static void led_brightness_set_flash(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
if(brightness){
if(machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
gpio_set_value(qrd5_led_flash_en1, 1);
else if(machine_is_msm8625_qrd7())
gpio_set_value(qrd7_led_flash_en, 1);
} else {
if(machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
gpio_set_value(qrd5_led_flash_en1, 0);
else if(machine_is_msm8625_qrd7())
gpio_set_value(qrd7_led_flash_en, 0);
}
}
void __init msm_msm7627a_allocate_memory_regions(void)
{
void *addr;
unsigned long fb_size;
if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa())
fb_size = MSM7x25A_MSM_FB_SIZE;
else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()
|| machine_is_msm8625q_skue()
)
fb_size = MSM8x25_MSM_FB_SIZE;
else if (machine_is_msm8625q_evbd() || machine_is_msm8625q_skud())
fb_size = MSM8x25Q_MSM_FB_SIZE;
else
fb_size = MSM_FB_SIZE;
addr = alloc_bootmem_align(fb_size, 0x1000);
msm_fb_resources[0].start = __pa(addr);
msm_fb_resources[0].end = msm_fb_resources[0].start + fb_size - 1;
pr_info("allocating %lu bytes at %p (%lx physical) for fb\n", fb_size,
addr, __pa(addr));
#ifdef CONFIG_MSM_V4L2_VIDEO_OVERLAY_DEVICE
fb_size = MSM_V4L2_VIDEO_OVERLAY_BUF_SIZE;
addr = alloc_bootmem_align(fb_size, 0x1000);
msm_v4l2_video_overlay_resources[0].start = __pa(addr);
msm_v4l2_video_overlay_resources[0].end =
msm_v4l2_video_overlay_resources[0].start + fb_size - 1;
pr_debug("allocating %lu bytes at %p (%lx physical) for v4l2\n",
fb_size, addr, __pa(addr));
#endif
}
static int mipi_NT35510_rotate_panel(void)
{
int rotate = 0;
if (machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
rotate = 1;
return rotate;
}
static int __init qrd_wlan_init(void)
{
int rc;
pr_info("WLAN power init\n");
if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5()
|| machine_is_msm7x27a_qrd5a()
|| machine_is_msm8625_skua()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7()) {
rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config %d failed,error = %d\n",
__func__, gpio_wlan_sys_rest_en, rc);
goto exit;
}
gpio_set_value(gpio_wlan_sys_rest_en, 0);
} else {
gpio_request(gpio_wlan_sys_rest_en, "WLAN_DEEP_SLEEP_N");
rc = setup_wlan_gpio(false);
gpio_free(gpio_wlan_sys_rest_en);
if (rc) {
pr_err("%s: wlan_set_gpio = %d\n", __func__, rc);
goto exit;
}
}
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1()) {
rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config %d failed,error = %d\n",
__func__, GPIO_WLAN_3V3_EN, rc);
goto exit;
}
gpio_set_value(GPIO_WLAN_3V3_EN, 0);
}
/*ATH6KL_USES_PREALLOCATE_MEM*/
#ifdef CONFIG_ATH6KL_USES_PREALLOCATE_MEM
wlan_init_memory();
#endif
/* NV mac init */
msm_read_nv(NV_ITEM_WLAN_MAC_ADDR,wlan_mac_addr);
printk("MAC from NV %02X:%02X:%02X:%02X:%02X:%02X\n",
wlan_mac_addr[0], wlan_mac_addr[1], wlan_mac_addr[2],
wlan_mac_addr[3], wlan_mac_addr[4], wlan_mac_addr[5]);
exit:
return rc;
}
void __init msm_fb_add_devices(void)
{
/* Using continuous splash or not */
if (machine_is_msm8625_qrd7() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5()) {
if (cont_splash_enabled) {
/* increase ref count of ext power */
qrd_lcd_splash_power_vote(1);
mdp_pdata.cont_splash_enabled = 1;
/* FIXME: Need these flags to indicate backlight driver the initial backlight level */
mipi_NT35510_pdata.cont_splash_enabled = 1;
mipi_NT35510_alaska_pdata.cont_splash_enabled = 1;
mipi_himax_pdata.cont_splash_enabled = 1;
}
}
/* default is NT35510 */
if (machine_is_msm8625_skua() && skua_panel_is_himax()) {
skua_fb_devices[1] = &mipi_dsi_himax_panel_device;
skua_backlight_device.dev.platform_data = &mipi_himax_pdata;
}
msm7x27a_set_display_params(prim_panel_name);
if (machine_is_msm8225_cellon())
platform_add_devices(c8680_fb_devices,
ARRAY_SIZE(c8680_fb_devices));
else if (machine_is_msm7627a_qrd1())
platform_add_devices(qrd_fb_devices,
ARRAY_SIZE(qrd_fb_devices));
else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a() ||
machine_is_msm8625_evt()) {
platform_add_devices(evb_fb_devices,
ARRAY_SIZE(evb_fb_devices));
} else if (machine_is_msm8625_skua())
platform_add_devices(skua_fb_devices,
ARRAY_SIZE(skua_fb_devices));
else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()) {
platform_add_devices(qrd3_fb_devices,
ARRAY_SIZE(qrd3_fb_devices));
} else
platform_add_devices(msm_fb_devices,
ARRAY_SIZE(msm_fb_devices));
msm_fb_register_device("mdp", &mdp_pdata);
if (machine_is_msm7625a_surf() || machine_is_msm7x27a_surf()
|| machine_is_msm8625_surf() || machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7())
msm_fb_register_device("lcdc", &lcdc_pdata);
#ifdef CONFIG_FB_MSM_MIPI_DSI
msm_fb_register_device("mipi_dsi", &mipi_dsi_pdata);
#endif
}
static int msm_fb_detect_panel(const char *name)
{
int ret = -ENODEV;
#if 1 // #suwg
printk("xxx %s:%s\n ",__func__,name);
return ret;
#endif
if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf() ||
machine_is_msm8625_surf()) {
if (!strncmp(name, "lcdc_toshiba_fwvga_pt", 21) ||
!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
ret = 0;
} else if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()
|| machine_is_msm8625_ffa()) {
if (!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
ret = 0;
} else if (machine_is_msm7627a_qrd1()) {
if (!strncmp(name, "mipi_video_truly_wvga", 21))
ret = 0;
} else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()) {
if (!strncmp(name, "lcdc_truly_hvga_ips3p2335_pt", 28))
ret = 0;
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
if (!strncmp(name, "mipi_cmd_nt35510_wvga", 21))
ret = 0;
} else if (machine_is_msm8625q_skud() || machine_is_msm8625q_evbd()) {
if (!strncmp(name, "mipi_video_hx8389b_qhd", 22))
ret = 0;
} else if (machine_is_msm8625q_skue()) {
if (!strncmp(name, "mipi_video_otm9605a_qhd", 23))
ret = 0;
}
#if !defined(CONFIG_FB_MSM_LCDC_AUTO_DETECT) && \
!defined(CONFIG_FB_MSM_MIPI_PANEL_AUTO_DETECT) && \
!defined(CONFIG_FB_MSM_LCDC_MIPI_PANEL_AUTO_DETECT)
if (machine_is_msm7x27a_surf() ||
machine_is_msm7625a_surf() ||
machine_is_msm8625_surf()) {
if (!strncmp(name, LCDC_TOSHIBA_FWVGA_PANEL_NAME,
strnlen(LCDC_TOSHIBA_FWVGA_PANEL_NAME,
PANEL_NAME_MAX_LEN)))
return 0;
}
#endif
return ret;
}
static int msm_fb_dsi_client_reset(void)
{
int rc = 0;
if (machine_is_msm7627a_qrd1())
rc = msm_fb_dsi_client_qrd1_reset();
else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
#if 1
rc = msm_fb_dsi_client_D9_reset();
#else
rc = msm_fb_dsi_client_qrd3_reset();
#endif
else if (machine_is_msm8625q_skud())
static void gpio_wlan_config(void)
{
if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5()
|| machine_is_msm7x27a_qrd5a()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7())
gpio_wlan_sys_rest_en = 124;
else if(machine_is_msm8625q_evbd()
|| machine_is_msm8625q_skue()
|| machine_is_msm8625q_skud())
gpio_wlan_sys_rest_en = 124;
}
static int msm_fb_detect_panel(const char *name)
{
int ret = -ENODEV;
if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf() ||
machine_is_msm8625_surf()) {
if (!strncmp(name, "lcdc_toshiba_fwvga_pt", 21) ||
!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
ret = 0;
} else if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()
|| machine_is_msm8625_ffa()) {
if (!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
ret = 0;
} else if (machine_is_msm7627a_qrd1()) {
if (!strncmp(name, "mipi_video_truly_wvga", 21))
ret = 0;
} else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()) {
if (!strncmp(name, "lcdc_truly_hvga_ips3p2335_pt", 28))
ret = 0;
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
#if 1 //#linxc 12-08-23 +++
if (!strncmp(name, "mipi_cmd_novatek_sharp_qhd", 26))
ret = 0;
#else
if (!strncmp(name, "mipi_cmd_nt35510_wvga", 21))
ret = 0;
#endif
} else if (machine_is_msm8625q_skud()) {
if (!strncmp(name, "mipi_video_hx8389b_qhd", 22))
ret = 0;
}
#if !defined(CONFIG_FB_MSM_LCDC_AUTO_DETECT) && \
!defined(CONFIG_FB_MSM_MIPI_PANEL_AUTO_DETECT) && \
!defined(CONFIG_FB_MSM_LCDC_MIPI_PANEL_AUTO_DETECT)
if (machine_is_msm7x27a_surf() ||
machine_is_msm7625a_surf() ||
machine_is_msm8625_surf()) {
if (!strncmp(name, LCDC_TOSHIBA_FWVGA_PANEL_NAME,
strnlen(LCDC_TOSHIBA_FWVGA_PANEL_NAME,
PANEL_NAME_MAX_LEN)))
return 0;
}
#endif
return ret;
}
static int mipi_dsi_panel_power(int on)
{
int rc = 0;
if (machine_is_msm7627a_qrd1())
rc = mipi_dsi_panel_qrd1_power(on);
else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a() ||
machine_is_msm8625_evt())
rc = mipi_dsi_panel_qrd3_power(on);
else if(machine_is_msm8625_skua())
rc = mipi_dsi_panel_skua_power(on);
else
rc = mipi_dsi_panel_msm_power(on);
return rc;
}
static int msm_fb_dsi_client_reset(void)
{
int rc = 0;
if (machine_is_msm7627a_qrd1())
rc = msm_fb_dsi_client_qrd1_reset();
else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5()|| machine_is_msm7x27a_qrd5a() ||
machine_is_msm8625_evt())
rc = msm_fb_dsi_client_qrd3_reset();
else if (machine_is_msm8625_skua())
rc = msm_fb_dsi_client_skua_reset();
else
rc = msm_fb_dsi_client_msm_reset();
return rc;
}
static void gpio_wlan_config(void)
{
if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5()
|| machine_is_msm7x27a_qrd5a()
|| machine_is_msm8625_skua()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7())
#ifndef CONFIG_CELLON_PRJ_C8681
gpio_wlan_sys_rest_en = 124;
#else
gpio_wlan_sys_rest_en = 16;
#endif
pr_info("wlan rest gpio - %d\n", gpio_wlan_sys_rest_en);
}
static int tricolor_leds_gpio_setup(void) {
int ret = 0;
if(machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
{
tricolor_leds_gpio_cfg_data[0].gpio_cfg = GPIO_CFG(LED_FLASH_EN1, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA);
}
else if(machine_is_msm8625_qrd7())
{
tricolor_leds_gpio_cfg_data[0].gpio_cfg = GPIO_CFG(QRD7_LED_FLASH_EN, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA);
}
ret = msm_gpios_request_enable(tricolor_leds_gpio_cfg_data,
sizeof(tricolor_leds_gpio_cfg_data)/sizeof(struct msm_gpio));
if( ret<0 )
printk(KERN_ERR "%s: Failed to obtain tricolor_leds GPIO . Code: %d\n",
__func__, ret);
return ret;
}
static void gpio_wlan_config(void)
{
if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5()
|| machine_is_msm7x27a_qrd5a()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7())
gpio_wlan_sys_rest_en = 124;
else if(machine_is_msm8625q_evbd()
|| machine_is_msm8625q_skue()
|| machine_is_msm8625q_skud())
/*TYDRV:chenjp 2012.12.26 modify for QCT support*/
#if defined(TYQ_QCT_SUPPORT)
gpio_wlan_sys_rest_en = 124;
#else
gpio_wlan_sys_rest_en = 38;
#endif
}
static void gpio_bt_config(void)
{
u32 socinfo = socinfo_get_platform_version();
if (machine_is_msm7627a_qrd1())
gpio_bt_sys_rest_en = 114;
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
gpio_bt_sys_rest_en = 16;
if(machine_is_msm8625q_skud() || machine_is_msm8625q_skue() || machine_is_msm8625q_evbd())
gpio_bt_sys_rest_en = 35;
if (machine_is_msm8625_qrd7())
gpio_bt_sys_rest_en = 88;
if (machine_is_msm7627a_qrd3()) {
if (socinfo == 0x70002)
gpio_bt_sys_rest_en = 88;
else
gpio_bt_sys_rest_en = 85;
}
}
static int msm_fb_dsi_client_reset(void)
{
int rc = 0;
#if 1 // #suwg.
printk("xxx %s \n",__func__);
return rc;
#endif
if (machine_is_msm7627a_qrd1())
rc = msm_fb_dsi_client_qrd1_reset();
else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
rc = msm_fb_dsi_client_qrd3_reset();
else if (machine_is_msm8625q_skud() || machine_is_msm8625q_evbd())
rc = msm_fb_dsi_client_skud_reset();
else if (machine_is_msm8625q_skue())
rc = msm_fb_dsi_client_skue_reset();
else
rc = msm_fb_dsi_client_msm_reset();
return rc;
}
static int mpu3050_gpio_setup(void) {
int ret = 0;
ret = msm_gpios_request_enable(mpu3050_gpio_cfg_data,
sizeof(mpu3050_gpio_cfg_data)/sizeof(struct msm_gpio));
if( ret<0 )
printk(KERN_ERR "Failed to obtain mpu3050 int GPIO!\n");
else
printk("mpu3050 int GPIO request!\n");
if(machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a() ) {
if (ARRAY_SIZE(mpu3050_boardinfo_qrd5))
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
mpu3050_boardinfo_qrd5,
ARRAY_SIZE(mpu3050_boardinfo_qrd5));
} else {
if (ARRAY_SIZE(mpu3050_boardinfo))
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
mpu3050_boardinfo,
ARRAY_SIZE(mpu3050_boardinfo));
}
printk("i2c_register_board_info for MPU3050\n");
return ret;
}
void __init msm_fb_add_devices(void)
{
int rc = 0;
#if 1 // #suwg.
printk("xxx %s \n",__func__);
printk("machine_is_msm7627a_qrd1 %d\n",machine_is_msm7627a_qrd1());
printk("machine_is_msm8625q_skud %d\n",machine_is_msm8625q_skud());
printk("machine_is_msm7x27a_qrd5a %d\n",machine_is_msm7x27a_qrd5a());
printk("machine_is_msm8625_qrd5 %d\n",machine_is_msm8625_qrd5());
printk("disable_splash %d\n",disable_splash);
msm7x27a_set_display_params(prim_panel_name);
if (disable_splash)
mdp_pdata.cont_splash_enabled = 0x0;
platform_add_devices(odmm_fb_devices, ARRAY_SIZE(odmm_fb_devices));
msm_fb_register_device("mdp", &mdp_pdata);
//#ifdef CONFIG_FB_MSM_MIPI_DSI
msm_fb_register_device("mipi_dsi", &mipi_dsi_pdata);
//#endif
return;
#endif
msm7x27a_set_display_params(prim_panel_name);
if (machine_is_msm7627a_qrd1())
platform_add_devices(qrd_fb_devices,
ARRAY_SIZE(qrd_fb_devices));
else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
mipi_NT35510_pdata.bl_lock = 1;
mipi_NT35516_pdata.bl_lock = 1;
if (disable_splash)
mdp_pdata.cont_splash_enabled = 0x0;
platform_add_devices(evb_fb_devices,
ARRAY_SIZE(evb_fb_devices));
} else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()) {
sku3_lcdc_lcd_camera_power_init();
mdp_pdata.cont_splash_enabled = 0x0;
platform_add_devices(qrd3_fb_devices,
ARRAY_SIZE(qrd3_fb_devices));
} else if (machine_is_msm8625q_skud() || machine_is_msm8625q_evbd()) {
if (disable_splash)
mdp_pdata.cont_splash_enabled = 0x0;
/* SKUD and SKUD' use different lane connection */
if (cpu_is_msm8625q()){
if(!strncmp((char *)prim_panel_name, "mipi_video_hx8392a_720p", 23))
mipi_dsi_pdata.dlane_swap = 3;
else
mipi_dsi_pdata.dlane_swap = 0;
pr_info("[DISP] The prim panel name is %s, Swap lane is %d\n", prim_panel_name,mipi_dsi_pdata.dlane_swap);
}
platform_add_devices(skud_fb_devices,
ARRAY_SIZE(skud_fb_devices));
} else if (machine_is_msm8625q_skue()) {
if (disable_splash)
mdp_pdata.cont_splash_enabled = 0x0;
/* SKUE and SKUE' use different lane connection */
if (cpu_is_msm8625q())
mipi_dsi_pdata.dlane_swap = 0;
platform_add_devices(skue_fb_devices,
ARRAY_SIZE(skue_fb_devices));
} else {
mdp_pdata.cont_splash_enabled = 0x0;
platform_add_devices(msm_fb_devices,
ARRAY_SIZE(msm_fb_devices));
}
msm_fb_register_device("mdp", &mdp_pdata);
if (machine_is_msm7625a_surf() || machine_is_msm7x27a_surf() ||
machine_is_msm8625_surf() || machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7())
msm_fb_register_device("lcdc", &lcdc_pdata);
#ifdef CONFIG_FB_MSM_MIPI_DSI
msm_fb_register_device("mipi_dsi", &mipi_dsi_pdata);
#endif
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()
|| machine_is_msm8625q_evbd()) {
gpio_reg_2p85v = regulator_get(&mipi_dsi_device.dev,
"lcd_vdd");
if (IS_ERR(gpio_reg_2p85v))
pr_err("%s:ext_2p85v regulator get failed", __func__);
gpio_reg_1p8v = regulator_get(&mipi_dsi_device.dev,
"lcd_vddi");
if (IS_ERR(gpio_reg_1p8v))
pr_err("%s:ext_1p8v regulator get failed", __func__);
if (mdp_pdata.cont_splash_enabled) {
/*Enable EXT_2.85 and 1.8 regulators*/
rc = regulator_enable(gpio_reg_2p85v);
if (rc < 0)
pr_err("%s: reg enable failed\n", __func__);
rc = regulator_enable(gpio_reg_1p8v);
if (rc < 0)
pr_err("%s: reg enable failed\n", __func__);
}
}
}
void __init msm7627a_sensor_init(void)
{
#ifdef CONFIG_AVAGO_APDS990X
if (machine_is_msm8625_skua() || machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a() ) {
apds990x_setup();
}
#endif
#ifdef CONFIG_MPU_SENSORS_MPU3050
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
mpu3050_gpio_setup();
}
#endif
#ifdef CONFIG_BOSCH_BMA250
if (machine_is_msm8625_qrd7()) {
pr_info("i2c_register_board_info BMA250 ACC\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
bma250_i2c_info,
ARRAY_SIZE(bma250_i2c_info));
}
#endif
#ifdef CONFIG_CELLON_PRJ_C8681
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
tps61310_i2c_info,
ARRAY_SIZE(tps61310_i2c_info));
#endif
#ifdef CONFIG_GSENSOR_BMA2X2
pr_info("i2c_register_board_info BMA2X2 ACC\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
bma2x2_i2c_info,
ARRAY_SIZE(bma2x2_i2c_info));
#endif
#ifdef CONFIG_GSENSOR_MC32X0
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
mc32x0_i2c_info,
ARRAY_SIZE(mc32x0_i2c_info));
#endif
#ifdef CONFIG_SENSORS_MMA845X
pr_info("i2c_register_board_info mma8452 ACC\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
mma8452_i2c_info,
ARRAY_SIZE(mma8452_i2c_info));
#endif
#ifdef CONFIG_GSENSOR_LIS3DH
pr_info("i2c_register_board_info lis3dh_acc ACC\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
lis3dh_acc_i2c_info,
ARRAY_SIZE(lis3dh_acc_i2c_info));
#endif
#ifdef CONFIG_INPUT_LTR502
if (machine_is_msm8625_qrd7()) {
pr_info("i2c_register_board_info LTR502\n");
ltr502_light_gpio_setup();
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
ltr502_light_i2c_info,
ARRAY_SIZE(ltr502_light_i2c_info));
}
#endif
#ifdef CONFIG_INPUT_LTR558
pr_info("i2c_register_board_info LTR558\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
ltr558_light_i2c_info,
ARRAY_SIZE(ltr558_light_i2c_info));
#endif
#if defined(CONFIG_INPUT_PS31XX)
printk("i2c_register_board_info PS31XX\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
ps31xx_light_i2c_info,
ARRAY_SIZE(ps31xx_light_i2c_info));
#endif
#ifdef CONFIG_INPUT_TMD27713
taos_init_irq();
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
tmd27713_gpio_i2c_board_info,
ARRAY_SIZE(tmd27713_gpio_i2c_board_info));
#endif
#ifdef CONFIG_SENSORS_AK8975
if (machine_is_msm8625_qrd7()) {
pr_info("i2c_register_board_info AKM8975\n");
akm_gpio_setup();
akm_platform_data_8975.gpio_DRDY = 18;
akm8975_i2c_info[0].irq = gpio_to_irq(akm_platform_data_8975.gpio_DRDY);
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
akm8975_i2c_info,
ARRAY_SIZE(akm8975_i2c_info));
}
#endif
#ifdef CONFIG_SENSORS_AK8963
pr_info("i2c_register_board_info AKM8963\n");
akm_gpio_setup();
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
akm8963_i2c_info,
ARRAY_SIZE(akm8963_i2c_info));
#endif
#ifdef CONFIG_INPUT_KXTJ9
if(machine_is_msm8625_skua()) {
pr_info("i2c_register_board_info KXTJ9\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
accel_kxtj9_i2c_info,
ARRAY_SIZE(accel_kxtj9_i2c_info));
}
#endif
}
static unsigned int msm_AR600X_shutdown_power(bool on)
{
int rc = 0;
/* Disable the A0 clock */
rc = setup_wlan_clock(on);
if (rc) {
pr_err("%s: setup_wlan_clock = %d\n", __func__, rc);
goto set_clock_fail;
}
/*
* gpio_wlan_sys_rest_en is not from the GPIO expander for QRD7627a,
* EVB1.0 and QRD8625,so the below step is required for those devices.
*/
if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5()
|| machine_is_msm7x27a_qrd5a()
|| machine_is_msm8625_skua()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7()) {
rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
__func__, rc);
goto gpio_fail;
}
gpio_set_value(gpio_wlan_sys_rest_en, 0);
} else {
rc = gpio_request(gpio_wlan_sys_rest_en, "WLAN_DEEP_SLEEP_N");
if (!rc) {
rc = setup_wlan_gpio(on);
if (rc) {
pr_err("%s: setup_wlan_gpio = %d\n",
__func__, rc);
goto set_gpio_fail;
}
gpio_free(gpio_wlan_sys_rest_en);
}
}
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1()) {
rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
__func__, rc);
goto qrd_gpio_fail;
}
gpio_set_value(GPIO_WLAN_3V3_EN, 0);
}
rc = wlan_switch_regulators(on);
if (rc) {
pr_err("%s: wlan_switch_regulators error = %d\n",
__func__, rc);
goto reg_disable;
}
pr_info("WLAN power-down success\n");
return 0;
set_clock_fail:
setup_wlan_clock(0);
set_gpio_fail:
setup_wlan_gpio(0);
gpio_fail:
gpio_free(gpio_wlan_sys_rest_en);
qrd_gpio_fail:
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1())
gpio_free(GPIO_WLAN_3V3_EN);
reg_disable:
wlan_switch_regulators(0);
pr_info("WLAN power-down failed\n");
return rc;
}
static unsigned int msm_AR600X_setup_power(bool on)
{
int rc = 0;
static bool init_done;
if (unlikely(!init_done)) {
gpio_wlan_config();
rc = qrf6285_init_regs();
if (rc) {
pr_err("%s: qrf6285 init failed = %d\n", __func__, rc);
return rc;
} else {
init_done = true;
}
}
rc = wlan_switch_regulators(on);
if (rc) {
pr_err("%s: wlan_switch_regulators error = %d\n", __func__, rc);
goto out;
}
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1()) {
rc = gpio_tlmm_config(GPIO_CFG(GPIO_WLAN_3V3_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
__func__, rc);
goto reg_disable;
}
gpio_set_value(GPIO_WLAN_3V3_EN, 1);
}
/*
* gpio_wlan_sys_rest_en is not from the GPIO expander for QRD7627a,
* EVB1.0 and QRD8625,so the below step is required for those devices.
*/
if (machine_is_msm7627a_qrd1() || machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5()
|| machine_is_msm7x27a_qrd5a()
|| machine_is_msm8625_skua()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7()) {
rc = gpio_tlmm_config(GPIO_CFG(gpio_wlan_sys_rest_en, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s gpio_tlmm_config 119 failed,error = %d\n",
__func__, rc);
goto qrd_gpio_fail;
}
gpio_set_value(gpio_wlan_sys_rest_en, 1);
} else {
rc = gpio_request(gpio_wlan_sys_rest_en, "WLAN_DEEP_SLEEP_N");
if (rc) {
pr_err("%s: WLAN sys_rest_en GPIO %d request failed %d\n",
__func__,
gpio_wlan_sys_rest_en, rc);
goto qrd_gpio_fail;
}
rc = setup_wlan_gpio(on);
if (rc) {
pr_err("%s: wlan_set_gpio = %d\n", __func__, rc);
goto gpio_fail;
}
gpio_free(gpio_wlan_sys_rest_en);
}
/* Enable the A0 clock */
rc = setup_wlan_clock(on);
if (rc) {
pr_err("%s: setup_wlan_clock = %d\n", __func__, rc);
goto set_gpio_fail;
}
/* Configure A0 clock to be slave to WLAN_CLK_PWR_REQ */
rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_A0,
PMAPP_CLOCK_VOTE_PIN_CTRL);
if (rc) {
pr_err("%s: Configuring A0 to Pin controllable failed %d\n",
__func__, rc);
goto set_clock_fail;
}
pr_info("WLAN power-up success\n");
return 0;
set_clock_fail:
setup_wlan_clock(0);
set_gpio_fail:
setup_wlan_gpio(0);
gpio_fail:
gpio_free(gpio_wlan_sys_rest_en);
qrd_gpio_fail:
/* GPIO_WLAN_3V3_EN is only required for the QRD7627a */
if (machine_is_msm7627a_qrd1())
gpio_free(GPIO_WLAN_3V3_EN);
reg_disable:
wlan_switch_regulators(0);
out:
pr_info("WLAN power-up failed\n");
return rc;
}
static int msm_fb_detect_panel(const char *name)
{
int ret = -ENODEV;
printk("%s: %d\n", __func__, __LINE__);
if (machine_is_msm8225_cellon()) {
ret = cellon_auto_detect_lcd_panel(name);
} else if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf() ||
machine_is_msm8625_surf()) {
if (!strncmp(name, "lcdc_toshiba_fwvga_pt", 21) ||
!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
ret = 0;
} else if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()
|| machine_is_msm8625_ffa()) {
if (!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
ret = 0;
} else if (machine_is_msm7627a_qrd1()) {
if (!strncmp(name, "mipi_video_truly_wvga", 21))
ret = 0;
} else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()) {
if (!strncmp(name, "lcdc_truly_hvga_ips3p2335_pt", 28))
ret = 0;
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
if (cont_splash_enabled == 1) {
if (!strncmp(name, "mipi_cmd_nt35510_wvga", 21))
ret = 0;
} else if (cont_splash_enabled == 2) {
if (!strncmp(name, "mipi_video_nt35510_wvga", 21))
ret = 0;
} else {
if (!strncmp(name, "mipi_cmd_nt35510_wvga", 21))
ret = 0;
}
} else if (machine_is_msm8625_skua()) {
if (!strncmp(name, "mipi_video_himax_wvga", 21) && skua_panel_is_himax())
ret = 0;
else if (!strncmp(name, "mipi_cmd_nt35510_alaska_wvga", 28) && !skua_panel_is_himax())
ret = 0;
} else if (machine_is_msm8625_evt()) {
if (!strncmp(name, "mipi_video_nt35510_wvga", 23))
ret = 0;
}
#if !defined(CONFIG_FB_MSM_LCDC_AUTO_DETECT) && \
!defined(CONFIG_FB_MSM_MIPI_PANEL_AUTO_DETECT) && \
!defined(CONFIG_FB_MSM_LCDC_MIPI_PANEL_AUTO_DETECT)
if (machine_is_msm7x27a_surf() ||
machine_is_msm7625a_surf() ||
machine_is_msm8625_surf()) {
if (!strncmp(name, LCDC_TOSHIBA_FWVGA_PANEL_NAME,
strnlen(LCDC_TOSHIBA_FWVGA_PANEL_NAME,
PANEL_NAME_MAX_LEN)))
return 0;
}
#endif
return ret;
}
static int msm_fb_dsi_client_qrd3_reset(void)
{
int rc = 0;
pr_debug("%s: cont_splash_enabled = %d\n", __func__, cont_splash_enabled);
rc = gpio_request(GPIO_QRD3_LCD_BRDG_RESET_N, "qrd3_lcd_brdg_reset_n");
if (rc < 0) {
pr_err("Failed to request qrd3_lcd_brdg_reset_n\n");
return rc;
}
rc = gpio_tlmm_config(qrd3_mipi_dsi_gpio[0], GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("Failed to config qrd3_gpio_bkl_en\n");
goto gpio_fail1;
}
if (!cont_splash_enabled)
rc = gpio_direction_output(GPIO_QRD3_LCD_BRDG_RESET_N, 0);
else
rc = gpio_direction_output(GPIO_QRD3_LCD_BRDG_RESET_N, 1);
if (rc < 0) {
pr_err("Failed to direction qrd3_gpio_bkl_en\n");
goto gpio_fail1;
}
rc = gpio_request(GPIO_QRD3_LCD_BACKLIGHT_EN,
"qrd3_gpio_bkl_en");
if (rc < 0) {
pr_err("Failed to request qrd3_gpio_bkl_en\n");
goto gpio_fail1;
}
if((machine_is_msm8625_qrd5() && hw_version_is(3, 0)) || (machine_is_msm7x27a_qrd5a() && hw_version_is(3, 0))) {
rc = gpio_tlmm_config(qrd3_mipi_dsi_gpio[2], GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("Failed to config qrd3_gpio_bkl_en\n");
goto gpio_fail2;
}
rc = gpio_direction_input(GPIO_QRD3_LCD_BACKLIGHT_EN);
if (rc < 0) {
pr_err("Failed to direction qrd3_gpio_bkl_en\n");
goto gpio_fail2;
}
} else {
rc = gpio_tlmm_config(qrd3_mipi_dsi_gpio[1], GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("Failed to config qrd3_gpio_bkl_en\n");
goto gpio_fail2;
}
if (!cont_splash_enabled)
rc = gpio_direction_output(GPIO_QRD3_LCD_BACKLIGHT_EN, 0);
else
rc = gpio_direction_output(GPIO_QRD3_LCD_BACKLIGHT_EN, 1);
if (rc < 0) {
pr_err("Failed to direction qrd3_gpio_bkl_en\n");
goto gpio_fail2;
}
}
return rc;
gpio_fail2:
gpio_free(GPIO_QRD3_LCD_BACKLIGHT_EN);
gpio_fail1:
gpio_free(GPIO_QRD3_LCD_BRDG_RESET_N);
return rc;
}
void __init msm7627a_sensor_init(void)
{
#ifdef CONFIG_AVAGO_APDS990X
if ( machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
pr_info("i2c_register_board_info APDS990X\n");
apds990x_setup();
}
#endif
#ifdef CONFIG_MPU_SENSORS_MPU3050
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
pr_info("i2c_register_board_info MPU3050\n");
mpu3050_gpio_setup();
}
#endif
#ifdef CONFIG_BOSCH_BMA250
if (machine_is_msm8625_qrd7() || machine_is_msm7627a_qrd3() || machine_is_msm8625q_skud()) {
pr_info("i2c_register_board_info BMA250 ACC\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
bma250_i2c_info,
ARRAY_SIZE(bma250_i2c_info));
}
#endif
#ifdef CONFIG_INPUT_ISL29028
if (machine_is_msm8625q_skud()) {
pr_info("i2c_register_board_info ISL29028 ALP sensor!\n");
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
isl29028_i2c_info,
ARRAY_SIZE(isl29028_i2c_info));
}
#endif
#ifdef CONFIG_INPUT_LIS3DH
if (machine_is_msm8625q_skue()) {
lis3dh_acc_gpio_setup();
pr_info("i2c_register_board_info LIS3DH ACC\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
lis3dh_acc_i2c_info,
ARRAY_SIZE(lis3dh_acc_i2c_info));
}
#endif
#ifdef CONFIG_SENSORS_BMA250
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
bma250_i2c_info,
ARRAY_SIZE(bma250_i2c_info));
#endif
#ifdef CONFIG_SENSORS_BMM050
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
bmm050_i2c_info,
ARRAY_SIZE(bmm050_i2c_info));
#endif
#ifdef CONFIG_INPUT_LTR502
if (machine_is_msm8625_qrd7() || machine_is_msm7627a_qrd3()) {
pr_info("i2c_register_board_info LTR502\n");
ltr502_light_gpio_setup();
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
ltr502_light_i2c_info,
ARRAY_SIZE(ltr502_light_i2c_info));
}
#endif
#ifdef CONFIG_INPUT_LTR558_D9
printk("i2c_register_board_info LTR558 weiqingdan\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
ltr558_light_i2c_info,
ARRAY_SIZE(ltr558_light_i2c_info));
#endif
#ifdef CONFIG_SENSORS_AK8975
if (machine_is_msm8625_qrd7() || machine_is_msm7627a_qrd3() || machine_is_msm8625q_skud()) {
pr_info("i2c_register_board_info AKM8975\n");
akm_gpio_setup();
akm_platform_data_8975.gpio_DRDY = 18;
akm8975_i2c_info[0].irq = gpio_to_irq(akm_platform_data_8975.gpio_DRDY);
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
akm8975_i2c_info,
ARRAY_SIZE(akm8975_i2c_info));
}
#endif
#ifdef CONFIG_INPUT_KXTJ9
if(machine_is_msm8625_skua()) {
pr_info("i2c_register_board_info KXTJ9\n");
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
accel_kxtj9_i2c_info,
ARRAY_SIZE(accel_kxtj9_i2c_info));
}
#endif
}
void __init qrd7627a_add_io_devices(void)
{
int rc;
int i; //hanjue
/* touchscreen */
if (machine_is_msm7627a_qrd1()) {
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
synaptic_i2c_clearpad3k,
ARRAY_SIZE(synaptic_i2c_clearpad3k));
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
#if 1 //linxc 2012-12-21 +++
if (machine_is_msm8625_qrd5()) {
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
himax_ts_i2c_info,
ARRAY_SIZE(himax_ts_i2c_info));
}
#else
/* Use configuration data for sku5 */
if (machine_is_msm8625_qrd5()) {
mxt_config_array[0].config = mxt_config_data_qrd5;
mxt_config_array[0].config_length =
ARRAY_SIZE(mxt_config_data_qrd5);
mxt_platform_data.panel_maxy = 875;
mxt_platform_data.need_calibration = true;
mxt_vkey_setup();
}
if (machine_is_msm7x27a_qrd5a()) {
mxt_config_array[0].config = mxt_config_data_qrd5a;
mxt_config_array[0].config_length =
ARRAY_SIZE(mxt_config_data_qrd5a);
mxt_platform_data.panel_maxy = 875;
mxt_vkey_setup();
}
rc = gpio_tlmm_config(GPIO_CFG(MXT_TS_IRQ_GPIO, 0,
GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, MXT_TS_IRQ_GPIO);
}
rc = gpio_tlmm_config(GPIO_CFG(MXT_TS_RESET_GPIO, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, MXT_TS_RESET_GPIO);
}
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
mxt_device_info,
ARRAY_SIZE(mxt_device_info));
#endif //linxc 2012-12-21 ---
} else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7() || machine_is_msm8625q_skud() || machine_is_msm8625q_skue()) {
ft5x06_touchpad_setup();
}
/* headset */
platform_device_register(&hs_pdev);
/* vibrator */
#ifdef CONFIG_MSM_RPC_VIBRATOR
msm_init_pmic_vibrator();
#endif
//add by hanjue
/* change the keymap for qrd sku5 */
if(machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
kp_matrix_info_8625.keymap = keymap_8625_qrd5;
kp_matrix_info_8625.output_gpios = kp_row_gpios_8625_qrd5;
kp_matrix_info_8625.noutputs = ARRAY_SIZE(kp_row_gpios_8625_qrd5);
for (i = 0; i < kp_matrix_info_8625.noutputs; i++) {
rc = gpio_tlmm_config(GPIO_CFG(kp_matrix_info_8625.output_gpios[i], 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, kp_matrix_info_8625.output_gpios[i]);
}
}
for (i = 0; i < kp_matrix_info_8625.ninputs; i++) {
rc = gpio_tlmm_config(GPIO_CFG(kp_matrix_info_8625.input_gpios[i], 0,
GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_2MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, kp_matrix_info_8625.input_gpios[i]);
}
}
}
/* keypad */
if (machine_is_msm7627a_evb() ||
machine_is_msm8625_evb()||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a() ||
machine_is_msm8625_qrd7())
platform_device_register(&kp_pdev_8625);
else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7())
platform_device_register(&kp_pdev_qrd3);
else if (machine_is_msm8625q_skud())
platform_device_register(&kp_pdev_skud);
#if 0
/* keypad */
if (machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
kp_matrix_info_8625.keymap = keymap_8625_qrd5;
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
platform_device_register(&kp_pdev_8625);
else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7())
platform_device_register(&kp_pdev_qrd3);
else if (machine_is_msm8625q_skud())
platform_device_register(&kp_pdev_skud);
#endif
/*start by lf 2012.12.26 */
#if 0
/* leds */
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
platform_device_register(&pmic_mpp_leds_pdev);
platform_device_register(&tricolor_leds_pdev);
} else if (machine_is_msm8625q_skud()) {
platform_device_register(&pmic_mpp_leds_pdev_skud);
/* enable the skud flash and torch by gpio leds driver */
platform_device_register(&gpio_flash_skud);
}
#endif
/*end by lf 2012.12.26 */
#ifdef CONFIG_LEDS_TRICOLOR_FLAHSLIGHT
/*tricolor leds init*/
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
platform_device_register(&msm_device_tricolor_leds);
tricolor_leds_gpio_setup();
}
#endif
}
static int msm_fb_detect_panel(const char *name)
{
int ret = -ENODEV;
if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf() ||
machine_is_msm8625_surf()) {
if (!strncmp(name, "lcdc_toshiba_fwvga_pt", 21) ||
!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
ret = 0;
} else if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()
|| machine_is_msm8625_ffa()) {
if (!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
ret = 0;
} else if (machine_is_msm7627a_qrd1()) {
if (!strncmp(name, "mipi_video_truly_wvga", 21))
ret = 0;
} else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()) {
if (!strncmp(name, "lcdc_truly_hvga_ips3p2335_pt", 28))
ret = 0;
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
if (cont_splash_enabled == 1) {
#if defined CONFIG_FB_MSM_MIPI_TCL_TD_TNFW4602_2_VIDEO_MODE
if (!strncmp(name, LCD_MODULE_NAME, strlen(LCD_MODULE_NAME)))
#else
if (!strncmp(name, "mipi_cmd_nt35510_wvga", 21))
#endif
ret = 0;
} else if (cont_splash_enabled == 2) {
#if defined CONFIG_FB_MSM_MIPI_TCL_TD_TNFW4602_2_VIDEO_MODE
if (!strncmp(name, LCD_MODULE_NAME, strlen(LCD_MODULE_NAME)))
#else
if (!strncmp(name, "mipi_cmd_nt35510_wvga", 21))
#endif
ret = 0;
} else {
#if defined CONFIG_FB_MSM_MIPI_TCL_TD_TNFW4602_2_VIDEO_MODE
if (!strncmp(name, LCD_MODULE_NAME, strlen(LCD_MODULE_NAME)))
#else
if (!strncmp(name, "mipi_cmd_nt35510_wvga", 21))
#endif
ret = 0;
}
} else if (machine_is_msm8625_skua()) {
if (!strncmp(name, "mipi_video_himax_wvga", 21) && skua_panel_is_himax())
ret = 0;
else if (!strncmp(name, "mipi_cmd_nt35510_alaska_wvga", 28) && !skua_panel_is_himax())
ret = 0;
} else if (machine_is_msm8625_evt()) {
if (!strncmp(name, "mipi_video_nt35510_wvga", 23))
ret = 0;
}
#if !defined(CONFIG_FB_MSM_LCDC_AUTO_DETECT) && \
!defined(CONFIG_FB_MSM_MIPI_PANEL_AUTO_DETECT) && \
!defined(CONFIG_FB_MSM_LCDC_MIPI_PANEL_AUTO_DETECT)
if (machine_is_msm7x27a_surf() ||
machine_is_msm7625a_surf() ||
machine_is_msm8625_surf()) {
if (!strncmp(name, LCDC_TOSHIBA_FWVGA_PANEL_NAME,
strnlen(LCDC_TOSHIBA_FWVGA_PANEL_NAME,
PANEL_NAME_MAX_LEN)))
return 0;
}
#endif
return ret;
}
static void msm7627a_add_io_devices(void)
{
int rc;
/* touchscreen */
if (machine_is_msm7627a_qrd1()) {
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
synaptic_i2c_clearpad3k,
ARRAY_SIZE(synaptic_i2c_clearpad3k));
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
if (machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
mxt_config_array[0].config = mxt_config_data_qrd5;
mxt_config_array[0].config_length = ARRAY_SIZE(mxt_config_data_qrd5);
mxt_touchpad_setup();
}
rc = gpio_tlmm_config(GPIO_CFG(MXT_TS_IRQ_GPIO, 0,
GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, MXT_TS_IRQ_GPIO);
}
rc = gpio_tlmm_config(GPIO_CFG(MXT_TS_RESET_GPIO, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, MXT_TS_RESET_GPIO);
}
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
mxt_device_info,
ARRAY_SIZE(mxt_device_info));
}else if (machine_is_msm7627a_qrd3() ||
machine_is_msm8625_skua() ||
machine_is_msm8625_qrd7()){
ft5x06_touchpad_setup();
}
/* headset */
platform_device_register(&hs_pdev);
/* vibrator */
#ifdef CONFIG_MSM_RPC_VIBRATOR
msm_init_pmic_vibrator();
#endif
/* change the keymap for qrd sku5 */
if(machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
kp_matrix_info_8625.keymap = keymap_8625_qrd5;
/* keypad */
if (machine_is_msm7627a_evb() ||
machine_is_msm8625_evb()||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a() ||
machine_is_msm8625_qrd7() ||
machine_is_msm8625_skua())
platform_device_register(&kp_pdev_8625);
/* leds */
/* disable the AP leds
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5()) {
rc = gpio_tlmm_config(GPIO_CFG(LED_RED_GPIO_8625, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_16MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, LED_RED_GPIO_8625);
}
rc = gpio_tlmm_config(GPIO_CFG(LED_GREEN_GPIO_8625, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_16MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, LED_GREEN_GPIO_8625);
}
platform_device_register(&gpio_leds_8625);
}
*/
#ifdef CONFIG_LEDS_TRICOLOR_FLAHSLIGHT
/*tricolor leds init*/
tricolor_leds_gpio_setup();
#endif
}
static int mipi_dsi_panel_power(int on)
{
int rc = 0;
#if 1 // #suwg.
if(!odmm_dsi_gpio_initialized){
rc = gpio_request(ODMM_LCD_BACKLIGHT,
"odmm_gpio_bkl_en");
if (rc < 0)
return rc;
rc = gpio_tlmm_config(GPIO_CFG(ODMM_LCD_BACKLIGHT, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (rc < 0) {
pr_err("failed odmm GPIO_BACKLIGHT_EN tlmm config\n");
return rc;
}
rc = gpio_direction_output(ODMM_LCD_BACKLIGHT, 1);
if (rc < 0) {
pr_err("failed to enable backlight\n");
gpio_free(ODMM_LCD_BACKLIGHT);
return rc;
}
rc = regulator_bulk_get(NULL, ARRAY_SIZE(odmm_regs_dsi), odmm_regs_dsi);
if (rc) {
pr_err("%s: could not get regulators: %d\n",
__func__, rc);
goto fail_gpio2;
}
rc = regulator_bulk_set_voltage(ARRAY_SIZE(odmm_regs_dsi),
odmm_regs_dsi);
if (rc) {
pr_err("%s: could not set voltages: %d\n",
__func__, rc);
goto fail_vreg;
}
rc = regulator_bulk_enable(ARRAY_SIZE(odmm_regs_dsi), odmm_regs_dsi);
// regulator_bulk_disable(ARRAY_SIZE(odmm_regs_dsi), odmm_regs_dsi);
if (rc)
pr_err("%s: could not %sable regulators: %d\n",
__func__, on ? "en" : "dis", rc);
odmm_dsi_gpio_initialized = 1;
}
return rc;
fail_vreg:
regulator_bulk_free(ARRAY_SIZE(odmm_regs_dsi), odmm_regs_dsi);
fail_gpio2:
gpio_free(ODMM_LCD_BACKLIGHT);
return rc;
#endif
if (machine_is_msm7627a_qrd1())
rc = mipi_dsi_panel_qrd1_power(on);
else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
rc = mipi_dsi_panel_qrd3_power(on);
else if (machine_is_msm8625q_skud())
rc = mipi_dsi_panel_skud_power(on);
else if (machine_is_msm8625q_evbd())
rc = mipi_dsi_panel_evbd_power(on);
else if (machine_is_msm8625q_skue())
rc = mipi_dsi_panel_skue_power(on);
else
rc = mipi_dsi_panel_msm_power(on);
return rc;
}
static void __init msm7627a_init_regulators(void)
{
int rc = 0;
printk("%s\n", __func__);
rc = platform_device_register(&msm_proccomm_regulator_dev);
if (rc)
pr_err("%s: could not register msm_proccomm_regulator_dev: %d\n",
__func__, rc);
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
rc = platform_device_register(&evb_device_ext_2v8_vreg);
if (rc)
pr_err("%s: could not register evb_device_ext_2v8_vreg: %d\n",
__func__, rc);
rc = platform_device_register(&evb_device_ext_1v8_vreg);
if (rc)
pr_err("%s: could not register evb_device_ext_1v8_vreg: %d\n",
__func__, rc);
} else if (machine_is_msm8625_qrd7()) {
rc = platform_device_register(&sku7_device_ext_2v8_vreg);
if (rc)
pr_err("%s: could not register sku7_device_ext_2v8_vreg: %d\n",
__func__, rc);
rc = platform_device_register(&sku7_device_ext_1v8_vreg);
if (rc)
pr_err("%s: could not register sku7_device_ext_1v8_vreg: %d\n",
__func__, rc);
} else if (machine_is_msm7627a_qrd3()) {
rc = platform_device_register(&sku3_device_ext_2v8_vreg);
if (rc)
pr_err("%s: could not register sku3_device_ext_2v8_vreg: %d\n",
__func__, rc);
rc = platform_device_register(&sku3_device_ext_1v8_vreg);
if (rc)
pr_err("%s: could not register sku3_device_ext_1v8_vreg: %d\n",
__func__, rc);
}
return;
}
void __init qrd7627a_add_io_devices(void)
{
int rc;
/* touchscreen */
if (machine_is_msm7627a_qrd1()) {
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
synaptic_i2c_clearpad3k,
ARRAY_SIZE(synaptic_i2c_clearpad3k));
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
/* Use configuration data for sku5 */
if (machine_is_msm8625_qrd5()) {
mxt_config_array[0].config = mxt_config_data_qrd5;
mxt_config_array[0].config_length =
ARRAY_SIZE(mxt_config_data_qrd5);
mxt_platform_data.panel_maxy = 875;
mxt_platform_data.need_calibration = true;
mxt_vkey_setup();
}
if (machine_is_msm7x27a_qrd5a()) {
mxt_config_array[0].config = mxt_config_data_qrd5a;
mxt_config_array[0].config_length =
ARRAY_SIZE(mxt_config_data_qrd5a);
mxt_platform_data.panel_maxy = 875;
mxt_vkey_setup();
}
rc = gpio_tlmm_config(GPIO_CFG(MXT_TS_IRQ_GPIO, 0,
GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, MXT_TS_IRQ_GPIO);
}
rc = gpio_tlmm_config(GPIO_CFG(MXT_TS_RESET_GPIO, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
if (rc) {
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, MXT_TS_RESET_GPIO);
}
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
mxt_device_info,
ARRAY_SIZE(mxt_device_info));
} else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()
|| machine_is_msm8625q_skud()
|| machine_is_msm8625q_evbd()
|| machine_is_msm8625q_skue()) {
ft5x06_touchpad_setup();
/* evbd+ can support synaptic as well */
if (machine_is_msm8625q_evbd() &&
(socinfo_get_platform_type() == 0x13)) {
/* for QPR EVBD+ with synaptic touch panel */
/* TODO: Add gpio request to the driver
to support proper dynamic touch detection */
gpio_tlmm_config(
GPIO_CFG(CLEARPAD3000_ATTEN_GPIO_EVBD_PLUS, 0,
GPIO_CFG_INPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
gpio_tlmm_config(
GPIO_CFG(CLEARPAD3000_RESET_GPIO, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
gpio_set_value(CLEARPAD3000_RESET_GPIO, 0);
usleep(10000);
gpio_set_value(CLEARPAD3000_RESET_GPIO, 1);
usleep(50000);
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
rmi4_i2c_devices,
ARRAY_SIZE(rmi4_i2c_devices));
}
}
/* headset */
platform_device_register(&hs_pdev);
/* vibrator */
#ifdef CONFIG_MSM_RPC_VIBRATOR
msm_init_pmic_vibrator();
#endif
/* keypad */
if (machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
kp_matrix_info_8625.keymap = keymap_8625_qrd5;
/* keypad info for EVBD+ */
if (machine_is_msm8625q_evbd() &&
(socinfo_get_platform_type() == 13)) {
gpio_tlmm_config(GPIO_CFG(37, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
gpio_tlmm_config(GPIO_CFG(42, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
gpio_tlmm_config(GPIO_CFG(31, 0,
GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
GPIO_CFG_8MA), GPIO_CFG_ENABLE);
kp_matrix_info_skud.output_gpios = kp_row_gpios_evbdp;
kp_matrix_info_skud.input_gpios = kp_col_gpios_evbdp;
kp_matrix_info_skud.noutputs = ARRAY_SIZE(kp_row_gpios_evbdp);
kp_matrix_info_skud.ninputs = ARRAY_SIZE(kp_col_gpios_evbdp);
}
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb() ||
machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a())
platform_device_register(&kp_pdev_8625);
else if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7())
platform_device_register(&kp_pdev_qrd3);
else if (machine_is_msm8625q_skud()||machine_is_msm8625q_evbd())
platform_device_register(&kp_pdev_skud);
else if (machine_is_msm8625q_skue())
platform_device_register(&kp_pdev_skue);
/* leds */
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
platform_device_register(&pmic_mpp_leds_pdev);
platform_device_register(&tricolor_leds_pdev);
} else if (machine_is_msm8625q_skud() || machine_is_msm8625q_evbd()) {
platform_device_register(&pmic_mpp_leds_pdev_skud);
/* enable the skud flash and torch by gpio leds driver */
platform_device_register(&gpio_flash_skud);
} else if (machine_is_msm8625q_skue()) {
/* enable the skue flashlight by gpio leds driver */
platform_device_register(&gpio_flash_skue);
}
#ifdef CONFIG_LEDS_TRICOLOR_FLAHSLIGHT
/*tricolor leds init*/
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_qrd5() || machine_is_msm7x27a_qrd5a()) {
platform_device_register(&msm_device_tricolor_leds);
tricolor_leds_gpio_setup();
}
#endif
}
