/*******************************************************************************
*函数名称: Boot0_C_part
*函数原型：void Boot0_C_part( void )
*函数功能: Boot0中用C语言编写的部分的主流程
*入口参数: void
*返 回 值: void
*备 注:
*******************************************************************************/
void Boot0_C_part( void )
{
__u32 status;
__s32 dram_size;
int index = 0;
int ddr_aotu_scan = 0;
volatile unsigned int *reg_addr = 0;
// move_RW( );
clear_ZI( );
bias_calibration();
timer_init();
UART_open( BT0_head.prvt_head.uart_port, (void *)BT0_head.prvt_head.uart_ctrl, 24*1000*1000 );
//odt_status = check_odt(5);
if( BT0_head.prvt_head.enable_jtag )
{
jtag_init( (normal_gpio_cfg *)BT0_head.prvt_head.jtag_gpio );
}
msg("HELLO! BOOT0 is starting!\n");
print_version();
{
__u32 reg_val;
__u32 fel_flag;
fel_flag = *(volatile unsigned int *)(0x01f00000 + 0x108);
//print smp status.
index = 0;
while(index < 0x18)
{
reg_addr = (volatile unsigned int *)(0x01f00000 + 0x100 + index);
reg_val = *reg_addr;
*reg_addr = 0;
msg("reg_addr %x =%x\n", reg_addr, reg_val);
index+=0x4;
}
// reg_val = *(volatile unsigned int *)(0x01f00000 + 0x108);
// *(volatile unsigned int *)(0x01f00000 + 0x108) = 0;
// msg("fel_flag=%x\n", fel_flag);
if(fel_flag == 0x5AA5A55A)
{
msg("eraly jump fel\n");
pll_reset();
__msdelay(10);
jump_to( FEL_BASE );
}
}
mmu_system_init(EGON2_DRAM_BASE, 1 * 1024, EGON2_MMU_BASE);
mmu_enable();
//dram_size = init_DRAM(BT0_head.boot_head.platform[7]); // 初始化DRAM
//#ifdef CONFIG_SUN6I_FPGA
// ddr_aotu_scan = 1;
// msg("config fpga\n");
//#else
// ddr_aotu_scan = BT0_head.boot_head.platform[7];
// msg("not config fpga\n");
//#endif
ddr_aotu_scan = 0;
#ifdef DEBUG
{
int k;
for(k=0;k<16;k++)
{
msg("%x\n", BT0_head.prvt_head.dram_para[k]);
}
}
#endif
// msg("------------before------------\n");
// dram_para_display();
dram_size = init_DRAM(ddr_aotu_scan, (void *)BT0_head.prvt_head.dram_para);
if(dram_size)
{
mdfs_save_value((void *)BT0_head.prvt_head.dram_para);
msg("dram size =%d\n", dram_size);
}
else
{
msg("initializing SDRAM Fail.\n");
mmu_disable( );
pll_reset();
__msdelay(10);
jump_to( FEL_BASE );
}
// {
// __u32 reg_val;
//
// reg_val = *(volatile __u32 *)(0x1c20d20);
// *(volatile __u32 *)(0x1c20d20) = 0;
// msg("reg_val=%x, %x\n", reg_val, *(volatile __u32 *)(0x1c20d24));
// if(reg_val & 0x01)
// {
// mmu_disable( );
// jump_to( 0x40100000 );
// }
// }
// msg("------------end------------\n");
// dram_para_display();
#if SYS_STORAGE_MEDIA_TYPE == SYS_STORAGE_MEDIA_NAND_FLASH
status = load_Boot1_from_nand( ); // 载入Boot1
#elif SYS_STORAGE_MEDIA_TYPE == SYS_STORAGE_MEDIA_SPI_NOR_FLASH
status = load_boot1_from_spinor( ); // 载入Boot1
#elif SYS_STORAGE_MEDIA_TYPE == SYS_STORAGE_MEDIA_SD_CARD
status = load_boot1_from_sdmmc( (char *)BT0_head.prvt_head.storage_data ); // 载入boot1
#else
#error The storage media of Boot1 has not been defined.
#endif
msg("Ready to disable icache.\n");
mmu_disable( ); // disable instruction cache
if( status == OK )
{
// restart_watch_dog( ); // restart watch dog
//跳转boot1之前，把dram的大小写进去
//set_dram_size(dram_size );
//跳转之前，把所有的dram参数写到boot1中
set_dram_para((void *)&BT0_head.prvt_head.dram_para, dram_size);
msg("Succeed in loading Boot1.\n"
"Jump to Boot1.\n");
jump_to( BOOT1_BASE ); // 如果载入Boot1成功，跳转到Boot1处执行
}
else
{
// disable_watch_dog( ); // disable watch dog
msg("Fail in loading Boot1.\n"
"Jump to Fel.\n");
pll_reset();
__msdelay(10);
jump_to( FEL_BASE ); // 如果载入Boot1失败，将控制权交给Fel
}
}
int load_boot1(void)
{
//memcpy((void *)DRAM_PARA_STORE_ADDR, (void *)BT0_head.prvt_head.dram_para, SUNXI_DRAM_PARA_MAX * 4);
return load_boot1_from_spinor();
}
