
case REMOTE_IR_CMD_OK: log_msg ("IRMP: OK key"); break;
case REMOTE_IR_CMD_DECREMENT_DISPLAY_MODE: log_msg ("IRMP: decrement display mode"); break;
case REMOTE_IR_CMD_INCREMENT_DISPLAY_MODE: log_msg ("IRMP: increment display mode"); break;
case REMOTE_IR_CMD_DECREMENT_ANIMATION_MODE: log_msg ("IRMP: decrement animation mode"); break;
case REMOTE_IR_CMD_INCREMENT_ANIMATION_MODE: log_msg ("IRMP: increment animation mode"); break;
case REMOTE_IR_CMD_DECREMENT_HOUR: log_msg ("IRMP: decrement hour"); break;
case REMOTE_IR_CMD_INCREMENT_HOUR: log_msg ("IRMP: increment hour"); break;
case REMOTE_IR_CMD_DECREMENT_MINUTE: log_msg ("IRMP: decrement minute"); break;
case REMOTE_IR_CMD_INCREMENT_MINUTE: log_msg ("IRMP: increment minute"); break;
case REMOTE_IR_CMD_DECREMENT_BRIGHTNESS_RED: log_msg ("IRMP: decrement red brightness"); break;
case REMOTE_IR_CMD_INCREMENT_BRIGHTNESS_RED: log_msg ("IRMP: increment red brightness"); break;
case REMOTE_IR_CMD_DECREMENT_BRIGHTNESS_GREEN: log_msg ("IRMP: decrement green brightness"); break;
case REMOTE_IR_CMD_INCREMENT_BRIGHTNESS_GREEN: log_msg ("IRMP: increment green brightness"); break;
case REMOTE_IR_CMD_DECREMENT_BRIGHTNESS_BLUE: log_msg ("IRMP: decrement blue brightness"); break;
case REMOTE_IR_CMD_INCREMENT_BRIGHTNESS_BLUE: log_msg ("IRMP: increment blue brightness"); break;
case REMOTE_IR_CMD_DECREMENT_BRIGHTNESS: log_msg ("IRMP: decrement brightness"); break;
case REMOTE_IR_CMD_INCREMENT_BRIGHTNESS: log_msg ("IRMP: increment brightness"); break;
case REMOTE_IR_CMD_GET_TEMPERATURE: log_msg ("IRMP: get temperature"); break;
}
}
switch (cmd)
{
case REMOTE_IR_CMD_POWER:
{
power_is_on = ! power_is_on;
display_flag = DISPLAY_FLAG_UPDATE_ALL;
break;
}
case REMOTE_IR_CMD_OK:
{
display_write_config_to_eeprom ();
break;
}
case REMOTE_IR_CMD_DECREMENT_DISPLAY_MODE: // decrement display mode
{
display_mode = display_decrement_display_mode ();
display_flag = DISPLAY_FLAG_UPDATE_ALL;
break;
}
case REMOTE_IR_CMD_INCREMENT_DISPLAY_MODE: // increment display mode
{
display_mode = display_increment_display_mode ();
display_flag = DISPLAY_FLAG_UPDATE_ALL;
break;
}
case REMOTE_IR_CMD_DECREMENT_ANIMATION_MODE: // decrement display mode
{
animation_mode = display_decrement_animation_mode ();
display_flag = DISPLAY_FLAG_UPDATE_ALL;
break;
}
case REMOTE_IR_CMD_INCREMENT_ANIMATION_MODE: // increment display mode
{
animation_mode = display_increment_animation_mode ();
display_flag = DISPLAY_FLAG_UPDATE_ALL;
break;
}
case REMOTE_IR_CMD_DECREMENT_HOUR: // decrement hour
{
if (hour > 0)
{
hour--;
}
else
{
hour = 23;
}
second = 0;
display_flag = DISPLAY_FLAG_UPDATE_ALL;
time_changed = 1;
break;
}
case REMOTE_IR_CMD_INCREMENT_HOUR: // increment hour
{
if (hour < 23)
{
hour++;
}
else
{
hour = 0;
}
second = 0;
display_flag = DISPLAY_FLAG_UPDATE_ALL;
time_changed = 1;
break;
}
case REMOTE_IR_CMD_DECREMENT_MINUTE: // decrement minute
{
if (minute > 0)
{
minute--;
}
else
{
minute = 59;
}
second = 0;
display_flag = DISPLAY_FLAG_UPDATE_ALL;
time_changed = 1;
break;
}
case REMOTE_IR_CMD_INCREMENT_MINUTE: // increment minute
{
if (minute < 59)
{
minute++;
}
else
{
minute = 0;
}
second = 0;
display_flag = DISPLAY_FLAG_UPDATE_ALL;
time_changed = 1;
break;
}
case REMOTE_IR_CMD_DECREMENT_BRIGHTNESS_RED: // decrement red brightness
{
display_decrement_color_red ();
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_INCREMENT_BRIGHTNESS_RED: // increment red brightness
{
display_increment_color_red ();
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_DECREMENT_BRIGHTNESS_GREEN: // decrement green brightness
{
display_decrement_color_green ();
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_INCREMENT_BRIGHTNESS_GREEN: // increment green brightness
{
display_increment_color_green ();
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_DECREMENT_BRIGHTNESS_BLUE: // decrement blue brightness
{
display_decrement_color_blue ();
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_INCREMENT_BRIGHTNESS_BLUE: // increment blue brightness
{
display_increment_color_blue ();
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_AUTO_BRIGHTNESS_CONTROL: // toggle auto brightness
{
auto_brightness = ! auto_brightness;
last_ldr_value = 0xFF;
display_set_automatic_brightness_control (auto_brightness);
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_DECREMENT_BRIGHTNESS: // decrement brightness
{
if (auto_brightness)
{
auto_brightness = 0;
last_ldr_value = 0xFF;
display_set_automatic_brightness_control (auto_brightness);
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
}
display_decrement_brightness ();
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_INCREMENT_BRIGHTNESS: // increment brightness
{
if (auto_brightness)
{
auto_brightness = 0;
last_ldr_value = 0xFF;
display_set_automatic_brightness_control (auto_brightness);
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
}
display_increment_brightness ();
display_flag = DISPLAY_FLAG_UPDATE_NO_ANIMATION;
break;
}
case REMOTE_IR_CMD_GET_TEMPERATURE: // get temperature
{
show_temperature = 1;
break;
}
default:
{
break;
}
}
#endif // SAVE_RAM == 0
if (time_changed)
{
if (rtc_is_up)
{
tm.tm_hour = hour;
tm.tm_min = minute;
tm.tm_sec = second;
rtc_set_date_time (&tm);
}
time_changed = 0;
}
}
return 0;
}
int main(void)
{
uint8_t buf[HID_OUT_BUFFER_SIZE-1], RepeatCounter = 0;
IRMP_DATA myIRData;
int8_t ret;
/* first wakeup slot empty? */
uint8_t learn_wakeup = eeprom_restore(buf, (MACRO_DEPTH + 1) * SIZEOF_IR/2 * MACRO_SLOTS);
USB_HID_Init();
LED_Switch_init();
IRMP_Init();
irsnd_init();
FLASH_Unlock();
EE_Init();
Systick_Init();
while (1) {
if (!AlarmValue)
Wakeup();
wakeup_reset();
/* test if USB is connected to PC and command is received */
if (USB_HID_GetStatus() == USB_HID_CONNECTED && USB_HID_ReceiveData(buf) == RX_READY && buf[0] == STAT_CMD) {
switch ((enum access) buf[1]) {
case ACC_GET:
ret = get_handler(buf);
break;
case ACC_SET:
ret = set_handler(buf);
break;
case ACC_RESET:
ret = reset_handler(buf);
break;
default:
ret = -1;
}
if (ret == -1) {
buf[0] = STAT_FAILURE;
ret = 3;
} else {
buf[0] = STAT_SUCCESS;
}
/* send configuration data */
USB_HID_SendData(REPORT_ID_CONFIG, buf, ret);
toggle_LED();
}
/* poll IR-data */
if (irmp_get_data(&myIRData)) {
if (learn_wakeup) {
/* store received wakeup IRData in first wakeup slot */
eeprom_store((MACRO_DEPTH + 1) * SIZEOF_IR/2 * MACRO_SLOTS, (uint8_t *) &myIRData);
learn_wakeup = 0;
}
if (!(myIRData.flags)) {
RepeatCounter = 0;
} else {
RepeatCounter++;
}
if (RepeatCounter == 0 || RepeatCounter >= MIN_REPEATS) {
toggle_LED();
/* if macros are sent already, while the trigger IR data are still repeated,
* the receiving device may crash */
check_macros(&myIRData);
check_wakeups(&myIRData);
}
/* send IR-data */
memcpy(buf, &myIRData, sizeof(myIRData));
USB_HID_SendData(REPORT_ID_IR, buf, sizeof(myIRData));
}
}
}
int main( void )
{
wdt_disable();
jtag_disable();
rs232_init( 9600, 0 );
spi_init( SPI_HALFSPEED | SPI_EIGHTHSPEED );
spi_idetrol_slave_init( &player );
irmp_init();
timer1_init();
timer2_init();
stdin = stdout = &rs232inout;
sei();
printf_P( PSTR("\nCDTrol "__DATE__"\n") );
if( !ata_init() )
{
printf_P( PSTR("ATA Initialization failed\n") );
_delay_ms(1000);
return 1;
}
if( !atapi_init() )
{
printf_P( PSTR("ATAPI Initialization failed\n") );
_delay_ms(1000);
return 1;
}
if( !atapiplayer_init( &player ) )
{
printf_P( PSTR("ATAPIPlayer Initialization failed\n") );
_delay_ms(1000);
return 1;
}
while( true )
{
spi_idetrol_slave_update();
if( updateFlag )
{
atapiplayer_update( &player );
updateFlag = 0;
}
if( irmp_get_data( &irmp_data ) )
{
if( ! (irmp_data.flags & IRMP_FLAG_REPETITION) )
{
printf_P( PSTR("\nIRMP: protocol \"%S\", address %d, command %d\n"), (PGM_P)pgm_read_word(&(irmp_protocol_strings[irmp_data.protocol])), irmp_data.address, irmp_data.command );
switch( irmp_data.command )
{
case 53:
printf_P( PSTR("\nPlay\n") );
atapiplayer_play( &player );
break;
case 48:
printf_P( PSTR("\nPause\n") );
atapiplayer_pause( &player );
break;
case 54:
printf_P( PSTR("\nStop\n") );
atapiplayer_stop( &player );
break;
case 36:
printf_P( PSTR("\nPrevious\n") );
atapiplayer_previous( &player );
break;
case 30:
printf_P( PSTR("\nNext\n") );
atapiplayer_next( &player );
break;
case 55:
printf_P( PSTR("\nLoad/Eject\n") );
atapiplayer_loadEject( &player );
break;
}
}
switch( irmp_data.command )
{
case 52:
printf_P( PSTR("\nFastForward\n") );
atapiplayer_forward( &player );
break;
case 50:
printf_P( PSTR("\nFastRewind\n") );
atapiplayer_rewind( &player );
break;
case 59:
atapi_printError();
break;
}
}
}
return 0;
}
int main (void)
{
IRMP_DATA irmp_data;
// Setup everything
irmp_init();
timer_init();
pwm_init();
// enable interrupts
sei();
// Main Loop
for(;;)
{
if (!irmp_get_data(&irmp_data)) continue;
//Repeating Commands
if (!(irmp_data.flags&&IRMP_FLAG_REPETITION))
{
switch (irmp_data.command)
{
case 0x0B: //flash
led.steps=0;
if (led.mode == FLASH)
{
led.mode=FIXED;
led.hsv.val=255;
led.steps=1;
}
else
{
led.mode = FLASH;
led.speed = 100;
led.steps=1;
}
break;
case 0x0F: //strobe
led.steps=0;
if (led.mode == STROBE)
{
led.mode=FIXED;
led.hsv.val=255;
}
else
{
led.mode = STROBE;
led.speed = 20;
led.hsv.sat=255;
led.hsv.val=255;
}
break;
case 0x13: //fade
led.steps=0;
if (led.mode == FADE)
{
led.mode=FIXED;
led.hsv.val=255;
led.speed=10;
led.steps=1;
}
else
{
led.mode = FADE;
led.speed = 10;
led.hsv.sat=255;
led.hsv.val=255;
led.steps=1;
}
break;
case 0x17: //smooth
led.steps=0;
if (led.mode == FLASH)
{
led.mode=FIXED;
led.hsv.sat=255;
led.hsv.val=255;
}
else
{
led.mode = FLASH;
led.speed = 0xFF;
}
break;
}
}
//Non-Repeating Commands
switch (irmp_data.command)
{
//Lightness
case 0x00: //lighter
if (led.hsv.val <= 245) led.hsv.val+=10;
break;
case 0x01: //darker
if (led.hsv.val > 20) led.hsv.val-=10;
break;
//Power On/Off Maybe use idle modes?!
case 0x02: //off
led.hsv.val=0;
break;
case 0x03: //on
led.hsv.val=255;
break;
//Predefined Colors
case 0x04: //R
led.mode=FIXED;
sethsv(0,255,255);
break;
case 0x05: //G
led.mode=FIXED;
sethsv(85,255,255);
break;
case 0x06: //B
led.mode=FIXED;
sethsv(170,255,255);
break;
case 0x07: //W
led.mode=FIXED;
sethsv(0,0,255);
break;
case 0x08:
led.mode=FIXED;
sethsv(42,255,255);
break;
case 0x09:
led.mode=FIXED;
sethsv(127,255,255);
break;
case 0x0A:
led.mode=FIXED;
sethsv(212,255,255);
break;
case 0x0C: // Speed+
if (led.speed > 1) --led.speed;
break;
case 0x0D:
led.hsv.hue+=2;
break;
case 0x0E:
if (led.hsv.sat<250) led.hsv.sat+=5;
break;
case 0x10: // Speed-
if (led.speed < 255) ++led.speed;
break;
case 0x11: //hue-
led.hsv.hue-=2;
break;
case 0x12:
if (led.hsv.sat>5) led.hsv.sat-=5;
break;
case 0x14:
break;
case 0x15:
break;
case 0x16:
break;
}
}
}
/*****************************************
* MAIN
*****************************************/
int main(void)
{
SystemInit();
UB_Systick_Init();
// Init of UB libs
UB_TIMER2_Init_FRQ( 100 );
UB_TIMER5_Init_FRQ( 10000 );
UB_Led_Init();
UB_DigIn_Init();
UB_DigOut_Init();
UB_ADC1_SINGLE_Init();
UB_RTC_Init();
UB_RTC_SetWakeUpInterrupt(RTC_WAKEUP_5s);
// Note: code needs to be reconfigured for Nucleo Board (Frequency of 96 MHz should also be checked)
UB_WS2812_Init();
WC_DisableAllElements();
WC_SetColor( WS2812_HSV_COL_WHITE );
WC_SetBrightness( 10 );
WC_SetElement(WC_ELEMENT_ES, 1);
WC_Refresh();
UB_Uart_Init();
esp8266_init();
UB_Systick_Pause_ms(1000);
// Indicate successful booting
UB_Led_On( LED_GREEN );
UB_Systick_Pause_s(1);
UB_Led_Off( LED_GREEN );
// Start timers and therefore cyclic actions in the call backs below
UB_TIMER2_Start();
UB_TIMER5_Start();
UB_DigOut_Lo(DOUT_PB7); // Set ground for LDR
UB_DigOut_Lo(DOUT_PB9); // Set PC9 low to start DCF module
while(1) {
// Handle word matrix refreshes
if ( gWcIsToBeRefreshed == Bit_SET ){
WC_Refresh();
gWcIsToBeRefreshed = Bit_RESET;
}
// Check if update of time is necessary
#ifndef DISABLE_DCF
if ( DcfTimeWasSetRecently() == Bit_RESET )
gDcfRxInProgress = Bit_SET;
#endif
// Handle IR remote
if ( irmp_get_data( &irData ) )
ProcessIrDataPacket( irData );
// Read Ambient brightness and set LED brightness
if ( gDcfRxInProgress == Bit_RESET ){
ambientBrightnessCurrent = SlidingAverageOnLastValues( UB_ADC1_SINGLE_Read( ADC_PA1 ) );
int brightnessToSet = 100.0 * GetBrightnessFactor( ambientBrightnessPoints, ambientBrightnessLedDimmingFactors, ambientBrightnessCurrent );
if ( brightnessToSet < LED_BRIGHTNESS_OFF_THRESHOLD )
WC_SetColor( WS2812_HSV_COL_OFF );
else
WC_SetBrightness( brightnessToSet );
gWcIsToBeRefreshed = Bit_SET;
}
// Handle ESP8266 receive
esp8266_handle_receive();
if( esp8266_request_time_from_google() == 1 ) {
UB_RTC = Esp8266_curTime;
UB_RTC_SetClock( RTC_DEC );
SetWordMatrix( UB_RTC_GetClock(RTC_DEC) );
gWcIsToBeRefreshed = Bit_SET;
}
}
}
int main(void) {
uchar i;
int intro = 1;
static char reciveErrorCount = 0;
static char carrierErrorCount = 0;
wdt_enable(WDTO_1S);
/* Even if you don't use the watchdog, turn it off here. On newer devices,
* the status of the watchdog (on/off, period) is PRESERVED OVER RESET!
* RESET status: all port bits are inputs without pull-up.
* That's the way we need D+ and D-. Therefore we don't need any
* additional hardware initialization.
*/
usbInit();
usbDeviceDisconnect(); /* enforce re-enumeration, do this while interrupts are disabled! */
i = 0;
while (--i) { // fake USB disconnect for > 250 ms
wdt_reset();
_delay_ms(1);
}
usbDeviceConnect();
//sei();
//Ports initialization and other piperials
LCD_Initalize();
LCD_Clear();
/* About project screen */
//LCD_GoTo(center("SMiW 2011/2012"), 0);
//LCD_WriteText("SMiW 2011/2012");
//LCD_GoTo(center("Marcin Jabrzyk"), 2);
//LCD_WriteText("Marcin Jabrzyk");
irmp_init(); //IR libary
timer_init(); //IR timmer and ADC starter
adc_init(); //ADC configuration
cli();
intro = 0;
if (RFM70_Initialize(0, (uint8_t*) "Smiw2")) {
LCD_GoTo(center("Init RFM70"), 2);
LCD_WriteText("Init RFM70");
_delay_ms(100);
} else {
LCD_GoTo(center("ERR init RFM70"), 1);
LCD_WriteText("ERR init RFM70");
}
if (RFM70_Present()) {
LCD_GoTo(center("RFM70 present"), 3);
LCD_WriteText("RFM70 present");
} else {
LCD_GoTo(center("RFM70 not present"), 3);
LCD_WriteText("RFM70 not present");
}
sei();
for (;;) { /* main event loop */
wdt_reset();
usbPoll();
if (RFM70_Present()) {
sprintf(screenDebug[0], screenDebugTemplate[0], "OK");
} else {
sprintf(screenDebug[0], screenDebugTemplate[0], "ERROR");
}
if (Carrier_Detected()) {
sprintf(screenDebug[1], screenDebugTemplate[1], "OK");
carrierErrorCount = 0;
} else {
carrierErrorCount++;
}
if (carrierErrorCount > 50) {
sprintf(screenDebug[1], screenDebugTemplate[1], "NONE");
}
char* _tempGrzejnik;
if (Packet_Received()) {
sprintf(screenDebug[2], screenDebugTemplate[2], "OK");
Receive_Packet(message);
//if from grzejnik starts with "a" else from piec
_tempGrzejnik = strchr(message, 'a');
if (_tempGrzejnik != NULL ) {
strncpy(tempFromGrzejnik, _tempGrzejnik, 4);
sprintf(screenCenter[2], screenCenterTemplate[2],
_tempGrzejnik);
} else {
strncpy(tempFromPiec, message, 4);
sprintf(screenCenter[1], screenCenterTemplate[1], message);
}
reciveErrorCount = 0;
} else {
reciveErrorCount++;
}
if (reciveErrorCount > 90) {
sprintf(screenDebug[2], screenDebugTemplate[2], "WAIT");
}
if (irmp_get_data(&irmp_data)) { // When IR decodes a new key presed.
lastKey = irmp_data.command; //Save the key
itoa(irmp_data.command, lastKeyStr, 10); //Convert it to string
sprintf(screenCenter[3], screenCenterTemplate[3], lastKeyStr);
isChanged = 1;
intro = 0;
}
if (intro == 0) {
switch (lastKey) { //Change the view
case 69:
printScreenWithCenter(screenLeft);
break; //CH-
case 70:
printScreen(screenCenter);
break; //CH
case 71:
printScreenWithCenter(screenRight);
break; //CH+
case 82:
printScreen(screenDebug);
break;
default:
printScreen(screenCenter);
break; //Any other key
}
}
usbPoll();
}
return 0;
}
static void led3_thread_entry(void* parameter)
{
rt_kprintf ( "\r\n led3_thread_entry!!\r\n");
irmp_init(); // initialize irmp
irsnd_init();
timer2_init(); // initialize timer2
rt_kprintf ( "\r\n 红外收发系统初始化完成!\r\n");
for (;;)
{
char *str;
// rt_kprintf ( "IRMP is going!!!\r\n");
rt_thread_delay(1);
if(RT_EOK== (rt_mb_recv(&dfs_mb,(rt_uint32_t*)&str,RT_WAITING_NO)))
{rt_kprintf("接收到控制邮件，数据为 %s",str);
// TIM_Cmd(TIM2, ENABLE);
if(strcmp(str,"getremote")==0)
hot_remote_state=1;
if(strcmp(str,"sendremote")==0)
hot_remote_send=1;
}
if (irmp_get_data (&irmp_data))
{
rt_kprintf("接收红外信号编码方式: %s",irmp_protocol_names[irmp_data.protocol]);
rt_kprintf(" 编码地址: 0x%2X",irmp_data.address);
rt_kprintf(" 命令: 0x%2X",irmp_data.command);
rt_kprintf(" 标志位: 0x%2X\r\n",irmp_data.flags );
if(1==hot_remote_state)
{
hot_remote_state=2;
irmp_data1=irmp_data;
rt_mb_send(&mb,(rt_uint32_t)get_remot1_mp3);//发送邮件
rt_kprintf("红外接收完成第一次\n" );
}
else if(2==hot_remote_state)
{
if(irmp_data1.command==irmp_data.command)
{
rt_kprintf("红外接收完成第二次,验证通过\n" );
rt_mb_send(&mb,(rt_uint32_t)get_remot2_mp3);//发送邮件
hot_remote_state=0;
// TIM_Cmd(TIM2, DISABLE);
}
else {
rt_kprintf("红外接收完成第二次,验证不通过，再次接收红外数据\n" );
rt_mb_send(&mb,(rt_uint32_t)check_fail_mp3);//发送邮件
hot_remote_state=1;
}
}
}
if(hot_remote_send)
{
hot_remote_send=0;
// TIM_Cmd(TIM2, ENABLE);
/* irmp_data.protocol = IRMP_SAMSUNG32_PROTOCOL; // use NEC protocol
irmp_data.address = 0x0e0e; // set address to 0x00FF
irmp_data.command = 0xf30c; // set command to 0x0001
irmp_data.flags = 0; // don't repeat frame*/
irsnd_send_data (&irmp_data, TRUE); // send frame, wait for completion // don't repeat frame
rt_mb_send(&mb,(rt_uint32_t)sen_remot_mp3);
rt_kprintf("发送红外数据完成\n");
rt_kprintf("发射红外信号编码方式: %s",irmp_protocol_names[irmp_data.protocol]);
rt_kprintf(" 编码地址: 0x%2X",irmp_data.address);
rt_kprintf(" 命令: 0x%2X",irmp_data.command);
rt_kprintf(" 标志位: 0x%2X\r\n",irmp_data.flags );
// TIM_Cmd(TIM2, DISABLE);
}
}
}
int main(void)
{
uint8_t buf[HID_OUT_BUFFER_SIZE-1];
IRMP_DATA myIRData;
int8_t ret;
LED_Switch_init();
Systick_Init();
USB_Reset();
USB_HID_Init();
USB_DISC_release();
IRMP_Init();
irsnd_init();
FLASH_Unlock();
EE_Init();
irmp_set_callback_ptr (led_callback);
while (1) {
if (!AlarmValue)
Wakeup();
if (!send_ir_on_delay)
send_magic();
wakeup_reset();
/* test if USB is connected to PC, sendtransfer is complete and configuration command is received */
if (USB_HID_GetStatus() == CONFIGURED && PrevXferComplete && USB_HID_ReceiveData(buf) == RX_READY && buf[0] == STAT_CMD) {
switch ((enum access) buf[1]) {
case ACC_GET:
ret = get_handler(buf);
break;
case ACC_SET:
ret = set_handler(buf);
break;
case ACC_RESET:
ret = reset_handler(buf);
break;
default:
ret = -1;
}
if (ret == -1) {
buf[0] = STAT_FAILURE;
ret = 3;
} else {
buf[0] = STAT_SUCCESS;
}
/* send configuration data */
USB_HID_SendData(REPORT_ID_CONFIG, buf, ret);
blink_LED();
if(Reboot)
reboot();
}
/* poll IR-data */
if (irmp_get_data(&myIRData)) {
myIRData.flags = myIRData.flags & IRMP_FLAG_REPETITION;
if (!(myIRData.flags)) {
store_wakeup(&myIRData);
check_macros(&myIRData);
check_wakeups(&myIRData);
check_resets(&myIRData);
check_reboot(&myIRData);
}
/* send IR-data */
USB_HID_SendData(REPORT_ID_IR, (uint8_t *) &myIRData, sizeof(myIRData));
}
}
}
void checkIR(IRMP_DATA *irmp_data) {
if (irmp_get_data(irmp_data)) {
if (pwm_status == POWER_OFF && irmp_data->command != 1)
return;
if (!(irmp_data->flags & IRMP_FLAG_REPETITION)) {
switch (irmp_data->command) {
case (1):
if (pwm_status == POWER_ON) {
pwm_disable_all();
off(DEBUGLED);
} else {
pwm_enable_all();
on(DEBUGLED);
}
action = NONE;
break;
case (30):
change_white(1);
break;
case (36):
change_white(-1);
break;
case (4):
change_white(-255);
break;
case (14):
rgb_color.r=0; rgb_color.g=0; rgb_color.b=0;
hsv_color = RgbToHsv(&rgb_color);
update_color();
break;
case (40):
change_hue(5.);
action = NONE;
break;
case (41):
change_hue(-5.);
action = NONE;
break;
case (44):
change_saturation(0.1);
action = NONE;
break;
case (45):
change_saturation(-0.1);
action = NONE;
break;
case (9):
change_value(0.1);
action = NONE;
break;
case (5):
change_value(-0.1);
action = NONE;
break;
case (7):
duration += 10;
break;
case (8):
duration -= 10;
break;
case (16):
colors_gen(RED, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (17):
colors_gen(GREEN, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (18):
colors_gen(BLUE, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (19):
colors_gen(CYAN, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (20):
colors_gen(MAGENTA, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (21):
colors_gen(YELLOW, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (22):
colors_gen(WHITE, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (23):
colors_gen(BROWN, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (24):
colors_gen(RANDOM, &rgb_color, &hsv_color);
update_color();
action = NONE;
break;
case (15):
action = (action == HUE_FADE) ? NONE : HUE_FADE;
break;
default:
break;
}
} else {
switch (irmp_data->command) { // if you press the button longer
case (30):
change_white(5);
break;
case (36):
change_white(-5);
break;
case (40):
change_hue(0.5);
break;
case (41):
change_hue(-0.5);
break;
case (44):
change_saturation(0.01);
break;
case (45):
change_saturation(-0.01);
break;
case (9):
change_value(0.01);
break;
case (5):
change_value(-0.01);
break;
case (7):
duration += 5;
break;
case (8):
duration -= 5;
break;
default:
break;
}
}
} //end remote switch
switch (action) {
case (HUE_FADE):
if (duration <= 0)
duration = 0;
if ((millis - last_millis) > duration) {
change_hue(1.);
last_millis = millis;
}
break;
default:
break;
} // action switch
}
