/**
* hrtimer_start - (re)start an relative timer on the current CPU
* @timer: the timer to be added
* @tim: expiry time
* @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
*
* Returns:
* 0 on success
* 1 when the timer was active
*/
int
hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
int ret, raise;
base = lock_hrtimer_base(timer, &flags);
/* Remove an active timer from the queue: */
ret = remove_hrtimer(timer, base);
/* Switch the timer base, if necessary: */
new_base = switch_hrtimer_base(timer, base);
if (mode == HRTIMER_MODE_REL) {
tim = ktime_add_safe(tim, new_base->get_time());
/*
* CONFIG_TIME_LOW_RES is a temporary way for architectures
* to signal that they simply return xtime in
* do_gettimeoffset(). In this case we want to round up by
* resolution when starting a relative timer, to avoid short
* timeouts. This will go away with the GTOD framework.
*/
#ifdef CONFIG_TIME_LOW_RES
tim = ktime_add_safe(tim, base->resolution);
#endif
}
timer->expires = tim;
timer_stats_hrtimer_set_start_info(timer);
/*
* Only allow reprogramming if the new base is on this CPU.
* (it might still be on another CPU if the timer was pending)
*/
enqueue_hrtimer(timer, new_base,
new_base->cpu_base == &__get_cpu_var(hrtimer_bases));
/*
* The timer may be expired and moved to the cb_pending
* list. We can not raise the softirq with base lock held due
* to a possible deadlock with runqueue lock.
*/
raise = timer->state == HRTIMER_STATE_PENDING;
unlock_hrtimer_base(timer, &flags);
if (raise)
hrtimer_raise_softirq();
return ret;
}
/**
* hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
* @timer: the timer to be added
* @tim: expiry time
* @delta_ns: "slack" range for the timer
* @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or
* relative (HRTIMER_MODE_REL)
*/
void hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
unsigned long delta_ns, const enum hrtimer_mode mode)
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
int leftmost;
base = lock_hrtimer_base(timer, &flags);
/* Remove an active timer from the queue: */
remove_hrtimer(timer, base, true);
if (mode & HRTIMER_MODE_REL) {
tim = ktime_add_safe(tim, base->get_time());
/*
* CONFIG_TIME_LOW_RES is a temporary way for architectures
* to signal that they simply return xtime in
* do_gettimeoffset(). In this case we want to round up by
* resolution when starting a relative timer, to avoid short
* timeouts. This will go away with the GTOD framework.
*/
#ifdef CONFIG_TIME_LOW_RES
tim = ktime_add_safe(tim, ktime_set(0, hrtimer_resolution));
#endif
}
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
/* Switch the timer base, if necessary: */
new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
timer_stats_hrtimer_set_start_info(timer);
leftmost = enqueue_hrtimer(timer, new_base);
if (!leftmost)
goto unlock;
if (!hrtimer_is_hres_active(timer)) {
/*
* Kick to reschedule the next tick to handle the new timer
* on dynticks target.
*/
if (new_base->cpu_base->nohz_active)
wake_up_nohz_cpu(new_base->cpu_base->cpu);
} else {
hrtimer_reprogram(timer, new_base);
}
unlock:
unlock_hrtimer_base(timer, &flags);
}
int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
unsigned long delta_ns, const enum hrtimer_mode mode,
int wakeup)
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
int ret, leftmost;
base = lock_hrtimer_base(timer, &flags);
/* Remove an active timer from the queue: */
ret = remove_hrtimer(timer, base);
/* Switch the timer base, if necessary: */
new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
if (mode & HRTIMER_MODE_REL) {
tim = ktime_add_safe(tim, new_base->get_time());
/*
* CONFIG_TIME_LOW_RES is a temporary way for architectures
* to signal that they simply return xtime in
* do_gettimeoffset(). In this case we want to round up by
* resolution when starting a relative timer, to avoid short
* timeouts. This will go away with the GTOD framework.
*/
#ifdef CONFIG_TIME_LOW_RES
tim = ktime_add_safe(tim, base->resolution);
#endif
}
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
timer_stats_hrtimer_set_start_info(timer);
leftmost = enqueue_hrtimer(timer, new_base);
/*
* Only allow reprogramming if the new base is on this CPU.
* (it might still be on another CPU if the timer was pending)
*
* XXX send_remote_softirq() ?
*/
if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases))
hrtimer_enqueue_reprogram(timer, new_base, wakeup);
unlock_hrtimer_base(timer, &flags);
return ret;
}
asmlinkage long compat_sys_futex(u32 __user *uaddr, int op, u32 val,
struct compat_timespec __user *utime, u32 __user *uaddr2,
u32 val3)
{
struct timespec ts;
ktime_t t, *tp = NULL;
int val2 = 0;
int cmd = op & FUTEX_CMD_MASK;
if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI ||
cmd == FUTEX_WAIT_BITSET ||
cmd == FUTEX_WAIT_REQUEUE_PI)) {
if (get_compat_timespec(&ts, utime))
return -EFAULT;
if (!timespec_valid(&ts))
return -EINVAL;
t = timespec_to_ktime(ts);
if (cmd == FUTEX_WAIT)
t = ktime_add_safe(ktime_get(), t);
tp = &t;
}
if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE ||
cmd == FUTEX_CMP_REQUEUE_PI || cmd == FUTEX_WAKE_OP)
val2 = (int) (unsigned long) utime;
return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
}
/**
* hrtimer_forward - forward the timer expiry
* @timer: hrtimer to forward
* @now: forward past this time
* @interval: the interval to forward
*
* Forward the timer expiry so it will expire in the future.
* Returns the number of overruns.
*/
u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
{
u64 orun = 1;
ktime_t delta;
delta = ktime_sub(now, timer->expires);
if (delta.tv64 < 0)
return 0;
if (interval.tv64 < timer->base->resolution.tv64)
interval.tv64 = timer->base->resolution.tv64;
if (unlikely(delta.tv64 >= interval.tv64)) {
s64 incr = ktime_to_ns(interval);
orun = ktime_divns(delta, incr);
timer->expires = ktime_add_ns(timer->expires, incr * orun);
if (timer->expires.tv64 > now.tv64)
return orun;
/*
* This (and the ktime_add() below) is the
* correction for exact:
*/
orun++;
}
timer->expires = ktime_add_safe(timer->expires, interval);
return orun;
}
int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
unsigned long delta_ns, const enum hrtimer_mode mode,
int wakeup)
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
int ret, leftmost;
base = lock_hrtimer_base(timer, &flags);
ret = remove_hrtimer(timer, base);
new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
if (mode & HRTIMER_MODE_REL) {
tim = ktime_add_safe(tim, new_base->get_time());
#ifdef CONFIG_TIME_LOW_RES
tim = ktime_add_safe(tim, base->resolution);
#endif
}
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
timer_stats_hrtimer_set_start_info(timer);
leftmost = enqueue_hrtimer(timer, new_base);
if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)
&& hrtimer_enqueue_reprogram(timer, new_base)) {
if (wakeup) {
raw_spin_unlock(&new_base->cpu_base->lock);
raise_softirq_irqoff(HRTIMER_SOFTIRQ);
local_irq_restore(flags);
return ret;
} else {
__raise_softirq_irqoff(HRTIMER_SOFTIRQ);
}
}
unlock_hrtimer_base(timer, &flags);
return ret;
}
static bool dm_old_request_peeked_before_merge_deadline(struct mapped_device *md)
{
ktime_t kt_deadline;
if (!md->seq_rq_merge_deadline_usecs)
return false;
kt_deadline = ns_to_ktime((u64)md->seq_rq_merge_deadline_usecs * NSEC_PER_USEC);
kt_deadline = ktime_add_safe(md->last_rq_start_time, kt_deadline);
return !ktime_after(ktime_get(), kt_deadline);
}
static inline ktime_t hrtimer_update_lowres(struct hrtimer *timer, ktime_t tim,
const enum hrtimer_mode mode)
{
#ifdef CONFIG_TIME_LOW_RES
/*
* CONFIG_TIME_LOW_RES indicates that the system has no way to return
* granular time values. For relative timers we add hrtimer_resolution
* (i.e. one jiffie) to prevent short timeouts.
*/
timer->is_rel = mode & HRTIMER_MODE_REL;
if (timer->is_rel)
tim = ktime_add_safe(tim, ktime_set(0, hrtimer_resolution));
#endif
return tim;
}
/**
* hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
* @timer: the timer to be added
* @tim: expiry time
* @delta_ns: "slack" range for the timer
* @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or
* relative (HRTIMER_MODE_REL)
*/
void hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
u64 delta_ns, const enum hrtimer_mode mode)
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
int leftmost;
base = lock_hrtimer_base(timer, &flags);
/* Remove an active timer from the queue: */
remove_hrtimer(timer, base, true);
if (mode & HRTIMER_MODE_REL)
tim = ktime_add_safe(tim, base->get_time());
tim = hrtimer_update_lowres(timer, tim, mode);
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
/* Switch the timer base, if necessary: */
new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
timer_stats_hrtimer_set_start_info(timer);
leftmost = enqueue_hrtimer(timer, new_base);
if (!leftmost)
goto unlock;
if (!hrtimer_is_hres_active(timer)) {
/*
* Kick to reschedule the next tick to handle the new timer
* on dynticks target.
*/
if (new_base->cpu_base->nohz_active)
wake_up_nohz_cpu(new_base->cpu_base->cpu);
} else {
hrtimer_reprogram(timer, new_base);
}
unlock:
unlock_hrtimer_base(timer, &flags);
}
int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
unsigned long delta_ns, const enum hrtimer_mode mode,
int wakeup)
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
int ret, leftmost;
/*add MTK debug log for ALPS01804694*/
if(timer->function == NULL) {
pr_alert("add hrtimer but do nothing");
dump_stack();
}
base = lock_hrtimer_base(timer, &flags);
/* Remove an active timer from the queue: */
ret = remove_hrtimer(timer, base);
if (mode & HRTIMER_MODE_REL) {
tim = ktime_add_safe(tim, base->get_time());
/*
* CONFIG_TIME_LOW_RES is a temporary way for architectures
* to signal that they simply return xtime in
* do_gettimeoffset(). In this case we want to round up by
* resolution when starting a relative timer, to avoid short
* timeouts. This will go away with the GTOD framework.
*/
#ifdef CONFIG_TIME_LOW_RES
tim = ktime_add_safe(tim, base->resolution);
#endif
}
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
/* Switch the timer base, if necessary: */
new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
timer_stats_hrtimer_set_start_info(timer);
leftmost = enqueue_hrtimer(timer, new_base);
/*
* Only allow reprogramming if the new base is on this CPU.
* (it might still be on another CPU if the timer was pending)
*
* XXX send_remote_softirq() ?
*/
if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)
&& hrtimer_enqueue_reprogram(timer, new_base)) {
if (wakeup) {
/*
* We need to drop cpu_base->lock to avoid a
* lock ordering issue vs. rq->lock.
*/
raw_spin_unlock(&new_base->cpu_base->lock);
raise_softirq_irqoff(HRTIMER_SOFTIRQ);
local_irq_restore(flags);
return ret;
} else {
__raise_softirq_irqoff(HRTIMER_SOFTIRQ);
}
}
unlock_hrtimer_base(timer, &flags);
return ret;
}
