void K3b::VerificationJob::start()
{
jobStarted();
d->canceled = false;
d->alreadyReadSectors = 0;
waitForMedium( d->device,
K3b::Device::STATE_COMPLETE|K3b::Device::STATE_INCOMPLETE,
K3b::Device::MEDIA_WRITABLE );
// make sure the job is initialized
if( !d->trackEntries.isEmpty() ) {
d->currentTrackEntry = d->trackEntries.begin();
}
else {
emit infoMessage( i18n( "Internal Error: Verification job improperly initialized (%1)",
i18n("no tracks added") ), MessageError );
jobFinished( false );
return;
}
emit newTask( i18n("Checking medium") );
d->mediumHasBeenReloaded = false;
connect( K3b::Device::sendCommand( K3b::Device::DeviceHandler::CommandLoad, d->device ),
SIGNAL(finished(K3b::Device::DeviceHandler*)),
this,
SLOT(slotMediaLoaded()) );
}
void K3b::Iso9660ImageWritingJob::start()
{
d->canceled = d->finished = false;
d->currentCopy = 1;
jobStarted();
if( m_simulate )
m_verifyData = false;
emit newTask( i18n("Preparing data") );
if( !QFile::exists( m_imagePath ) ) {
emit infoMessage( i18n("Could not find image %1", m_imagePath), K3b::Job::MessageError );
jobFinished( false );
return;
}
KIO::filesize_t mb = K3b::imageFilesize( m_imagePath )/1024ULL/1024ULL;
// very rough test but since most dvd images are 4,x or 8,x GB it should be enough
d->isDvdImage = ( mb > 900ULL );
startWriting();
}
bool BackupFileSystemJob::run(Report& parent)
{
bool rval = false;
Report* report = jobStarted(parent);
if (sourcePartition().fileSystem().supportBackup() == FileSystem::cmdSupportFileSystem)
rval = sourcePartition().fileSystem().backup(*report, sourceDevice(), sourcePartition().deviceNode(), fileName());
else if (sourcePartition().fileSystem().supportBackup() == FileSystem::cmdSupportCore)
{
CopySourceDevice copySource(sourceDevice(), sourcePartition().fileSystem().firstSector(), sourcePartition().fileSystem().lastSector());
CopyTargetFile copyTarget(fileName(), sourceDevice().logicalSectorSize());
if (!copySource.open())
report->line() << i18nc("@info/plain", "Could not open file system on source partition <filename>%1</filename> for backup.", sourcePartition().deviceNode());
else if (!copyTarget.open())
report->line() << i18nc("@info/plain", "Could not create backup file <filename>%1</filename>.", fileName());
else
rval = copyBlocks(*report, copyTarget, copySource);
}
jobFinished(*report, rval);
return rval;
}
void K3b::AudioCueFileWritingJob::start()
{
// FIXME: here we trust that a job won't be started twice :(
jobStarted();
d->canceled = false;
d->audioJobRunning = false;
importCueInProject();
}
void K3bIsoImager::init()
{
jobStarted();
cleanup();
d->dataPreparationJob->start();
}
void K3bDvdFormattingJob::start( const K3bDevice::DiskInfo& di )
{
d->canceled = false;
d->running = true;
jobStarted();
startFormatting( di );
}
bool ResizeFileSystemJob::run(Report& parent)
{
Q_ASSERT(partition().fileSystem().firstSector() != -1);
Q_ASSERT(partition().fileSystem().lastSector() != -1);
Q_ASSERT(newLength() <= partition().length());
if (partition().fileSystem().firstSector() == -1 || partition().fileSystem().lastSector() == -1 || newLength() > partition().length())
{
kWarning() << "file system first sector: " << partition().fileSystem().firstSector() << ", last sector: " << partition().fileSystem().lastSector() << ", new length: " << newLength() << ", partition length: " << partition().length();
return false;
}
bool rval = false;
Report* report = jobStarted(parent);
if (partition().fileSystem().length() == newLength())
{
report->line() << i18ncp("@info/plain", "The file system on partition <filename>%2</filename> already has the requested length of 1 sector.", "The file system on partition <filename>%2</filename> already has the requested length of %1 sectors.", newLength(), partition().deviceNode());
rval = true;
}
else
{
report->line() << i18nc("@info/plain", "Resizing file system from %1 to %2 sectors.", partition().fileSystem().length(), newLength());
FileSystem::CommandSupportType support = (newLength() < partition().fileSystem().length()) ? partition().fileSystem().supportShrink() : partition().fileSystem().supportGrow();
switch(support)
{
case FileSystem::cmdSupportBackend:
{
Report* childReport = report->newChild();
childReport->line() << i18nc("@info/plain", "Resizing a %1 file system using internal backend functions.", partition().fileSystem().name());
rval = resizeFileSystemBackend(*childReport);
break;
}
case FileSystem::cmdSupportFileSystem:
{
const qint64 newLengthInByte = Capacity(newLength() * device().logicalSectorSize()).toInt(Capacity::Byte);
rval = partition().fileSystem().resize(*report, partition().deviceNode(), newLengthInByte);
break;
}
default:
report->line() << i18nc("@info/plain", "The file system on partition <filename>%1</filename> cannot be resized because there is no support for it.", partition().deviceNode());
break;
}
if (rval)
partition().fileSystem().setLastSector(partition().fileSystem().firstSector() + newLength() - 1);
}
jobFinished(*report, rval);
return rval;
}
void K3bThreadJob::customEvent( QCustomEvent* e )
{
if( K3bDataEvent* de = dynamic_cast<K3bDataEvent*>(e) ) {
emit data( de->data(), de->length() );
}
else {
K3bProgressInfoEvent* be = static_cast<K3bProgressInfoEvent*>(e);
switch( be->type() ) {
case K3bProgressInfoEvent::Progress:
emit percent( be->firstValue() );
break;
case K3bProgressInfoEvent::SubProgress:
emit subPercent( be->firstValue() );
break;
case K3bProgressInfoEvent::ProcessedSize:
emit processedSize( be->firstValue(), be->secondValue() );
break;
case K3bProgressInfoEvent::ProcessedSubSize:
emit processedSubSize( be->firstValue(), be->secondValue() );
break;
case K3bProgressInfoEvent::InfoMessage:
emit infoMessage( be->firstString(), be->firstValue() );
break;
case K3bProgressInfoEvent::Started:
jobStarted();
break;
case K3bProgressInfoEvent::Canceled:
emit canceled();
break;
case K3bProgressInfoEvent::Finished:
// we wait until the thred really finished
// although this may be dangerous if some thread
// emits the finished signal although it has not finished yet
// but makes a lot stuff easier.
kdDebug() << "(K3bThreadJob) waiting for the thread to finish." << endl;
m_thread->wait();
kdDebug() << "(K3bThreadJob) thread finished." << endl;
cleanupJob( be->firstValue() );
m_running = false;
jobFinished( be->firstValue() );
break;
case K3bProgressInfoEvent::NewTask:
emit newTask( be->firstString() );
break;
case K3bProgressInfoEvent::NewSubTask:
emit newSubTask( be->firstString() );
break;
case K3bProgressInfoEvent::DebuggingOutput:
emit debuggingOutput( be->firstString(), be->secondString() );
break;
case K3bProgressInfoEvent::NextTrack:
emit nextTrack( be->firstValue(), be->secondValue() );
break;
}
}
}
void K3b::MusicBrainzJob::start()
{
jobStarted();
d->canceled = false;
d->currentTrackIndex = 0;
d->mbTrackLookupJob->setAudioTrack( d->tracks.first() );
d->mbTrackLookupJob->start();
}
void QueueLocal::runProgram(int jobId)
{
if (!m_process) {
m_process = new QProcess(this);
connect(m_process, SIGNAL(started()), this, SLOT(jobStarted()));
connect(m_process, SIGNAL(finished(int,QProcess::ExitStatus)),
this, SLOT(jobFinished(int,QProcess::ExitStatus)));
connect(m_process, SIGNAL(stateChanged(QProcess::ProcessState)),
this, SLOT(processStateChanged(QProcess::ProcessState)));
}
void K3b::BlankingJob::start()
{
if( m_device == 0 )
return;
jobStarted();
emit newTask( i18n( "Erasing CD-RW" ) );
emit infoMessage( i18n( "When erasing a CD-RW no progress information is available." ), MessageWarning );
slotStartErasing();
}
/*!
* This slot handles a new job being started by updating our job member, and
* emitting an appropriate signal.
*
* \param j The string describing the job.
* \param i Whether or not the job is interruptible.
*/
void CSCollectionTypeResolver::doJobStarted(const QString &j, bool i)
{ /* SLOT */
CSAbstractCollection *s =
dynamic_cast<CSAbstractCollection *>(sender());
if(s != NULL)
s->setEnabled(false);
Q_EMIT jobStarted(j, i);
}
void TaskEditor::saveChanges() {
if (!m_service)
return; // No index (and hence no task) has been set, or something is really wrong.
if (m_name != nameEdit->text()) {
kDebug() << "Name Change: " << nameEdit->text();
KConfigGroup cg = m_service->operationDescription("setName");
cg.writeEntry("name", nameEdit->text());
emit jobStarted(m_service->startOperationCall(cg));
}
if (m_date != dateEdit->text()) {
kDebug() << "Date Change: " << dateEdit->text();
KConfigGroup cg = m_service->operationDescription("setDueText");
cg.writeEntry("dueText", dateEdit->text());
emit jobStarted(m_service->startOperationCall(cg));
}
if (m_tags != tagsEdit->text()) {
QStringList tags = tagsEdit->text().split(',');
KConfigGroup cg = m_service->operationDescription("setTags");
cg.writeEntry("tags", tags);
emit jobStarted(m_service->startOperationCall(cg));
}
if (priorityEdit->nativeWidget()->currentIndex() != m_priority) {
KConfigGroup cg = m_service->operationDescription("setPriority");
cg.writeEntry("priority", priorityEdit->nativeWidget()->currentIndex() + 1);
emit jobStarted(m_service->startOperationCall(cg));
}
if (completeBox->isChecked()) {
KConfigGroup cg = m_service->operationDescription("setCompleted");
cg.writeEntry("completed", true);
emit jobStarted(m_service->startOperationCall(cg));
}
startAnimation(fullSize, false);
}
bool CheckFileSystemJob::run(Report& parent)
{
Report* report = jobStarted(parent);
// if we cannot check, assume everything is fine
bool rval = true;
if (partition().fileSystem().supportCheck() == FileSystem::cmdSupportFileSystem)
rval = partition().fileSystem().check(*report, partition().deviceNode());
jobFinished(*report, rval);
return rval;
}
void K3b::IsoImager::start()
{
jobStarted();
cleanup();
d->mkisofsBin = initMkisofs();
if( !d->mkisofsBin ) {
jobFinished( false );
return;
}
initVariables();
delete m_process;
m_process = new K3b::Process( this );
m_process->setFlags( K3bQProcess::RawStdout );
*m_process << d->mkisofsBin;
// prepare the filenames as written to the image
m_doc->prepareFilenames();
if( !prepareMkisofsFiles() ||
!addMkisofsParameters() ) {
cleanup();
jobFinished( false );
return;
}
connect( m_process, SIGNAL(finished(int,QProcess::ExitStatus)),
this, SLOT(slotProcessExited(int,QProcess::ExitStatus)) );
connect( m_process, SIGNAL(stderrLine(QString)),
this, SLOT(slotReceivedStderr(QString)) );
qDebug() << "***** mkisofs parameters:\n";
QString s = m_process->joinedArgs();
qDebug() << s << endl << flush;
emit debuggingOutput("mkisofs command:", s);
if( !m_process->start( KProcess::SeparateChannels ) ) {
// something went wrong when starting the program
// it "should" be the executable
qDebug() << "(K3b::IsoImager) could not start mkisofs";
emit infoMessage( i18n("Could not start %1.", QLatin1String("mkisofs")), K3b::Job::MessageError );
jobFinished( false );
cleanup();
}
}
void K3b::MovixJob::start()
{
jobStarted();
m_canceled = false;
m_dataJob->setWritingApp( writingApp() );
if( m_movixDocPreparer->createMovixStructures() ) {
m_dataJob->start();
}
else {
m_movixDocPreparer->removeMovixStructures();
jobFinished(false);
}
}
void K3b::DvdFormattingJob::start()
{
d->canceled = false;
d->running = true;
d->error = false;
jobStarted();
if( !d->device ) {
emit infoMessage( i18n("No device set"), MessageError );
d->running = false;
jobFinished(false);
return;
}
// FIXME: check the return value
if( K3b::isMounted( d->device ) ) {
emit infoMessage( i18n("Unmounting medium"), MessageInfo );
K3b::unmount( d->device );
}
//
// first wait for a dvd+rw, dvd-rw, or bd-re
// Be aware that an empty DVD-RW might be reformatted to another writing mode
// so we also wait for empty dvds
//
if( waitForMedium( d->device,
Device::STATE_COMPLETE|Device::STATE_INCOMPLETE|Device::STATE_EMPTY,
Device::MEDIA_REWRITABLE_DVD|Device::MEDIA_BD_RE,
0,
i18n("Please insert a rewritable DVD or Blu-ray medium into drive<p><b>%1 %2 (%3)</b>.",
d->device->vendor(),
d->device->description(),
d->device->blockDeviceName()) ) == Device::MEDIA_UNKNOWN ) {
emit canceled();
d->running = false;
jobFinished(false);
return;
}
emit infoMessage( i18n("Checking medium"), MessageInfo );
emit newTask( i18n("Checking medium") );
connect( Device::sendCommand( Device::DeviceHandler::CommandDiskInfo, d->device ),
SIGNAL(finished(K3b::Device::DeviceHandler*)),
this,
SLOT(slotDeviceHandlerFinished(K3b::Device::DeviceHandler*)) );
}
void K3bDvdFormattingJob::start()
{
d->canceled = false;
d->running = true;
d->error = false;
jobStarted();
if( !d->device ) {
emit infoMessage( i18n("No device set"), ERROR );
d->running = false;
jobFinished(false);
return;
}
// FIXME: check the return value
if( K3b::isMounted( d->device ) ) {
emit infoMessage( i18n("Unmounting medium"), INFO );
K3b::unmount( d->device );
}
//
// first wait for a dvd+rw or dvd-rw
// Be aware that an empty DVD-RW might be reformatted to another writing mode
// so we also wait for empty dvds
//
if( waitForMedia( d->device,
K3bDevice::STATE_COMPLETE|K3bDevice::STATE_INCOMPLETE|K3bDevice::STATE_EMPTY,
K3bDevice::MEDIA_WRITABLE_DVD,
i18n("Please insert a rewritable DVD medium into drive<p><b>%1 %2 (%3)</b>.")
.arg(d->device->vendor()).arg(d->device->description()).arg(d->device->devicename()) ) == -1 ) {
emit canceled();
d->running = false;
jobFinished(false);
return;
}
emit infoMessage( i18n("Checking media..."), INFO );
emit newTask( i18n("Checking media") );
connect( K3bDevice::sendCommand( K3bDevice::DeviceHandler::NG_DISKINFO, d->device ),
SIGNAL(finished(K3bDevice::DeviceHandler*)),
this,
SLOT(slotDeviceHandlerFinished(K3bDevice::DeviceHandler*)) );
}
void K3b::Md5Job::start()
{
cancel();
jobStarted();
d->readData = 0;
if( d->isoFile ) {
d->imageSize = d->isoFile->size();
}
else if( !d->filename.isEmpty() ) {
if( !QFile::exists( d->filename ) ) {
emit infoMessage( i18n("Could not find file %1",d->filename), MessageError );
jobFinished(false);
return;
}
d->file.setName( d->filename );
if( !d->file.open( QIODevice::ReadOnly ) ) {
emit infoMessage( i18n("Could not open file %1",d->filename), MessageError );
jobFinished(false);
return;
}
d->imageSize = K3b::filesize( QUrl::fromLocalFile(d->filename) );
}
else
d->imageSize = 0;
if( d->device ) {
//
// Let the drive determine the optimal reading speed
//
d->device->setSpeed( 0xffff, 0xffff );
}
d->md5.reset();
d->finished = false;
if( d->ioDevice )
connect( d->ioDevice, SIGNAL(readyRead()), this, SLOT(slotUpdate()) );
else
d->timer.start(0);
}
bool CreatePartitionJob::run(Report& parent)
{
Q_ASSERT(partition().devicePath() == device().deviceNode());
bool rval = false;
Report* report = jobStarted(parent);
CoreBackendDevice* backendDevice = CoreBackendManager::self()->backend()->openDevice(device().deviceNode());
if (backendDevice)
{
CoreBackendPartitionTable* backendPartitionTable = backendDevice->openPartitionTable();
if (backendPartitionTable)
{
QString partitionPath = backendPartitionTable->createPartition(*report, partition());
if (partitionPath != QString())
{
rval = true;
partition().setPartitionPath(partitionPath);
partition().setState(Partition::StateNone);
backendPartitionTable->commit();
}
else
report->line() << xi18nc("@info/plain", "Failed to add partition <filename>%1</filename> to device <filename>%2</filename>.", partition().deviceNode(), device().deviceNode());
delete backendPartitionTable;
}
else
report->line() << xi18nc("@info/plain", "Could not open partition table on device <filename>%1</filename> to create new partition <filename>%2</filename>.", device().deviceNode(), partition().deviceNode());
delete backendDevice;
}
else
report->line() << xi18nc("@info/plain", "Could not open device <filename>%1</filename> to create new partition <filename>%2</filename>.", device().deviceNode(), partition().deviceNode());
jobFinished(*report, rval);
return rval;
}
QDBusObjectPath JobManager::startJob(const QString &command)
{
if (command.isEmpty()) {
qWarning("%s: 'command' must be specified", Q_FUNC_INFO);
return QDBusObjectPath();
}
const int jobId = m_nextJobId++;
m_jobs[jobId] = new Job(jobId, command, this);
connect(m_jobs[jobId], SIGNAL(finished(Job*)),
this, SLOT(onJobFinished(Job*)));
new JobViewAdaptor(m_jobs[jobId]);
const QString path = QString("/com/tieto/sysjt/JobView%1").arg(jobId);
QDBusConnection::sessionBus().registerObject(path, m_jobs[jobId]);
emit jobStarted(m_jobs[jobId]);
return QDBusObjectPath(path);
}
bool SetPartFlagsJob::run(Report& parent)
{
bool rval = true;
Report* report = jobStarted(parent);
CoreBackendDevice* backendDevice = CoreBackendManager::self()->backend()->openDevice(device().deviceNode());
if (backendDevice) {
CoreBackendPartitionTable* backendPartitionTable = backendDevice->openPartitionTable();
if (backendPartitionTable) {
CoreBackendPartition* backendPartition = (partition().roles().has(PartitionRole::Extended))
? backendPartitionTable->getExtendedPartition()
: backendPartitionTable->getPartitionBySector(partition().firstSector());
if (backendPartition) {
quint32 count = 0;
foreach(const PartitionTable::Flag & f, PartitionTable::flagList()) {
emit progress(++count);
const bool state = (flags() & f) ? true : false;
if (!backendPartition->setFlag(*report, f, state)) {
report->line() << xi18nc("@info:progress", "There was an error setting flag %1 for partition <filename>%2</filename> to state %3.", PartitionTable::flagName(f), partition().deviceNode(), state ? xi18nc("@info:progress flag turned on, active", "on") : xi18nc("@info:progress flag turned off, inactive", "off"));
rval = false;
}
}
delete backendPartition;
} else
report->line() << xi18nc("@info:progress", "Could not find partition <filename>%1</filename> on device <filename>%2</filename> to set partition flags.", partition().deviceNode(), device().deviceNode());
if (rval)
backendPartitionTable->commit();
delete backendPartitionTable;
} else
void K3b::VcdJob::start()
{
qDebug() << "(K3b::VcdJob) starting job";
jobStarted();
emit burning( false );
m_canceled = false;
int pos = QString( m_doc->vcdImage() ).indexOf( ".bin", QString( m_doc->vcdImage() ).length() - 4 );
if ( pos > 0 ) {
m_cueFile = m_doc->vcdImage().left( pos ) + ".cue";
} else {
m_cueFile = m_doc->vcdImage() + ".cue";
m_doc->setVcdImage( m_doc->vcdImage() + ".bin" );
}
if ( vcdDoc() ->onlyCreateImages() )
m_createimageonlypercent = 50.0;
// vcdxGen();
xmlGen();
}
bool CreateFileSystemJob::run(Report& parent)
{
bool rval = false;
Report* report = jobStarted(parent);
if (partition().fileSystem().type() == FileSystem::Unformatted)
return true;
if (partition().fileSystem().supportCreate() == FileSystem::cmdSupportFileSystem) {
if (partition().fileSystem().create(*report, partition().deviceNode())) {
CoreBackendDevice* backendDevice = CoreBackendManager::self()->backend()->openDevice(device().deviceNode());
if (backendDevice) {
CoreBackendPartitionTable* backendPartitionTable = backendDevice->openPartitionTable();
if (backendPartitionTable) {
if (backendPartitionTable->setPartitionSystemType(*report, partition())) {
rval = true;
backendPartitionTable->commit();
} else
report->line() << xi18nc("@info:progress", "Failed to set the system type for the file system on partition <filename>%1</filename>.", partition().deviceNode());
delete backendPartitionTable;
} else
report->line() << xi18nc("@info:progress", "Could not open partition table on device <filename>%1</filename> to set the system type for partition <filename>%2</filename>.", device().deviceNode(), partition().deviceNode());
delete backendDevice;
} else
report->line() << xi18nc("@info:progress", "Could not open device <filename>%1</filename> to set the system type for partition <filename>%2</filename>.", device().deviceNode(), partition().deviceNode());
}
}
jobFinished(*report, rval);
return rval;
}
void RunManagerWatcher::started(const openstudio::UUID &id)
{
jobStarted(id);
}
void PlotTableWidget::bagReaderReadingStarted() {
emit jobStarted("Reading bag from [file://"+
bagReader_->getFileName()+"]...");
}
tstMainWindow::tstMainWindow(QWidget *parent) : QMainWindow(parent)
{
d = new tstMainWindowPrivate;
d->controller = new dtkDistributedController;
d->status_model = new dtkDistributedControllerStatusModel(this);
d->status_model->setController(d->controller);
d->status_view = new dtkDistributedControllerStatusView(this);
d->status_view->setModel(d->status_model);
d->host_address = new QLineEdit("dtk://nef-devel.inria.fr:9999", this);
d->host_address->setAttribute(Qt::WA_MacShowFocusRect, false);
d->host_button = new QPushButton("Connect", this);
d->host_button->setAttribute(Qt::WA_MacShowFocusRect, false);
d->host_button->setFixedWidth(200);
d->submit_nodes = new QSpinBox(this);
d->submit_nodes->setMaximum(100);
d->submit_nodes->setValue(2);
d->submit_cores = new QSpinBox(this);
d->submit_cores->setMaximum(48);
d->submit_cores->setValue(8);
d->submit_value = new QSpinBox(this);
d->submit_value->setMaximum(100000);
d->submit_value->setValue(100000);
d->submit_button = new QPushButton("Submit", this);
d->submit_button->setAttribute(Qt::WA_MacShowFocusRect, false);
d->submit_button->setFixedWidth(200);
QHBoxLayout *host_layout = new QHBoxLayout;
host_layout->addWidget(d->host_address);
host_layout->addWidget(d->host_button);
QHBoxLayout *submit_layout = new QHBoxLayout;
submit_layout->addWidget(d->submit_nodes);
submit_layout->addWidget(d->submit_cores);
submit_layout->addWidget(d->submit_value);
submit_layout->addWidget(d->submit_button);
QWidget *host_widget = new QWidget(this);
host_widget->setLayout(host_layout);
QWidget *submit_widget = new QWidget(this);
submit_widget->setLayout(submit_layout);
QWidget *central = new QWidget(this);
QVBoxLayout *central_layout = new QVBoxLayout(central);
central_layout->setContentsMargins(0, 0, 0, 0);
central_layout->setSpacing(0);
central_layout->addWidget(host_widget);
central_layout->addWidget(d->status_view);
central_layout->addWidget(submit_widget);
this->setCentralWidget(central);
this->setUnifiedTitleAndToolBarOnMac(true);
this->setWindowTitle("dtkDistributedTutorial - Step #6");
connect(d->host_button, SIGNAL(clicked()), this, SLOT(onConnect()));
connect(d->submit_button, SIGNAL(clicked()), this, SLOT(onSubmit()));
connect(d->controller, SIGNAL(dataPosted(const QByteArray&)), this, SLOT(onDataPosted(const QByteArray&)));
connect(d->controller, SIGNAL(jobStarted(QString)), this, SLOT(onJobStarted(QString)));
}
void K3bMixedJob::start()
{
jobStarted();
m_canceled = false;
m_errorOccuredAndAlreadyReported = false;
d->copiesDone = 0;
d->copies = m_doc->copies();
m_currentAction = PREPARING_DATA;
d->maxSpeed = false;
if( m_doc->dummy() )
d->copies = 1;
prepareProgressInformation();
//
// Check if all files exist
//
QValueList<K3bAudioFile*> nonExistingFiles;
K3bAudioTrack* track = m_doc->audioDoc()->firstTrack();
while( track ) {
K3bAudioDataSource* source = track->firstSource();
while( source ) {
if( K3bAudioFile* file = dynamic_cast<K3bAudioFile*>( source ) ) {
if( !QFile::exists( file->filename() ) )
nonExistingFiles.append( file );
}
source = source->next();
}
track = track->next();
}
if( !nonExistingFiles.isEmpty() ) {
if( questionYesNo( "<p>" + i18n("The following files could not be found. Do you want to remove them from the "
"project and continue without adding them to the image?") +
"<p>" + createNonExistingFilesString( nonExistingFiles, 10 ),
i18n("Warning"),
i18n("Remove missing files and continue"),
i18n("Cancel and go back") ) ) {
for( QValueList<K3bAudioFile*>::const_iterator it = nonExistingFiles.begin();
it != nonExistingFiles.end(); ++it ) {
delete *it;
}
}
else {
m_canceled = true;
emit canceled();
jobFinished(false);
return;
}
}
//
// Make sure the project is not empty
//
if( m_doc->audioDoc()->numOfTracks() == 0 ) {
emit infoMessage( i18n("Please add files to your project first."), ERROR );
jobFinished(false);
return;
}
// set some flags that are needed
m_doc->audioDoc()->setOnTheFly( m_doc->onTheFly() ); // for the toc writer
m_doc->audioDoc()->setHideFirstTrack( false ); // unsupported
m_doc->dataDoc()->setBurner( m_doc->burner() ); // so the isoImager can read ms data
emit newTask( i18n("Preparing data") );
determineWritingMode();
//
// First we make sure the data portion is valid
//
// we do not have msinfo yet
m_currentAction = INITIALIZING_IMAGER;
m_isoImager->setMultiSessionInfo( QString::null );
m_isoImager->init();
}
bool CreatePartitionJob::run(Report& parent)
{
Q_ASSERT(partition().devicePath() == device().deviceNode());
bool rval = false;
Report* report = jobStarted(parent);
// According to libParted docs, PedPartitionType can be "NULL if unknown". That's obviously wrong,
// it's a typedef for an enum. So let's use something the libparted devs will hopefully never
// use...
PedPartitionType pedType = static_cast<PedPartitionType>(0xffffffff);
if (partition().roles().has(PartitionRole::Extended))
pedType = PED_PARTITION_EXTENDED;
else if (partition().roles().has(PartitionRole::Logical))
pedType = PED_PARTITION_LOGICAL;
else if (partition().roles().has(PartitionRole::Primary))
pedType = PED_PARTITION_NORMAL;
if (pedType == static_cast<int>(0xffffffff))
{
report->line() << i18nc("@info/plain", "Unknown partition role for new partition <filename>%1</filename> (roles: %2)", partition().deviceNode(), partition().roles().toString());
}
else if (openPed(device().deviceNode()))
{
PedFileSystemType* pedFsType = (partition().roles().has(PartitionRole::Extended) || partition().fileSystem().type() == FileSystem::Unformatted) ? NULL : getPedFileSystemType(partition().fileSystem().type());
PedPartition* pedPartition = ped_partition_new(pedDisk(), pedType, pedFsType, partition().firstSector(), partition().lastSector());
if (pedPartition)
{
PedConstraint* pedConstraint = NULL;
PedGeometry* pedGeometry = ped_geometry_new(pedDevice(), partition().firstSector(), partition().length());
if (pedGeometry)
pedConstraint = ped_constraint_exact(pedGeometry);
if (pedConstraint)
{
if (ped_disk_add_partition(pedDisk(), pedPartition, pedConstraint) && commit())
{
partition().setNumber(pedPartition->num);
partition().setState(Partition::StateNone);
partition().setFirstSector(pedPartition->geom.start);
partition().setLastSector(pedPartition->geom.end);
rval = true;
}
else
report->line() << i18nc("@info/plain", "Failed to add partition <filename>%1</filename> to device <filename>%2</filename>.", partition().deviceNode(), device().deviceNode());
ped_constraint_destroy(pedConstraint);
}
else
report->line() << i18nc("@info/plain", "Failed to create a new partition: could not get geometry for constraint.");
}
else
report->line() << i18nc("@info/plain", "Failed to create new partition <filename>%1</filename>.", partition().deviceNode());
closePed();
}
else
report->line() << i18nc("@info/plain", "Could not open device <filename>%1</filename> to create new partition <filename>%2</filename>.", device().deviceNode(), partition().deviceNode());
jobFinished(*report, rval);
return rval;
}
void TaskEditor::saveAsCompleted() {
KConfigGroup cg = m_service->operationDescription("setCompleted");
cg.writeEntry("completed", true);
emit jobStarted(m_service->startOperationCall(cg));
}
