int main(void)
{
/* LEDS */
DDRB=0xFF;
/* uart*/
uart_init();
// kbd_init();
scheduler_init();
/* ajoute la scrutation du clavier */
// scheduler_add_periodical_event(kbd_get_pressed, 100);
/* envoie les caracteres du clavier vers l'uart */
// kbd_register_event(menu_control);
/* creation du device */
fdevopen( (int (*)(char)) uart0_send,
(int (*)(void))uart0_recv,
0);
// se place sur le 1er fils
menu_goto(menu_down(menu_current()));
menu_print();
sei();
while(1);
return 0;
}
int main(int argc, const char *argv[])
{
menu_init();
// top bar
menu_setvalue("NO McASP", OFFSET(0, 18), 8); // McASP
#ifdef DEBUG
menu_setvalue("1025", OFFSET(0, 79), 6); // inits
#endif
// audio input
menu_setvalue("E1", OFFSET(2, COL1), 2); // input reg
menu_setvalue("off", OFFSET(4, COL1), 3); // loopback
menu_setvalue("22", OFFSET(5, COL1), 3); // gain
menu_setvalue("med", OFFSET(6, COL1), 3); // bias
// audio output
menu_setvalue("G3", OFFSET(2, COL3), 2); // output reg
menu_setvalue("0", OFFSET(4, COL3), 1); // enable1
menu_setvalue("1", OFFSET(5, COL3), 1); // enable2
menu_setvalue("36", OFFSET(6, COL3), 2); // gain1
menu_setvalue("0", OFFSET(7, COL3), 2); // gain2
menu_setvalue("DC", OFFSET(8, COL3), 2); // coupling1
menu_setvalue("AC", OFFSET(9, COL3), 2); // coupling2
menu_print(OFFSET(6, COL1), 3, "%3f", 3.1415);
printf("%s\n", menu_copy);
return 0;
}
/**
* \brief Communication Data Class (CDC) Process
*
* This is the link between USB and the "good stuff". In this routine data
* is received and processed by CDC-ACM Class
*/
PROCESS_THREAD(cdc_process, ev, data_proc)
{
PROCESS_BEGIN();
uart_usb_init();
while(1) {
// turn off LED's if necessary
if (led3_timer) led3_timer--;
else Led3_off();
if(Is_device_enumerated() && (usb_mode == rndis_debug) && rndis_state && (!usb_busy)) {
if (justenumerated) {
//If we have serial port, set it as output
if (usb_mode == rndis_debug) {
uart_usb_set_stdout();
menu_print();
}
justenumerated = 0;
}
//Flush buffer if timeout
if(timer >= 4 && tx_counter!=0 ){
timer = 0;
uart_usb_flush();
} else {
timer++;
}
while (uart_usb_test_hit()){
menu_process(uart_usb_getchar()); // See what they want
}
}//if (Is_device_enumerated())
if (usb_mode == rndis_debug) {
etimer_set(&et, CLOCK_SECOND/80);
} else {
etimer_set(&et, CLOCK_SECOND);
}
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
} // while(1)
PROCESS_END();
}
void fsm_init(){
oled_print_pong();
g_game_melody = 1;
g_score = 0;
g_state = STATE_MENU;
// Play start-up tune
play_melody(STARTUP_SOUND);
_delay_ms(5000);
menu_init();
menu_print();
menu_print_arrow();
}
void menu_run(menu_item_t menu_items[], unsigned int items)
{
unsigned int option;
bool running = true;
menu_print(menu_items, items);
while (running) {
scanf("%u", &option);
if (option < items) {
running = menu_items[option].callback(menu_items[option].arg);
} else {
printf("Invalid option: %u\n", option);
}
printf("\n");
}
}
void menu_control(uint8_t c)
{
if(c == '0')
menu_goto(menu_left(menu_current()));
else if(c=='8')
menu_goto(menu_right(menu_current()));
else if(c=='*')
{
menu_goto(menu_up(menu_current()));
if(menu_current() == 0)
menu_goto(menu_down(menu_current()));
}
else if(c=='#')
{
if(menu_is_leaf(menu_current()))
menu_action();
else
menu_goto(menu_down(menu_current()));
}
menu_print();
}
int main(void)
{
log_init();
leds_init();
timer_init();
counter_init();
buttons_init();
ble_stack_init();
gap_params_init();
conn_params_init();
gatt_init();
advertising_data_set();
server_init();
client_init();
// Default ATT MTU size and connection interval are set at compile time.
gatt_mtu_set(m_test_params.att_mtu);
// Data Length Extension (DLE) is on by default.
// Enable the Connection Event Length Extension.
conn_evt_len_ext_set(m_test_params.conn_evt_len_ext_enabled);
NRF_LOG_INFO("ATT MTU example started.\r\n");
NRF_LOG_INFO("Press button 3 on the board connected to the PC.\r\n");
NRF_LOG_INFO("Press button 4 on other board.\r\n");
NRF_LOG_FLUSH();
board_role_select();
if (m_board_role == BOARD_TESTER)
{
m_print_menu = true;
}
if (m_board_role == BOARD_DUMMY)
{
advertising_start();
scan_start();
}
// Enter main loop.
NRF_LOG_DEBUG("Entering main loop.\r\n");
for (;;)
{
if (m_print_menu)
{
menu_print();
}
if (is_test_ready())
{
m_run_test = true;
test_run();
}
if (!NRF_LOG_PROCESS())
{
wait_for_event();
}
}
}
/**
\brief Process incomming char on debug port
*/
void menu_process(char c)
{
static enum menustate_enum /* Defines an enumeration type */
{
normal,
channel
} menustate = normal;
static char channel_string[3];
static uint8_t channel_string_i = 0;
int tempchannel;
if (menustate == channel) {
switch(c) {
case '\r':
case '\n':
channel_string[channel_string_i] = 0;
//Will return zero in event of error...
tempchannel = atoi(channel_string);
//Bounds check only if user had real input
if ( ((channel_string_i) && (tempchannel < 11)) || (tempchannel > 26)) {
PRINTF_P(PSTR("\n\rInvalid input\n\r"));
}
//If valid input, change it
if (tempchannel) {
radio_set_operating_channel(tempchannel);
eeprom_write_byte(9, tempchannel); //Write channel
eeprom_write_byte(10, ~tempchannel); //Bit inverse as check
}
menustate = normal;
break;
case '\b':
if (channel_string_i)
channel_string_i--;
break;
default:
if (channel_string_i > 1) {
menustate = normal;
PRINTF_P(PSTR("\n\rInput too long!\n\r"));
break;
}
channel_string[channel_string_i] = c;
channel_string_i++;
}
} else {
uint8_t i;
switch(c) {
case '\r':
case '\n':
break;
case 'h':
case '?':
menu_print();
break;
case 's':
PRINTF_P(PSTR("Jackdaw now in sniffer mode\n\r"));
usbstick_mode.sendToRf = 0;
usbstick_mode.translate = 0;
break;
case 'n':
PRINTF_P(PSTR("Jackdaw now in network mode\n\r"));
usbstick_mode.sendToRf = 1;
usbstick_mode.translate = 1;
break;
case '6':
if (usbstick_mode.sicslowpan) {
PRINTF_P(PSTR("Jackdaw does not perform 6lowpan translation\n\r"));
usbstick_mode.sicslowpan = 0;
} else {
PRINTF_P(PSTR("Jackdaw now performs 6lowpan translations\n\r"));
usbstick_mode.sicslowpan = 1;
}
break;
case 'r':
if (usbstick_mode.raw) {
PRINTF_P(PSTR("Jackdaw does not capture raw frames\n\r"));
usbstick_mode.raw = 0;
} else {
PRINTF_P(PSTR("Jackdaw now captures raw frames\n\r"));
usbstick_mode.raw = 1;
}
break;
case 'c':
PRINTF_P(PSTR("Select 802.15.4 Channel in range 11-26 [%d]: "), radio_get_operating_channel());
menustate = channel;
channel_string_i = 0;
break;
case 'm':
PRINTF_P(PSTR("Currently Jackdaw:\n\r * Will "));
if (usbstick_mode.sendToRf == 0) { PRINTF_P(PSTR("not "));}
PRINTF_P(PSTR("send data over RF\n\r * Will "));
if (usbstick_mode.translate == 0) { PRINTF_P(PSTR("not "));}
PRINTF_P(PSTR("change link-local addresses inside IP messages\n\r * Will "));
if (usbstick_mode.sicslowpan == 0) { PRINTF_P(PSTR("not "));}
PRINTF_P(PSTR("decompress 6lowpan headers\n\r * Will "));
if (usbstick_mode.raw == 0) { PRINTF_P(PSTR("not "));}
PRINTF_P(PSTR("Output raw 802.15.4 frames\n\r "));
PRINTF_P(PSTR(" * Operates on channel %d\n\r"), radio_get_operating_channel());
break;
case 'u':
//Mass storage mode
usb_mode = mass_storage;
//No more serial port
stdout = NULL;
//RNDIS is over
rndis_state = rndis_uninitialized;
Leds_off();
//Deatch USB
Usb_detach();
//Wait a few seconds
for(i = 0; i < 50; i++)
_delay_ms(100);
//Attach USB
Usb_attach();
break;
default:
PRINTF_P(PSTR("%c is not a valid option! h for menu\n\r"), c);
break;
}
}
return;
}
void menu_process(char c)
{
static enum menustate_enum /* Defines an enumeration type */
{
normal,
channel,
txpower
} menustate = normal;
static char channel_string[3];
static uint8_t channel_string_i;// = 0;
int tempchannel;
if (menustate == channel) {
switch(c) {
case '\r':
case '\n':
if (channel_string_i) {
channel_string[channel_string_i] = 0;
tempchannel = atoi(channel_string);
if ((tempchannel < 11) || (tempchannel > 26)) {
PRINTF_P(PSTR("\n\rInvalid input\n\r"));
} else {
rf230_set_channel(tempchannel);
#if CONTIKI_CONF_SETTINGS_MANAGER
if(settings_set_uint8(SETTINGS_KEY_CHANNEL, tempchannel) == SETTINGS_STATUS_OK) {
PRINTF_P(PSTR("\n\rChannel changed to %d and stored in EEPROM.\n\r"), tempchannel);
} else {
PRINTF_P(PSTR("\n\rChannel changed to %d, but unable to store in EEPROM!\n\r"), tempchannel);
}
#else
PRINTF_P(PSTR("\n\rChannel changed to %d.\n\r"), tempchannel);
#endif
}
} else {
PRINTF_P(PSTR("\n\rChannel unchanged.\n\r"));
}
menustate = normal;
break;
case '\b':
if (channel_string_i) {
channel_string_i--;
PRINTF_P(PSTR("\b \b"));
}
break;
case '0':
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
if (channel_string_i > 1) {
// This time the user has gone too far.
// Beep at them.
putc('\a', stdout);
break;
}
putc(c, stdout);
channel_string[channel_string_i] = c;
channel_string_i++;
break;
default:
break;
}
} else if (menustate == txpower) {
switch(c) {
case '\r':
case '\n':
if (channel_string_i) {
channel_string[channel_string_i] = 0;
tempchannel = atoi(channel_string);
if ((tempchannel < 0) || (tempchannel > 15)) {
PRINTF_P(PSTR("\n\rInvalid input\n\r"));
} else {
PRINTF_P(PSTR(" ")); //for some reason needs a print here to clear the string input...
rf230_set_txpower(tempchannel);
#if CONTIKI_CONF_SETTINGS_MANAGER
if(settings_set_uint8(SETTINGS_KEY_TXPOWER, tempchannel) == SETTINGS_STATUS_OK) {
PRINTF_P(PSTR("\n\rTransmit power changed to %d, and stored in EEPROM.\n\r"), tempchannel);
} else {
PRINTF_P(PSTR("\n\rTransmit power changed to %d, but unable to store in EEPROM!\n\r"), tempchannel);
}
#else
PRINTF_P(PSTR("\n\rTransmit power changed to %d.\n\r"), tempchannel);
#endif
}
} else {
PRINTF_P(PSTR("\n\rTransmit power unchanged.\n\r"));
}
menustate = normal;
break;
case '\b':
if (channel_string_i) {
channel_string_i--;
PRINTF_P(PSTR("\b \b"));
}
break;
case '0':
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
if (channel_string_i > 1) {
// This time the user has gone too far.
// Beep at them.
putc('\a', stdout);
break;
}
putc(c, stdout);
channel_string[channel_string_i] = c;
channel_string_i++;
break;
default:
break;
}
} else {
uint8_t i;
switch(c) {
case '\r':
case '\n':
break;
case 'h':
case '?':
menu_print();
break;
case 'd':
if (mx_console_mode.debugOn) {
PRINTF_P(PSTR("Node does not output debug strings\n\r"));
mx_console_mode.debugOn = 0;
} else {
PRINTF_P(PSTR("Node now outputs debug strings\n\r"));
mx_console_mode.debugOn = 1;
}
break;
case 'c':
PRINTF_P(PSTR("\nSelect 802.15.4 Channel in range 11-26 [%d]: "), rf230_get_channel());
menustate = channel;
channel_string_i = 0;
break;
case 'p':
PRINTF_P(PSTR("\nSelect transmit power (0=+3dBm 15=-17.2dBm) [%d]: "), rf230_get_txpower());
menustate = txpower;
channel_string_i = 0;
break;
#if UIP_CONF_IPV6_RPL
#include "rpl.h"
extern uip_ds6_nbr_t uip_ds6_nbr_cache[];
extern uip_ds6_netif_t uip_ds6_if;
case 'N':
{
uint8_t i,j;
PRINTF_P(PSTR("\n\rAddresses [%u max]\n\r"),UIP_DS6_ADDR_NB);
for (i=0;i<UIP_DS6_ADDR_NB;i++) {
if (uip_ds6_if.addr_list[i].isused) {
ipaddr_add(&uip_ds6_if.addr_list[i].ipaddr);
PRINTF_P(PSTR("\n\r"));
}
}
PRINTF_P(PSTR("\n\rNeighbors [%u max]\n\r"),UIP_DS6_NBR_NB);
for(i = 0,j=1; i < UIP_DS6_NBR_NB; i++) {
if(uip_ds6_nbr_cache[i].isused) {
ipaddr_add(&uip_ds6_nbr_cache[i].ipaddr);
PRINTF_P(PSTR("\n\r"));
j=0;
}
}
if (j) PRINTF_P(PSTR(" <none>"));
PRINTF_P(PSTR("\n\rRoutes [%u max]\n\r"),UIP_DS6_ROUTE_NB);
{
uip_ds6_route_t *r;
j = 1;
for(r = uip_ds6_route_list_head();
r != NULL;
r = list_item_next(r)) {
ipaddr_add(&r->ipaddr);
PRINTF_P(PSTR("/%u (via "), r->length);
ipaddr_add(&r->nexthop);
if(r->state.lifetime < 600) {
PRINTF_P(PSTR(") %lus\n\r"), r->state.lifetime);
} else {
PRINTF_P(PSTR(")\n\r"));
}
j = 0;
}
}
if (j) PRINTF_P(PSTR(" <none>"));
PRINTF_P(PSTR("\n\r---------\n\r"));
break;
}
case 'G':
PRINTF_P(PSTR("Global repair returns %d\n\r"),rpl_repair_root(RPL_DEFAULT_INSTANCE));
break;
case 'L':
rpl_local_repair(rpl_get_any_dag());
PRINTF_P(PSTR("Local repair initiated\n\r"));
break;
#endif
case 'm':
PRINTF_P(PSTR("Currently running on\n\r"));
PRINTF_P(PSTR(" * %s\n\r"), CONTIKI_VERSION_STRING);
PRINTF_P(PSTR(" * NETSTACK_MAC: %s, NETSTACK_RDC: %s\n\r"), NETSTACK_MAC.name, NETSTACK_RDC.name);
#if 1
{
int i;
PRINTF_P(PSTR(" * Address: "));
for (i = 0; i < 6; i += 2) {
PRINTF_P(PSTR("%02x%02x:"), uip_lladdr.addr[i], uip_lladdr.addr[i + 1]);
}
PRINTF_P(PSTR("%02x%02x\n\r"), uip_lladdr.addr[6], uip_lladdr.addr[7]);
}
#endif
#if UIP_CONF_IPV6_RPL
PRINTF_P(PSTR(" * RPL Enabled\n\r"));
#endif
#if UIP_CONF_ROUTER
PRINTF_P(PSTR(" * Routing Enabled\n\r"));
#endif
#if CONVERTTXPOWER
PRINTF_P(PSTR(" * Operates on channel %d with TX power "),rf230_get_channel());
printtxpower();
PRINTF_P(PSTR("\n\r"));
#else //just show the raw value
PRINTF_P(PSTR(" * Operates on channel %d\n\r"), rf230_get_channel());
PRINTF_P(PSTR(" * TX Power(0=+3dBm, 15=-17.2dBm): %d\n\r"), rf230_get_txpower());
#endif
if (rf230_smallest_rssi) {
PRINTF_P(PSTR(" * Current/Last/Smallest RSSI: %d/%d/%ddBm\n\r"), -91+(rf230_rssi()-1), -91+(rf230_last_rssi-1),-91+(rf230_smallest_rssi-1));
rf230_smallest_rssi=0;
} else {
PRINTF_P(PSTR(" * Current/Last/Smallest RSSI: %d/%d/--dBm\n\r"), -91+(rf230_rssi()-1), -91+(rf230_last_rssi-1));
}
#if CONFIG_STACK_MONITOR
/* See contiki-raven-main.c for initialization of the magic numbers */
{
extern uint16_t __bss_end;
uint16_t p=(uint16_t)&__bss_end;
do {
if (*(uint16_t *)p != 0x4242) {
printf_P(PSTR(" * Never-used stack > %d bytes\n\r"),p-(uint16_t)&__bss_end);
break;
}
p+=100;
} while (p<RAMEND-100);
}
#endif
break;
case 'e':
PRINTF_P(PSTR("Energy Scan:\n"));
{
uint8_t i;
uint16_t j;
uint8_t previous_channel = rf230_get_channel();
int8_t RSSI, maxRSSI[17];
uint16_t accRSSI[17];
bzero((void*)accRSSI,sizeof(accRSSI));
bzero((void*)maxRSSI,sizeof(maxRSSI));
for(j=0;j<(1<<12);j++) {
for(i=11;i<=26;i++) {
rf230_listen_channel(i);
_delay_us(3*10);
RSSI = rf230_rssi(); //multiplies rssi register by 3 for consistency with energy-detect register
maxRSSI[i-11]=Max(maxRSSI[i-11],RSSI);
accRSSI[i-11]+=RSSI;
}
if(j&(1<<7)) {
leds_on(LEDS_RED);
if(!(j&((1<<7)-1))) {
PRINTF_P(PSTR("."));
}
} else {
leds_off(LEDS_RED);
}
watchdog_periodic();
}
rf230_set_channel(previous_channel);
PRINTF_P(PSTR("\n"));
for(i=11;i<=26;i++) {
uint8_t activity=Min(maxRSSI[i-11],accRSSI[i-11]/(1<<7));
PRINTF_P(PSTR(" %d: %02ddB "),i, -91+(maxRSSI[i-11]-1));
for(;activity--;maxRSSI[i-11]--) {
PRINTF_P(PSTR("#"));
}
for(;maxRSSI[i-11]>0;maxRSSI[i-11]--) {
PRINTF_P(PSTR(":"));
}
PRINTF_P(PSTR("\n"));
}
}
PRINTF_P(PSTR("Done.\n"));
break;
case 'R':
PRINTF_P(PSTR("Resetting...\n\r"));
leds_on(LEDS_ALL);
for(i = 0; i < 20; i++) _delay_ms(100);
watchdog_reboot();
break;
default:
PRINTF_P(PSTR("%c is not a valid option! h for menu\n\r"), c);
break;
}
}
}