// print usage/help message
void usage()
{
printf("packetizer_example [options]\n");
printf(" u/h : print usage\n");
printf(" n : input data size (number of uncoded bytes): 8 default\n");
printf(" v : data integrity check: crc32 default\n");
liquid_print_crc_schemes();
printf(" c : coding scheme (inner): h74 default\n");
printf(" k : coding scheme (outer): none default\n");
liquid_print_fec_schemes();
}
// print usage/help message
void usage()
{
printf("simulate_per_test options:\n");
printf(" u/h : print usage\n");
printf(" n : number of decoded bytes, default: 1024\n");
printf(" m : modulation scheme, default: psk\n");
liquid_print_modulation_schemes();
printf(" c : coding scheme (inner), default: h74\n");
printf(" k : coding scheme (outer), default: none\n");
liquid_print_fec_schemes();
printf(" S/H : soft/hard decoding: default: hard\n");
}
void usage()
{
printf("flexframesync_example [options]\n");
printf(" u/h : print usage\n");
printf(" s : signal-to-noise ratio [dB], default: 20\n");
printf(" F : carrier frequency offset, default: 0.01\n");
printf(" n : payload length [bytes], default: 120\n");
printf(" m : modulation scheme (qpsk default)\n");
liquid_print_modulation_schemes();
printf(" v : data integrity check: crc32 default\n");
liquid_print_crc_schemes();
printf(" c : coding scheme (inner): h74 default\n");
printf(" k : coding scheme (outer): none default\n");
liquid_print_fec_schemes();
printf(" d : enable debugging\n");
}
// print usage/help message
void usage()
{
printf("generate_per_data options:\n");
printf(" u/h : print usage\n");
printf(" v|q : verbose|quiet, default: verbose\n");
printf(" B|P : simulate for BER|PER, default: PER\n");
printf(" s|e : estimate SNR|Eb/N0, default: SNR\n");
printf(" S|H : soft/hard decoding, default: hard\n");
printf(" E : target error rate, default: 0.05\n");
printf(" n : frame length [bytes], default: 1024\n");
//printf(" m : minimum number of errors\n");
//printf(" t : minimum number of trials\n");
printf(" x : maximum number of trials, default: 10,000 (BER) or 100 (PER)\n");
printf(" c : coding scheme: h74 default\n");
liquid_print_fec_schemes();
printf(" m : modulation scheme (qpsk default)\n");
liquid_print_modulation_schemes();
}
void usage()
{
printf("ofdmflexframesync_example [options]\n");
printf(" -h : print usage\n");
printf(" -s <snr> : signal-to-noise ratio [dB], default: 20\n");
printf(" -F <freq> : carrier frequency offset, default: 0.002\n");
printf(" -M <num> : number of subcarriers (must be even), default: 64\n");
printf(" -C <len> : cyclic prefix length, default: 16\n");
printf(" -n <len> : payload length [bytes], default: 120\n");
printf(" -m <mod> : modulation scheme (qpsk default)\n");
liquid_print_modulation_schemes();
printf(" -v <crc> : data integrity check: crc32 default\n");
liquid_print_crc_schemes();
printf(" -c <fec> : coding scheme (inner): h74 default\n");
printf(" -k <fec> : coding scheme (outer): none default\n");
liquid_print_fec_schemes();
printf(" -d : enable debugging\n");
}
void usage()
{
printf("ofdmflexframesync_example [options]\n");
printf(" u/h : print usage\n");
printf(" s : signal-to-noise ratio [dB], default: 30\n");
printf(" F : carrier frequency offset, default: 0.002\n");
printf(" M : number of subcarriers (must be even), default: 64\n");
printf(" C : cyclic prefix length, default: 16\n");
printf(" n : payload length [bytes], default: 120\n");
printf(" m : modulation scheme (qpsk default)\n");
liquid_print_modulation_schemes();
printf(" v : data integrity check: crc32 default\n");
liquid_print_crc_schemes();
printf(" c : coding scheme (inner): h74 default\n");
printf(" k : coding scheme (outer): none default\n");
liquid_print_fec_schemes();
printf(" d : enable debugging\n");
}
void usage()
{
printf("flexframesync_sim\n");
printf(" Simulates the flexframesync object and observes the\n");
printf(" probability of properly receiving a packet based on\n");
printf(" the encoding scheme vs. SNR.\n");
printf("options:\n");
printf(" u/h : print usage/help\n");
printf(" o : output filename\n");
printf(" s : SNR start [dB], -9\n");
printf(" d : SNR step [dB], 1.0\n");
printf(" x : SNR max [dB], 10\n");
printf(" n : number of trials, 800\n");
printf(" f : frame bytes (packet len), 16\n");
printf(" m : mod scheme, default: qpsk\n");
liquid_print_modulation_schemes();
printf(" c : fec coding scheme (inner), default: none\n");
printf(" k : fec coding scheme (outer), default: none\n");
liquid_print_fec_schemes();
}
void usage()
{
printf("ofdmflexframesync_sim\n");
printf(" Simulates the ofdmflexframesync object and observes the\n");
printf(" probability of properly receiving a packet based on\n");
printf(" the encoding scheme vs. SNR.\n");
printf("options:\n");
printf(" u/h : print usage/help\n");
printf(" o : output filename\n");
printf(" s : SNR start [dB], -5\n");
printf(" d : SNR step [dB], 1.0\n");
printf(" x : SNR max [dB], 10\n");
printf(" n : number of trials, 1000\n");
printf(" f : frame bytes (packet len), 256\n");
printf(" M : number of subcarriers (must be even), default: 64\n");
printf(" C : cyclic prefix length, default: 16\n");
printf(" m : mod scheme, default: qpsk\n");
liquid_print_modulation_schemes();
printf(" c : fec coding scheme (inner), default: h128\n");
printf(" k : fec coding scheme (outer), default: none\n");
liquid_print_fec_schemes();
}
void LiquidOfdmModComponent::initialize()
{
// print capabilities of liquid
if (debug_x) {
liquid_print_modulation_schemes();
liquid_print_fec_schemes();
liquid_print_crc_schemes();
}
// initialize subcarrier allocation
unsigned char p[noSubcarriers_x];
ofdmframe_init_default_sctype(noSubcarriers_x, p);
// create frame generator properties object and initialize to default
ofdmflexframegenprops_s fgProps;
ofdmflexframegenprops_init_default(&fgProps);
modulation_scheme ms = liquid_getopt_str2mod(modulationScheme_x.c_str());
fec_scheme fec0 = liquid_getopt_str2fec(fecZero_x.c_str());
fec_scheme fec1 = liquid_getopt_str2fec(fecOne_x.c_str());
crc_scheme check = liquid_getopt_str2crc(crcScheme_x.c_str());
fgProps.mod_scheme = ms;
fgProps.fec0 = fec0;
fgProps.fec1 = fec1;
fgProps.check = check;
gain_factor_ = powf(10.0f, gain_x/20.0f);
// create frame generator object
try {
frameGenerator_ = ofdmflexframegen_create(noSubcarriers_x, cyclicPrefixLength_x, taperLength_x, p, &fgProps);
ofdmflexframegen_print(frameGenerator_);
}
catch(...)
{
LOG(LERROR) << "Unexpected exception caught during frame generator generation";
}
}
