static int complete_cmdv(int argc, char * const argv[], char last_char,
int maxv, char *cmdv[])
{
#ifdef CONFIG_CMDLINE
return complete_subcmdv(ll_entry_start(cmd_tbl_t, cmd),
ll_entry_count(cmd_tbl_t, cmd), argc, argv,
last_char, maxv, cmdv);
#else
return 0;
#endif
}
static int initr_manual_reloc_cmdtable(void)
{
fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
ll_entry_count(cmd_tbl_t, cmd));
return 0;
}
void board_init_f(ulong bootflag)
{
bd_t *bd;
init_fnc_t **init_fnc_ptr;
int j;
#ifndef CONFIG_SYS_NO_FLASH
ulong flash_size;
#endif
gd = (gd_t *) (CONFIG_SYS_GBL_DATA_OFFSET);
/* Clear initial global data */
memset((void *)gd, 0, sizeof(gd_t));
gd->bd = (bd_t *) (gd + 1); /* At end of global data */
gd->baudrate = CONFIG_BAUDRATE;
gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
bd = gd->bd;
bd->bi_memstart = CONFIG_SYS_RAM_BASE;
bd->bi_memsize = CONFIG_SYS_RAM_SIZE;
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
#if defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
#endif
bd->bi_baudrate = CONFIG_BAUDRATE;
bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
gd->reloc_off = CONFIG_SYS_RELOC_MONITOR_BASE - CONFIG_SYS_MONITOR_BASE;
for (init_fnc_ptr = init_sequence, j = 0; *init_fnc_ptr;
++init_fnc_ptr, j++) {
#ifdef DEBUG_INIT_SEQUENCE
if (j > 9)
str_init_seq[9] = '0' + (j / 10);
str_init_seq[10] = '0' + (j - (j / 10) * 10);
serial_puts(str_init_seq);
#endif
if ((*init_fnc_ptr + gd->reloc_off) () != 0) {
hang();
}
}
#ifdef DEBUG_INIT_SEQUENCE
serial_puts(str_init_seq_done);
#endif
/*
* Now that we have DRAM mapped and working, we can
* relocate the code and continue running from DRAM.
*
* Reserve memory at end of RAM for (top down in that order):
* - kernel log buffer
* - protected RAM
* - LCD framebuffer
* - monitor code
* - board info struct
*/
#ifdef DEBUG_MEM_LAYOUT
printf("CONFIG_SYS_MONITOR_BASE: 0x%lx\n", CONFIG_SYS_MONITOR_BASE);
printf("CONFIG_ENV_ADDR: 0x%lx\n", CONFIG_ENV_ADDR);
printf("CONFIG_SYS_RELOC_MONITOR_BASE: 0x%lx (%d)\n", CONFIG_SYS_RELOC_MONITOR_BASE,
CONFIG_SYS_MONITOR_LEN);
printf("CONFIG_SYS_MALLOC_BASE: 0x%lx (%d)\n", CONFIG_SYS_MALLOC_BASE,
CONFIG_SYS_MALLOC_LEN);
printf("CONFIG_SYS_INIT_SP_OFFSET: 0x%lx (%d)\n", CONFIG_SYS_INIT_SP_OFFSET,
CONFIG_SYS_STACK_SIZE);
printf("CONFIG_SYS_PROM_OFFSET: 0x%lx (%d)\n", CONFIG_SYS_PROM_OFFSET,
CONFIG_SYS_PROM_SIZE);
printf("CONFIG_SYS_GBL_DATA_OFFSET: 0x%lx (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET,
GENERATED_GBL_DATA_SIZE);
#endif
#ifdef CONFIG_POST
post_bootmode_init();
post_run(NULL, POST_ROM | post_bootmode_get(0));
#endif
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/*
* We have to relocate the command table manually
*/
fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
#if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
puts("AMBA:\n");
do_ambapp_print(NULL, 0, 0, NULL);
#endif
/* initialize higher level parts of CPU like time base and timers */
cpu_init_r();
/* start timer */
timer_interrupt_init();
/*
* Enable Interrupts before any calls to udelay,
* the flash driver may use udelay resulting in
* a hang if not timer0 IRQ is enabled.
*/
interrupt_init();
/* The Malloc area is immediately below the monitor copy in RAM */
mem_malloc_init(CONFIG_SYS_MALLOC_BASE,
CONFIG_SYS_MALLOC_END - CONFIG_SYS_MALLOC_BASE);
#if !defined(CONFIG_SYS_NO_FLASH)
puts("Flash: ");
if ((flash_size = flash_init()) > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
print_size(flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
*
* NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
*/
if (getenv_yesno("flashchecksum") == 1) {
printf(" CRC: %08lX",
crc32(0, (const unsigned char *)CONFIG_SYS_FLASH_BASE,
flash_size)
);
}
putc('\n');
# else /* !CONFIG_SYS_FLASH_CHECKSUM */
print_size(flash_size, "\n");
# endif /* CONFIG_SYS_FLASH_CHECKSUM */
} else {
puts(failed);
hang();
}
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */
bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
#else
bd->bi_flashoffset = 0;
#endif
#else /* CONFIG_SYS_NO_FLASH */
bd->bi_flashsize = 0;
bd->bi_flashstart = 0;
bd->bi_flashoffset = 0;
#endif /* !CONFIG_SYS_NO_FLASH */
#ifdef CONFIG_SPI
# if !defined(CONFIG_ENV_IS_IN_EEPROM)
spi_init_f();
# endif
spi_init_r();
#endif
/* relocate environment function pointers etc. */
env_relocate();
#if defined(CONFIG_BOARD_LATE_INIT)
board_late_init();
#endif
#ifdef CONFIG_ID_EEPROM
mac_read_from_eeprom();
#endif
#if defined(CONFIG_PCI)
/*
* Do pci configuration
*/
pci_init();
#endif
/* Initialize stdio devices */
stdio_init();
/* Initialize the jump table for applications */
jumptable_init();
/* Initialize the console (after the relocation and devices init) */
console_init_r();
#ifdef CONFIG_STATUS_LED
status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
#endif
udelay(20);
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
WATCHDOG_RESET();
#if defined(CONFIG_CMD_DOC)
WATCHDOG_RESET();
puts("DOC: ");
doc_init();
#endif
#ifdef CONFIG_BITBANGMII
bb_miiphy_init();
#endif
#if defined(CONFIG_CMD_NET)
WATCHDOG_RESET();
puts("Net: ");
eth_initialize(bd);
#endif
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
WATCHDOG_RESET();
debug("Reset Ethernet PHY\n");
reset_phy();
#endif
#ifdef CONFIG_POST
post_run(NULL, POST_RAM | post_bootmode_get(0));
#endif
#if defined(CONFIG_CMD_IDE)
WATCHDOG_RESET();
puts("IDE: ");
ide_init();
#endif /* CONFIG_CMD_IDE */
#ifdef CONFIG_LAST_STAGE_INIT
WATCHDOG_RESET();
/*
* Some parts can be only initialized if all others (like
* Interrupts) are up and running (i.e. the PC-style ISA
* keyboard).
*/
last_stage_init();
#endif
#ifdef CONFIG_PS2KBD
puts("PS/2: ");
kbd_init();
#endif
prom_init();
/* main_loop */
for (;;) {
WATCHDOG_RESET();
main_loop();
}
}
static int do_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd);
const int len = ll_entry_count(cmd_tbl_t, cmd);
return _do_help(start, len, cmdtp, flag, argc, argv);
}
static int complete_cmdv(int argc, char * const argv[],
char last_char, int maxv, char *cmdv[])
{
cmd_tbl_t *cmdtp = ll_entry_start(cmd_tbl_t, cmd);
const int count = ll_entry_count(cmd_tbl_t, cmd);
const cmd_tbl_t *cmdend = cmdtp + count;
const char *p;
int len, clen;
int n_found = 0;
const char *cmd;
/* sanity? */
if (maxv < 2)
return -2;
cmdv[0] = NULL;
if (argc == 0) {
/* output full list of commands */
for (; cmdtp != cmdend; cmdtp++) {
if (n_found >= maxv - 2) {
cmdv[n_found] = "...";
break;
}
cmdv[n_found] = cmdtp->name;
}
cmdv[n_found] = NULL;
return n_found;
}
/* more than one arg or one but the start of the next */
if (argc > 1 || (last_char == '\0' || isblank(last_char))) {
cmdtp = find_cmd(argv[0]);
if (cmdtp == NULL || cmdtp->complete == NULL) {
cmdv[0] = NULL;
return 0;
}
return (*cmdtp->complete)(argc, argv, last_char, maxv, cmdv);
}
cmd = argv[0];
/*
* Some commands allow length modifiers (like "cp.b");
* compare command name only until first dot.
*/
p = strchr(cmd, '.');
if (p == NULL)
len = strlen(cmd);
else
len = p - cmd;
/* return the partial matches */
for (; cmdtp != cmdend; cmdtp++) {
clen = strlen(cmdtp->name);
if (clen < len)
continue;
if (memcmp(cmd, cmdtp->name, len) != 0)
continue;
/* too many! */
if (n_found >= maxv - 2) {
cmdv[n_found++] = "...";
break;
}
cmdv[n_found++] = cmdtp->name;
}
cmdv[n_found] = NULL;
return n_found;
}
cmd_tbl_t *find_cmd (const char *cmd)
{
cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd);
const int len = ll_entry_count(cmd_tbl_t, cmd);
return find_cmd_tbl(cmd, start, len);
}
void board_init_r(gd_t *new_gd, ulong dest_addr)
{
#ifndef CONFIG_ENV_IS_NOWHERE
extern char * env_name_spec;
#endif
bd_t *bd;
gd = new_gd;
bd = gd->bd;
gd->flags |= GD_FLG_RELOC;
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
/* Enable the MMU so that we can keep u-boot simple */
mmu_init_r(dest_addr);
board_early_init_r();
monitor_flash_len = _edata - _text;
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/*
* We have to relocate the command table manually
*/
fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
/* there are some other pointer constants we must deal with */
#ifndef CONFIG_ENV_IS_NOWHERE
env_name_spec += gd->reloc_off;
#endif
timer_init();
/* The malloc area is right below the monitor image in RAM */
mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN);
enable_interrupts();
bd->bi_flashstart = 0;
bd->bi_flashsize = 0;
bd->bi_flashoffset = 0;
#ifndef CONFIG_SYS_NO_FLASH
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
bd->bi_flashsize = flash_init();
bd->bi_flashoffset = (unsigned long)_edata - (unsigned long)_text;
if (bd->bi_flashsize)
display_flash_config();
#endif
if (bd->bi_dram[0].size)
display_dram_config();
gd->bd->bi_boot_params = malloc(CONFIG_SYS_BOOTPARAMS_LEN);
if (!gd->bd->bi_boot_params)
puts("WARNING: Cannot allocate space for boot parameters\n");
/* initialize environment */
env_relocate();
stdio_init();
jumptable_init();
console_init_r();
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
#ifdef CONFIG_BITBANGMII
bb_miiphy_init();
#endif
#if defined(CONFIG_CMD_NET)
puts("Net: ");
eth_initialize(gd->bd);
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
mmc_initialize(gd->bd);
#endif
for (;;) {
main_loop();
}
}
