IX_STATUS
ixEthAccCodeletSwBridge(IxEthAccPortId inPort,
IxEthAccPortId outPort)
{
IX_ETHACC_IS_CODELET_INITIALISED();
if (!ixEthAccCodeletHardwareExists[inPort]
|| !ixEthAccCodeletHardwareExists[outPort])
{
/* Bridge operation only works
* when two Eth NPEs are available
*
* B0 silicon may have only one eth coprocessor
* A0 silicon has two Eth coprocessors
*/
printf("\n*********************************************************************\n");
printf ("Bridge operation needs two Eth coprocessors.\n");
printf ("Underlying silicon has only one Eth coprocessor!\n");
printf("\n*********************************************************************\n");
return IX_FAIL ;
}
if ( ixEthAccCodeletSwBridgeStart(inPort,
outPort)
!= IX_SUCCESS)
{
printf("CodeletMain: Failed to start the Bridge Operation\n");
return (IX_FAIL);
}
printf("\n");
printf("Bridge Operation started. Begin sending packets from\n");
printf("external source between port %u and port %u\n",
(UINT32)inPort,
(UINT32)outPort);
printf("\n");
if(ixEthAccCodeletLoop()
!= IX_SUCCESS)
{
return (IX_FAIL);
}
if ( ixEthAccCodeletSwBridgeStop(inPort,
outPort)
!= IX_SUCCESS)
{
printf("CodeletMain: Failed to stop the Bridge Operation\n");
return (IX_FAIL);
}
/* wait for pending traffic to be completely received */
if (ixEthAccCodeletRecoverBuffers()
!= IX_SUCCESS)
{
printf("Warning : Not all buffers are accounted for!\n");
}
return (IX_SUCCESS);
}
IX_STATUS
ixEthAccCodeletTxGenRxSinkLoopback(IxEthAccPortId inPort,
IxEthAccPortId outPort)
{
IX_ETHACC_IS_CODELET_INITIALISED();
#if defined(__linux) && (IX_ETH_CODELET_QMGR_DISPATCH_MODE==TRUE)
printf("\n*********************************************************************\n");
printf("WARNING: This operation uses too much CPU time in interrupt mode to display\n");
printf(" any counters. Please recompile the codelet for polled mode when\n");
printf(" using this operation\n\n");
printf("Polled mode: set IX_ETH_CODELET_QMGR_DISPATCH_MODE to FALSE in IxEthAccCodelet_p.h\n");
printf("*********************************************************************\n\n");
#endif
/* This configuration requires two NPE be available to use */
if ( !((ixEthAccCodeletHardwareExists[inPort]) &&
(ixEthAccCodeletHardwareExists[outPort]) ))
{
printf("CodeletMain: Failed to start Tx Gen RX Sink Operation as two NPEs are needed\n");
return (IX_FAIL);
}
if (ixEthAccCodeletTxGenRxSinkLoopbackStart(outPort, inPort)
!= IX_ETH_ACC_SUCCESS)
{
printf("CodeletMain: Failed to start the Tx Gen RX Sink Operation\n");
return IX_FAIL;
}
printf("\n");
printf("TxGen RxSink successfully started.\n");
printf("Begin sending packets from external source\n");
printf("Or use a crossover cable between port %d and port %d\n",inPort,outPort);
printf("\n");
/* wait for user input */
if (ixEthAccCodeletLoop() != IX_SUCCESS)
{
return (IX_FAIL);
}
/* stop traffic, recover buffers */
if (ixEthAccCodeletTxGenRxSinkLoopbackStop(outPort, inPort)
!= IX_ETH_ACC_SUCCESS)
{
printf("CodeletMain: Failed to stop the Tx Gen RX Sink Operation\n");
return (IX_FAIL);
}
/* wait for pending traffic to be completely received */
if (ixEthAccCodeletRecoverBuffers()
!= IX_SUCCESS)
{
printf("Warning : Not all buffers are accounted for!\n");
}
return (IX_SUCCESS);
}
IX_STATUS
ixEthAccCodeletRxSink(void)
{
IxEthAccPortId portId;
IX_ETHACC_IS_CODELET_INITIALISED();
/* Configure all available ports and start traffic */
for (portId = 0; portId < IX_ETHACC_CODELET_MAX_PORT; portId++)
{
if (ixEthAccCodeletHardwareExists[portId])
{
if (ixEthAccCodeletRxSinkStart(portId)
!= IX_ETH_ACC_SUCCESS)
{
printf("CodeletMain: Failed to configure the RX Sink Operation Port %u\n",
(UINT32)portId);
return IX_FAIL;
}
}
}
printf("\n");
printf("Rx Sink Operation started.\n");
printf("Begin sending packets in from external source\n");
printf("\n");
/* wait for user input */
if(ixEthAccCodeletLoop() != IX_SUCCESS)
{
printf("CodeletMain: Failed to get User Input (should never happen)");
return (IX_FAIL);
}
/* Stop traffic and unconfigure all available ports */
for (portId = 0; portId < IX_ETHACC_CODELET_MAX_PORT; portId++)
{
if (ixEthAccCodeletHardwareExists[portId])
{
if (ixEthAccCodeletRxSinkStop(portId)
!= IX_ETH_ACC_SUCCESS)
{
printf("CodeletMain: Failed to unconfigure the RX Sink Operation Port %u\n",
(UINT32)portId);
return IX_FAIL;
}
}
}
/* wait for pending traffic to be completely received */
if (ixEthAccCodeletRecoverBuffers()
!= IX_SUCCESS)
{
printf("CodeletMain: Warning! Not all buffers are accounted for\n");
}
return (IX_SUCCESS);
}
/*
* Function definition: ixEthAccCodeletDBLearningRun()
*
* Run ethDB demo for all ports passed as parameters
*/
IX_STATUS
ixEthAccCodeletDBLearningRun(BOOL validPorts[])
{
IxEthAccPortId portId;
IxEthDBPortId portPtr;
IxEthDBMacAddr staticMacAddress[IX_ETHACC_CODELET_MAX_PORT] =
{{{0,1,2,3,4,5}}, {{6,7,8,9,0,1}}};
IxEthDBMacAddr dynamMacAddress[IX_ETHACC_CODELET_MAX_PORT] =
{{{0xa,0xb,0xc,0xd,0xe,0xf}}, {{0x0,0xb,0x3,0xc,0x4,0xd}}};
if (ixEthAccCodeletDBMaintenanceStart()
!= IX_SUCCESS)
{
printf("DbLearning: Error spawning DB maintenance task\n");
return (IX_FAIL);
}
/* configure all existing ports */
for (portId = 0; portId < IX_ETHACC_CODELET_MAX_PORT; portId++)
{
if (validPorts[portId])
{
/* Configure the port */
printf("Configuring the port...\n");
if (ixEthAccCodeletPortConfigure(portId,
ixEthAccCodeletMemPoolFreeRxCB,
(IxEthAccPortMultiBufferRxCallback) NULL,
ixEthAccCodeletMemPoolFreeTxCB,
portId)
!= IX_ETH_ACC_SUCCESS)
{
printf("DbLearning: Failed to configure the port %u\n",
(UINT32)portId);
return IX_FAIL;
}
/* Enable the port */
printf("Enabling the port...\n");
if(ixEthAccPortEnable(portId) != IX_ETH_ACC_SUCCESS)
{
printf("DbLearning: Error enabling port %u\n",
(UINT32)portId);
return (IX_FAIL);
}
/* Add some static entries */
printf("Adding static entries...\n");
if (ixEthDBFilteringStaticEntryProvision(portId,
&staticMacAddress[portId])
!= IX_ETH_DB_SUCCESS)
{
printf("DbLearning: Failed to add static MAC to port %u\n",
(UINT32)portId);
return (IX_FAIL);
}
ixOsalSleep(100);
/* Verify that the address has successfully been added */
if (ixEthDBFilteringDatabaseSearch(&portPtr,
&staticMacAddress[portId])
== IX_ETH_DB_NO_SUCH_ADDR)
{
printf("DbLearning: Static MAC address not found in Database\n");
return (IX_FAIL);
}
/* Add some dynamic entries */
printf("Adding dynamic entries...\n");
if (ixEthDBFilteringDynamicEntryProvision(portId,
&dynamMacAddress[portId])
!= IX_ETH_DB_SUCCESS)
{
printf("DbLearning: Failed to add dynamic MAC to port %u\n",
(UINT32)portId);
}
printf("Enabling aging...\n");
if (ixEthDBPortAgingEnable(portId) != IX_ETH_DB_SUCCESS)
{
printf("DbLearning: Failed to enable aging for port %u\n",
(UINT32)portId);
return (IX_FAIL);
}
}
}
ixEthDBFilteringDatabaseShowAll();
/* Wait 4 minutes over aging time (for safety) and verify that the
* dynamic entries have been removed
*/
printf("Aging entries.\nWaiting for %d minutes...\n",
IX_ETH_DB_LEARNING_ENTRY_AGE_TIME / 60 + 3);
ixOsalSleep((IX_ETH_DB_LEARNING_ENTRY_AGE_TIME + 180) * 1000);
ixEthDBFilteringDatabaseShowAll();
for (portId = 0; portId < IX_ETHACC_CODELET_MAX_PORT; portId++)
{
if (validPorts[portId])
{
if(ixEthDBFilteringEntryDelete(&staticMacAddress[portId])
!= IX_ETH_DB_SUCCESS)
{
printf("DbLearning: Failed to remove static MAC on port %u\n",
(UINT32)portId);
}
/* Disable ports */
if(ixEthAccPortDisable(portId) != IX_ETH_ACC_SUCCESS)
{
printf("DbLearning: Error disabling port %u\n",
(UINT32)portId);
return (IX_FAIL);
}
}
}
/* wait for pending traffic to be completely received */
if (ixEthAccCodeletRecoverBuffers()
!= IX_SUCCESS)
{
printf("Warning : Not all buffers are accounted for!\n");
}
return (IX_SUCCESS);
}
/*
* Function definition: ixEthAccCodeletPhyLoopback()
*
* See header file for documentation.
*/
IX_STATUS
ixEthAccCodeletPhyLoopback(void)
{
IxEthAccPortId portId;
IX_ETHACC_IS_CODELET_INITIALISED();
#if defined(__linux) && (IX_ETH_CODELET_QMGR_DISPATCH_MODE==TRUE)
printf("\n*********************************************************************\n");
printf("WARNING: This operation uses too much CPU time in interrupt mode to display\n");
printf(" any counters. Please recompile the codelet for polled mode when\n");
printf(" using this operation.\n\n");
printf("Polled mode: set IX_ETH_CODELET_QMGR_DISPATCH_MODE to FALSE in IxEthAccCodelet_p.h\n");
printf("*********************************************************************\n\n");
#endif /* Configure all available ports */
for (portId = 0; portId < IX_ETHACC_CODELET_MAX_PORT; portId++)
{
if (ixEthAccCodeletHardwareExists[portId])
{
if (ixEthAccCodeletPhyLoopbackStart(portId)
!= IX_ETH_ACC_SUCCESS)
{
printf("CodeletMain: Failed to configure the PHY Loopback Operation on Port %u\n",
(UINT32)portId);
return IX_FAIL;
}
}
}
printf("\n");
printf("PHY Loopback operation successfully started\n");
printf("\n");
/* wait for user input */
if(ixEthAccCodeletLoop() != IX_SUCCESS)
{
return (IX_FAIL);
}
/* Stop traffic and unconfigure all available ports */
for (portId = 0; portId < IX_ETHACC_CODELET_MAX_PORT; portId++)
{
if (ixEthAccCodeletHardwareExists[portId])
{
if (ixEthAccCodeletPhyLoopbackStop(portId)
!= IX_ETH_ACC_SUCCESS)
{
printf("CodeletMain: Failed to unconfigure the PHY Loopback Operation on Port %u\n",
(UINT32)portId);
return IX_FAIL;
}
}
}
/* wait for pending traffic to be completely received */
if (ixEthAccCodeletRecoverBuffers()
!= IX_SUCCESS)
{
printf("Warning: Not all buffers are accounted for!\n");
}
return (IX_SUCCESS);
}