void sun3_init_IRQ(void)
{
*sun3_intreg = 1;
m68k_setup_auto_interrupt(sun3_inthandle);
m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7);
m68k_setup_user_interrupt(VEC_USER, 192, NULL);
request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL);
request_irq(IRQ_AUTO_7, sun3_int7, 0, "int7", NULL);
request_irq(IRQ_USER+127, sun3_vec255, 0, "vec255", NULL);
}
void __init sun3_init_IRQ(void)
{
*sun3_intreg = 1;
m68k_setup_user_interrupt(VEC_USER, 128);
if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "clock", NULL))
pr_err("Couldn't register %s interrupt\n", "int5");
if (request_irq(IRQ_AUTO_7, sun3_int7, 0, "nmi", NULL))
pr_err("Couldn't register %s interrupt\n", "int7");
if (request_irq(IRQ_USER+127, sun3_vec255, 0, "vec255", NULL))
pr_err("Couldn't register %s interrupt\n", "vec255");
}
void __init sun3_init_IRQ(void)
{
*sun3_intreg = 1;
m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1,
7);
m68k_setup_user_interrupt(VEC_USER, 128);
if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL))
pr_err("Couldn't register %s interrupt\n", "int5");
if (request_irq(IRQ_AUTO_7, sun3_int7, 0, "int7", NULL))
pr_err("Couldn't register %s interrupt\n", "int7");
if (request_irq(IRQ_USER+127, sun3_vec255, 0, "vec255", NULL))
pr_err("Couldn't register %s interrupt\n", "vec255");
}
void __init dn_init_IRQ(void)
{
m68k_setup_user_interrupt(VEC_USER + 96, 16);
m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq,
IRQ_APOLLO, 16);
}
void __init atari_init_IRQ(void)
{
m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL);
m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1);
/* Initialize the MFP(s) */
#ifdef ATARI_USE_SOFTWARE_EOI
st_mfp.vec_adr = 0x48; /* Software EOI-Mode */
#else
st_mfp.vec_adr = 0x40; /* Automatic EOI-Mode */
#endif
st_mfp.int_en_a = 0x00; /* turn off MFP-Ints */
st_mfp.int_en_b = 0x00;
st_mfp.int_mk_a = 0xff; /* no Masking */
st_mfp.int_mk_b = 0xff;
if (ATARIHW_PRESENT(TT_MFP)) {
#ifdef ATARI_USE_SOFTWARE_EOI
tt_mfp.vec_adr = 0x58; /* Software EOI-Mode */
#else
tt_mfp.vec_adr = 0x50; /* Automatic EOI-Mode */
#endif
tt_mfp.int_en_a = 0x00; /* turn off MFP-Ints */
tt_mfp.int_en_b = 0x00;
tt_mfp.int_mk_a = 0xff; /* no Masking */
tt_mfp.int_mk_b = 0xff;
}
if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) {
scc.cha_a_ctrl = 9;
MFPDELAY();
scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
}
if (ATARIHW_PRESENT(SCU)) {
/* init the SCU if present */
tt_scu.sys_mask = 0x10; /* enable VBL (for the cursor) and
* disable HSYNC interrupts (who
* needs them?) MFP and SCC are
* enabled in VME mask
*/
tt_scu.vme_mask = 0x60; /* enable MFP and SCC ints */
} else {
/* If no SCU and no Hades, the HSYNC interrupt needs to be
* disabled this way. (Else _inthandler in kernel/sys_call.S
* gets overruns)
*/
vectors[VEC_INT2] = falcon_hblhandler;
vectors[VEC_INT4] = falcon_hblhandler;
}
if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
/* Initialize the LM1992 Sound Controller to enable
the PSG sound. This is misplaced here, it should
be in an atasound_init(), that doesn't exist yet. */
atari_microwire_cmd(MW_LM1992_PSG_HIGH);
}
stdma_init();
/* Initialize the PSG: all sounds off, both ports output */
sound_ym.rd_data_reg_sel = 7;
sound_ym.wd_data = 0xff;
}
void __init dn_init_IRQ(void)
{
m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int);
m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16);
}
void __init mvme147_init_IRQ(void)
{
m68k_setup_user_interrupt(VEC_USER, 192, NULL);
}
