/**
* @brief enables or disables a port capability
*
* @param portID ID of the port
* @param feature feature to enable or disable
* @param enabled TRUE to enable the selected feature or FALSE to disable it
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.
*
* @return IX_ETH_DB_SUCCESS if the operation completed
* successfully or an appropriate error message otherwise
*/
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enable)
{
PortInfo *portInfo;
IxEthDBPriorityTable defaultPriorityTable;
IxEthDBVlanSet vlanSet;
IxEthDBStatus status = IX_ETH_DB_SUCCESS;
BOOL portEnabled;
IX_ETH_DB_CHECK_PORT_INITIALIZED(portID);
portInfo = &ixEthDBPortInfo[portID];
portEnabled = portInfo->enabled;
/* check that only one feature is selected */
if (!ixEthDBCheckSingleBitValue(feature))
{
return IX_ETH_DB_FEATURE_UNAVAILABLE;
}
/* port capable of this feature? */
if ((portInfo->featureCapability & feature) == 0)
{
return IX_ETH_DB_FEATURE_UNAVAILABLE;
}
/* mutual exclusion between learning and WiFi header conversion */
if (enable && ((feature | portInfo->featureStatus) & (IX_ETH_DB_FILTERING | IX_ETH_DB_WIFI_HEADER_CONVERSION))
== (IX_ETH_DB_FILTERING | IX_ETH_DB_WIFI_HEADER_CONVERSION))
{
return IX_ETH_DB_NO_PERMISSION;
}
/* learning must be enabled before filtering */
if (enable && (feature == IX_ETH_DB_FILTERING) && ((portInfo->featureStatus & IX_ETH_DB_LEARNING) == 0))
{
return IX_ETH_DB_NO_PERMISSION;
}
/* filtering must be disabled before learning */
if (!enable && (feature == IX_ETH_DB_LEARNING) && ((portInfo->featureStatus & IX_ETH_DB_FILTERING) != 0))
{
return IX_ETH_DB_NO_PERMISSION;
}
/* redundant enabling or disabling */
if ((!enable && ((portInfo->featureStatus & feature) == 0))
|| (enable && ((portInfo->featureStatus & feature) != 0)))
{
/* do nothing */
return IX_ETH_DB_SUCCESS;
}
/* force port enabled */
portInfo->enabled = TRUE;
if (enable)
{
/* turn on enable bit */
portInfo->featureStatus |= feature;
#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */
/* if this is VLAN/QoS set the default priority table */
if (feature == IX_ETH_DB_VLAN_QOS)
{
/* turn on VLAN/QoS (most permissive mode):
- set default 802.1Q priority mapping table, in accordance to the
availability of traffic classes
- set the acceptable frame filter to accept all
- set the Ingress tagging mode to pass-through
- set full VLAN membership list
- set full TTI table
- set the default 802.1Q tag to 0 (VLAN ID 0, Pri 0, CFI 0)
- enable TPID port extraction
*/
portInfo->ixEthDBTrafficClassCount = portInfo->ixEthDBTrafficClassAvailable;
/* set default 802.1Q priority mapping table - note that C indexing starts from 0, so we substract 1 here */
memcpy (defaultPriorityTable,
(const void *) ixEthIEEE802_1QUserPriorityToTrafficClassMapping[portInfo->ixEthDBTrafficClassCount - 1],
sizeof (defaultPriorityTable));
/* update priority mapping and AQM queue assignments */
status = ixEthDBPriorityMappingTableSet(portID, defaultPriorityTable);
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBAcceptableFrameTypeSet(portID, IX_ETH_DB_ACCEPT_ALL_FRAMES);
}
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBIngressVlanTaggingEnabledSet(portID, IX_ETH_DB_PASS_THROUGH);
}
/* set membership and TTI tables */
memset (vlanSet, 0xFF, sizeof (vlanSet));
if (status == IX_ETH_DB_SUCCESS)
{
/* use the internal function to bypass PVID check */
status = ixEthDBPortVlanTableSet(portID, portInfo->vlanMembership, vlanSet);
}
if (status == IX_ETH_DB_SUCCESS)
{
/* use the internal function to bypass PVID check */
status = ixEthDBPortVlanTableSet(portID, portInfo->transmitTaggingInfo, vlanSet);
}
/* reset the PVID */
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBPortVlanTagSet(portID, 0);
}
/* enable TPID port extraction */
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBVlanPortExtractionEnable(portID, TRUE);
}
}
else if (feature == IX_ETH_DB_FIREWALL)
#endif
{
/* firewall starts in black-list mode unless otherwise configured before *
* note that invalid source MAC address filtering is disabled by default */
if (portInfo->firewallMode != IX_ETH_DB_FIREWALL_BLACK_LIST
&& portInfo->firewallMode != IX_ETH_DB_FIREWALL_WHITE_LIST)
{
status = ixEthDBFirewallModeSet(portID, IX_ETH_DB_FIREWALL_BLACK_LIST);
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBFirewallInvalidAddressFilterEnable(portID, FALSE);
}
}
}
if (status != IX_ETH_DB_SUCCESS)
{
/* checks failed, disable */
portInfo->featureStatus &= ~feature;
}
}
else
{
/* turn off features */
if (feature == IX_ETH_DB_FIREWALL)
{
/* turning off the firewall is equivalent to:
- set to black-list mode
- clear all the entries and download the new table
- turn off the invalid source address checking
*/
status = ixEthDBDatabaseClear(portID, IX_ETH_DB_FIREWALL_RECORD);
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBFirewallModeSet(portID, IX_ETH_DB_FIREWALL_BLACK_LIST);
}
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBFirewallInvalidAddressFilterEnable(portID, FALSE);
}
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBFirewallTableDownload(portID);
}
}
else if (feature == IX_ETH_DB_WIFI_HEADER_CONVERSION)
{
/* turn off header conversion */
status = ixEthDBDatabaseClear(portID, IX_ETH_DB_WIFI_RECORD);
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBWiFiConversionTableDownload(portID);
}
}
#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */
else if (feature == IX_ETH_DB_VLAN_QOS)
{
/* turn off VLAN/QoS:
- set a priority mapping table with one traffic class
- set the acceptable frame filter to accept all
- set the Ingress tagging mode to pass-through
- clear the VLAN membership list
- clear the TTI table
- set the default 802.1Q tag to 0 (VLAN ID 0, Pri 0, CFI 0)
- disable TPID port extraction
*/
/* initialize all => traffic class 0 priority mapping table */
memset (defaultPriorityTable, 0, sizeof (defaultPriorityTable));
portInfo->ixEthDBTrafficClassCount = 1;
status = ixEthDBPriorityMappingTableSet(portID, defaultPriorityTable);
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBAcceptableFrameTypeSet(portID, IX_ETH_DB_ACCEPT_ALL_FRAMES);
}
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBIngressVlanTaggingEnabledSet(portID, IX_ETH_DB_PASS_THROUGH);
}
/* clear membership and TTI tables */
memset (vlanSet, 0, sizeof (vlanSet));
if (status == IX_ETH_DB_SUCCESS)
{
/* use the internal function to bypass PVID check */
status = ixEthDBPortVlanTableSet(portID, portInfo->vlanMembership, vlanSet);
}
if (status == IX_ETH_DB_SUCCESS)
{
/* use the internal function to bypass PVID check */
status = ixEthDBPortVlanTableSet(portID, portInfo->transmitTaggingInfo, vlanSet);
}
/* reset the PVID */
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBPortVlanTagSet(portID, 0);
}
/* disable TPID port extraction */
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBVlanPortExtractionEnable(portID, FALSE);
}
}
#endif
if (status == IX_ETH_DB_SUCCESS)
{
/* checks passed, disable */
portInfo->featureStatus &= ~feature;
}
}
/* restore port enabled state */
portInfo->enabled = portEnabled;
return status;
}
/**
* @brief Restore the states of EthDB Features
*
* @param portID ID of the port
*
* See IxEthDB.h for more details.
*/
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFeatureStatesRestore(IxEthDBPortId portID)
{
PortInfo *portInfo = &ixEthDBPortInfo[portID];
/* Check whether port if enabled */
IX_ETH_DB_CHECK_PORT_INITIALIZED(portID);
IX_ETH_DB_CHECK_PORT(portID);
/* ======================== Basic ==========================
* Set up Port MAC Address
*/
if (ixEthDBPortAddressSet(portID, &(portInfo->macAddr)) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
/*
* Set up Port Max Rx/Tx frame lengths
*/
if(ixEthDBPortFrameLengthsUpdate(portID) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
/* ======================== VLAN/QoS ==========================
* Only performs VLAN feature update if it is enabled before
*/
if ((portInfo->featureStatus & IX_ETH_DB_VLAN_QOS) != 0)
{
/* Set VLAN Rx tag mode */
if (ixEthDBIngressVlanModeUpdate(portID) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
/* Set Default Rx VID */
if (ixEthDBPortVlanTagSet(portID, portInfo->vlanTag) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
/* Set PortID extraction mode */
if (ixEthDBVlanPortExtractionEnable(portID, portInfo->portIdExtractionEnable) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
/* Set VLAN Table */
if (ixEthDBVlanTableRangeUpdate(portID) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
} /* VLAN/QoS */
/* ======================== Firewall ==========================
* Only performs Firewall feature update if it is enabled before
*/
if ((portInfo->featureStatus & IX_ETH_DB_FIREWALL) != 0)
{
if(ixEthDBFirewallTableDownload(portID) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
} /* Firewall */
/* ===================== Header Conversion ==========================
* Only performs Header Conversion feature update if it is enabled before
*/
if ((portInfo->featureStatus & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0)
{
/* Update WiFi FC & DID */
if (ixEthDBWiFiFrameControlDurationIDUpdate(portID) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
/* Update BSSID */
if (ixEthDBWiFiBSSIDSet(portID, (IxEthDBMacAddr *) portInfo->bssid) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
/* Update Header Conversion Table & AP MAC Table */
if (ixEthDBWiFiConversionTableDownload(portID) != IX_ETH_DB_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
} /* Header Conversion */
/* ====================== Learning & Filtering ==========================
* Learning & Filtering feature update is not neccessary as we can rely
* on EthNPE to learn the src address again. As for the entry added by client
* earlier, it will be lost. This is the constraint as the mechanism to retrieve
* the entry that has been added by client from NPE is not trivial.
*/
/* ============================== STP ===================================
* Only performs STP feature update if it is enabled before
*/
if ((portInfo->featureStatus & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0)
{
if (ixEthDBSpanningTreeBlockingStateSet(portID, portInfo->stpBlocked) != IX_SUCCESS)
{
return IX_ETH_DB_FAIL;
}
}
return IX_ETH_DB_SUCCESS;
}
