Пример #1
0
static void cleanup(void)
{
    nplNotice("Exiting...\0");
    dump_stats();
    (void)lpqClose(ldmProdQueue);

    if (shm != NULL) {
       shmfifo_detach(shm);
       shmfifo_free(shm);

       shm = NULL;
    }
}
Пример #2
0
/**
 * Reads a NOAAPORT data stream, creates LDM data-products from the stream, and
 * inserts the data-products into an LDM product-queue.  The NOAAPORT data
 * stream can take the form of multicast UDP packets from (for example) a
 * Novra S300 DVB-S2 receiver or the standard input stream.
 *
 * Usage:
 *     noaaportIngester [-l <em>log</em>] [-n|-v|-x] [-q <em>queue</em>] [-u <em>n</em>] [-m <em>mcastAddr</em>] [-I <em>iface</em>] [-b <em>npages</em>]\n
 *
 * Where:
 * <dl>
 *      <dt>-b <em>npages</em></dt>
 *      <dd>Allocate \e npages pages of memory for the internal buffer.</dd>
 *
 *      <dt>-I <em>iface</em></dt>
 *      <dd>Listen for multicast packets on interface \e iface.</dd>
 *
 *      <dt>-l <em>log</em></dt>
 *      <dd>Log to file \e log. The default is to use the system logging daemon
 *      if the current process is a daemon; otherwise, the standard error
 *      stream is used.</dd>
 *
 *      <dt>-m <em>mcastAddr</em></dt>
 *      <dd>Use the multicast address \e mcastAddr. The default is to
 *      read from the standard input stream.</dd>
 *
 *      <dt>-n</dt>
 *      <dd>Log messages of level NOTE and higher priority. Each data-product
 *      will generate a log message.</dd>
 *
 *      <dt>-q <em>queue</em></dt>
 *      <dd>Use \e queue as the pathname of the LDM product-queue. The default
 *      is to use the default LDM pathname of the product-queue.</dd>
 *
 *      <dt>-u <em>n</em></dt>
 *      <dd>If logging is to the system logging daemon, then use facility 
 *      <b>local</b><em>n</em>. The default is to use the LDM facility.</dd>
 *
 *      <dt>-v</dt>
 *      <dd>Log messages of level INFO and higher priority.</dd>
 *
 *      <dt>-x</dt>
 *      <dd>Log messages of level DEBUG and higher priority.</dd>
 * </dl>
 *
 * If neither -n, -v, nor -x is specified, then logging will be restricted to
 * levels ERROR and WARN only.
 *
 * @retval 0 if successful.
 * @retval 1 if an error occurred. At least one error-message will be logged.
 */
int main(
    const int           argc,           /**< [in] Number of arguments */
    char* const         argv[])         /**< [in] Arguments */
{
    int                 status = 0;     /* default success */
    extern int          optind;
    extern int          opterr;
    int                 ch;
    const char* const   progName = ubasename(argv[0]);
    const char*         interface = NULL;
    int                 logmask = LOG_UPTO(LOG_WARNING);
    const unsigned      logOptions = LOG_CONS | LOG_PID;
    const char*         mcastSpec = NULL;
    const char*         prodQueuePath = NULL;
    size_t              npages = DEFAULT_NPAGES;
    Fifo*               fifo;
    int                 ttyFd = open("/dev/tty", O_RDONLY);
    int                 processPriority = 0;
    const char*         logPath = (-1 == ttyFd)
        ? NULL                          /* log to system logging daemon */
        : "-";                          /* log to standard error stream */

    (void)close(ttyFd);
    (void)setulogmask(logmask);

    status = initLogging(progName, logOptions, logFacility, logPath);
    opterr = 0;                         /* no error messages from getopt(3) */

    while (0 == status && (ch = getopt(argc, argv, "b:I:l:m:np:q:u:vx")) != -1)
    {
        switch (ch) {
            extern char*    optarg;
            extern int      optopt;

            case 'b': {
                unsigned long   n;

                if (sscanf(optarg, "%lu", &n) != 1) {
                    NPL_SERROR1("Couldn't decode FIFO size in pages: \"%s\"",
                            optarg);
                    status = 1;
                }
                else {
                    npages = n;
                }
            }
            case 'I':
                interface = optarg;
                break;
            case 'l':
                logPath = optarg;
                status = initLogging(progName, logOptions, logFacility,
                        logPath);
                break;
            case 'm':
                mcastSpec = optarg;
                break;
            case 'n':
                logmask |= LOG_MASK(LOG_NOTICE);
                (void)setulogmask(logmask);
                break;
            case 'p': {
                char* cp;

                errno = 0;
                processPriority = (int)strtol(optarg, &cp, 0);

                if (0 != errno) {
                    NPL_SERROR1("Couldn't decode priority \"%s\"", optarg);
                    nplLog(LOG_ERR);
                }
                else {
                    if (processPriority < -20)
                        processPriority = -20;
                    else if (processPriority > 20)
                        processPriority = 20;
                }

                break;
            }
            case 'q':
                prodQueuePath = optarg;
                break;
            case 'u': {
                int         i = atoi(optarg);

                if (0 > i || 7 < i) {
                    NPL_START1("Invalid logging facility number: %d", i);
                    status = 1;
                }
                else {
                    static int  logFacilities[] = {LOG_LOCAL0, LOG_LOCAL1,
                        LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4, LOG_LOCAL5,
                        LOG_LOCAL6, LOG_LOCAL7};

                    logFacility = logFacilities[i];

                    status = initLogging(progName, logOptions, logFacility,
                            logPath);
                }

                break;
            }
            case 'v':
                logmask |= LOG_MASK(LOG_INFO);
                (void)setulogmask(logmask);
                break;
            case 'x':
                logmask |= LOG_MASK(LOG_DEBUG);
                (void)setulogmask(logmask);
                break;
            default:
                optopt = ch;
                /*FALLTHROUGH*/
            case '?': {
                nplError("Unknown option: \"%c\"", optopt);
                status = 1;
            }
        }                               /* option character switch */
    }                                   /* getopt() loop */

    if (0 == status) {
        if (optind < argc) {
            nplError("Extraneous command-line argument: \"%s\"",
                    argv[optind]);
            status = 1;
        }
    }

    if (0 != status) {
        nplError("Error decoding command-line");
        usage(progName);
    }
    else {
        nplNotice("Starting Up %s", PACKAGE_VERSION);
        nplNotice("%s", COPYRIGHT_NOTICE);

        if ((status = fifoNew(npages, &fifo)) != 0) {
            NPL_ADD0("Couldn't create FIFO");
            nplLog(LOG_ERR);
        }
        else {
            LdmProductQueue*    prodQueue;

            if ((status = lpqGet(prodQueuePath, &prodQueue)) != 0) {
                NPL_ADD0("Couldn't open LDM product-queue");
                nplLog(LOG_ERR);
            }
            else {
                if (NULL == mcastSpec) {
                    if (0 == (status = spawnProductMaker(NULL, fifo, prodQueue,
                                    &productMaker, &productMakerThread))) {
                        status = spawnFileReader(NULL, NULL, fifo, &reader,
                                &readerThread);
                    }
                }                               /* reading file */
                else {
                    pthread_attr_t  attr;

                    if (0 != (status = pthread_attr_init(&attr))) {
                        NPL_ERRNUM0(status,
                                "Couldn't initialize thread attribute");
                    }
                    else {
#ifndef _POSIX_THREAD_PRIORITY_SCHEDULING
                        nplWarn("Can't adjust thread priorities due to lack of "
                                "necessary support from environment");
#else
                        /*
                         * In order to not miss any data, the reader thread
                         * should preempt the product-maker thread as soon as
                         * data is available and run as long as data is
                         * available.
                         */
                        const int           SCHED_POLICY = SCHED_FIFO;
                        struct sched_param  param;

                        param.sched_priority =
                            sched_get_priority_max(SCHED_POLICY) - 1;

                        (void)pthread_attr_setinheritsched(&attr,
                                PTHREAD_EXPLICIT_SCHED);
                        (void)pthread_attr_setschedpolicy(&attr, SCHED_POLICY);
                        (void)pthread_attr_setschedparam(&attr, &param);
                        (void)pthread_attr_setscope(&attr,
                                PTHREAD_SCOPE_SYSTEM);
#endif
                        if (0 == (status = spawnProductMaker(&attr, fifo,
                                        prodQueue, &productMaker,
                                        &productMakerThread))) {
#ifdef _POSIX_THREAD_PRIORITY_SCHEDULING
                            param.sched_priority++;
                            (void)pthread_attr_setschedparam(&attr, &param);
#endif
                            status = spawnMulticastReader(&attr, mcastSpec,
                                    interface, fifo, &reader, &readerThread);
                        }                       /* product-maker spawned */
                    }                           /* "attr" initialized */
                }                               /* reading multicast packets */

                if (0 != status) {
                    nplLog(LOG_ERR);
                    status = 1;
                }
                else {
                    pthread_t   statThread;

                    (void)gettimeofday(&startTime, NULL);
                    reportTime = startTime;

                    (void)pthread_create(&statThread, NULL,
                            reportStatsWhenSignaled, NULL);

                    set_sigactions();

                    (void)pthread_join(readerThread, NULL);

                    status = readerStatus(reader);

                    (void)pthread_cancel(statThread);
                    (void)pthread_join(statThread, NULL);
                    (void)fifoCloseWhenEmpty(fifo);
                    (void)pthread_join(productMakerThread, NULL);

                    if (0 != status)
                        status = pmStatus(productMaker);

                    reportStats();
                    readerFree(reader);
                }               /* "reader" spawned */

                (void)lpqClose(prodQueue);
            }                       /* "prodQueue" open */
        }                           /* "fifo" created */
    }                               /* command line decoded */

    return status;
}
Пример #3
0
/**
 * Reads a NOAAPORT data stream, creates LDM data-products from the stream, and
 * inserts the data-products into an LDM product-queue.  The NOAAPORT data
 * stream can take the form of multicast UDP packets from (for example) a
 * Novra S300 DVB-S2 receiver or the standard input stream.
 *
 * Usage:
 *     noaaportIngester [-l <em>log</em>] [-n|-v|-x] [-q <em>queue</em>] [-u <em>n</em>] [-m <em>mcastAddr</em>] [-I <em>iface</em>] [-b <em>npages</em>]\n
 *
 * Where:
 * <dl>
 *      <dt>-b <em>npages</em></dt>
 *      <dd>Allocate \e npages pages of memory for the internal buffer.</dd>
 *
 *      <dt>-I <em>iface</em></dt>
 *      <dd>Listen for multicast packets on interface \e iface.</dd>
 *
 *      <dt>-l <em>log</em></dt>
 *      <dd>Log to file \e log. The default is to use the system logging daemon
 *      if the current process is a daemon; otherwise, the standard error
 *      stream is used.</dd>
 *
 *      <dt>-m <em>mcastAddr</em></dt>
 *      <dd>Use the multicast address \e mcastAddr. The default is to
 *      read from the standard input stream.</dd>
 *
 *      <dt>-n</dt>
 *      <dd>Log messages of level NOTE and higher priority. Each data-product
 *      will generate a log message.</dd>
 *
 *      <dt>-q <em>queue</em></dt>
 *      <dd>Use \e queue as the pathname of the LDM product-queue. The default
 *      is to use the default LDM pathname of the product-queue.</dd>
 *
 *      <dt>-u <em>n</em></dt>
 *      <dd>If logging is to the system logging daemon, then use facility 
 *      <b>local</b><em>n</em>. The default is to use the LDM facility.</dd>
 *
 *      <dt>-v</dt>
 *      <dd>Log messages of level INFO and higher priority.</dd>
 *
 *      <dt>-x</dt>
 *      <dd>Log messages of level DEBUG and higher priority.</dd>
 * </dl>
 *
 * If neither -n, -v, nor -x is specified, then logging will be restricted to
 * levels ERROR and WARN only.
 *
 * @retval 0 if successful.
 * @retval 1 if an error occurred. At least one error-message will be logged.
 */
int main(
    const int           argc,           /**< [in] Number of arguments */
    char* const         argv[])         /**< [in] Arguments */
{
    int                 status = 0;     /* default success */
    extern int          optind;
    extern int          opterr;
    int                 ch;
    const char* const   progName = ubasename(argv[0]);
    const char*         interface = NULL;
    int                 logmask = LOG_UPTO(LOG_WARNING);
    const unsigned      logOptions = LOG_CONS | LOG_PID;
    const char*         mcastSpec = NULL;
    const char*         prodQueuePath = NULL;
    size_t              npages = DEFAULT_NPAGES;
    Fifo*               fifo;
    int                 ttyFd = open("/dev/tty", O_RDONLY);
    int                 processPriority = 0;
    int                 idx;
    const char*         logPath = (-1 == ttyFd)
        ? NULL                          /* log to system logging daemon */
        : "-";                          /* log to standard error stream */

    (void)close(ttyFd);
    (void)setulogmask(logmask);

    status = initLogging(progName, logOptions, logFacility, logPath);
    opterr = 0;                         /* no error messages from getopt(3) */

    while (0 == status && (ch = getopt(argc, argv, "b:I:l:m:np:q:r:s:t:u:vx")) != -1)
    {
        switch (ch) {
            extern char*    optarg;
            extern int      optopt;

            case 'b': {
                unsigned long   n;

                if (sscanf(optarg, "%lu", &n) != 1) {
                    LOG_SERROR1("Couldn't decode FIFO size in pages: \"%s\"",
                            optarg);
                    status = 1;
                }
                else {
                    npages = n;
                }
                break;
            }
            case 'I':
                interface = optarg;
                break;
            case 'l':
                logPath = optarg;
                status = initLogging(progName, logOptions, logFacility,
                        logPath);
                break;
            case 'm':
                mcastSpec = optarg;
                break;
            case 'n':
                logmask |= LOG_MASK(LOG_NOTICE);
                (void)setulogmask(logmask);
                break;
            case 'p': {
                char* cp;

                errno = 0;
                processPriority = (int)strtol(optarg, &cp, 0);

                if (0 != errno) {
                    LOG_SERROR1("Couldn't decode priority \"%s\"", optarg);
                    log_log(LOG_ERR);
                }
                else {
                    if (processPriority < -20)
                        processPriority = -20;
                    else if (processPriority > 20)
                        processPriority = 20;
                }

                break;
            }
            case 'q':
                prodQueuePath = optarg;
                break;
            case 'r':
#ifdef RETRANS_SUPPORT
                retrans_xmit_enable = atoi(optarg);
                if(retrans_xmit_enable == 1)
                  retrans_xmit_enable = OPTION_ENABLE;
                else
                  retrans_xmit_enable = OPTION_DISABLE;
#endif
                break;
           case 's': {
#ifdef RETRANS_SUPPORT
			strcpy(sbn_channel_name, optarg);
                        if(!strcmp(optarg,NAME_SBN_TYP_GOES)) {
                                sbn_type = SBN_TYP_GOES;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NOAAPORT_OPT)) {
                                sbn_type = SBN_TYP_NOAAPORT_OPT;
                                break;
                        }
                        if(!strcmp(optarg,"NWSTG")) {
                                sbn_type = SBN_TYP_NMC;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NMC)) {
                                sbn_type = SBN_TYP_NMC;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NMC2)) {
                                sbn_type = SBN_TYP_NMC2;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NMC3)) {
                                sbn_type = SBN_TYP_NMC3;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_NWWS)) {
                                sbn_type = SBN_TYP_NWWS;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_ADD)) {
                                sbn_type = SBN_TYP_ADD;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_ENC)) {
                                sbn_type = SBN_TYP_ENC;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_EXP)) {
                                sbn_type = SBN_TYP_EXP;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_GRW)) {
                                sbn_type = SBN_TYP_GRW;
                                break;
                        }
                        if(!strcmp(optarg,NAME_SBN_TYP_GRE)) {
                                sbn_type = SBN_TYP_GRE;
                                break;
                        }
                        printf("Operator input: UNKNOWN type must be\n");
                        printf(" %s, %s, %s, %s, %s, %s, %s, %s, %s, %s  or %s \n",
                                NAME_SBN_TYP_NMC,
                                NAME_SBN_TYP_GOES,
                                NAME_SBN_TYP_NOAAPORT_OPT,
                                NAME_SBN_TYP_NMC2,
                                NAME_SBN_TYP_NMC3,
                                NAME_SBN_TYP_NWWS,
                                NAME_SBN_TYP_ADD,
                                NAME_SBN_TYP_ENC,
                                NAME_SBN_TYP_EXP,
                                NAME_SBN_TYP_GRW,
                                NAME_SBN_TYP_GRE);
#endif
                break;
              }
            case 't':
#ifdef RETRANS_SUPPORT
                strcpy(transfer_type, optarg);
                if(!strcmp(transfer_type,"MHS") || !strcmp(transfer_type,"mhs")){
                     /** Using MHS for communication with NCF  **/
                }else{
                     uerror("No other mechanism other than MHS is currently supported\n");
                     status  = 1;
                 }
#endif
                break;
            case 'u': {
                int         i = atoi(optarg);

                if (0 > i || 7 < i) {
                    LOG_START1("Invalid logging facility number: %d", i);
                    status = 1;
                }
                else {
                    static int  logFacilities[] = {LOG_LOCAL0, LOG_LOCAL1,
                        LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4, LOG_LOCAL5,
                        LOG_LOCAL6, LOG_LOCAL7};

                    logFacility = logFacilities[i];

                    status = initLogging(progName, logOptions, logFacility,
                            logPath);
                }

                break;
            }
            case 'v':
                logmask |= LOG_MASK(LOG_INFO);
                (void)setulogmask(logmask);
                break;
            case 'x':
                logmask |= LOG_MASK(LOG_DEBUG);
                (void)setulogmask(logmask);
                break;
            default:
                optopt = ch;
                /*FALLTHROUGH*/
                /* no break */
            case '?': {
                uerror("Unknown option: \"%c\"", optopt);
                status = 1;
                break;
            }
        }                               /* option character switch */
    }                                   /* getopt() loop */

    if (0 == status) {
        if (optind < argc) {
            uerror("Extraneous command-line argument: \"%s\"",
                    argv[optind]);
            status = 1;
        }
    }

    if (0 != status) {
        uerror("Error decoding command-line");
        usage(progName);
    }
    else {
        unotice("Starting Up %s", PACKAGE_VERSION);
        unotice("%s", COPYRIGHT_NOTICE);

        if ((status = fifoNew(npages, &fifo)) != 0) {
            LOG_ADD0("Couldn't create FIFO");
            log_log(LOG_ERR);
        }
        else {
            LdmProductQueue*    prodQueue;

            if ((status = lpqGet(prodQueuePath, &prodQueue)) != 0) {
                LOG_ADD0("Couldn't open LDM product-queue");
                log_log(LOG_ERR);
            }
            else {
                if (NULL == mcastSpec) {
                    if (0 == (status = spawnProductMaker(NULL, fifo, prodQueue,
                                    &productMaker, &productMakerThread))) {
                        status = spawnFileReader(NULL, NULL, fifo, &reader,
                                &readerThread);
                    }
                }                               /* reading file */
                else {
                    pthread_attr_t  attr;

                    if (0 != (status = pthread_attr_init(&attr))) {
                        LOG_ERRNUM0(status,
                                "Couldn't initialize thread attribute");
                    }
                    else {
#ifndef _POSIX_THREAD_PRIORITY_SCHEDULING
                        uwarn("Can't adjust thread priorities due to lack of "
                                "necessary support from environment");
#else
                        /*
                         * In order to not miss any data, the reader thread
                         * should preempt the product-maker thread as soon as
                         * data is available and run as long as data is
                         * available.
                         */
                        const int           SCHED_POLICY = SCHED_FIFO;
                        struct sched_param  param;

                        param.sched_priority =
                            sched_get_priority_max(SCHED_POLICY) - 1;

                        (void)pthread_attr_setinheritsched(&attr,
                                PTHREAD_EXPLICIT_SCHED);
                        (void)pthread_attr_setschedpolicy(&attr, SCHED_POLICY);
                        (void)pthread_attr_setschedparam(&attr, &param);
                        (void)pthread_attr_setscope(&attr,
                                PTHREAD_SCOPE_SYSTEM);
#endif
#ifdef RETRANS_SUPPORT
                        if (retrans_xmit_enable == OPTION_ENABLE){
                         /* Copy mcastAddress needed to obtain the cpio entries */
                         strcpy(mcastAddr, mcastSpec);
                        }
#endif
                        if (0 == (status = spawnProductMaker(&attr, fifo,
                                        prodQueue, &productMaker,
                                        &productMakerThread))) {
#ifdef _POSIX_THREAD_PRIORITY_SCHEDULING
                            param.sched_priority++;
                            (void)pthread_attr_setschedparam(&attr, &param);
#endif
                            status = spawnMulticastReader(&attr, mcastSpec,
                                    interface, fifo, &reader, &readerThread);

                        }                       /* product-maker spawned */
                    }                           /* "attr" initialized */
                }                               /* reading multicast packets */

                if (0 != status) {
                    log_log(LOG_ERR);
                    status = 1;
                }
                else {
                    pthread_t   statThread;

                    (void)gettimeofday(&startTime, NULL);
                    reportTime = startTime;

                    (void)pthread_create(&statThread, NULL,
                            reportStatsWhenSignaled, NULL);

                    set_sigactions();

                    (void)pthread_join(readerThread, NULL);

                    status = readerStatus(reader);

                    (void)pthread_cancel(statThread);
                    (void)pthread_join(statThread, NULL);
                    (void)fifoCloseWhenEmpty(fifo);
                    (void)pthread_join(productMakerThread, NULL);

                    if (0 != status)
                        status = pmStatus(productMaker);

                    reportStats();
                    readerFree(reader);
#ifdef RETRANS_SUPPORT
					/** Release buffer allocated for retransmission **/
					if(retrans_xmit_enable == OPTION_ENABLE){
					  freeRetransMem();
					}
#endif
                }               /* "reader" spawned */

                (void)lpqClose(prodQueue);
            }                       /* "prodQueue" open */
        }                           /* "fifo" created */
    }                               /* command line decoded */

    return status;
}