int lcd_enable(void)
{
//debug("%s\n", __FUNCTION__);
//lcd_setup_gama_table(&tcon_config);
/* aml_8726m_bl_init();
lcd_io_init();
tcon_probe();
osd_init_hw();
osd_hw_setup();
*/
mdelay(10);
// power_off_backlight();
lcd_setup_gama_table(&tcon_config);
//t13_io_init();
lcd_io_init();
tcon_probe();
osd_init_hw();
osd_hw_setup();
//video_dac_disable();
// power_on_lcd();
// power_on_backlight(); //disable when required power sequence.
return 0;
}
void set_lcd_info(struct rk29fb_screen *screen, struct rk29lcd_info *lcd_info )
{
/* screen type & face */
screen->type = SCREEN_TYPE;
screen->face = OUT_FACE;
/* Screen size */
screen->x_res = H_VD;
screen->y_res = V_VD;
screen->width = LCD_WIDTH;
screen->height = LCD_HEIGHT;
/* Timing */
screen->lcdc_aclk = LCDC_ACLK;
screen->pixclock = DCLK;
screen->left_margin = H_BP;
screen->right_margin = H_FP;
screen->hsync_len = H_PW;
screen->upper_margin = V_BP;
screen->lower_margin = V_FP;
screen->vsync_len = V_PW;
/* Pin polarity */
screen->pin_hsync = 0;
screen->pin_vsync = 0;
screen->pin_den = 0;
screen->pin_dclk = DCLK_POL;
screen->pin_den = DEN_POL;
/* Swap rule */
screen->swap_rb = 0;
screen->swap_rg = 0;
screen->swap_gb = 0;
screen->swap_delta = 0;
screen->swap_dumy = 0;
/* Operation function*/
screen->init = lcd_init;
screen->standby = lcd_standby;
if(lcd_info)
gLcd_info = lcd_info;
lcd_io_init();
dsi_probe_current_chip();
}
int lcd_enable(void)
{
sn7325_init();
lcd_setup_gama_table(&tcon_config);
aml_8726m_bl_init();
lcd_io_init();
tcon_probe();
osd_init_hw();
osd_hw_setup();
return 0;
}
void set_lcd_info(struct rk29fb_screen *screen, struct rk29lcd_info *lcd_info )
{
#if defined(RK_USE_SCREEN_ID)
set_lcd_info_by_id(screen,lcd_info);
#else
#if defined(CONFIG_MACH_RK_FAC)
screen->type = lcd_param[OUT_TYPE_INDEX];
screen->face = lcd_param[OUT_FACE_INDEX];
screen->lvds_format = lcd_param[LVDS_FORMAT_INDEX]; //lvds data format
screen->x_res = lcd_param[H_VD_INDEX];
screen->y_res = lcd_param[V_VD_INDEX];
screen->width = lcd_param[LCD_WIDTH_INDEX];
screen->height = lcd_param[LCD_HEIGHT_INDEX];
screen->lcdc_aclk = lcd_param[LCDC_ACLK_INDEX];
screen->pixclock = lcd_param[OUT_CLK_INDEX];
screen->left_margin = lcd_param[H_BP_INDEX];
screen->right_margin = lcd_param[H_FP_INDEX];
screen->hsync_len = lcd_param[H_PW_INDEX];
screen->upper_margin = lcd_param[V_BP_INDEX];
screen->lower_margin = lcd_param[V_FP_INDEX];
screen->vsync_len = lcd_param[V_PW_INDEX];
screen->pin_hsync = HSYNC_POL; //Pin polarity
screen->pin_vsync = VSYNC_POL;
screen->pin_den = DEN_POL;
screen->pin_dclk = lcd_param[DCLK_POL_INDEX];
screen->swap_rb = lcd_param[SWAP_RB_INDEX];
screen->swap_rg = SWAP_RG;
screen->swap_gb = SWAP_GB;
screen->swap_delta = 0;
screen->swap_dumy = 0;
#else // if not defined (CONFIG_MACH_RK_FAC)
screen->type = SCREEN_TYPE;
screen->face = OUT_FACE;
screen->lvds_format = LVDS_FORMAT; //lvds data format
screen->x_res = H_VD; //screen resolution
screen->y_res = V_VD;
screen->width = LCD_WIDTH;
screen->height = LCD_HEIGHT;
screen->lcdc_aclk = LCDC_ACLK; // Timing
screen->pixclock = DCLK;
screen->left_margin = H_BP;
screen->right_margin = H_FP;
screen->hsync_len = H_PW;
screen->upper_margin = V_BP;
screen->lower_margin = V_FP;
screen->vsync_len = V_PW;
screen->pin_hsync = HSYNC_POL; //Pin polarity
screen->pin_vsync = VSYNC_POL;
screen->pin_den = DEN_POL;
screen->pin_dclk = DCLK_POL;
screen->swap_rb = SWAP_RB; // Swap rule
screen->swap_rg = SWAP_RG;
screen->swap_gb = SWAP_GB;
screen->swap_delta = 0;
screen->swap_dumy = 0;
#endif // (CONFIG_MACH_RK_FAC)
#if defined(CONFIG_MIPI_DSI)
/* MIPI DSI */
#if defined(MIPI_DSI_LANE)
screen->dsi_lane = MIPI_DSI_LANE;
#else
screen->dsi_lane = 4;
#endif
//screen->dsi_video_mode = MIPI_DSI_VIDEO_MODE;
#if defined(MIPI_DSI_HS_CLK)
screen->hs_tx_clk = MIPI_DSI_HS_CLK;
#else
screen->hs_tx_clk = 1000000000; //1GHz
#endif
#endif
/* Operation function*/
#if defined(RK_SCREEN_INIT) //some screen need to init by spi or i2c
screen->init = rk_lcd_init;
screen->standby = rk_lcd_standby;
if(lcd_info)
gLcd_info = lcd_info;
#endif
#if defined(USE_RK_DSP_LUT)
screen->dsp_lut = dsp_lut;
#endif
#if defined(CONFIG_ONE_LCDC_DUAL_OUTPUT_INF)
screen->sscreen_get = set_scaler_info;
#endif
msleep(100);
#if defined(CONFIG_MIPI_DSI)
lcd_io_init();
msleep(200);
dsi_probe_current_chip();
msleep(100);
#endif
#endif
}
