void task_send_data(volatile struct state_t *st)
{
if (millis() - 3000 > st->last_send_time) {
printf("WAKESEND...\n");
simrf_immediate_wakeup();
kpacket2 kp;
kp.header = 'x';
int sensor_count = 2;
ksensor s1 = {KPS_SENSOR_TEMPERATURE, st->last_temperature * 1000};
ksensor s2 = {KPS_SENSOR_RELATIVE_HUMIDITY, st->last_relative_humidity * 1000};
ksensor ch1 = {0, 0};
ksensor ch2 = {0, 0};
if (jack_connected(&jack1)) {
sensor_count++;
ch1.type = jack1.sensor_type;
ch1.value = st->jack_machine1.last_value;
}
if (jack_connected(&jack2)) {
sensor_count++;
ch2.type = jack2.sensor_type;
ch2.value = st->jack_machine2.last_value;
}
kp.ksensors[0] = s1;
kp.ksensors[1] = s2;
kp.ksensors[2] = ch1;
kp.ksensors[3] = ch2;
kp.versionCount = VERSION_COUNT(2, sensor_count);
simrf_send16(state.rf_dest_id, sizeof (kp), (void*) &kp);
st->last_send_time = millis();
}
}
/**
* NOTE this is a state machine, but it expects to run often enough for millis()
* @param machine
* @param res
*/
void jack_run_task(volatile struct jacks_machine_t *machine, struct jacks_result_t *res)
{
res->ready = false;
if (!jack_connected(machine->jack)) {
return;
}
switch (machine->step) {
case jack_machine_step_off:
// is it time to do a reading yet?
if (millis() - 3000 > machine->last_read_millis) {
printf("switching power on: channel %u\n", (unsigned int) machine->jack->val_channel);
gpio_set(machine->jack->power_port, machine->jack->power_pin);
machine->step = jack_machine_step_powered;
machine->step_entry_millis = millis();
}
break;
case jack_machine_step_powered:
// have we been powered up long enough yet?
if (millis() - machine->jack->power_on_time_millis > machine->step_entry_millis) {
printf("power stable!\n");
machine->step = jack_machine_step_ready;
// not really necessary... machine->step_entry_millis = millis();
} else {
printf(".");
}
break;
case jack_machine_step_ready:
// TODO - this should actually start a dma sequence and go to a next step
// that decimates/averages and finally returns.
// ok! do a few readings and call it good
adc_disable_scan_mode(ADC1);
adc_set_single_conversion_mode(ADC1);
adc_set_sample_time_on_all_channels(ADC1, ADC_SMPR_SMP_28DOT5CYC);
//adc_set_single_channel(ADC1, machine->jack->val_channel);
adc_set_regular_sequence(ADC1, 1, (u8*)&(machine->jack->val_channel));
adc_enable_external_trigger_regular(ADC1, ADC_CR2_EXTSEL_SWSTART);
adc_start_conversion_regular(ADC1);
printf("ok, doing reading on channel!\n");
while(!adc_eoc(ADC1)) {
;
}
res->ready = true;
res->value = adc_read_regular(ADC1);
machine->last_value = res->value;
machine->last_read_millis = millis();
gpio_clear(machine->jack->power_port, machine->jack->power_pin);
machine->step = jack_machine_step_off;
break;
}
return;
}
void xapi_psync(void *d) {
int ss =0;
#if defined (HAVE_LTCSMPTE) || defined (HAVE_LTC)
if (ltcjack_connected()) ss=3;
else
#endif
#ifdef HAVE_MIDI
if (midi_connected()) ss=2;
else
#endif
if (jack_connected()) ss=1;
remote_printf(201,"syncsource=%i",ss);
}
int main (int argc, char **argv) {
int run;
char *filename = NULL;
long frame, pframe;
program_name = argv[0];
if (argc>3) usage(1);
if (argc==3) {
filename=argv[2];
frames=atol(argv[1]);
}
else if (argc>1) filename=argv[1];
if (frames < 1 || duration < 1) usage(1);
if (!filename) usage(1);
framerate = (double) frames / (double) duration;
struct timeval tv;
fd_set set;
//TODO: trap some signals.. -> run=0;
if (jack) {
open_jack();
run= jack_connected();
} else{
#ifdef HAVE_MIDI
midi_open(midiid);
#endif
run= midi_connected();
}
printf ("jack disconnect\n");
printf ("load %s\n",filename);
printf ("window mouse off\n");
printf ("window letterbox on\n");
printf ("window fullscreen on\n");
// printf ("window resize 880x545\n");
printf ("osd font /usr/share/fonts/truetype/freefont/FreeMonoBold.ttf\n");
printf ("osd off\n");
printf ("osd smpte 100\n");
printf ("set fps %.0f\n",framerate);
pframe=-1;
while (run) {
tv.tv_sec = 0;
tv.tv_usec = 1000000/framerate;
FD_ZERO(&set);
if (readfromstdin) FD_SET(0, &set);
if (select(0+readfromstdin, &set, NULL, NULL, &tv) ) if (readfromstdin) {
size_t rv;
char buf[BUFSIZ];
if ((rv=read(0,buf,BUFSIZ)) > 0) {
if (!strncmp(buf,"exit",3)) {
printf ("quit\n");
run=0;
}else
write(1,buf,rv);
}
}
if (jack) frame= jack_poll_frame(NULL);
#ifdef HAVE_MIDI
else frame= midi_poll_frame();
#else
else exit (1);
#endif
if (pframe!=frame)
printf ("seek %li\n",frame);
pframe=frame;
fflush(stdout);
}
