static bool cmd_jtag_scan(target *t, int argc, char **argv)
{
(void)t;
uint8_t *irlens = NULL;
gdb_outf("Target voltage: %s\n", platform_target_voltage());
if (argc > 1) {
/* Accept a list of IR lengths on command line */
irlens = alloca(argc);
for (int i = 1; i < argc; i++)
irlens[i-1] = atoi(argv[i]);
irlens[argc-1] = 0;
}
int devs = jtag_scan(irlens);
if(devs < 0) {
gdb_out("JTAG device scan failed!\n");
return false;
}
if(devs == 0) {
gdb_out("JTAG scan found no devices!\n");
return false;
}
gdb_outf("Device IR Len IDCODE Description\n");
for(int i = 0; i < jtag_dev_count; i++)
gdb_outf("%d\t%d\t0x%08lX %s\n", i,
jtag_devs[i].ir_len, jtag_devs[i].idcode,
jtag_devs[i].descr);
gdb_out("\n");
cmd_targets(NULL);
return true;
}
int platform_init(void)
{
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_168MHZ]);
/* Enable peripherals */
rcc_peripheral_enable_clock(&RCC_AHB2ENR, RCC_AHB2ENR_OTGFSEN);
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPBEN);
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPCEN);
/* Fix all flaoting pins*/
gpio_mode_setup(GPIOA, GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN,
0x1ff);
gpio_mode_setup(GPIOB, GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN,
0xffe2);
gpio_mode_setup(GPIOC, GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN,
0xf3ff);
/* Set up USB Pins and alternate function*/
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE,
GPIO9 | GPIO10| GPIO11 | GPIO12);
gpio_set_af(GPIOA, GPIO_AF10, GPIO9 | GPIO10| GPIO11 | GPIO12);
/* Set TMS/TCK/TDI to high speed*/
GPIOA_OSPEEDR &=~0xfc00;
GPIOA_OSPEEDR |= 0xa800;
gpio_mode_setup(JTAG_PORT, GPIO_MODE_OUTPUT,
GPIO_PUPD_NONE,
TMS_PIN | TCK_PIN | TDI_PIN);
gpio_mode_setup(TDO_PORT, GPIO_MODE_INPUT,
GPIO_PUPD_NONE,
TDO_PIN | TRST_PIN);
gpio_mode_setup(LED_PORT, GPIO_MODE_OUTPUT,
GPIO_PUPD_NONE,
LED_UART );
/* Setup heartbeat timer */
systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8);
systick_set_reload(168000000/(10*8)); /* Interrupt us at 10 Hz */
SCB_SHPR(11) &= ~((15 << 4) & 0xff);
SCB_SHPR(11) |= ((14 << 4) & 0xff);
systick_interrupt_enable();
systick_counter_enable();
usbuart_init();
SCB_VTOR = 0x10000; // Relocate interrupt vector table here
cdcacm_init();
jtag_scan(NULL);
return 0;
}
int platform_init(void)
{
int err;
if(ftdic) {
ftdi_usb_close(ftdic);
ftdi_free(ftdic);
ftdic = NULL;
}
if((ftdic = ftdi_new()) == NULL) {
fprintf(stderr, "ftdi_new: %s\n",
ftdi_get_error_string(ftdic));
abort();
}
if((err = ftdi_set_interface(ftdic, INTERFACE_A)) != 0) {
fprintf(stderr, "ftdi_set_interface: %d: %s\n",
err, ftdi_get_error_string(ftdic));
abort();
}
if((err = ftdi_usb_open(ftdic, FT2232_VID, FT2232_PID)) != 0) {
fprintf(stderr, "unable to open ftdi device: %d (%s)\n",
err, ftdi_get_error_string(ftdic));
abort();
}
if((err = ftdi_set_latency_timer(ftdic, 1)) != 0) {
fprintf(stderr, "ftdi_set_latency_timer: %d: %s\n",
err, ftdi_get_error_string(ftdic));
abort();
}
if((err = ftdi_set_baudrate(ftdic, 1000000)) != 0) {
fprintf(stderr, "ftdi_set_baudrate: %d: %s\n",
err, ftdi_get_error_string(ftdic));
abort();
}
if((err = ftdi_usb_purge_buffers(ftdic)) != 0) {
fprintf(stderr, "ftdi_set_baudrate: %d: %s\n",
err, ftdi_get_error_string(ftdic));
abort();
}
if((err = ftdi_write_data_set_chunksize(ftdic, BUF_SIZE)) != 0) {
fprintf(stderr, "ftdi_write_data_set_chunksize: %d: %s\n",
err, ftdi_get_error_string(ftdic));
abort();
}
assert(gdb_if_init() == 0);
jtag_scan(NULL);
return 0;
}
static bool cmd_jtag_scan(target *t, int argc, char **argv)
{
(void)t;
uint8_t irlens[argc];
gdb_outf("Target voltage: %s\n", platform_target_voltage());
if (argc > 1) {
/* Accept a list of IR lengths on command line */
for (int i = 1; i < argc; i++)
irlens[i-1] = atoi(argv[i]);
irlens[argc-1] = 0;
}
if(connect_assert_srst)
platform_srst_set_val(true); /* will be deasserted after attach */
int devs = -1;
volatile struct exception e;
TRY_CATCH (e, EXCEPTION_ALL) {
devs = jtag_scan(argc > 1 ? irlens : NULL);
}
int platform_init(void)
{
uint32_t data;
rcc_clock_setup_in_hse_8mhz_out_72mhz();
/* Enable peripherals */
rcc_periph_clock_enable(RCC_USB);
rcc_periph_clock_enable(RCC_GPIOA);
rcc_periph_clock_enable(RCC_GPIOB);
rcc_periph_clock_enable(RCC_AFIO);
rcc_periph_clock_enable(RCC_CRC);
/* Unmap JTAG Pins so we can reuse as GPIO */
data = AFIO_MAPR;
data &= ~AFIO_MAPR_SWJ_MASK;
data |= AFIO_MAPR_SWJ_CFG_JTAG_OFF_SW_OFF;
AFIO_MAPR = data;
/* Setup JTAG GPIO ports */
gpio_set_mode(TMS_PORT, GPIO_MODE_OUTPUT_10_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, TMS_PIN);
gpio_set_mode(TCK_PORT, GPIO_MODE_OUTPUT_10_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, TCK_PIN);
gpio_set_mode(TDI_PORT, GPIO_MODE_OUTPUT_10_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, TDI_PIN);
gpio_set_mode(TDO_PORT, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_FLOAT, TDO_PIN);
gpio_set(NRST_PORT,NRST_PIN);
gpio_set_mode(NRST_PORT, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_PULL_UPDOWN, NRST_PIN);
gpio_set_mode(LED_PORT, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, led_idle_run);
/* Remap TIM2 TIM2_REMAP[1]
* TIM2_CH1_ETR -> PA15 (TDI, set as output above)
* TIM2_CH2 -> PB3 (TDO)
*/
data = AFIO_MAPR;
data &= ~AFIO_MAPR_TIM2_REMAP_FULL_REMAP;
data |= AFIO_MAPR_TIM2_REMAP_PARTIAL_REMAP1;
AFIO_MAPR = data;
/* Setup heartbeat timer */
systick_set_clocksource(STK_CSR_CLKSOURCE_AHB_DIV8);
systick_set_reload(900000); /* Interrupt us at 10 Hz */
SCB_SHPR(11) &= ~((15 << 4) & 0xff);
SCB_SHPR(11) |= ((14 << 4) & 0xff);
systick_interrupt_enable();
systick_counter_enable();
usbuart_init();
SCB_VTOR = 0x2000; // Relocate interrupt vector table here
cdcacm_init();
// Set recovery point
if (setjmp(fatal_error_jmpbuf)) {
return 0; // Do nothing on failure
}
jtag_scan(NULL);
return 0;
}
static void do_jtag_scan(void *user)
{
user; /* suppress warning */
jtag_scan(buf, jtag_bits, jtag_last);
}
