bool jsi2cPopulateI2CInfo(
JshI2CInfo *inf,
JsVar *options
) {
jshI2CInitInfo(inf);
jsvConfigObject configs[] = {
{"scl", JSV_PIN, &inf->pinSCL},
{"sda", JSV_PIN, &inf->pinSDA},
{"bitrate", JSV_INTEGER, &inf->bitrate}
};
if (jsvReadConfigObject(options, configs, sizeof(configs) / sizeof(jsvConfigObject))) {
return true;
} else
return false;
}
/*JSON{
"type" : "method",
"class" : "Serial",
"name" : "setup",
"generate" : "jswrap_serial_setup",
"params" : [
["baudrate","JsVar","The baud rate - the default is 9600"],
["options","JsVar",["An optional structure containing extra information on initialising the serial port.","```{rx:pin,tx:pin,bytesize:8,parity:null/'none'/'o'/'odd'/'e'/'even',stopbits:1,flow:null/undefined/'none'/'xon'}```","You can find out which pins to use by looking at [your board's reference page](#boards) and searching for pins with the `UART`/`USART` markers.","Note that even after changing the RX and TX pins, if you have called setup before then the previous RX and TX pins will still be connected to the Serial port as well - until you set them to something else using digitalWrite"]]
]
}
Setup this Serial port with the given baud rate and options.
If not specified in options, the default pins are used (usually the lowest numbered pins on the lowest port that supports this peripheral)
*/
void jswrap_serial_setup(JsVar *parent, JsVar *baud, JsVar *options) {
IOEventFlags device = jsiGetDeviceFromClass(parent);
if (!DEVICE_IS_USART(device)) return;
JshUSARTInfo inf;
jshUSARTInitInfo(&inf);
if (jsvIsUndefined(options)) {
options = jsvObjectGetChild(parent, DEVICE_OPTIONS_NAME, 0);
} else
jsvLockAgain(options);
JsVar *parity = 0;
JsVar *flow = 0;
jsvConfigObject configs[] = {
{"rx", JSV_PIN, &inf.pinRX},
{"tx", JSV_PIN, &inf.pinTX},
{"ck", JSV_PIN, &inf.pinCK},
{"bytesize", JSV_INTEGER, &inf.bytesize},
{"stopbits", JSV_INTEGER, &inf.stopbits},
{"parity", JSV_OBJECT /* a variable */, &parity},
{"flow", JSV_OBJECT /* a variable */, &flow},
};
if (!jsvIsUndefined(baud)) {
int b = (int)jsvGetInteger(baud);
if (b<=100 || b > 10000000)
jsExceptionHere(JSET_ERROR, "Invalid baud rate specified");
else
inf.baudRate = b;
}
bool ok = true;
if (jsvReadConfigObject(options, configs, sizeof(configs) / sizeof(jsvConfigObject))) {
// sort out parity
inf.parity = 0;
if(jsvIsString(parity)) {
if (jsvIsStringEqual(parity, "o") || jsvIsStringEqual(parity, "odd"))
inf.parity = 1;
else if (jsvIsStringEqual(parity, "e") || jsvIsStringEqual(parity, "even"))
inf.parity = 2;
} else if (jsvIsInt(parity)) {
inf.parity = (unsigned char)jsvGetInteger(parity);
}
if (inf.parity>2) {
jsExceptionHere(JSET_ERROR, "Invalid parity %d", inf.parity);
ok = false;
}
if (ok) {
if (jsvIsUndefined(flow) || jsvIsNull(flow) || jsvIsStringEqual(flow, "none"))
inf.xOnXOff = false;
else if (jsvIsStringEqual(flow, "xon"))
inf.xOnXOff = true;
else {
jsExceptionHere(JSET_ERROR, "Invalid flow control: %q", flow);
ok = false;
}
}
#ifdef LINUX
if (ok && jsvIsObject(options))
jsvObjectSetChildAndUnLock(parent, "path", jsvObjectGetChild(options, "path", 0));
#endif
}
jsvUnLock(parity);
jsvUnLock(flow);
if (!ok) {
jsvUnLock(options);
return;
}
jshUSARTSetup(device, &inf);
// Set baud rate in object, so we can initialise it on startup
jsvObjectSetChildAndUnLock(parent, USART_BAUDRATE_NAME, jsvNewFromInteger(inf.baudRate));
// Do the same for options
if (options)
jsvObjectSetChildAndUnLock(parent, DEVICE_OPTIONS_NAME, options);
else
jsvRemoveNamedChild(parent, DEVICE_OPTIONS_NAME);
}
