/* maniuplate the coordinata points of a path */
void T1_ManipulatePath( T1_OUTLINE *path,
void (*manipulate)(fractpel *x,fractpel *y,int type))
{
struct segment *ipath;
/* Step through the path list */
ipath=(struct segment *)path;
do {
if (ipath->type==LINETYPE){
manipulate( &(ipath->dest.x), &ipath->dest.y, LINETYPE);
#ifdef PRINT_PATHS_TO_STDOUT
printf("Line-Segment: -> (%f,%f)\n",
(ipath->dest.x)/(double)(0xFFFF),
-(ipath->dest.y)/(double)(0xFFFF));
#endif
}
if (ipath->type==MOVETYPE){
manipulate( &(ipath->dest.x), &ipath->dest.y, MOVETYPE);
#ifdef PRINT_PATHS_TO_STDOUT
printf("Move-Segment: -> (%f,%f)\n",
(ipath->dest.x)/(double)(0xFFFF),
-(ipath->dest.y)/(double)(0xFFFF));
#endif
}
if (ipath->type==BEZIERTYPE){
manipulate( &((struct beziersegment *)ipath)->B.x,
&((struct beziersegment *)ipath)->B.y,
BEZIERTYPE);
manipulate( &((struct beziersegment *)ipath)->C.x,
&((struct beziersegment *)ipath)->C.y,
BEZIERTYPE);
manipulate( &((struct beziersegment *)ipath)->dest.x,
&((struct beziersegment *)ipath)->dest.y,
BEZIERTYPE);
#ifdef PRINT_PATHS_TO_STDOUT
printf("Bezier-Segment: ... (%f,%f) ... (%f,%f) -> (%f,%f)\n",
(((struct beziersegment *)ipath)->B.x)/(double)(0xFFFF),
-(((struct beziersegment *)ipath)->B.y)/(double)(0xFFFF),
(((struct beziersegment *)ipath)->C.x)/(double)(0xFFFF),
-(((struct beziersegment *)ipath)->C.y)/(double)(0xFFFF),
(((struct beziersegment *)ipath)->dest.x)/(double)(0xFFFF),
-(((struct beziersegment *)ipath)->dest.y)/(double)(0xFFFF));
#endif
}
ipath=ipath->link;
} while (ipath!=NULL);
}
main()
{
int array[5];
*array=manipulate(array);
system("pause");
return (0);
}
int main(void)
{
// u8 t;
// u8 len;
// u16 times=0;
// float num;
start_configration();
//2016-07-25 增加内部校准 启动时的按键检测
SoftKeyValue = OnceSoftKey();//无消抖的获取按键值 ScanKey();//
if(SoftKeyValue==KEY_VALUE_5)//启动检测到func按键 置位校准标志位
{
SoftKeyValue = KEY_NULL;
Is_Cal_Mode = 1;
BUZZER_Open(0);delay_ms(1000);
BUZZER_Open(0);delay_ms(1000);
BUZZER_Open(0);delay_ms(1000);
BUZZER_Open(0);delay_ms(1000);
}
//旋转开关位置预检测
EXTI->IMR &= ~Keyboard_EXTI_Line;//屏蔽来自线上的中断请求，防止在定时器扫描矩阵键盘时进入此中断
TIM_Cmd(TIM3, ENABLE);//打开定时器3，在定时器作用下开始扫描矩阵键盘
//WriteEeprom();
//Self_Calibration();//在电阻档自检线路和放大器
// //液晶全亮
// Send(SetAddr,0x3B,0x00,0x8B);//设置LCD地址
// CheckReceive(SetAddr);//等待60ms，DTA从接收到发送完需要时间
// for(t=0;t<8;t++)
// {
// Send(WriteFwd,0xFF,0xFF+WriteFwd);
// CheckReceive(WriteFwd);
// }
while(1)
{
if(timer_1s_flag_for_Standby==1)//用于休眠计时
{
timer_1s_flag_for_Standby=0;
count_for_Standby++;//休眠计时+1s;
if(count_for_Standby==5400)//5min-300,10min-600,15min-900,20min-1200,25min-1500,30min-1800
{
lcd_clr();
StandbyMode_Measure();//进入休眠
// Power_Off_VDD();
}
}
if((RotaryKeyChanged_flag == 1) || (SoftKeyChanged_flag == 1))//有按键
{
count_for_Standby=0;//休眠计时清零
manipulate();
}
DataProcessing();//根据相应功能档配置DTA0660,并做当前档位的数据处理。
display();//液晶显示
Communication_Service();//蓝牙串口服务函数
}
return 0;
}
void CollisionActor::setValues(float d_t) {
manipulate(d_t);
moveConstraintMin = Ogre::Vector2::ZERO;
moveConstraintMax = Ogre::Vector2::ZERO;
}
static unsigned long
t3d_draw (Display *d, Window w, void *closure)
{
struct state *st = (struct state *) closure;
double dtime;
double vnorm;
/*--------------- Zeichenteil --------------*/
vektorprodukt(st->x,st->y,st->v);
vnorm=sqrt(st->v[0]*st->v[0]+st->v[1]*st->v[1]+st->v[2]*st->v[2]);
st->v[0]=st->v[0]*norm/vnorm;
st->v[1]=st->v[1]*norm/vnorm;
st->v[2]=st->v[2]*norm/vnorm;
vnorm=sqrt(st->x[0]*st->x[0]+st->x[1]*st->x[1]+st->x[2]*st->x[2]);
st->x[0]=st->x[0]*norm/vnorm;
st->x[1]=st->x[1]*norm/vnorm;
st->x[2]=st->x[2]*norm/vnorm;
vnorm=sqrt(st->y[0]*st->y[0]+st->y[1]*st->y[1]+st->y[2]*st->y[2]);
st->y[0]=st->y[0]*norm/vnorm;
st->y[1]=st->y[1]*norm/vnorm;
st->y[2]=st->y[2]*norm/vnorm;
projektion(st);
t3d_sort (st,0,st->maxk-1);
dtime=gettime(st);
if(st->cycl)
{
st->draw_color=(int)(64.0*(dtime/60-floor(dtime/60)))-32;
if(st->draw_color<0)
st->draw_color=-st->draw_color;
setink(st->colors[st->draw_color/3].pixel);
}
else
setink(BlackPixelOfScreen (st->xgwa.screen));
XFillRectangle(st->dpy,st->buffer,st->gc,0,0,st->scrnWidth,st->scrnHeight);
{
int i;
manipulate(st,dtime);
for (i=0;i<st->maxk;i++)
{
if (st->kugeln[i].d>0.0)
fill_kugel(st,i,st->buffer,1);
}
}
/* manipulate(gettime());
var+=PI/500;
if (var>=TWOPI) var=PI/500; */
if(st->hsvcycl!=0.0)
{
dtime=st->hsvcycl*dtime/10.0+st->hue/360.0;
dtime=360*(dtime-floor(dtime));
hsv2rgb(dtime,st->sat,st->val,&st->r,&st->g,&st->b);
changeColor(st,st->r,st->g,st->b);
}
XCopyArea (st->dpy, st->buffer, st->window, st->gc, 0, 0, st->scrnWidth, st->scrnHeight, 0, 0);
/*-------------------------------------------------*/
XQueryPointer (st->dpy, st->window, &st->junk_win, &st->in_win, &st->junk, &st->junk,
&st->px, &st->py, &st->kb);
if ((st->px>0)&&(st->px<st->scrnWidth)&&(st->py>0)&&(st->py<st->scrnHeight) )
{
if ((st->px !=st->startx)&&(st->kb&Button2Mask))
{
/* printf("y=(%f,%f,%f)",y[0],y[1],y[2]);*/
turn(st->y,st->x,((double)(st->px-st->startx))/(8000*st->mag));
/* printf("->(%f,%f,%f)\n",y[0],y[1],y[2]);*/
}
if ((st->py !=st->starty)&&(st->kb&Button2Mask))
{
/* printf("x=(%f,%f,%f)",x[0],x[1],x[2]);*/
turn(st->x,st->y,((double)(st->py-st->starty))/(-8000*st->mag));
/* printf("->(%f,%f,%f)\n",x[0],x[1],x[2]);*/
}
if ((st->kb&Button1Mask))
{
if (st->vturn==0.0) st->vturn=.005; else if (st->vturn<2) st->vturn+=.01;
turn(st->x,st->v,.002*st->vturn);
turn(st->y,st->v,.002*st->vturn);
}
if ((st->kb&Button3Mask))
{
if (st->vturn==0.0) st->vturn=.005; else if (st->vturn<2) st->vturn+=.01;
turn(st->x,st->v,-.002*st->vturn);
turn(st->y,st->v,-.002*st->vturn);
}
}
if (!(st->kb&Button1Mask)&&!(st->kb&Button3Mask))
st->vturn=0;
st->speed=st->speed+st->speed*st->vspeed;
if ((st->speed<0.0000001) &&(st->vspeed>0.000001)) st->speed=0.000001;
st->vspeed=.1*st->vspeed;
if (st->speed>0.01) st->speed=.01;
st->a[0]=st->a[0]+st->speed*st->v[0];
st->a[1]=st->a[1]+st->speed*st->v[1];
st->a[2]=st->a[2]+st->speed*st->v[2];
return st->timewait;
}