/// destroys the given socket
void net_wiznet_closesocket(JsNetwork *net, int sckt) {
NOT_USED(net);
// try and close gracefully
disconnect((uint8_t)sckt);
JsSysTime timeout = jshGetSystemTime()+jshGetTimeFromMilliseconds(1000);
uint8_t status;
while ((status=getSn_SR((uint8_t)sckt)) != SOCK_CLOSED &&
jshGetSystemTime()<timeout) ;
// if that didn't work, force it
if (status != SOCK_CLOSED)
closesocket((uint8_t)sckt);
// Wiznet is a bit strange in that it uses the same socket for server and client
if (sckt & WIZNET_SERVER_CLIENT) {
// so it's just closed, but put it into 'listen' mode again
sckt = socket((uint8_t)sckt, Sn_MR_TCP, wiznetSocketPorts[sckt&7], SF_IO_NONBLOCK);
listen((uint8_t)sckt);
// Be sure to mark it as not a client socket any more
wiznetSocketAsServerClient = wiznetSocketAsServerClient & (unsigned char)~(1<<(sckt&7));
}
}
/*JSON{ "type":"function", "name" : "setTimeout",
"description" : ["Call the function specified ONCE after the timeout in milliseconds.",
"The function that is being called may also take an argument, which is an object containing a field called 'time' (the time in seconds at which the timer happened)",
"for example: ```setTimeout(function (e) { print(e.time); }, 1000);```",
"This can also be removed using clearTimeout",
"**Note:** If `setDeepSleep(true)` has been called and the interval is greater than 5 seconds, Espruino may execute the interval up to 1 second late. This is because Espruino can only wake from deep sleep every second - and waking early would cause Espruino to waste power while it waited for the correct time." ],
"generate" : "jswrap_interface_setTimeout",
"params" : [ [ "function", "JsVar", "A Function or String to be executed"],
[ "timeout", "float", "The time until the function will be executed" ] ],
"return" : ["JsVar", "An ID that can be passed to clearTimeout"]
}*/
JsVar *_jswrap_interface_setTimeoutOrInterval(JsVar *func, JsVarFloat interval, bool isTimeout) {
// NOTE: The 5 sec delay mentioned in the description is handled by jshSleep
JsVar *itemIndex = 0;
if (!jsvIsFunction(func) && !jsvIsString(func)) {
jsError("Function or String not supplied!");
} else {
// Create a new timer
JsVar *timerPtr = jsvNewWithFlags(JSV_OBJECT);
if (interval<TIMER_MIN_INTERVAL) interval=TIMER_MIN_INTERVAL;
JsVarInt intervalInt = jshGetTimeFromMilliseconds(interval);
jsvUnLock(jsvObjectSetChild(timerPtr, "time", jsvNewFromInteger(jshGetSystemTime() + intervalInt)));
jsvUnLock(jsvObjectSetChild(timerPtr, "interval", jsvNewFromInteger(intervalInt)));
if (!isTimeout) jsvUnLock(jsvObjectSetChild(timerPtr, "recur", jsvNewFromBool(true)));
jsvObjectSetChild(timerPtr, "callback", func); // intentionally no unlock
// Add to array
itemIndex = jsvNewFromInteger(jsiTimerAdd(timerPtr));
jsvUnLock(timerPtr);
}
return itemIndex;
}
void jshPinPulse(Pin pin, bool pulsePolarity, JsVarFloat pulseTime) {
// ---- USE TIMER FOR PULSE
if (!jshIsPinValid(pin)) {
jsExceptionHere(JSET_ERROR, "Invalid pin!");
return;
}
if (pulseTime<=0) {
// just wait for everything to complete
jstUtilTimerWaitEmpty();
return;
} else {
// find out if we already had a timer scheduled
UtilTimerTask task;
if (!jstGetLastPinTimerTask(pin, &task)) {
// no timer - just start the pulse now!
jshPinOutput(pin, pulsePolarity);
task.time = jshGetSystemTime();
}
// Now set the end of the pulse to happen on a timer
jstPinOutputAtTime(task.time + jshGetTimeFromMilliseconds(pulseTime), &pin, 1, !pulsePolarity);
}
}
/*JSON{
"type" : "function",
"name" : "changeInterval",
"generate" : "jswrap_interface_changeInterval",
"params" : [
["id","JsVar","The id returned by a previous call to setInterval"],
["time","float","The new time period in ms"]
]
}
Change the Interval on a callback created with setInterval, for example:
```var id = setInterval(function () { print('foo'); }, 1000); // every second```
```changeInterval(id, 1500); // now runs every 1.5 seconds```
This takes effect the next time the callback is called (so it is not immediate).
*/
void jswrap_interface_changeInterval(JsVar *idVar, JsVarFloat interval) {
JsVar *timerArrayPtr = jsvLock(timerArray);
if (interval<TIMER_MIN_INTERVAL) interval=TIMER_MIN_INTERVAL;
JsVar *timerName = jsvIsBasic(idVar) ? jsvFindChildFromVar(timerArrayPtr, idVar, false) : 0;
if (timerName) {
JsVar *timer = jsvSkipNameAndUnLock(timerName);
JsVar *v;
JsVarInt intervalInt = (JsVarInt)jshGetTimeFromMilliseconds(interval);
v = jsvNewFromInteger(intervalInt);
jsvUnLock(jsvSetNamedChild(timer, v, "interval"));
jsvUnLock(v);
v = jsvNewFromInteger((JsVarInt)(jshGetSystemTime()-jsiLastIdleTime) + intervalInt);
jsvUnLock(jsvSetNamedChild(timer, v, "time"));
jsvUnLock(v);
jsvUnLock(timer);
// timerName already unlocked
jsiTimersChanged(); // mark timers as changed
} else {
jsExceptionHere(JSET_ERROR, "Unknown Interval");
}
jsvUnLock(timerArrayPtr);
}
/*JSON{
"type" : "function",
"name" : "setTimeout",
"generate" : "jswrap_interface_setTimeout",
"params" : [
["function","JsVar","A Function or String to be executed"],
["timeout","float","The time until the function will be executed"]
],
"return" : ["JsVar","An ID that can be passed to clearTimeout"]
}
Call the function specified ONCE after the timeout in milliseconds.
The function that is being called may also take an argument, which is an object containing a field called 'time' (the time in seconds at which the timer happened)
for example: ```setTimeout(function (e) { print(e.time); }, 1000);```
This can also be removed using clearTimeout
**Note:** If `setDeepSleep(true)` has been called and the interval is greater than 5 seconds, Espruino may execute the interval up to 1 second late. This is because Espruino can only wake from deep sleep every second - and waking early would cause Espruino to waste power while it waited for the correct time.
*/
JsVar *_jswrap_interface_setTimeoutOrInterval(JsVar *func, JsVarFloat interval, bool isTimeout) {
// NOTE: The 5 sec delay mentioned in the description is handled by jshSleep
JsVar *itemIndex = 0;
if (!jsvIsFunction(func) && !jsvIsString(func)) {
jsExceptionHere(JSET_ERROR, "Function or String not supplied!");
} else {
// Create a new timer
JsVar *timerPtr = jsvNewWithFlags(JSV_OBJECT);
if (interval<TIMER_MIN_INTERVAL) interval=TIMER_MIN_INTERVAL;
JsSysTime intervalInt = jshGetTimeFromMilliseconds(interval);
//jsiConsolePrintf("interval = %f,intervalInt = %d,now = %d,timeInt = %d\n",interval,intervalInt,jshGetSystemTime(),(jshGetSystemTime() - jsiLastIdleTime) + intervalInt);
jsvUnLock(jsvObjectSetChild(timerPtr, "time", jsvNewFromLongInteger((jshGetSystemTime() - jsiLastIdleTime) + intervalInt)));
if (!isTimeout) {
jsvUnLock(jsvObjectSetChild(timerPtr, "interval", jsvNewFromLongInteger(intervalInt)));
}
jsvObjectSetChild(timerPtr, "callback", func); // intentionally no unlock
// Add to array
itemIndex = jsvNewFromInteger(jsiTimerAdd(timerPtr));
jsvUnLock(timerPtr);
}
return itemIndex;
}
unsigned char *
hci_event_handler(void *pRetParams, unsigned char *from, unsigned char *fromlen)
{
unsigned char *pucReceivedData, ucArgsize;
unsigned short usLength;
unsigned char *pucReceivedParams;
unsigned short usReceivedEventOpcode = 0;
unsigned long retValue32;
unsigned char * RecvParams;
unsigned char *RetParams;
JsSysTime timeout = jshGetSystemTime() + jshGetTimeFromMilliseconds(10000); // blocking for 10 seconds (!!!)
cc3000_irq_disable();
while (!jspIsInterrupted())
{
if (tSLInformation.usEventOrDataReceived != 0)
{
pucReceivedData = (tSLInformation.pucReceivedData);
if (*pucReceivedData == HCI_TYPE_EVNT)
{
// Event Received
STREAM_TO_UINT16((char *)pucReceivedData, HCI_EVENT_OPCODE_OFFSET,
usReceivedEventOpcode);
pucReceivedParams = pucReceivedData + HCI_EVENT_HEADER_SIZE;
RecvParams = pucReceivedParams;
RetParams = pRetParams;
// In case unsolicited event received - here the handling finished
if (hci_unsol_event_handler((char *)pucReceivedData) == 0)
{
STREAM_TO_UINT8(pucReceivedData, HCI_DATA_LENGTH_OFFSET, usLength);
switch(usReceivedEventOpcode)
{
case HCI_CMND_READ_BUFFER_SIZE:
{
STREAM_TO_UINT8((char *)pucReceivedParams, 0,
tSLInformation.usNumberOfFreeBuffers);
STREAM_TO_UINT16((char *)pucReceivedParams, 1,
tSLInformation.usSlBufferLength);
}
break;
case HCI_CMND_WLAN_CONFIGURE_PATCH:
case HCI_NETAPP_DHCP:
case HCI_NETAPP_PING_SEND:
case HCI_NETAPP_PING_STOP:
case HCI_NETAPP_ARP_FLUSH:
case HCI_NETAPP_SET_DEBUG_LEVEL:
case HCI_NETAPP_SET_TIMERS:
case HCI_EVNT_NVMEM_READ:
case HCI_EVNT_NVMEM_CREATE_ENTRY:
case HCI_CMND_NVMEM_WRITE_PATCH:
case HCI_NETAPP_PING_REPORT:
case HCI_EVNT_MDNS_ADVERTISE:
STREAM_TO_UINT8(pucReceivedData, HCI_EVENT_STATUS_OFFSET
,*(unsigned char *)pRetParams);
break;
case HCI_CMND_SETSOCKOPT:
case HCI_CMND_WLAN_CONNECT:
case HCI_CMND_WLAN_IOCTL_STATUSGET:
case HCI_EVNT_WLAN_IOCTL_ADD_PROFILE:
case HCI_CMND_WLAN_IOCTL_DEL_PROFILE:
case HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY:
case HCI_CMND_WLAN_IOCTL_SET_SCANPARAM:
case HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START:
case HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP:
case HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX:
case HCI_CMND_EVENT_MASK:
case HCI_EVNT_WLAN_DISCONNECT:
case HCI_EVNT_SOCKET:
case HCI_EVNT_BIND:
case HCI_CMND_LISTEN:
case HCI_EVNT_CLOSE_SOCKET:
case HCI_EVNT_CONNECT:
case HCI_EVNT_NVMEM_WRITE:
STREAM_TO_UINT32((char *)pucReceivedParams,0
,*(unsigned long *)pRetParams);
break;
case HCI_EVNT_READ_SP_VERSION:
STREAM_TO_UINT8(pucReceivedData, HCI_EVENT_STATUS_OFFSET
,*(unsigned char *)pRetParams);
pRetParams = ((char *)pRetParams) + 1;
STREAM_TO_UINT32((char *)pucReceivedParams, 0, retValue32);
UINT32_TO_STREAM((unsigned char *)pRetParams, retValue32);
break;
case HCI_EVNT_BSD_GETHOSTBYNAME:
STREAM_TO_UINT32((char *)pucReceivedParams
,GET_HOST_BY_NAME_RETVAL_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams
,GET_HOST_BY_NAME_ADDR_OFFSET,*(unsigned long *)pRetParams);
break;
case HCI_EVNT_ACCEPT:
{
STREAM_TO_UINT32((char *)pucReceivedParams,ACCEPT_SD_OFFSET
,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams
,ACCEPT_RETURN_STATUS_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
//This argument returns in network order
memcpy((unsigned char *)pRetParams,
pucReceivedParams + ACCEPT_ADDRESS__OFFSET, sizeof(sockaddr));
break;
}
case HCI_EVNT_RECV:
case HCI_EVNT_RECVFROM:
{
STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE__FLAGS__OFFSET,*(unsigned long *)pRetParams);
if(((tBsdReadReturnParams *)pRetParams)->iNumberOfBytes == ERROR_SOCKET_INACTIVE)
{
set_socket_active_status(((tBsdReadReturnParams *)pRetParams)->iSocketDescriptor,SOCKET_STATUS_INACTIVE);
}
break;
}
case HCI_EVNT_SEND:
case HCI_EVNT_SENDTO:
{
STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
break;
}
case HCI_EVNT_SELECT:
{
STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_STATUS_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_READFD_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_WRITEFD_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_EXFD_OFFSET,*(unsigned long *)pRetParams);
break;
}
case HCI_CMND_GETSOCKOPT:
STREAM_TO_UINT8(pucReceivedData, HCI_EVENT_STATUS_OFFSET,((tBsdGetSockOptReturnParams *)pRetParams)->iStatus);
//This argument returns in network order
memcpy((unsigned char *)pRetParams, pucReceivedParams, 4);
break;
case HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS:
STREAM_TO_UINT32((char *)pucReceivedParams,GET_SCAN_RESULTS_TABlE_COUNT_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT32((char *)pucReceivedParams,GET_SCAN_RESULTS_SCANRESULT_STATUS_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 4;
STREAM_TO_UINT16((char *)pucReceivedParams,GET_SCAN_RESULTS_ISVALID_TO_SSIDLEN_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 2;
STREAM_TO_UINT16((char *)pucReceivedParams,GET_SCAN_RESULTS_FRAME_TIME_OFFSET,*(unsigned long *)pRetParams);
pRetParams = ((char *)pRetParams) + 2;
memcpy((unsigned char *)pRetParams, (char *)(pucReceivedParams + GET_SCAN_RESULTS_FRAME_TIME_OFFSET + 2), GET_SCAN_RESULTS_SSID_MAC_LENGTH);
break;
case HCI_CMND_SIMPLE_LINK_START:
break;
case HCI_NETAPP_IPCONFIG:
//Read IP address
STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
RecvParams += 4;
//Read subnet
STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
RecvParams += 4;
//Read default GW
STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
RecvParams += 4;
//Read DHCP server
STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
RecvParams += 4;
//Read DNS server
STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_IP_LENGTH);
RecvParams += 4;
//Read Mac address
STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_MAC_LENGTH);
RecvParams += 6;
//Read SSID
STREAM_TO_STREAM(RecvParams,RetParams,NETAPP_IPCONFIG_SSID_LENGTH);
}
}
if (usReceivedEventOpcode == tSLInformation.usRxEventOpcode)
{
tSLInformation.usRxEventOpcode = 0;
}
}
else
{
pucReceivedParams = pucReceivedData;
STREAM_TO_UINT8((char *)pucReceivedData, HCI_PACKET_ARGSIZE_OFFSET, ucArgsize);
STREAM_TO_UINT16((char *)pucReceivedData, HCI_PACKET_LENGTH_OFFSET, usLength);
// Data received: note that the only case where from and from length
// are not null is in recv from, so fill the args accordingly
if (from)
{
STREAM_TO_UINT32((char *)(pucReceivedData + HCI_DATA_HEADER_SIZE), BSD_RECV_FROM_FROMLEN_OFFSET, *(unsigned long *)fromlen);
memcpy(from, (pucReceivedData + HCI_DATA_HEADER_SIZE + BSD_RECV_FROM_FROM_OFFSET) ,*fromlen);
}
if (pRetParams) // GW: just in case. It'll probably still crash though :(
memcpy(pRetParams, pucReceivedParams + HCI_DATA_HEADER_SIZE + ucArgsize,
usLength - ucArgsize);
tSLInformation.usRxDataPending = 0;
}
tSLInformation.usEventOrDataReceived = 0;
cc3000_spi_resume();
// Since we are going to TX - we need to handle this event after the
// ResumeSPi since we need interrupts
if ((*pucReceivedData == HCI_TYPE_EVNT) &&
(usReceivedEventOpcode == HCI_EVNT_PATCHES_REQ))
{
hci_unsol_handle_patch_request((char *)pucReceivedData);
}
if ((tSLInformation.usRxEventOpcode == 0) && (tSLInformation.usRxDataPending == 0))
{
cc3000_irq_enable();
return NULL;
}
} else
cc3000_check_irq_pin();
if (jshGetSystemTime() > timeout) {
jspSetInterrupted(true);
jsError("Timeout in CC3000 driver (%d)", tSLInformation.usRxEventOpcode);
break;
}
}
cc3000_irq_enable();
return NULL;
}
/*JSON{ "type":"method", "class": "Pin", "name" : "writeAtTime", "ifndef" : "SAVE_ON_FLASH",
"description" : "Sets the output state of the pin to the parameter given at the specified time",
"generate" : "jswrap_pin_writeAtTime",
"params" : [ [ "value", "bool", "Whether to set output high (true/1) or low (false/0)"],
["time", "float", "Time at which to write"] ]
}*/
void jswrap_pin_writeAtTime(JsVar *parent, bool value, JsVarFloat time) {
Pin pin = jshGetPinFromVar(parent);
JsSysTime sTime = jshGetTimeFromMilliseconds(time*1000);
jstPinOutputAtTime(sTime, &pin, 1, value);
}
/*JSON{
"type" : "function",
"name" : "setTime",
"generate" : "jswrap_interactive_setTime",
"params" : [
["time","float",""]
]
}
Set the current system time in seconds (to the nearest second)
*/
void jswrap_interactive_setTime(JsVarFloat time) {
JsSysTime stime = jshGetTimeFromMilliseconds(time*1000);
jsiLastIdleTime = stime;
jshSetSystemTime(stime);
}
/*JSON{
"type" : "staticmethod",
"class" : "Date",
"name" : "now",
"generate" : "jswrap_date_now",
"return" : ["float",""]
}
Get the number of milliseconds elapsed since 1970 (or on embedded platforms, since startup)
*/
JsVarFloat jswrap_date_now() {
// Not quite sure why we need this, but (JsVarFloat)jshGetSystemTime() / (JsVarFloat)jshGetTimeFromMilliseconds(1) in inaccurate on STM32
return ((JsVarFloat)jshGetSystemTime() / (JsVarFloat)jshGetTimeFromMilliseconds(1000)) * 1000;
}
/*JSON{
"type" : "staticmethod",
"class" : "Trig",
"name" : "getPosAtTime",
"generate" : "jswrap_trig_getPosAtTime",
"params" : [
["time","float","The time at which to find the position"]
],
"return" : ["float","The position of the trigger wheel in degrees - as a floating point number"]
}
Get the position of the trigger wheel at the given time (from getTime)
*/
JsVarFloat jswrap_trig_getPosAtTime(JsVarFloat time) {
JsSysTime sTime = (JsSysTime)(time * (JsVarFloat)jshGetTimeFromMilliseconds(1000));
TriggerStruct *trig = &mainTrigger;
JsVarFloat position = trigGetToothAtTime(trig, sTime);
return wrapAround((position * 360 / trig->teethTotal) + trig->keyPosition, 360);
}
/*JSON{
"type" : "staticmethod",
"class" : "Trig",
"name" : "getRPM",
"generate" : "jswrap_trig_getRPM",
"return" : ["float","The current RPM of the trigger wheel"]
}
Get the RPM of the trigger wheel
*/
JsVarFloat jswrap_trig_getRPM() {
TriggerStruct *trig = &mainTrigger;
if (jshGetSystemTime() > (trig->lastTime + trig->maxTooth)) return 0;
return jshGetTimeFromMilliseconds(60000) / (JsVarFloat)(trig->avrTooth * trig->teethTotal);
}
bool wice_msg_isTimeout(WiceMessage *msg){
JsVarFloat current = (JsVarFloat)jshGetSystemTime() / (JsVarFloat)jshGetTimeFromMilliseconds(1000);
return (current > (msg->startTime + 20));
}
void wice_msg_start(WiceMessage *msg){
if (!msg->hasStarted){
msg->startTime = (JsVarFloat)jshGetSystemTime() / (JsVarFloat)jshGetTimeFromMilliseconds(1000);
msg->hasStarted = true;
}
}
