static int
mac_bpf_client_open(uintptr_t mhandle, uintptr_t *chandlep)
{
return (mac_client_open((mac_handle_t)mhandle,
(mac_client_handle_t *)chandlep, NULL,
MAC_OPEN_FLAGS_USE_DATALINK_NAME));
}
/*
* Open a MAC client for a port or an interface.
* The flags and their purpose as below:
*
* MAC_OPEN_FLAGS_SHARES_DESIRED -- This flag is used to indicate
* that a port desires a Share. This will be the case with the
* the ports that have hybrid mode enabled. This will only cause
* MAC layer to allocate a share and corresponding resources
* ahead of time. Ports that are not HybridIO enabled are
* associated with default group & resources.
*
* MAC_UNICAST_TAG_DISABLE -- This flag is used for VLAN
* support. It will cause MAC to not add any tags, but expect
* vsw to tag the packets.
*
* MAC_UNICAST_STRIP_DISABLE -- This flag is used for VLAN
* support. It will case the MAC layer to not strip the tags.
* Vsw may have to strip the tag for pvid case.
*/
static int
vsw_maccl_open(vsw_t *vswp, vsw_port_t *port, int type)
{
int rv = 0;
int instance;
char mac_cl_name[MAXNAMELEN];
const char *dev_name;
mac_client_handle_t *mchp;
uint64_t flags = 0;
ASSERT(MUTEX_HELD(&vswp->mac_lock));
if (vswp->mh == NULL) {
/*
* In case net-dev is changed (either set to nothing or
* using aggregation device), return success here as the
* timeout mechanism will handle it.
*/
return (0);
}
mchp = (type == VSW_LOCALDEV) ? &vswp->mch : &port->p_mch;
if (*mchp != NULL) {
/* already open */
return (0);
}
dev_name = ddi_driver_name(vswp->dip);
instance = ddi_get_instance(vswp->dip);
if (type == VSW_VNETPORT) {
if (port->p_hio_enabled)
flags |= MAC_OPEN_FLAGS_SHARES_DESIRED;
(void) snprintf(mac_cl_name, MAXNAMELEN, "%s%d%s%d", dev_name,
instance, "_port", port->p_instance);
} else {
(void) snprintf(mac_cl_name, MAXNAMELEN, "%s%s%d",
dev_name, "_if", instance);
}
rv = mac_client_open(vswp->mh, mchp, mac_cl_name, flags);
if (rv != 0) {
cmn_err(CE_NOTE, "!vsw%d:%s mac_client_open() failed\n",
vswp->instance, mac_cl_name);
}
if (type != VSW_VNETPORT || !port->p_hio_enabled)
mac_client_set_rings(*mchp, MAC_RXRINGS_NONE, MAC_TXRINGS_NONE);
return (rv);
}
/*
* pfp_open_index is an internal function used to open a MAC device by
* its index. Both a mac_handle_t and mac_client_handle_t are acquired
* because some of the interfaces provided by the mac layer require either
* only the mac_handle_t or both it and mac_handle_t.
*
* Whilst inside the kernel we can access data structures supporting any
* zone, access to interfaces from non-global zones is restricted to those
* interfaces (if any) that are exclusively assigned to a zone.
*/
static int
pfp_open_index(int index, mac_handle_t *mhp, mac_client_handle_t *mcip,
cred_t *cred)
{
mac_client_handle_t mch;
zoneid_t ifzoneid;
mac_handle_t mh;
zoneid_t zoneid;
int error;
mh = 0;
mch = 0;
error = mac_open_by_linkid(index, &mh);
if (error != 0)
goto bad_open;
error = mac_client_open(mh, &mch, NULL,
MAC_OPEN_FLAGS_USE_DATALINK_NAME);
if (error != 0)
goto bad_open;
zoneid = crgetzoneid(cred);
if (zoneid != GLOBAL_ZONEID) {
mac_perim_handle_t perim;
mac_perim_enter_by_mh(mh, &perim);
error = dls_link_getzid(mac_client_name(mch), &ifzoneid);
mac_perim_exit(perim);
if (error != 0)
goto bad_open;
if (ifzoneid != zoneid) {
error = EACCES;
goto bad_open;
}
}
*mcip = mch;
*mhp = mh;
return (0);
bad_open:
if (mch != 0)
mac_client_close(mch, 0);
if (mh != 0)
mac_close(mh);
return (error);
}
/*
* Setup secondary MAC addresses on the vnic. Due to limitations in the mac
* code, each mac address must be associated with a mac_client (and the
* flow that goes along with the client) so we need to create those clients
* here.
*/
static int
vnic_set_secondary_macs(vnic_t *vn, mac_secondary_addr_t *msa)
{
int i, err;
char primary_name[MAXNAMELEN];
/* First, remove pre-existing secondaries */
ASSERT(vn->vn_nhandles < MPT_MAXMACADDR);
vnic_cleanup_secondary_macs(vn, vn->vn_nhandles);
if (msa->ms_addrcnt == (uint32_t)-1)
msa->ms_addrcnt = 0;
vn->vn_nhandles = msa->ms_addrcnt;
(void) dls_mgmt_get_linkinfo(vn->vn_id, primary_name, NULL, NULL, NULL);
/*
* Now add the new secondary MACs
* Recall that the primary MAC address is the first element.
* The secondary clients are named after the primary with their
* index to distinguish them.
*/
for (i = 1; i <= vn->vn_nhandles; i++) {
uint8_t *addr;
mac_diag_t mac_diag;
char secondary_name[MAXNAMELEN];
(void) snprintf(secondary_name, sizeof (secondary_name),
"%s%02d", primary_name, i);
err = mac_client_open(vn->vn_lower_mh, &vn->vn_mc_handles[i],
secondary_name, MAC_OPEN_FLAGS_IS_VNIC);
if (err != 0) {
/* Remove any that we successfully added */
vnic_cleanup_secondary_macs(vn, --i);
return (err);
}
/*
* Assign a MAC address to the VNIC
*
* Normally this would be done with vnic_unicast_add but since
* we know these are fixed adddresses, and since we need to
* save this in the proper array slot, we bypass that function
* and go direct.
*/
addr = msa->ms_addrs[i - 1];
err = mac_unicast_add(vn->vn_mc_handles[i], addr, 0,
&vn->vn_mu_handles[i], vn->vn_vid, &mac_diag);
if (err != 0) {
/* Remove any that we successfully added */
vnic_cleanup_secondary_macs(vn, i);
return (err);
}
/*
* Setup the secondary the same way as the primary (i.e.
* receiver function/argument (e.g. i_dls_link_rx, mac_pkt_drop,
* etc.), the promisc list, and the resource controls).
*/
mac_secondary_dup(vn->vn_mc_handles[0], vn->vn_mc_handles[i]);
}
return (0);
}
/* ARGSUSED */
int
vnic_dev_create(datalink_id_t vnic_id, datalink_id_t linkid,
vnic_mac_addr_type_t *vnic_addr_type, int *mac_len, uchar_t *mac_addr,
int *mac_slot, uint_t mac_prefix_len, uint16_t vid, vrid_t vrid,
int af, mac_resource_props_t *mrp, uint32_t flags, vnic_ioc_diag_t *diag,
cred_t *credp)
{
vnic_t *vnic;
mac_register_t *mac;
int err;
boolean_t is_anchor = ((flags & VNIC_IOC_CREATE_ANCHOR) != 0);
char vnic_name[MAXNAMELEN];
const mac_info_t *minfop;
uint32_t req_hwgrp_flag = B_FALSE;
*diag = VNIC_IOC_DIAG_NONE;
rw_enter(&vnic_lock, RW_WRITER);
/* does a VNIC with the same id already exist? */
err = mod_hash_find(vnic_hash, VNIC_HASH_KEY(vnic_id),
(mod_hash_val_t *)&vnic);
if (err == 0) {
rw_exit(&vnic_lock);
return (EEXIST);
}
vnic = kmem_cache_alloc(vnic_cache, KM_NOSLEEP);
if (vnic == NULL) {
rw_exit(&vnic_lock);
return (ENOMEM);
}
bzero(vnic, sizeof (*vnic));
vnic->vn_id = vnic_id;
vnic->vn_link_id = linkid;
vnic->vn_vrid = vrid;
vnic->vn_af = af;
if (!is_anchor) {
if (linkid == DATALINK_INVALID_LINKID) {
err = EINVAL;
goto bail;
}
/*
* Open the lower MAC and assign its initial bandwidth and
* MAC address. We do this here during VNIC creation and
* do not wait until the upper MAC client open so that we
* can validate the VNIC creation parameters (bandwidth,
* MAC address, etc) and reserve a factory MAC address if
* one was requested.
*/
err = mac_open_by_linkid(linkid, &vnic->vn_lower_mh);
if (err != 0)
goto bail;
/*
* VNIC(vlan) over VNICs(vlans) is not supported.
*/
if (mac_is_vnic(vnic->vn_lower_mh)) {
err = EINVAL;
goto bail;
}
/* only ethernet support for now */
minfop = mac_info(vnic->vn_lower_mh);
if (minfop->mi_nativemedia != DL_ETHER) {
err = ENOTSUP;
goto bail;
}
(void) dls_mgmt_get_linkinfo(vnic_id, vnic_name, NULL, NULL,
NULL);
err = mac_client_open(vnic->vn_lower_mh, &vnic->vn_mch,
vnic_name, MAC_OPEN_FLAGS_IS_VNIC);
if (err != 0)
goto bail;
/* assign a MAC address to the VNIC */
err = vnic_unicast_add(vnic, *vnic_addr_type, mac_slot,
mac_prefix_len, mac_len, mac_addr, flags, diag, vid,
req_hwgrp_flag);
if (err != 0) {
vnic->vn_muh = NULL;
if (diag != NULL && req_hwgrp_flag)
*diag = VNIC_IOC_DIAG_NO_HWRINGS;
goto bail;
}
/* register to receive notification from underlying MAC */
vnic->vn_mnh = mac_notify_add(vnic->vn_lower_mh, vnic_notify_cb,
vnic);
*vnic_addr_type = vnic->vn_addr_type;
vnic->vn_addr_len = *mac_len;
vnic->vn_vid = vid;
bcopy(mac_addr, vnic->vn_addr, vnic->vn_addr_len);
if (vnic->vn_addr_type == VNIC_MAC_ADDR_TYPE_FACTORY)
vnic->vn_slot_id = *mac_slot;
/*
* Set the initial VNIC capabilities. If the VNIC is created
* over MACs which does not support nactive vlan, disable
* VNIC's hardware checksum capability if its VID is not 0,
* since the underlying MAC would get the hardware checksum
* offset wrong in case of VLAN packets.
*/
if (vid == 0 || !mac_capab_get(vnic->vn_lower_mh,
MAC_CAPAB_NO_NATIVEVLAN, NULL)) {
if (!mac_capab_get(vnic->vn_lower_mh, MAC_CAPAB_HCKSUM,
&vnic->vn_hcksum_txflags))
vnic->vn_hcksum_txflags = 0;
} else {
vnic->vn_hcksum_txflags = 0;
}
}
/* register with the MAC module */
if ((mac = mac_alloc(MAC_VERSION)) == NULL)
goto bail;
mac->m_type_ident = MAC_PLUGIN_IDENT_ETHER;
mac->m_driver = vnic;
mac->m_dip = vnic_get_dip();
mac->m_instance = (uint_t)-1;
mac->m_src_addr = vnic->vn_addr;
mac->m_callbacks = &vnic_m_callbacks;
if (!is_anchor) {
/*
* If this is a VNIC based VLAN, then we check for the
* margin unless it has been created with the force
* flag. If we are configuring a VLAN over an etherstub,
* we don't check the margin even if force is not set.
*/
if (vid == 0 || (flags & VNIC_IOC_CREATE_FORCE) != 0) {
if (vid != VLAN_ID_NONE)
vnic->vn_force = B_TRUE;
/*
* As the current margin size of the underlying mac is
* used to determine the margin size of the VNIC
* itself, request the underlying mac not to change
* to a smaller margin size.
*/
err = mac_margin_add(vnic->vn_lower_mh,
&vnic->vn_margin, B_TRUE);
ASSERT(err == 0);
} else {
vnic->vn_margin = VLAN_TAGSZ;
err = mac_margin_add(vnic->vn_lower_mh,
&vnic->vn_margin, B_FALSE);
if (err != 0) {
mac_free(mac);
if (diag != NULL)
*diag = VNIC_IOC_DIAG_MACMARGIN_INVALID;
goto bail;
}
}
mac_sdu_get(vnic->vn_lower_mh, &mac->m_min_sdu,
&mac->m_max_sdu);
err = mac_mtu_add(vnic->vn_lower_mh, &mac->m_max_sdu, B_FALSE);
if (err != 0) {
VERIFY(mac_margin_remove(vnic->vn_lower_mh,
vnic->vn_margin) == 0);
mac_free(mac);
if (diag != NULL)
*diag = VNIC_IOC_DIAG_MACMTU_INVALID;
goto bail;
}
vnic->vn_mtu = mac->m_max_sdu;
} else {
vnic->vn_margin = VLAN_TAGSZ;
mac->m_min_sdu = 1;
mac->m_max_sdu = ANCHOR_VNIC_MAX_MTU;
vnic->vn_mtu = ANCHOR_VNIC_MAX_MTU;
}
mac->m_margin = vnic->vn_margin;
err = mac_register(mac, &vnic->vn_mh);
mac_free(mac);
if (err != 0) {
if (!is_anchor) {
VERIFY(mac_mtu_remove(vnic->vn_lower_mh,
vnic->vn_mtu) == 0);
VERIFY(mac_margin_remove(vnic->vn_lower_mh,
vnic->vn_margin) == 0);
}
goto bail;
}
/* Set the VNIC's MAC in the client */
if (!is_anchor) {
mac_set_upper_mac(vnic->vn_mch, vnic->vn_mh, mrp);
if (mrp != NULL) {
if ((mrp->mrp_mask & MRP_RX_RINGS) != 0 ||
(mrp->mrp_mask & MRP_TX_RINGS) != 0) {
req_hwgrp_flag = B_TRUE;
}
err = mac_client_set_resources(vnic->vn_mch, mrp);
if (err != 0) {
VERIFY(mac_mtu_remove(vnic->vn_lower_mh,
vnic->vn_mtu) == 0);
VERIFY(mac_margin_remove(vnic->vn_lower_mh,
vnic->vn_margin) == 0);
(void) mac_unregister(vnic->vn_mh);
goto bail;
}
}
}
err = dls_devnet_create(vnic->vn_mh, vnic->vn_id, crgetzoneid(credp));
if (err != 0) {
VERIFY(is_anchor || mac_margin_remove(vnic->vn_lower_mh,
vnic->vn_margin) == 0);
if (!is_anchor) {
VERIFY(mac_mtu_remove(vnic->vn_lower_mh,
vnic->vn_mtu) == 0);
VERIFY(mac_margin_remove(vnic->vn_lower_mh,
vnic->vn_margin) == 0);
}
(void) mac_unregister(vnic->vn_mh);
goto bail;
}
/* add new VNIC to hash table */
err = mod_hash_insert(vnic_hash, VNIC_HASH_KEY(vnic_id),
(mod_hash_val_t)vnic);
ASSERT(err == 0);
vnic_count++;
/*
* Now that we've enabled this VNIC, we should go through and update the
* link state by setting it to our parents.
*/
vnic->vn_enabled = B_TRUE;
if (is_anchor) {
mac_link_update(vnic->vn_mh, LINK_STATE_UP);
} else {
mac_link_update(vnic->vn_mh,
mac_client_stat_get(vnic->vn_mch, MAC_STAT_LINK_STATE));
}
rw_exit(&vnic_lock);
return (0);
bail:
rw_exit(&vnic_lock);
if (!is_anchor) {
if (vnic->vn_mnh != NULL)
(void) mac_notify_remove(vnic->vn_mnh, B_TRUE);
if (vnic->vn_muh != NULL)
(void) mac_unicast_remove(vnic->vn_mch, vnic->vn_muh);
if (vnic->vn_mch != NULL)
mac_client_close(vnic->vn_mch, MAC_CLOSE_FLAGS_IS_VNIC);
if (vnic->vn_lower_mh != NULL)
mac_close(vnic->vn_lower_mh);
}
kmem_cache_free(vnic_cache, vnic);
return (err);
}
static boolean_t
xnbo_open_mac(xnb_t *xnbp, char *mac)
{
xnbo_t *xnbop = xnbp->xnb_flavour_data;
int err;
const mac_info_t *mi;
void (*rx_fn)(void *, mac_resource_handle_t, mblk_t *, boolean_t);
struct ether_addr ea;
uint_t max_sdu;
mac_diag_t diag;
if ((err = mac_open_by_linkname(mac, &xnbop->o_mh)) != 0) {
cmn_err(CE_WARN, "xnbo_open_mac: "
"cannot open mac for link %s (%d)", mac, err);
return (B_FALSE);
}
ASSERT(xnbop->o_mh != NULL);
mi = mac_info(xnbop->o_mh);
ASSERT(mi != NULL);
if (mi->mi_media != DL_ETHER) {
cmn_err(CE_WARN, "xnbo_open_mac: "
"device is not DL_ETHER (%d)", mi->mi_media);
i_xnbo_close_mac(xnbp, B_TRUE);
return (B_FALSE);
}
if (mi->mi_media != mi->mi_nativemedia) {
cmn_err(CE_WARN, "xnbo_open_mac: "
"device media and native media mismatch (%d != %d)",
mi->mi_media, mi->mi_nativemedia);
i_xnbo_close_mac(xnbp, B_TRUE);
return (B_FALSE);
}
mac_sdu_get(xnbop->o_mh, NULL, &max_sdu);
if (max_sdu > XNBMAXPKT) {
cmn_err(CE_WARN, "xnbo_open_mac: mac device SDU too big (%d)",
max_sdu);
i_xnbo_close_mac(xnbp, B_TRUE);
return (B_FALSE);
}
/*
* MAC_OPEN_FLAGS_MULTI_PRIMARY is relevant when we are migrating a
* guest on the localhost itself. In this case we would have the MAC
* client open for the guest being migrated *and* also for the
* migrated guest (i.e. the former will be active till the migration
* is complete when the latter will be activated). This flag states
* that it is OK for mac_unicast_add to add the primary MAC unicast
* address multiple times.
*/
if (mac_client_open(xnbop->o_mh, &xnbop->o_mch, NULL,
MAC_OPEN_FLAGS_USE_DATALINK_NAME |
MAC_OPEN_FLAGS_MULTI_PRIMARY) != 0) {
cmn_err(CE_WARN, "xnbo_open_mac: "
"error (%d) opening mac client", err);
i_xnbo_close_mac(xnbp, B_TRUE);
return (B_FALSE);
}
if (xnbop->o_need_rx_filter)
rx_fn = xnbo_from_mac_filter;
else
rx_fn = xnbo_from_mac;
err = mac_unicast_add_set_rx(xnbop->o_mch, NULL, MAC_UNICAST_PRIMARY,
&xnbop->o_mah, 0, &diag, xnbop->o_multicast_control ? rx_fn : NULL,
xnbp);
if (err != 0) {
cmn_err(CE_WARN, "xnbo_open_mac: failed to get the primary "
"MAC address of %s: %d", mac, err);
i_xnbo_close_mac(xnbp, B_TRUE);
return (B_FALSE);
}
if (!xnbop->o_multicast_control) {
err = mac_promisc_add(xnbop->o_mch, MAC_CLIENT_PROMISC_ALL,
rx_fn, xnbp, &xnbop->o_mphp, MAC_PROMISC_FLAGS_NO_TX_LOOP |
MAC_PROMISC_FLAGS_VLAN_TAG_STRIP);
if (err != 0) {
cmn_err(CE_WARN, "xnbo_open_mac: "
"cannot enable promiscuous mode of %s: %d",
mac, err);
i_xnbo_close_mac(xnbp, B_TRUE);
return (B_FALSE);
}
xnbop->o_promiscuous = B_TRUE;
}
if (xnbop->o_need_setphysaddr) {
err = mac_unicast_primary_set(xnbop->o_mh, xnbp->xnb_mac_addr);
/* Warn, but continue on. */
if (err != 0) {
bcopy(xnbp->xnb_mac_addr, ea.ether_addr_octet,
ETHERADDRL);
cmn_err(CE_WARN, "xnbo_open_mac: "
"cannot set MAC address of %s to "
"%s: %d", mac, ether_sprintf(&ea), err);
}
}
if (!mac_capab_get(xnbop->o_mh, MAC_CAPAB_HCKSUM,
&xnbop->o_hcksum_capab))
xnbop->o_hcksum_capab = 0;
xnbop->o_running = B_TRUE;
return (B_TRUE);
}
