Пример #1
0
int main(int argc, char **argv)
{
    Aria::init();
    //ArLog::init(ArLog::StdOut, ArLog::Verbose);
    // robot
    ArRobot robot;
    /// our server
    ArServerBase server;

    // set up our parser
    ArArgumentParser parser(&argc, argv);
    // set up our simple connector
    ArSimpleConnector simpleConnector(&parser);

    // set up a gyro
    ArAnalogGyro gyro(&robot);

    // load the default arguments
    parser.loadDefaultArguments();

    // parse the command line... fail and print the help if the parsing fails
    // or if the help was requested
    if (!simpleConnector.parseArgs() || !parser.checkHelpAndWarnUnparsed())
    {
        simpleConnector.logOptions();
        exit(1);
    }

    if (!server.loadUserInfo("userServerTest.userInfo"))
    {
        printf("Could not load user info, exiting\n");
        exit(1);
    }

    server.logUsers();

    // first open the server up
    if (!server.open(7272))
    {
        printf("Could not open server port\n");
        exit(1);
    }

    // sonar, must be added to the robot
    ArSonarDevice sonarDev;
    // add the sonar to the robot
    robot.addRangeDevice(&sonarDev);

    ArIRs irs;
    robot.addRangeDevice(&irs);

    ArBumpers bumpers;
    robot.addRangeDevice(&bumpers);

    // a laser in case one is used
    ArSick sick(361, 180);
    // add the laser to the robot
    robot.addRangeDevice(&sick);




    // attach stuff to the server
    ArServerInfoRobot serverInfoRobot(&server, &robot);
    ArServerInfoSensor serverInfoSensor(&server, &robot);
    ArServerInfoDrawings drawings(&server);
    drawings.addRobotsRangeDevices(&robot);

    // ways of moving the robot
    ArServerModeStop modeStop(&server, &robot);
    ArServerModeDrive modeDrive(&server, &robot);
    ArServerModeRatioDrive modeRatioDrive(&server, &robot);
    ArServerModeWander modeWander(&server, &robot);
    modeStop.addAsDefaultMode();
    modeStop.activate();

    // set up the simple commands
    ArServerHandlerCommands commands(&server);
    // add the commands for the microcontroller
    ArServerSimpleComUC uCCommands(&commands, &robot);
    // add the commands for logging
    ArServerSimpleComMovementLogging loggingCommands(&commands, &robot);
    // add the commands for the gyro
    ArServerSimpleComGyro gyroCommands(&commands, &robot, &gyro);

    // add the commands to enable and disable safe driving to the simple commands
    modeDrive.addControlCommands(&commands);

    // Forward any video if we have some to forward.. this will forward
    // from SAV or ACTS, you can find both on our website
    // http://robots.activmedia.com, ACTS is for color tracking and is
    // charged for but SAV just does software A/V transmitting and is
    // free to all our customers... just run ACTS or SAV before you
    // start this program and this class here will forward video from it
    // to MobileEyes
    ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);

    // make a camera to use in case we have video
    ArPTZ *camera = NULL;
    ArServerHandlerCamera *handlerCamera = NULL;
    // if we have video then set up a camera
    if (videoForwarder.isForwardingVideo())
    {
        bool invertedCamera = false;
        camera = new ArVCC4(&robot,	invertedCamera,
                            ArVCC4::COMM_UNKNOWN, true, true);
        camera->init();
        handlerCamera = new ArServerHandlerCamera(&server, &robot, camera);
    }

    server.logCommandGroups();
    server.logCommandGroupsToFile("userServerTest.commandGroups");

    // now let it spin off in its own thread
    server.runAsync();

    // set up the robot for connecting
    if (!simpleConnector.connectRobot(&robot))
    {
        printf("Could not connect to robot... exiting\n");
        Aria::shutdown();
        return 1;
    }

    // set up the laser before handing it to the laser mode
    simpleConnector.setupLaser(&sick);

    robot.enableMotors();
    // start the robot running, true so that if we lose connection the run stops
    robot.runAsync(true);

    sick.runAsync();

    // connect the laser if it was requested
    if (!simpleConnector.connectLaser(&sick))
    {
        printf("Could not connect to laser... exiting\n");
        Aria::shutdown();
        return 1;
    }

    robot.waitForRunExit();
    // now exit
    Aria::shutdown();
    exit(0);
}
Пример #2
0
int main(int argc, char **argv)
{
  // mandatory init
  Aria::init();

  //ArLog::init(ArLog::StdOut, ArLog::Verbose);

  // set up our parser
  ArArgumentParser parser(&argc, argv);

  // load the default arguments 
  parser.loadDefaultArguments();

  // robot
  ArRobot robot;
  // set up our simple connector
  ArRobotConnector robotConnector(&parser, &robot);


  // add a gyro, it'll see if it should attach to the robot or not
  ArAnalogGyro gyro(&robot);


  // set up the robot for connecting
  if (!robotConnector.connectRobot())
  {
    printf("Could not connect to robot... exiting\n");
    Aria::exit(1);
  }

  ArDataLogger dataLogger(&robot, "dataLog.txt");
  dataLogger.addToConfig(Aria::getConfig());
  
  // our base server object
  ArServerBase server;

  ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
  ArServerSimpleOpener simpleOpener(&parser);


  ArClientSwitchManager clientSwitchManager(&server, &parser);

  // parse the command line... fail and print the help if the parsing fails
  // or if the help was requested
  if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
  {    
    Aria::logOptions();
    Aria::exit(1);
  }

  // Set up where we'll look for files such as user/password 
  char fileDir[1024];
  ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(), 
			 "ArNetworking/examples");

  // first open the server up
  if (!simpleOpener.open(&server, fileDir, 240))
  {
    if (simpleOpener.wasUserFileBad())
      printf("Bad user/password/permissions file\n");
    else
      printf("Could not open server port\n");
    exit(1);
  }

  // Range devices:
 
 
  ArSonarDevice sonarDev;
  robot.addRangeDevice(&sonarDev);

  ArIRs irs;
  robot.addRangeDevice(&irs);

  ArBumpers bumpers;
  robot.addRangeDevice(&bumpers);

  // attach services to the server
  ArServerInfoRobot serverInfoRobot(&server, &robot);
  ArServerInfoSensor serverInfoSensor(&server, &robot);
  ArServerInfoDrawings drawings(&server);

  // modes for controlling robot movement
  ArServerModeStop modeStop(&server, &robot);
  ArServerModeRatioDrive modeRatioDrive(&server, &robot);  
  ArServerModeWander modeWander(&server, &robot);
  modeStop.addAsDefaultMode();
  modeStop.activate();

  // set up the simple commands
  ArServerHandlerCommands commands(&server);
  ArServerSimpleComUC uCCommands(&commands, &robot);  // send commands directly to microcontroller
  ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // control debug logging
  ArServerSimpleComGyro gyroCommands(&commands, &robot, &gyro); // configure gyro
  ArServerSimpleComLogRobotConfig configCommands(&commands, &robot); // control more debug logging
  ArServerSimpleServerCommands serverCommands(&commands, &server); // control ArNetworking debug logging
  ArServerSimpleLogRobotDebugPackets logRobotDebugPackets(&commands, &robot, ".");  // debugging tool

  // ArServerModeDrive is an older drive mode. ArServerModeRatioDrive is newer and generally performs better,
  // but you can use this for old clients if neccesary.
  //ArServerModeDrive modeDrive(&server, &robot);
  //modeDrive.addControlCommands(&commands); // configure the drive modes (e.g. enable/disable safe drive)

  ArServerHandlerConfig serverHandlerConfig(&server, Aria::getConfig()); // make a config handler
  ArLog::addToConfig(Aria::getConfig()); // let people configure logging

  modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings"); // able to configure teleop settings
  modeRatioDrive.addControlCommands(&commands);

  // Forward video if either ACTS or SAV server are running.
  // You can find out more about SAV and ACTS on our website
  // http://robots.activmedia.com. ACTS is for color tracking and is
  // a separate product. SAV just does software A/V transmitting and is
  // free to all our customers. Just run ACTS or SAV server before you
  // start this program and this class here will forward video from the
  // server to the client.
  ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);
  
  // Control a pan/tilt/zoom camera, if one is installed, and the video
  // forwarder was enabled above.
  ArPTZ *camera = NULL;
  ArServerHandlerCamera *handlerCamera = NULL;
  ArCameraCollection *cameraCollection = NULL;
  if (videoForwarder.isForwardingVideo())
  {
    bool invertedCamera = false;
    camera = new ArVCC4(&robot,	invertedCamera, 
			ArVCC4::COMM_UNKNOWN, true, true);
    camera->init();

    cameraCollection = new ArCameraCollection();
    cameraCollection->addCamera("Cam1", "VCC4", "Camera", "VCC4");
    handlerCamera = new ArServerHandlerCamera("Cam1", 
		                              &server, 
					      &robot,
					      camera, 
					      cameraCollection);
  }

  // You can use this class to send a set of arbitrary strings 
  // for MobileEyes to display, this is just a small example
  ArServerInfoStrings stringInfo(&server);
  Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
  Aria::getInfoGroup()->addStringInt(
	  "Motor Packet Count", 10, 
	  new ArConstRetFunctorC<int, ArRobot>(&robot, 
					       &ArRobot::getMotorPacCount));
  /*
  Aria::getInfoGroup()->addStringInt(
	  "Laser Packet Count", 10, 
	  new ArRetFunctorC<int, ArSick>(&sick, 
					 &ArSick::getSickPacCount));
  */
  
  // start the robot running, true means that if we lose connection the run thread stops
  robot.runAsync(true);


  // connect the laser(s) if it was requested
  if (!laserConnector.connectLasers())
  {
    printf("Could not connect to lasers... exiting\n");
    Aria::exit(2);
  }
  

  drawings.addRobotsRangeDevices(&robot);

  // log whatever we wanted to before the runAsync
  simpleOpener.checkAndLog();
  // now let it spin off in its own thread
  server.runAsync();

  printf("Server is now running...\n");

  // Add a key handler so that you can exit by pressing
  // escape. Note that a key handler prevents you from running
  // a program in the background on Linux, since it expects an 
  // active terminal to read keys from; remove this if you want
  // to run it in the background.
  ArKeyHandler *keyHandler;
  if ((keyHandler = Aria::getKeyHandler()) == NULL)
  {
    keyHandler = new ArKeyHandler;
    Aria::setKeyHandler(keyHandler);
    robot.lock();
    robot.attachKeyHandler(keyHandler);
    robot.unlock();
    printf("To exit, press escape.\n");
  }

  // Read in parameter files.
  std::string configFile = "serverDemoConfig.txt";
  Aria::getConfig()->setBaseDirectory("./");
  if (Aria::getConfig()->parseFile(configFile.c_str(), true, true))
  {
    ArLog::log(ArLog::Normal, "Loaded config file %s", configFile.c_str());
  }
  else
  {
    if (ArUtil::findFile(configFile.c_str()))
    {
      ArLog::log(ArLog::Normal, 
		 "Trouble loading configuration file %s, continuing",
		 configFile.c_str());
    }
    else
    {
      ArLog::log(ArLog::Normal, 
		 "No configuration file %s, will try to create if config used",
		 configFile.c_str());
    }
  }

  clientSwitchManager.runAsync();

  robot.lock();
  robot.enableMotors();
  robot.unlock();

  robot.waitForRunExit();
  Aria::exit(0);
}
int main(int argc, char **argv)
{
  Aria::init();
  ArRobot robot;
  ArServerBase server;

  ArArgumentParser parser(&argc, argv);
  ArSimpleConnector simpleConnector(&parser);
  ArServerSimpleOpener simpleOpener(&parser);


  // parse the command line... fail and print the help if the parsing fails
  // or if help was requested
  parser.loadDefaultArguments();
  if (!simpleConnector.parseArgs() || !simpleOpener.parseArgs() || 
      !parser.checkHelpAndWarnUnparsed())
  {    
    simpleConnector.logOptions();
    simpleOpener.logOptions();
    exit(1);
  }

  // Set up where we'll look for files such as config file, user/password file,
  // etc.
  char fileDir[1024];
  ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(), 
			 "ArNetworking/examples");

  // first open the server up
  if (!simpleOpener.open(&server, fileDir, 240))
  {
    if (simpleOpener.wasUserFileBad())
      printf("Error: Bad user/password/permissions file.\n");
    else
      printf("Error: Could not open server port. Use -help to see options.\n");
    exit(1);
  }


  // Devices
  ArAnalogGyro gyro(&robot);

  ArSonarDevice sonarDev;
  robot.addRangeDevice(&sonarDev);

  ArIRs irs;
  robot.addRangeDevice(&irs);

  ArBumpers bumpers;
  robot.addRangeDevice(&bumpers);

  ArSick sick(361, 180);
  robot.addRangeDevice(&sick);  
  

  ArServerInfoRobot serverInfoRobot(&server, &robot);
  ArServerInfoSensor serverInfoSensor(&server, &robot);

  // This is the service that provides drawing data to the client.
  ArServerInfoDrawings drawings(&server);

  // Convenience function that sets up drawings for all the robot's current
  // range devices (using default shape and color info)
  drawings.addRobotsRangeDevices(&robot);

  // Add our custom drawings
  drawings.addDrawing(
      //                shape:      color:               size:   layer:
      new ArDrawingData("polyLine", ArColor(255, 0, 0),  2,      49),
      "exampleDrawing_Home", 
      new ArGlobalFunctor2<ArServerClient*, ArNetPacket*>(&exampleHomeDrawingNetCallback)
  );
  drawings.addDrawing(                                    
      new ArDrawingData("polyDots", ArColor(0, 255, 0), 250, 48),
      "exampleDrawing_Dots", 
      new ArGlobalFunctor2<ArServerClient*, ArNetPacket*>(&exampleDotsDrawingNetCallback)
  );
  drawings.addDrawing(
      new ArDrawingData("polySegments", ArColor(0, 0, 0), 4, 52),
      "exampleDrawing_XMarksTheSpot", 
      new ArGlobalFunctor2<ArServerClient*, ArNetPacket*>(&exampleXDrawingNetCallback)
  );
  drawings.addDrawing(
      new ArDrawingData("polyArrows", ArColor(255, 0, 255), 500, 100),
      "exampleDrawing_Arrows", 
      new ArGlobalFunctor2<ArServerClient*, ArNetPacket*>(&exampleArrowsDrawingNetCallback)
  );

  // modes for moving the robot
  ArServerModeStop modeStop(&server, &robot);
  ArServerModeDrive modeDrive(&server, &robot);
  ArServerModeRatioDrive modeRatioDrive(&server, &robot);
  ArServerModeWander modeWander(&server, &robot);
  modeStop.addAsDefaultMode();
  modeStop.activate();

  

  // Connect to the robot.
  if (!simpleConnector.connectRobot(&robot))
  {
    printf("Error: Could not connect to robot... exiting\n");
    Aria::shutdown();
    return 1;
  }

  // set up the laser before handing it to the laser mode
  simpleConnector.setupLaser(&sick);

  robot.enableMotors();

  // start the robot cycle running in a background thread
  robot.runAsync(true);

  // start the laser processing cycle in a background thread
  sick.runAsync();

  // connect the laser if it was requested
  if (!simpleConnector.connectLaser(&sick))
  {
    printf("Error: Could not connect to laser... exiting\n");
    Aria::shutdown();
    return 1;
  }

  // log whatever we wanted to before the runAsync
  simpleOpener.checkAndLog();

  // run the server thread in the background
  server.runAsync();

  printf("Server is now running...\n");


  // Add a key handler mostly that windows can exit by pressing
  // escape, note that the key handler prevents you from running this program
  // in the background on Linux.
  ArKeyHandler *keyHandler;
  if ((keyHandler = Aria::getKeyHandler()) == NULL)
  {
    keyHandler = new ArKeyHandler;
    Aria::setKeyHandler(keyHandler);
    robot.lock();
    robot.attachKeyHandler(keyHandler);
    robot.unlock();
    printf("To exit, press escape.\n");
  }

  robot.waitForRunExit();
 

  Aria::shutdown();
  exit(0);  
}
int main(int argc, char **argv)
{
  // Initialize Aria and Arnl global information
  Aria::init();
  Arnl::init();


  // The robot object
  ArRobot robot;

  // Parse the command line arguments.
  ArArgumentParser parser(&argc, argv);

  // Set up our simpleConnector, to connect to the robot and laser
  //ArSimpleConnector simpleConnector(&parser);
  ArRobotConnector robotConnector(&parser, &robot);

  // Connect to the robot
  if (!robotConnector.connectRobot())
  {
    ArLog::log(ArLog::Normal, "Error: Could not connect to robot... exiting");
    Aria::exit(3);
  }



  // Set up where we'll look for files. Arnl::init() set Aria's default
  // directory to Arnl's default directory; addDirectories() appends this
  // "examples" directory.
  char fileDir[1024];
  ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(), 
			 "examples");
  
  
  // To direct log messages to a file, or to change the log level, use these  calls:
  //ArLog::init(ArLog::File, ArLog::Normal, "log.txt", true, true);
  //ArLog::init(ArLog::File, ArLog::Verbose);
 
  // Add a section to the configuration to change ArLog parameters
  ArLog::addToConfig(Aria::getConfig());

  // set up a gyro (if the robot is older and its firmware does not
  // automatically incorporate gyro corrections, then this object will do it)
  ArAnalogGyro gyro(&robot);

  // Our networking server
  ArServerBase server;
  

  // Set up our simpleOpener, used to set up the networking server
  ArServerSimpleOpener simpleOpener(&parser);

  // the laser connector
  ArLaserConnector laserConnector(&parser, &robot, &robotConnector);

  // Tell the laser connector to always connect the first laser since
  // this program always requires a laser.
  parser.addDefaultArgument("-connectLaser");
  
  // Load default arguments for this computer (from /etc/Aria.args, environment
  // variables, and other places)
  parser.loadDefaultArguments();

  // Parse arguments 
  if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
  {
    logOptions(argv[0]);
    Aria::exit(1);
  }
  

  // This causes Aria::exit(9) to be called if the robot unexpectedly
  // disconnects
  ArGlobalFunctor1<int> shutdownFunctor(&Aria::exit, 9);
  robot.addDisconnectOnErrorCB(&shutdownFunctor);


  // Create an ArSonarDevice object (ArRangeDevice subclass) and 
  // connect it to the robot.
  ArSonarDevice sonarDev;
  robot.addRangeDevice(&sonarDev);



  // This object will allow robot's movement parameters to be changed through
  // a Robot Configuration section in the ArConfig global configuration facility.
  ArRobotConfig robotConfig(&robot);

  // Include gyro configuration options in the robot configuration section.
  robotConfig.addAnalogGyro(&gyro);

  // Start the robot thread.
  robot.runAsync(true);
  

  // connect the laser(s) if it was requested, this adds them to the
  // robot too, and starts them running in their own threads
  if (!laserConnector.connectLasers())
  {
    ArLog::log(ArLog::Normal, "Could not connect to all lasers... exiting\n");
    Aria::exit(2);
  }

  // find the laser we should use for localization and/or mapping,
  // which will be the first laser
  robot.lock();
  ArLaser *firstLaser = robot.findLaser(1);
  if (firstLaser == NULL || !firstLaser->isConnected())
  {
    ArLog::log(ArLog::Normal, "Did not have laser 1 or it is not connected, cannot start localization and/or mapping... exiting");
    Aria::exit(2);
  }
  robot.unlock();


    /* Create and set up map object */
  
  // Set up the map object, this will look for files in the examples
  // directory (unless the file name starts with a /, \, or .
  // You can take out the 'fileDir' argument to look in the program's current directory
  // instead.
  // When a configuration file is loaded into ArConfig later, if it specifies a
  // map file, then that file will be loaded as the map.
  ArMap map(fileDir);
  // set it up to ignore empty file names (otherwise if a configuration omits
  // the map file, the whole configuration change will fail)
  map.setIgnoreEmptyFileName(true);
  // ignore the case, so that if someone is using MobileEyes or
  // MobilePlanner from Windows and changes the case on a map name,
  // it will still work.
  map.setIgnoreCase(true);

    
    /* Create localization and path planning threads */


  ArPathPlanningTask pathTask(&robot, &sonarDev, &map);



  ArLog::log(ArLog::Normal, "Creating laser localization task");
  // Laser Monte-Carlo Localization
  ArLocalizationTask locTask(&robot, firstLaser, &map);



  // Set some options on each laser that the laser connector 
  // connected to.
  std::map<int, ArLaser *>::iterator laserIt;
  for (laserIt = robot.getLaserMap()->begin();
       laserIt != robot.getLaserMap()->end();
       laserIt++)
  {
    int laserNum = (*laserIt).first;
    ArLaser *laser = (*laserIt).second;

    // Skip lasers that aren't connected
    if(!laser->isConnected())
      continue;

    // add the disconnectOnError CB to shut things down if the laser
    // connection is lost
    laser->addDisconnectOnErrorCB(&shutdownFunctor);
    // set the number of cumulative readings the laser will take
    laser->setCumulativeBufferSize(200);
    // add the lasers to the path planning task
    pathTask.addRangeDevice(laser, ArPathPlanningTask::BOTH);
    // set the cumulative clean offset (so that they don't all fire at once)
    laser->setCumulativeCleanOffset(laserNum * 100);
    // reset the cumulative clean time (to make the new offset take effect)
    laser->resetLastCumulativeCleanTime();

    // Add the packet count to the Aria info strings (It will be included in
    // MobileEyes custom details so you can monitor whether the laser data is
    // being received correctly)
    std::string laserPacketCountName;
    laserPacketCountName = laser->getName();
    laserPacketCountName += " Packet Count";
    Aria::getInfoGroup()->addStringInt(
	    laserPacketCountName.c_str(), 10, 
	    new ArRetFunctorC<int, ArLaser>(laser, 
					 &ArLaser::getReadingCount));
  }


  // Used for optional multirobot features (see below) (TODO move to multirobot
  // example?)
  ArClientSwitchManager clientSwitch(&server, &parser);




    /* Start the server */

  // Open the networking server
  if (!simpleOpener.open(&server, fileDir, 240))
  {
    ArLog::log(ArLog::Normal, "Error: Could not open server.");
    exit(2);
  }



    /* Create various services that provide network access to clients (such as
     * MobileEyes), as well as add various additional features to ARNL */


  // ARNL can optionally get information about the positions of other robots from a
  // "central server" (see central server example program), if command
  // line options specifying the address of the central server was given.
  // If there is no central server, then the address of each other robot
  // can instead be given in the configuration, and the multirobot systems
  // will connect to each robot (or "peer") individually.

        // TODO move this to multirobot example?


  bool usingCentralServer = false;
  if(clientSwitch.getCentralServerHostName() != NULL)
    usingCentralServer = true;

  // if we're using the central server then we want to create the
  // multiRobot central classes
  if (usingCentralServer)
  {
    // Make the handler for multi robot information (this sends the
    // information to the central server)
    //ArServerHandlerMultiRobot *handlerMultiRobot = 
    new ArServerHandlerMultiRobot(&server, &robot, 
						      &pathTask,
						      &locTask, &map);
    
    // Normally each robot, and the central server, must all have
    // the same map name for the central server to share robot
    // information.  (i.e. they are operating in the same space).
    // This changes the map name that ArServerHandlerMutliRobot 
    // reports to the central server, in case you want this individual
    // robot to load a different map file name, but still report 
    // the common map file to the central server.
    //handlerMultiRobot->overrideMapName("central.map");

    // the range device that gets the multi robot information from
    // the central server and presents it as virtual range readings
    // to ARNL
    ArMultiRobotRangeDevice *multiRobotRangeDevice = new ArMultiRobotRangeDevice(&server);
    
    robot.addRangeDevice(multiRobotRangeDevice);
    pathTask.addRangeDevice(multiRobotRangeDevice, 
			    ArPathPlanningTask::BOTH);
    
    // Set up options for drawing multirobot information in MobileEyes.
    multiRobotRangeDevice->setCurrentDrawingData(
	    new ArDrawingData("polyDots", ArColor(125, 125, 0),
			      100, 73, 1000), true);
    multiRobotRangeDevice->setCumulativeDrawingData(
	    new ArDrawingData("polyDots", ArColor(125, 0, 125),
			      100, 72, 1000), true);

    // This sets up the localization to use the known poses of other robots
    // for its localization in cases where numerous robots crowd out the map.
    locTask.setMultiRobotCallback(multiRobotRangeDevice->getOtherRobotsCB());
  }
  // if we're not using a central server then create the multirobot peer classes
  else
  {
    // set the path planning so it uses the explicit collision range for how far its planning
    pathTask.setUseCollisionRangeForPlanningFlag(true);
    // make our thing that gathers information from the other servers
    ArServerHandlerMultiRobotPeer *multiRobotPeer = NULL;
    ArMultiRobotPeerRangeDevice *multiRobotPeerRangeDevice = NULL;
    multiRobotPeerRangeDevice = new ArMultiRobotPeerRangeDevice(&map);
    // make our thing that sends information to the other servers
    multiRobotPeer = new ArServerHandlerMultiRobotPeer(&server, &robot, 
						     &pathTask, &locTask);
    // hook the two together so they both know what priority this robot is
    multiRobotPeer->setNewPrecedenceCallback(
	    multiRobotPeerRangeDevice->getSetPrecedenceCallback());
    // hook the two together so they both know what priority this
    // robot's fingerprint is
    multiRobotPeer->setNewFingerprintCallback(
	    multiRobotPeerRangeDevice->getSetFingerprintCallback());
    // hook the two together so that the range device can call on the
    // server handler to change its fingerprint
    multiRobotPeerRangeDevice->setChangeFingerprintCB(
	    multiRobotPeer->getChangeFingerprintCB());
    // then add the robot to the places it needs to be
    robot.addRangeDevice(multiRobotPeerRangeDevice);
    pathTask.addRangeDevice(multiRobotPeerRangeDevice, 
			    ArPathPlanningTask::BOTH);

    // Set the range device so that we can see the information its using
    // to avoid, you can comment these out in order to not see them
    multiRobotPeerRangeDevice->setCurrentDrawingData(
	    new ArDrawingData("polyDots", ArColor(125, 125, 0),
			      100, 72, 1000), true);
    multiRobotPeerRangeDevice->setCumulativeDrawingData(
	    new ArDrawingData("polyDots", ArColor(125, 0, 125),
			      100, 72, 1000), true);
    // This sets up the localization to use the known poses of other robots
    // for its localization in cases where numerous robots crowd out the map.
    locTask.setMultiRobotCallback(
	    multiRobotPeerRangeDevice->getOtherRobotsCB());
  }




  /* Add additional range devices to the robot and path planning task (so it
     avoids obstacles detected by these devices) */
  
  // Add IR range device to robot and path planning task (so it avoids obstacles
  // detected by this device)
  robot.lock();
  ArIRs irs;
  robot.addRangeDevice(&irs);
  pathTask.addRangeDevice(&irs, ArPathPlanningTask::CURRENT);

  // Add bumpers range device to robot and path planning task (so it avoids obstacles
  // detected by this device)
  ArBumpers bumpers;
  robot.addRangeDevice(&bumpers);
  pathTask.addRangeDevice(&bumpers, ArPathPlanningTask::CURRENT);

  // Add range device which uses forbidden regions given in the map to give virtual
  // range device readings to ARNL.  (so it avoids obstacles
  // detected by this device)
  ArForbiddenRangeDevice forbidden(&map);
  robot.addRangeDevice(&forbidden);
  pathTask.addRangeDevice(&forbidden, ArPathPlanningTask::CURRENT);

  robot.unlock();


  // Action to slow down robot when localization score drops but not lost.
  ArActionSlowDownWhenNotCertain actionSlowDown(&locTask);
  pathTask.getPathPlanActionGroup()->addAction(&actionSlowDown, 140);

  // Action to stop the robot when localization is "lost" (score too low)
  ArActionLost actionLostPath(&locTask, &pathTask);
  pathTask.getPathPlanActionGroup()->addAction(&actionLostPath, 150);

  // Arnl uses this object when it must replan its path because its
  // path is completely blocked.  It will use an older history of sensor
  // readings to replan this new path.  This should not be used with SONARNL
  // since sonar readings are not accurate enough and may prevent the robot
  // from planning through space that is actually clear.
  ArGlobalReplanningRangeDevice replanDev(&pathTask);

  
  // Service to provide drawings of data in the map display :
  ArServerInfoDrawings drawings(&server);
  drawings.addRobotsRangeDevices(&robot);
  drawings.addRangeDevice(&replanDev);

  /* Draw a box around the local path planning area use this 
    (You can enable this particular drawing from custom commands 
    which is set up down below in ArServerInfoPath) */
  ArDrawingData drawingDataP("polyLine", ArColor(200,200,200), 1, 75);
  ArFunctor2C<ArPathPlanningTask, ArServerClient *, ArNetPacket *> 
    drawingFunctorP(&pathTask, &ArPathPlanningTask::drawSearchRectangle);
  drawings.addDrawing(&drawingDataP, "Local Plan Area", &drawingFunctorP); 

  /* Show the sample points used by MCL */
  ArDrawingData drawingDataL("polyDots", ArColor(0,255,0), 100, 75);
  ArFunctor2C<ArLocalizationTask, ArServerClient *, ArNetPacket *> 
    drawingFunctorL(&locTask, &ArLocalizationTask::drawRangePoints);
  drawings.addDrawing(&drawingDataL, "Localization Points", &drawingFunctorL);


  // "Custom" commands. You can add your own custom commands here, they will
  // be available in MobileEyes' custom commands (enable in the toolbar or
  // access through Robot Tools)
  ArServerHandlerCommands commands(&server);


  // These provide various kinds of information to the client:
  ArServerInfoRobot serverInfoRobot(&server, &robot);
  ArServerInfoSensor serverInfoSensor(&server, &robot);
  ArServerInfoPath serverInfoPath(&server, &robot, &pathTask);
  serverInfoPath.addSearchRectangleDrawing(&drawings);
  serverInfoPath.addControlCommands(&commands);

  // Provides localization info and allows the client (MobileEyes) to relocalize at a given
  // pose:
  ArServerInfoLocalization serverInfoLocalization(&server, &robot, &locTask);
  ArServerHandlerLocalization serverLocHandler(&server, &robot, &locTask);

  // If you're using MobileSim, ArServerHandlerLocalization sends it a command
  // to move the robot's true pose if you manually do a localization through 
  // MobileEyes.  To disable that behavior, use this constructor call instead:
  // ArServerHandlerLocalization serverLocHandler(&server, &robot, true, false);
  // The fifth argument determines whether to send the command to MobileSim.

  // Provide the map to the client (and related controls):
  ArServerHandlerMap serverMap(&server, &map);

  // These objects add some simple (custom) commands to 'commands' for testing and debugging:
  ArServerSimpleComUC uCCommands(&commands, &robot);                   // Send any command to the microcontroller
  ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // configure logging
  ArServerSimpleComLogRobotConfig configCommands(&commands, &robot);   // trigger logging of the robot config parameters
//  ArServerSimpleServerCommands serverCommands(&commands, &server);     // monitor networking behavior (track packets sent etc.)


  // service that allows the client to monitor the communication link status
  // between the robot and the client.
  //
  ArServerHandlerCommMonitor handlerCommMonitor(&server);



  // service that allows client to change configuration parameters in ArConfig 
  ArServerHandlerConfig handlerConfig(&server, Aria::getConfig(),
				      Arnl::getTypicalDefaultParamFileName(),
				      Aria::getDirectory());



  /* Set up the possible modes for remote control from a client such as
   * MobileEyes:
   */

  // Mode To go to a goal or other specific point:
  ArServerModeGoto modeGoto(&server, &robot, &pathTask, &map,
			    locTask.getRobotHome(),
			    locTask.getRobotHomeCallback());


  // Mode To stop and remain stopped:
  ArServerModeStop modeStop(&server, &robot);

  // Cause the sonar to turn off automatically
  // when the robot is stopped, and turn it back on when commands to move
  // are sent. (Note, if using SONARNL to localize, then don't do this
  // since localization may get lost)
  ArSonarAutoDisabler sonarAutoDisabler(&robot);

  // Teleoperation modes To drive by keyboard, joystick, etc:
  ArServerModeRatioDrive modeRatioDrive(&server, &robot);  
//  ArServerModeDrive modeDrive(&server, &robot);            // Older mode for compatability



  // Prevent normal teleoperation driving if localization is lost using
  // a high-priority action, which enables itself when the particular mode is
  // active.
  // (You have to enter unsafe drive mode to drive when lost.)
  ArActionLost actionLostRatioDrive(&locTask, &pathTask, &modeRatioDrive);
  modeRatioDrive.getActionGroup()->addAction(&actionLostRatioDrive, 110);

  // Add drive mode section to the configuration, and also some custom (simple) commands:
  modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings");
  modeRatioDrive.addControlCommands(&commands);

  // Wander mode (also prevent wandering if lost):
  ArServerModeWander modeWander(&server, &robot);
  ArActionLost actionLostWander(&locTask, &pathTask, &modeWander);
  modeWander.getActionGroup()->addAction(&actionLostWander, 110);


  // This provides a small table of interesting information for the client
  // to display to the operator. You can add your own callbacks to show any
  // data you want.
  ArServerInfoStrings stringInfo(&server);
  Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
  
  // Provide a set of informational data (turn on in MobileEyes with
  // View->Custom Details)

  Aria::getInfoGroup()->addStringInt(
	  "Motor Packet Count", 10, 
	  new ArConstRetFunctorC<int, ArRobot>(&robot, 
					       &ArRobot::getMotorPacCount));

  Aria::getInfoGroup()->addStringDouble(
	  "Laser Localization Score", 8, 
	  new ArRetFunctorC<double, ArLocalizationTask>(
		  &locTask, &ArLocalizationTask::getLocalizationScore),
	  "%.03f");
  Aria::getInfoGroup()->addStringInt(
	  "Laser Loc Num Samples", 8, 
	  new ArRetFunctorC<int, ArLocalizationTask>(
		  &locTask, &ArLocalizationTask::getCurrentNumSamples),
	  "%4d");


  // Display gyro status if gyro is enabled and is being handled by the firmware (gyro types 2, 3, or 4).
  // (If the firmware detects an error communicating with the gyro or IMU it
  // returns a flag, and stops using it.)
  // (This gyro type parameter, and fault flag, are only in ARCOS, not Seekur firmware)
  if(robot.getOrigRobotConfig() && robot.getOrigRobotConfig()->getGyroType() > 1)
  {
    Aria::getInfoGroup()->addStringString(
          "Gyro/IMU Status", 10,
          new ArGlobalRetFunctor1<const char*, ArRobot*>(&getGyroStatusString, &robot)
      );
  }


  // Setup the dock if there is a docking system on board.
  ArServerModeDock *modeDock = NULL;
  modeDock = ArServerModeDock::createDock(&server, &robot, &locTask, 
					  &pathTask);
  if (modeDock != NULL)
  {
    modeDock->checkDock();
    modeDock->addAsDefaultMode();
    modeDock->addToConfig(Aria::getConfig());
    modeDock->addControlCommands(&commands);
  }



  // Make Stop mode the default (If current mode deactivates without entering
  // a new mode, then Stop Mode will be selected)
  modeStop.addAsDefaultMode();
    // TODO move up near where stop mode is created?





  /* Services that allow the client to initiate scanning with the laser to
     create maps in Mapper3 (So not possible with SONARNL): */

  ArServerHandlerMapping handlerMapping(&server, &robot, firstLaser, 
					fileDir, "", true);

  // make laser localization stop while mapping
  handlerMapping.addMappingStartCallback(
	  new ArFunctor1C<ArLocalizationTask, bool>
	  (&locTask, &ArLocalizationTask::setIdleFlag, true));

  // and then make it start again when we're doine
  handlerMapping.addMappingEndCallback(
	  new ArFunctor1C<ArLocalizationTask, bool>
	  (&locTask, &ArLocalizationTask::setIdleFlag, false));


  // Make it so our "lost" actions don't stop us while mapping
  handlerMapping.addMappingStartCallback(actionLostPath.getDisableCB());
  handlerMapping.addMappingStartCallback(actionLostRatioDrive.getDisableCB());
  handlerMapping.addMappingStartCallback(actionLostWander.getDisableCB());

  // And then let them make us stop as usual when done mapping
  handlerMapping.addMappingEndCallback(actionLostPath.getEnableCB());
  handlerMapping.addMappingEndCallback(actionLostRatioDrive.getEnableCB());
  handlerMapping.addMappingEndCallback(actionLostWander.getEnableCB());

  // don't let forbidden lines show up as obstacles while mapping
  // (they'll just interfere with driving while mapping, and localization is off anyway)
  handlerMapping.addMappingStartCallback(forbidden.getDisableCB());

  // let forbidden lines show up as obstacles again as usual after mapping
  handlerMapping.addMappingEndCallback(forbidden.getEnableCB());


  /*
  // If we are on a simulator, move the robot back to its starting position,
  // and reset its odometry.
  // This will allow localizeRobotAtHomeBlocking() below will (probably) work (it
  // tries current odometry (which will be 0,0,0) and all the map
  // home points.
  // (Ignored by a real robot)
  //robot.com(ArCommands::SIM_RESET);
  */


  // create a pose storage class, this will let the program keep track
  // of where the robot is between runs...  after we try and restore
  // from this file it will start saving the robot's pose into the
  // file
  ArPoseStorage poseStorage(&robot);
  /// if we could restore the pose from then set the sim there (this
  /// won't do anything to the real robot)... if we couldn't restore
  /// the pose then just reset the position of the robot (which again
  /// won't do anything to the real robot)
  if (poseStorage.restorePose("robotPose"))
    serverLocHandler.setSimPose(robot.getPose());
  else
    robot.com(ArCommands::SIM_RESET);



  /* File transfer services: */
  
#ifdef WIN32
  // Not implemented for Windows yet.
  ArLog::log(ArLog::Normal, "Note, file upload/download services are not implemented for Windows; not enabling them.");
#else
  // This block will allow you to set up where you get and put files
  // to/from, just comment them out if you don't want this to happen
  // /*
  ArServerFileLister fileLister(&server, fileDir);
  ArServerFileToClient fileToClient(&server, fileDir);
  ArServerFileFromClient fileFromClient(&server, fileDir, "/tmp");
  ArServerDeleteFileOnServer deleteFileOnServer(&server, fileDir);
  // */
#endif

    /* Video image streaming, and camera controls (Requires SAVserver or ACTS) */

  // Forward any video if either ACTS or SAV server are running.
  // You can find out more about SAV and ACTS on our website
  // http://robots.activmedia.com. ACTS is for color tracking and is
  // a seperate product. SAV just does software A/V transmitting and is
  // free to all our customers. Just run ACTS or SAV server before you
  // start this program and this class here will forward video from the
  // server to the client.
  ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);
  
  // make a camera to use in case we have video. the camera collection collects
  // multiple ptz cameras 
  ArPTZ *camera = NULL;
  ArServerHandlerCamera *handlerCamera = NULL;
  ArCameraCollection *cameraCollection = NULL;

  // if we have video then set up a camera 
  if (videoForwarder.isForwardingVideo())
  {

    cameraCollection = new ArCameraCollection();
    cameraCollection->addCamera("Cam1", "PTZ", "Camera", "PTZ");

    videoForwarder.setCameraName("Cam1");
    videoForwarder.addToCameraCollection(*cameraCollection);

    camera = new ArVCC4(&robot); //,	invertedCamera, ArVCC4::COMM_UNKNOWN, true, true);
    // To use an RVision SEE camera instead:
    // camera = new ArRVisionPTZ(&robot);
    camera->init();

    handlerCamera = new ArServerHandlerCamera("Cam1", 
		                                           &server, 
					                                     &robot,
					                                     camera, 
					                                     cameraCollection);

    pathTask.addGoalFinishedCB(
	    new ArFunctorC<ArServerHandlerCamera>(
		    handlerCamera, 
		    &ArServerHandlerCamera::cameraModeLookAtGoalClearGoal));
  }

  // After all of the cameras / videos have been created and added to the collection,
  // then start the collection server.
  //
  if (cameraCollection != NULL) {
    new ArServerHandlerCameraCollection(&server, cameraCollection);
  }




    /* Load configuration values, map, and begin! */

  
  // When parsing the configuration file, also look at the program's command line options 
  // from the command-line argument parser as well as the configuration file.
  // (So you can use any argument on the command line, namely -map.) 
  Aria::getConfig()->useArgumentParser(&parser);
  puts("xxx");puts("aaa"); fflush(stdout);
  // Read in parameter files.
  ArLog::log(ArLog::Normal, "Loading config file %s into ArConfig (base directory %s)...", Arnl::getTypicalParamFileName(), Aria::getConfig()->getBaseDirectory());
  if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
  {
    ArLog::log(ArLog::Normal, "Trouble loading configuration file, exiting");
    Aria::exit(5);
  }

  // Warn about unknown params.
  if (!simpleOpener.checkAndLog() || !parser.checkHelpAndWarnUnparsed())
  {
    logOptions(argv[0]);
    Aria::exit(6);
  }

  // Warn if there is no map
  if (map.getFileName() == NULL || strlen(map.getFileName()) <= 0)
  {
    ArLog::log(ArLog::Normal, "");
    ArLog::log(ArLog::Normal, "### No map file is set up, you can make a map with the following procedure");
    ArLog::log(ArLog::Normal, "   0) You can find this information in README.txt or docs/Mapping.txt");
    ArLog::log(ArLog::Normal, "   1) Connect to this server with MobileEyes");
    ArLog::log(ArLog::Normal, "   2) Go to Tools->Map Creation->Start Scan");
    ArLog::log(ArLog::Normal, "   3) Give the map a name and hit okay");
    ArLog::log(ArLog::Normal, "   4) Drive the robot around your space (see docs/Mapping.txt");
    ArLog::log(ArLog::Normal, "   5) Go to Tools->Map Creation->Stop Scan");
    ArLog::log(ArLog::Normal, "   6) Start up Mapper3");
    ArLog::log(ArLog::Normal, "   7) Go to File->Open on Robot");
    ArLog::log(ArLog::Normal, "   8) Select the .2d you created");
    ArLog::log(ArLog::Normal, "   9) Create a .map");
    ArLog::log(ArLog::Normal, "  10) Go to File->Save on Robot");
    ArLog::log(ArLog::Normal, "  11) In MobileEyes, go to Tools->Robot Config");
    ArLog::log(ArLog::Normal, "  12) Choose the Files section");
    ArLog::log(ArLog::Normal, "  13) Enter the path and name of your new .map file for the value of the Map parameter.");
    ArLog::log(ArLog::Normal, "  14) Press OK and your new map should become the map used");
    ArLog::log(ArLog::Normal, "");    
  }

  // Print a log message notifying user of the directory for map files
  ArLog::log(ArLog::Normal, "");
  ArLog::log(ArLog::Normal, 
	     "Directory for maps and file serving: %s", fileDir);
  
  ArLog::log(ArLog::Normal, "See the ARNL README.txt for more information");
  ArLog::log(ArLog::Normal, "");

  // Do an initial localization of the robot. It tries all the home points
  // in the map, as well as the robot's current odometric position, as possible
  // places the robot is likely to be at startup.   If successful, it will
  // also save the position it found to be the best localized position as the
  // "Home" position, which can be obtained from the localization task (and is
  // used by the "Go to home" network request).
  locTask.localizeRobotAtHomeBlocking();
  
  // Let the client switch manager (for multirobot) spin off into its own thread
  // TODO move to multirobot example?
  clientSwitch.runAsync();

  // Start the networking server's thread
  server.runAsync();


  // Add a key handler so that you can exit by pressing
  // escape. Note that this key handler, however, prevents this program from
  // running in the background (e.g. as a system daemon or run from 
  // the shell with "&") -- it will lock up trying to read the keys; 
  // remove this if you wish to be able to run this program in the background.
  ArKeyHandler *keyHandler;
  if ((keyHandler = Aria::getKeyHandler()) == NULL)
  {
    keyHandler = new ArKeyHandler;
    Aria::setKeyHandler(keyHandler);
    robot.lock();
    robot.attachKeyHandler(keyHandler);
    robot.unlock();
    puts("Server running. To exit, press escape.");
  }


 	
   ArnlASyncTaskExample asyncTaskExample(&pathTask, &robot, &modeGoto, &parser);



  // Enable the motors and wait until the robot exits (disconnection, etc.) or this program is
  // canceled.
  robot.enableMotors();
  robot.waitForRunExit();
  Aria::exit(0);
}
Пример #5
0
int main(int argc, char **argv)
{
  Aria::init();
  ArRobot robot;
  ArArgumentParser parser(&argc, argv);
  ArSimpleConnector simpleConnector(&parser);

  // The base server object, manages all connections to clients.
  ArServerBase server;

  // This object simplifies configuration and opening of the ArServerBase
  // object.
  ArServerSimpleOpener simpleOpener(&parser);

  // parse the command line. fail and print the help if the parsing fails
  // or if the help was requested with -help
  parser.loadDefaultArguments();
  if (!simpleConnector.parseArgs() || !simpleOpener.parseArgs() || 
      !parser.checkHelpAndWarnUnparsed())
  {    
    simpleConnector.logOptions();
    simpleOpener.logOptions();
    exit(1);
  }

  // Use the ArSimpleOpener to open the server port
  if (!simpleOpener.open(&server))
  {
    ArLog::log(ArLog::Terse, "Error: Could not open server on port %d", simpleOpener.getPort());
    exit(1);
  }


  //
  // Create services attached to the base server:
  // 
  
  // Robot position etc.:
  ArServerInfoRobot serverInfoRobot(&server, &robot);

  // Robot control modes (only one mode can be active at once):
  ArServerModeStop modeStop(&server, &robot);    
  // old ArServerModeDrive modeDrive(&server, &robot); 
  ArServerModeRatioDrive modeRatioDrive(&server, &robot);
  ArServerModeWander modeWander(&server, &robot);
  modeStop.addAsDefaultMode();
  modeStop.activate();

  // This provides a simple way to add new commands.
  ArServerHandlerCommands commands(&server);

  // Add our custom command. ArServerHandlerCommands also has other methods
  // for adding commands taht take different kinds of arguments, or no
  // arguments.
  ArGlobalFunctor1<ArArgumentBuilder*> customCommandFunctor(&customCommandHandler);
  commands.addStringCommand("ExampleCustomCommand", "Example of a custom command. simpleServerExample will print out the text sent with the command.", &customCommandFunctor);
 
  // These objects provide various debugging and diagnostic custom commands:
  ArServerSimpleComUC uCCommands(&commands, &robot);  // Get information about the robot
  ArServerSimpleComMovementLogging loggingCommands(&commands, &robot);  // Control logging
  modeRatioDrive.addControlCommands(&commands);  // Drive mode diagnostics

  // This provides the client (e.g. MobileEyes) with a simple table of string values
  // (called an InfoGroup). An InfoGroup is kept globally by Aria.
  // The values in the table sent to clients are retrieved periodically by calling a 
  // functor.
  ArServerInfoStrings stringInfo(&server);
  Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());

  // Here are some example entries in the InfoGroup:
  Aria::getInfoGroup()->addStringInt(
	  "Motor Packet Count", 10, 
	  new ArConstRetFunctorC<int, ArRobot>(&robot, 
					       &ArRobot::getMotorPacCount));

  //
  // Connect to the robot:
  // 
  
  if (!simpleConnector.connectRobot(&robot))
  {
    printf("Error: Could not connect to robot... exiting\n");
    Aria::shutdown();
    return 1;
  }


  robot.enableMotors();
  robot.runAsync(true);

  // The simple opener might have information to display right before starting 
  // the server thread:
  simpleOpener.checkAndLog();

  // now let the server base run in a new thread, accepting client connections.
  server.runAsync();

  ArLog::log(ArLog::Normal, "Server is now running... Press Ctrl-C to exit.");

  robot.waitForRunExit();
  Aria::shutdown();
  exit(0);  
}
Пример #6
0
int main(int argc, char **argv)
{
  Aria::init();
  ArRobot robot;
  ArSonarDevice sonar;
  ArSick sick;
  robot.addRangeDevice(&sonar);
  ArServerBase server;

  // Argument parser:
  ArArgumentParser parser(&argc, argv);
  parser.loadDefaultArguments();

  // Connector and server opener:
  ArRobotConnector robotConnector(&parser, &robot);
  if(!robotConnector.connectRobot())
  {
    ArLog::log(ArLog::Terse, "popupExample: Could not connect to the robot.");
    if(parser.checkHelpAndWarnUnparsed())
    {
      Aria::logOptions();
    }
    Aria::exit(1);
  }

  ArLaserConnector laserConnector(&parser, &robot, &robotConnector);

  ArServerSimpleOpener simpleOpener(&parser);

  // Get command-line and other parameters
  if(!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
  {
    Aria::logOptions();
    Aria::exit(1);
  }

  robot.runAsync(true);

  // connect to the laser
  if(!laserConnector.connectLasers())
  {
    ArLog::log(ArLog::Normal, "popupExample: Warning: Could not connect to lasers.");
  }


  // Open the server
  if(!simpleOpener.open(&server))
  {
    ArLog::log(ArLog::Terse, "popupExample: Error, could not open server.");
    return 1;
  }
  server.runAsync();
  ArLog::log(ArLog::Normal, "popupExample: Server running. Press control-C to exit.");
  ArLog::log(ArLog::Normal, "popupExample: Each time an obstacle is detected near the robot, a new popup message will be created. Connect with MobileEyes to see them.");

  // Sends robot position etc.
  ArServerInfoRobot robotInfoServer(&server, &robot);

  // This service sends drawings e.g. showing range device positions
  ArServerInfoDrawings drawingsServer(&server);
  drawingsServer.addRobotsRangeDevices(&robot);

  // This service can send messages to clients to display as popup dialogs:
  ArServerHandlerPopup popupServer(&server);

  // This object contains the robot sensor interpretation task and creates
  // popups:
  SensorDetectPopup(&robot, &popupServer);

  // modes for controlling robot movement
  ArServerModeStop modeStop(&server, &robot);
  ArServerModeRatioDrive modeRatioDrive(&server, &robot);  
  ArServerModeWander modeWander(&server, &robot);
  modeStop.addAsDefaultMode();
  modeStop.activate();

  // allow configuration of driving and other settings
  ArServerHandlerConfig serverHandlerConfig(&server, Aria::getConfig()); // make a config handler
  ArLog::addToConfig(Aria::getConfig()); // let people configure logging

  modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings"); // able to configure teleop settings

  robot.enableMotors();
  robot.waitForRunExit();

  Aria::exit(0);
}
int main(int argc, char **argv)
{
  // Initialize Aria and Arnl global information
  Aria::init();
  Arnl::init();

  // You can change default ArLog options in this call, but the settings in the parameter file
  // (arnl.p) which is loaded below (Aria::getConfig()->parseFile())  will override the options.
  //ArLog::init(ArLog::File, ArLog::Normal, "log.txt", true, true);

  // Used to parse the command line arguments.
  ArArgumentParser parser(&argc, argv);
  
  // Load default arguments for this computer (from /etc/Aria.args, environment
  // variables, and other places)
  parser.loadDefaultArguments();

#ifdef ARNL_LASER
  // Tell the laser connector to always connect the first laser since
  // this program always requires a laser.
  parser.addDefaultArgument("-connectLaser");
#endif

  


  // The robot object
  ArRobot robot;

  // handle messages from robot controller firmware and log the contents
  robot.addPacketHandler(new ArGlobalRetFunctor1<bool, ArRobotPacket*>(&handleDebugMessage));

  // This object is used to connect to the robot, which can be configured via
  // command line arguments.
  ArRobotConnector robotConnector(&parser, &robot);

  // Connect to the robot
  if (!robotConnector.connectRobot())
  {
    ArLog::log(ArLog::Normal, "Error: Could not connect to robot... exiting");
    Aria::exit(3);
  }



  // Set up where we'll look for files. Arnl::init() set Aria's default
  // directory to Arnl's default directory; addDirectories() appends this
  // "examples" directory.
  char fileDir[1024];
  ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(), 
			 "examples");
  
  
  // To direct log messages to a file, or to change the log level, use these  calls:
  //ArLog::init(ArLog::File, ArLog::Normal, "log.txt", true, true);
  //ArLog::init(ArLog::File, ArLog::Verbose);
 
  // Add a section to the configuration to change ArLog parameters
  ArLog::addToConfig(Aria::getConfig());

  // set up a gyro (if the robot is older and its firmware does not
  // automatically incorporate gyro corrections, then this object will do it)
  ArAnalogGyro gyro(&robot);

  // Our networking server
  ArServerBase server;
  
#ifdef ARNL_GPSLOC
  // GPS connector.
  ArGPSConnector gpsConnector(&parser);
#endif

  // Set up our simpleOpener, used to set up the networking server
  ArServerSimpleOpener simpleOpener(&parser);

#ifdef ARNL_LASER
  // the laser connector
  ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
#endif

  // used to connect to camera PTZ control
  ArPTZConnector ptzConnector(&parser, &robot);

#ifdef ARNL_MULTIROBOT
  // Used to connect to a "central server" which can be used as a proxy 
  // for multiple robot servers, and as a way for them to also communicate with
  // each other.  (objects implementing some of these inter-robot communication
  // features are created below).  
  // NOTE: If the central server is running on the same host as robot server(s),
  // then you must use the -serverPort argument to instruct these robot-control
  // server(s) to use different ports than the default 7272, since the central
  // server will use that port.
  ArClientSwitchManager clientSwitch(&server, &parser);
#endif
  
  // Load default arguments for this computer (from /etc/Aria.args, environment
  // variables, and other places)
  parser.loadDefaultArguments();

  // Parse arguments 
  if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
  {
    logOptions(argv[0]);
    Aria::exit(1);
  }
  

  // This causes Aria::exit(9) to be called if the robot unexpectedly
  // disconnects
  ArGlobalFunctor1<int> shutdownFunctor(&Aria::exit, 9);
  robot.addDisconnectOnErrorCB(&shutdownFunctor);


  // Create an ArSonarDevice object (ArRangeDevice subclass) and 
  // connect it to the robot.
  ArSonarDevice sonarDev;
  robot.addRangeDevice(&sonarDev);



  // This object will allow robot's movement parameters to be changed through
  // a Robot Configuration section in the ArConfig global configuration facility.
  ArRobotConfig robotConfig(&robot);

  // Include gyro configuration options in the robot configuration section.
  robotConfig.addAnalogGyro(&gyro);

  // Start the robot thread.
  robot.runAsync(true);

#ifdef ARNL_GPSLOC
  // On the Seekur, power to the GPS receiver is switched on by this command.
  // (A third argument of 0 would turn it off). On other robots this command is
  // ignored. If this fails, you may need to reset the port with ARIA demo or 
  // seekurPower program (turn port off then on again).  If the port is already
  // on, it will have no effect on the GPS (it will remain powered.)
  // Do this now before connecting to lasers to give it plenty of time to power
  // on, initialize, and find a good position before GPS localization begins.
  ArLog::log(ArLog::Normal, "Turning on GPS power... (Seekur/Seekur Jr. power port 6)");
  robot.com2Bytes(116, 6, 1);
#endif
  
#ifdef ARNL_LASER

  // connect the laser(s) if it was requested, this adds them to the
  // robot too, and starts them running in their own threads
  ArLog::log(ArLog::Normal, "Connecting to laser(s) configured in parameters...");
  if (!laserConnector.connectLasers())
  {
    ArLog::log(ArLog::Normal, "Error: Could not connect to laser(s). Exiting.");
    Aria::exit(2);
  }
  ArLog::log(ArLog::Normal, "Done connecting to laser(s).");
#endif

#if defined(ARNL_LASERLOC) || defined(ARNL_MAPPING)
  // find the laser we should use for localization and/or mapping,
  // which will be the first laser
  robot.lock();
  ArLaser *firstLaser = robot.findLaser(1);
  if (firstLaser == NULL || !firstLaser->isConnected())
  {
    ArLog::log(ArLog::Normal, "Did not have laser 1 or it is not connected, cannot start localization and/or mapping... exiting");
    Aria::exit(2);
  }
  robot.unlock();
#endif  


    /* Create and set up map object */
  
  // Set up the map object, this will look for files in the examples
  // directory (unless the file name starts with a /, \, or .
  // You can take out the 'fileDir' argument to look in the program's current directory
  // instead.
  // When a configuration file is loaded into ArConfig later, if it specifies a
  // map file, then that file will be loaded as the map.
  ArMap map(fileDir);
  // set it up to ignore empty file names (otherwise if a configuration omits
  // the map file, the whole configuration change will fail)
  map.setIgnoreEmptyFileName(true);
  // ignore the case, so that if someone is using MobileEyes or
  // MobilePlanner from Windows and changes the case on a map name,
  // it will still work.
  map.setIgnoreCase(true);

    
    /* Create localization threads */

#ifdef ARNL_MULTILOC
  ArLocalizationManager locManager(&robot, &map);
#define LOCTASK locManager
#endif


#ifdef ARNL_LASERLOC
  ArLog::log(ArLog::Normal, "Creating laser localization task");
  // Laser Monte-Carlo Localization
  ArLocalizationTask locTask(&robot, firstLaser, &map);
#ifdef ARNL_MULTILOC
  locManager.addLocalizationTask(&locTask);
#else
#define LOCTASK locTask
#endif
#endif
  

#ifdef ARNL_SONARLOC
  ArLog::log(ArLog::Normal, "Creating sonar localization task");
  ArSonarLocalizationTask locTask(&robot, &sonarDev, &map);
#ifdef ARNL_MULTILOC
  locManager.addLocalizationTask(&locTask);
#else
#define LOCTASK locTask
#endif
#endif

#ifndef ARNL_GPSLOC
  // A callback function, which is called if localization fails
  ArGlobalFunctor1<int> locFailedCB(&locFailed);
  locTask.setFailedCallBack(&locFailedCB); //, &locTask);
#endif

#ifdef ARNL_GPSLOC
  ArLog::log(ArLog::Normal, "Connecting to GPS...");

  // Connect to GPS
  ArGPS *gps = gpsConnector.createGPS(&robot);
  if(!gps || !gps->connect())
  {
    ArLog::log(ArLog::Terse, "Error connecting to GPS device."
      "Try -gpsType, -gpsPort, and/or -gpsBaud command-line arguments."
      "Use -help for help. Exiting.");
    Aria::exit(5);
  }

  // set up GPS localization task
  ArLog::log(ArLog::Normal, "Creating GPS localization task");
  ArGPSLocalizationTask gpsLocTask(&robot, gps, &map);
#ifdef ARNL_MULTILOC
  locManager.addLocalizationTask(&gpsLocTask);
#else
#define LOCTASK gpsLocTask
#endif
#endif

#ifdef ARNL_LASER
  // Set some options  and callbacks on each laser that the laser connector 
  // connected to.
  std::map<int, ArLaser *>::iterator laserIt;
  for (laserIt = robot.getLaserMap()->begin();
       laserIt != robot.getLaserMap()->end();
       laserIt++)
  {
    int laserNum = (*laserIt).first;
    ArLaser *laser = (*laserIt).second;

    // Skip lasers that aren't connected
    if(!laser->isConnected())
      continue;

    // add the disconnectOnError CB to shut things down if the laser
    // connection is lost
    laser->addDisconnectOnErrorCB(&shutdownFunctor);
    // set the number of cumulative readings the laser will take
    laser->setCumulativeBufferSize(200);
    // set the cumulative clean offset (so that they don't all fire at once)
    laser->setCumulativeCleanOffset(laserNum * 100);
    // reset the cumulative clean time (to make the new offset take effect)
    laser->resetLastCumulativeCleanTime();

    // Add the packet count to the Aria info strings (It will be included in
    // MobileEyes custom details so you can monitor whether the laser data is
    // being received correctly)
    std::string laserPacketCountName;
    laserPacketCountName = laser->getName();
    laserPacketCountName += " Packet Count";
    Aria::getInfoGroup()->addStringInt(
	    laserPacketCountName.c_str(), 10, 
	    new ArRetFunctorC<int, ArLaser>(laser, 
					 &ArLaser::getReadingCount));
  }
#endif





    /* Start the server */

  // Open the networking server
  if (!simpleOpener.open(&server, fileDir, 240))
  {
    ArLog::log(ArLog::Normal, "Error: Could not open server.");
    exit(2);
  }



    /* Create various services that provide network access to clients (such as
     * MobileEyes), as well as add various additional features to ARNL */


  robot.unlock();



  
  // Service to provide drawings of data in the map display :
  ArServerInfoDrawings drawings(&server);
  drawings.addRobotsRangeDevices(&robot);

#ifdef ARNL_LASERLOC
  /* Show the sample points used by MCL */
  ArDrawingData drawingDataL("polyDots", ArColor(0,255,0), 100, 75);
  ArFunctor2C<ArLocalizationTask, ArServerClient *, ArNetPacket *> 
    drawingFunctorL(&locTask, &ArLocalizationTask::drawRangePoints);
  drawings.addDrawing(&drawingDataL, "Localization Points", &drawingFunctorL);
#endif

#ifdef ARNL_GPSLOC
  /* Show the positions calculated by GPS localization */

  ArDrawingData drawingDataG("polyDots", ArColor(100,100,255), 130, 61);
  ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *> 
    drawingFunctorG(&gpsLocTask, &ArGPSLocalizationTask::drawGPSPoints);
  drawings.addDrawing(&drawingDataG, "GPS Points", &drawingFunctorG);

  ArDrawingData drawingDataG2("polyDots", ArColor(255,100,100), 100, 62);
  ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *> 
    drawingFunctorG2(&gpsLocTask, &ArGPSLocalizationTask::drawKalmanPoints);
  drawings.addDrawing(&drawingDataG2, "Kalman Points", &drawingFunctorG2);

  ArDrawingData drawingDataG3("polyDots", ArColor(100,255,100), 70, 63);
  ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *> 
    drawingFunctorG3(&gpsLocTask, &ArGPSLocalizationTask::drawOdoPoints);
  drawings.addDrawing(&drawingDataG3, "Odom. Points", &drawingFunctorG3);

  ArDrawingData drawingDataG4("polyDots", ArColor(255,50,50), 100, 75);
  ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *> 
    drawingFunctorG4(&gpsLocTask, &ArGPSLocalizationTask::drawKalmanRangePoints);
  drawings.addDrawing(&drawingDataG4, "KalRange Points", &drawingFunctorG4);

  ArDrawingData drawingDataG5("polySegments", ArColor(100,0,255), 1, 78);
  ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *> 
    drawingFunctorG5(&gpsLocTask, &ArGPSLocalizationTask::drawKalmanVariance);
  drawings.addDrawing(&drawingDataG5, "VarGPS", &drawingFunctorG5);
#endif

  // "Custom" commands. You can add your own custom commands here, they will
  // be available in MobileEyes' custom commands (enable in the toolbar or
  // access through Robot Tools)
  ArServerHandlerCommands commands(&server);


  // These provide various kinds of information to the client:
  ArServerInfoRobot serverInfoRobot(&server, &robot);
  ArServerInfoSensor serverInfoSensor(&server, &robot);

  // Provides localization info and allows the client (MobileEyes) to relocalize at a given
  // pose:
  ArServerInfoLocalization serverInfoLocalization(&server, &robot, &LOCTASK);
  ArServerHandlerLocalization serverLocHandler(&server, &robot, &LOCTASK);

  // If you're using MobileSim, ArServerHandlerLocalization sends it a command
  // to move the robot's true pose if you manually do a localization through 
  // MobileEyes.  To disable that behavior, use this constructor call instead:
  // ArServerHandlerLocalization serverLocHandler(&server, &robot, true, false);
  // The fifth argument determines whether to send the command to MobileSim.

  // Provide the map to the client (and related controls):
  ArServerHandlerMap serverMap(&server, &map);

  // These objects add some simple (custom) commands to 'commands' for testing and debugging:
  ArServerSimpleComUC uCCommands(&commands, &robot);                   // Send any command to the microcontroller
  ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // configure logging
  ArServerSimpleComLogRobotConfig configCommands(&commands, &robot);   // trigger logging of the robot config parameters
//  ArServerSimpleServerCommands serverCommands(&commands, &server);     // monitor networking behavior (track packets sent etc.)


  // service that allows the client to monitor the communication link status
  // between the robot and the client.
  //
  ArServerHandlerCommMonitor handlerCommMonitor(&server);



  // service that allows client to change configuration parameters in ArConfig 
  ArServerHandlerConfig handlerConfig(&server, Aria::getConfig(),
				      Arnl::getTypicalDefaultParamFileName(),
				      Aria::getDirectory());


  // This service causes the client to show simple dialog boxes
  ArServerHandlerPopup popupServer(&server);




  /* Set up the possible modes for remote control from a client such as
   * MobileEyes:
   */

  // Mode To stop and remain stopped:
  ArServerModeStop modeStop(&server, &robot);

#ifndef ARNL_SONARLOC
  // Cause the sonar to turn off automatically
  // when the robot is stopped, and turn it back on when commands to move
  // are sent. (Note, if using SONARNL to localize, then don't do this
  // since localization may get lost)
  ArSonarAutoDisabler sonarAutoDisabler(&robot);
#endif

  // Teleoperation modes To drive by keyboard, joystick, etc:
  ArServerModeRatioDrive modeRatioDrive(&server, &robot);  



  // Prevent normal teleoperation driving if localization is lost using
  // a high-priority action, which enables itself when the particular mode is
  // active.
  // (You have to enter unsafe drive mode to drive when lost.)
  ArActionLost actionLostRatioDrive(&LOCTASK, NULL, &modeRatioDrive);
  modeRatioDrive.getActionGroup()->addAction(&actionLostRatioDrive, 110);

  // Add drive mode section to the configuration, and also some custom (simple) commands:
  modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings");
  modeRatioDrive.addControlCommands(&commands);

  // Wander mode (also prevent wandering if lost):
  ArServerModeWander modeWander(&server, &robot);
  ArActionLost actionLostWander(&LOCTASK, NULL, &modeWander);
  modeWander.getActionGroup()->addAction(&actionLostWander, 110);

  // Tool to log data periodically to a file
  ArDataLogger dataLogger(&robot, "datalog.txt");
  dataLogger.addToConfig(Aria::getConfig()); // make it configurable through ArConfig

  // Automatically add anything from the global info group to the data logger.
  Aria::getInfoGroup()->addAddStringCallback(dataLogger.getAddStringFunctor());

  // This provides a small table of interesting information for the client
  // to display to the operator. You can add your own callbacks to show any
  // data you want.
  ArServerInfoStrings stringInfo(&server);
  Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
  
  // The following statements add fields to a set of informational data called
  // the InfoGroup. These are served to MobileEyes for displayi (turn on by enabling Details
  // and Custom Details in the View menu of MobileEyes.)

  Aria::getInfoGroup()->addStringInt(
	  "Motor Packet Count", 10, 
	  new ArConstRetFunctorC<int, ArRobot>(&robot, 
					       &ArRobot::getMotorPacCount));

#ifdef ARNL_LASERLOC
  Aria::getInfoGroup()->addStringDouble(
	  "Laser Localization Score", 8, 
	  new ArRetFunctorC<double, ArLocalizationTask>(
		  &locTask, &ArLocalizationTask::getLocalizationScore),
	  "%.03f");
  Aria::getInfoGroup()->addStringInt(
	  "Laser Loc Num Samples", 8, 
	  new ArRetFunctorC<int, ArLocalizationTask>(
		  &locTask, &ArLocalizationTask::getCurrentNumSamples),
	  "%4d");
#elif defined(ARNL_SONARLOC)
  Aria::getInfoGroup()->addStringDouble(
	  "Sonar Localization Score", 8, 
	  new ArRetFunctorC<double, ArSonarLocalizationTask>(
		  &locTask, 
      &ArSonarLocalizationTask::getLocalizationScore),
	  "%.03f");
  Aria::getInfoGroup()->addStringInt(
	  "Sonar Loc Num Samples", 8, 
	  new ArRetFunctorC<int, ArSonarLocalizationTask>(
		  &locTask, &ArSonarLocalizationTask::getCurrentNumSamples),
	  "%4d");
#endif

#ifdef ARNL_GPSLOC
  const char *dopfmt = "%2.4f";
  const char *posfmt = "%2.8f";
  const char *altfmt = "%3.6f m";
  Aria::getInfoGroup()->addStringString(
	    "GPS Fix Mode", 25,
	    new ArConstRetFunctorC<const char*, ArGPS>(gps, &ArGPS::getFixTypeName)
    );
  Aria::getInfoGroup()->addStringInt(
	    "GPS Num. Satellites", 4,
	    new ArConstRetFunctorC<int, ArGPS>(gps, &ArGPS::getNumSatellitesTracked)
    );
  Aria::getInfoGroup()->addStringDouble(
	    "GPS HDOP", 12,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getHDOP),
      dopfmt
    );
  Aria::getInfoGroup()->addStringDouble(
	    "GPS VDOP", 5,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getVDOP),
      dopfmt
    );
  Aria::getInfoGroup()->addStringDouble(
	    "GPS PDOP", 5,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getPDOP),
      dopfmt
    );
  Aria::getInfoGroup()->addStringDouble(
	    "Latitude", 15,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getLatitude),
      posfmt
    );
  Aria::getInfoGroup()->addStringDouble(
	    "Longitude", 15,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getLongitude),
      posfmt
    );
  Aria::getInfoGroup()->addStringDouble(
	    "Altitude", 8,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getAltitude),
      altfmt
    );

  // only some GPS receivers provide these, but you can uncomment them
  // here to enable them if yours does.
  /*
  const char *errfmt = "%2.4f m";
  Aria::getInfoGroup()->addStringDouble(
	    "GPS Lat. Err.", 6,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getLatitudeError),
      errfmt
    );
  Aria::getInfoGroup()->addStringDouble(
	    "GPS Lon. Err.", 6,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getLongitudeError),
      errfmt
    );
  Aria::getInfoGroup()->addStringDouble(
	    "GPS Alt. Err.", 6,
	    new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getAltitudeError),
      errfmt
    );
  */

  Aria::getInfoGroup()->addStringDouble(
    "MOGS Localization Score", 8,
    new ArRetFunctorC<double, ArGPSLocalizationTask>(
      &gpsLocTask, &ArGPSLocalizationTask::getLocalizationScore),
    "%.03f"
  );

#endif

  // Display gyro status if gyro is enabled and is being handled by the firmware (gyro types 2, 3, or 4).
  // (If the firmware detects an error communicating with the gyro or IMU it
  // returns a flag, and stops using it.)
  // (This gyro type parameter, and fault flag, are only in ARCOS, not Seekur firmware)
  if(robot.getOrigRobotConfig() && robot.getOrigRobotConfig()->getGyroType() > 1)
  {
    Aria::getInfoGroup()->addStringString(
          "Gyro/IMU Status", 10,
          new ArGlobalRetFunctor1<const char*, ArRobot*>(&getGyroStatusString, &robot)
      );
  }

  // Display system CPU and wireless network status
  ArSystemStatus::startPeriodicUpdate(1000); // update every 1 second
  Aria::getInfoGroup()->addStringDouble("CPU Use", 10, ArSystemStatus::getCPUPercentFunctor(), "% 4.0f%%");
  Aria::getInfoGroup()->addStringInt("Wireless Link Quality", 9, ArSystemStatus::getWirelessLinkQualityFunctor(), "%d");
  Aria::getInfoGroup()->addStringInt("Wireless Link Noise", 9, ArSystemStatus::getWirelessLinkNoiseFunctor(), "%d");
  Aria::getInfoGroup()->addStringInt("Wireless Signal", 9, ArSystemStatus::getWirelessLinkSignalFunctor(), "%d");
  

  // stats on how far its driven since software started
  Aria::getInfoGroup()->addStringDouble("Distance Travelled (m)", 20, new ArRetFunctorC<double, ArRobot>(&robot, &ArRobot::getOdometerDistanceMeters), "%.2f");
  Aria::getInfoGroup()->addStringDouble("Run time (min)", 20, new
ArRetFunctorC<double, ArRobot>(&robot, &ArRobot::getOdometerTimeMinutes),
"%.2f");


#ifdef ARNL_GPSLOC
  // Add some "custom commands" for setting up initial GPS offset and heading.
  gpsLocTask.addLocalizationInitCommands(&commands);
  
  // Add some commands for manually creating map objects based on GPS positions:
//  ArGPSMapTools gpsMapTools(gps, &robot, &commands, &map);

  // Add command to set simulated GPS position manually
  if(gpsConnector.getGPSType() == ArGPSConnector::Simulator)
  {
    ArSimulatedGPS *simGPS = dynamic_cast<ArSimulatedGPS*>(gps);
//    simGPS->setDummyPosition(42.80709, -71.579047, 100);
    commands.addStringCommand("GPS:setDummyPosition", 
      "Manually set a new dummy position for simulated GPS. Provide latitude (required), longitude (required) and altitude (optional)", 
      new ArFunctor1C<ArSimulatedGPS, ArArgumentBuilder*>(simGPS, &ArSimulatedGPS::setDummyPositionFromArgs)
    );
  }
#endif


  // Make Stop mode the default (If current mode deactivates without entering
  // a new mode, then Stop Mode will be selected)
  modeStop.addAsDefaultMode();
    // TODO move up near where stop mode is created?




#ifdef ARNL_MAPPING

  /* Services that allow the client to initiate scanning with the laser to
     create maps in Mapper3 (So not possible with SONARNL): */

  ArServerHandlerMapping handlerMapping(&server, &robot, firstLaser, 
					fileDir, "", true);

#ifdef ARNL_LASERLOC
  // make laser localization stop while mapping
  handlerMapping.addMappingStartCallback(
	  new ArFunctor1C<ArLocalizationTask, bool>
	  (&locTask, &ArLocalizationTask::setIdleFlag, true));

  // and then make it start again when we're doine
  handlerMapping.addMappingEndCallback(
	  new ArFunctor1C<ArLocalizationTask, bool>
	  (&locTask, &ArLocalizationTask::setIdleFlag, false));
#endif

#ifdef ARNL_GPSLOC
  // Save GPS positions in the .2d scan log when making a map
  handlerMapping.addLocationData("robotGPS", 
			    gpsLocTask.getPoseInterpPositionCallback());

  // add the starting latitude and longitude info to the .2d scan log
  handlerMapping.addMappingStartCallback(
	  new ArFunctor1C<ArGPSLocalizationTask, ArServerHandlerMapping *>
	  (&gpsLocTask, &ArGPSLocalizationTask::addScanInfo, 
	   &handlerMapping));
#endif

  // Make it so our "lost" actions don't stop us while mapping
  handlerMapping.addMappingStartCallback(actionLostRatioDrive.getDisableCB());
  handlerMapping.addMappingStartCallback(actionLostWander.getDisableCB());

  // And then let them make us stop as usual when done mapping
  handlerMapping.addMappingEndCallback(actionLostRatioDrive.getEnableCB());
  handlerMapping.addMappingEndCallback(actionLostWander.getEnableCB());

#endif // ARNL_MAPPING


  /*
  // If we are on a simulator, move the robot back to its starting position,
  // and reset its odometry.
  // This will allow localizeRobotAtHomeBlocking() below will (probably) work (it
  // tries current odometry (which will be 0,0,0) and all the map
  // home points.
  // (Ignored by a real robot)
  //robot.com(ArCommands::SIM_RESET);
  */


  // create a pose storage class, this will let the program keep track
  // of where the robot is between runs...  after we try and restore
  // from this file it will start saving the robot's pose into the
  // file
  ArPoseStorage poseStorage(&robot);
  /// if we could restore the pose from then set the sim there (this
  /// won't do anything to the real robot)... if we couldn't restore
  /// the pose then just reset the position of the robot (which again
  /// won't do anything to the real robot)
  if (poseStorage.restorePose("robotPose"))
    serverLocHandler.setSimPose(robot.getPose());
  //else
 //   robot.com(ArCommands::SIM_RESET);



  /* File transfer services: */
  
#pragma GPP off
#ifdef WIN32
  // Not implemented for Windows yet.
  ArLog::log(ArLog::Normal, "Note, file upload/download services are not implemented for Windows; not enabling them.");
#else
  // This block will allow you to set up where you get and put files
  // to/from, just comment them out if you don't want this to happen
  // /*
  ArServerFileLister fileLister(&server, fileDir);
  ArServerFileToClient fileToClient(&server, fileDir);
  ArServerFileFromClient fileFromClient(&server, fileDir, "/tmp");
  ArServerDeleteFileOnServer deleteFileOnServer(&server, fileDir);
  // */
#endif
#pragma GPP on

    /* Video image streaming, and camera controls (Requires SAVserver or ACTS) */

  // Forward one video stream if either ACTS, ArVideo videoSubServer, 
  // or SAV server are running.
  // ArHybridForwarderVideo allows this program to be separate from the ArVideo
  // library. You could replace videoForwarder and the PTZ connection code below
  // with a call to ArVideo::createVideoServers(), and link the program to the
  // ArVideo library if you want to include video capture in the same program
  // as robot control.
  ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);
  
  // connect to first configured camera PTZ controls (in robot parameter file and
  // command line options)
  ptzConnector.connect();
  ArCameraCollection cameraCollection;
  ArPTZ *ptz = ptzConnector.getPTZ(0);
  if(ptz)
  {
    ArLog::log(ArLog::Normal, "Connected to PTZ Camera");
    cameraCollection.addCamera("Camera1", ptz->getTypeName(), "Camera", ptz->getTypeName());

    videoForwarder.setCameraName("Camera1");
    videoForwarder.addToCameraCollection(cameraCollection);

    new ArServerHandlerCamera("Camera1", 
      &server, 
      &robot,
      ptz, 
      &cameraCollection);

  } 

  // Allows client to find any camera servers created above
  ArServerHandlerCameraCollection cameraCollectionServer(&server, &cameraCollection);



    /* Load configuration values, map, and begin! */

  
  // When parsing the configuration file, also look at the program's command line options 
  // from the command-line argument parser as well as the configuration file.
  // (So you can use any argument on the command line, namely -map.) 
  Aria::getConfig()->useArgumentParser(&parser);

  // Read in parameter files.
  ArLog::log(ArLog::Normal, "Loading config file %s%s into ArConfig...", Aria::getDirectory(), Arnl::getTypicalParamFileName());
  if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
  {
    ArLog::log(ArLog::Normal, "Could not load ARNL configuration file. Set ARNL environment variable to use non-default installation director.y");
    Aria::exit(5);
  }

  // Warn about unknown params.
  if (!simpleOpener.checkAndLog() || !parser.checkHelpAndWarnUnparsed())
  {
    logOptions(argv[0]);
    Aria::exit(6);
  }

  // Warn if there is no map
  if (map.getFileName() == NULL || strlen(map.getFileName()) <= 0)
  {
    ArLog::log(ArLog::Normal, "");
    ArLog::log(ArLog::Normal, "### No map file is set up, you can make a map with the following procedure");
#ifdef ARNL
    ArLog::log(ArLog::Normal, "   0) You can find this information in README.txt or docs/Mapping.txt");
    ArLog::log(ArLog::Normal, "   1) Connect to this server with MobileEyes");
    ArLog::log(ArLog::Normal, "   2) Go to Tools->Map Creation->Start Scan");
    ArLog::log(ArLog::Normal, "   3) Give the map a name and hit okay");
    ArLog::log(ArLog::Normal, "   4) Drive the robot around your space (see docs/Mapping.txt");
    ArLog::log(ArLog::Normal, "   5) Go to Tools->Map Creation->Stop Scan");
    ArLog::log(ArLog::Normal, "   6) Start up Mapper3");
    ArLog::log(ArLog::Normal, "   7) Go to File->Open on Robot");
    ArLog::log(ArLog::Normal, "   8) Select the .2d you created");
    ArLog::log(ArLog::Normal, "   9) Create a .map");
    ArLog::log(ArLog::Normal, "  10) Go to File->Save on Robot");
    ArLog::log(ArLog::Normal, "  11) In MobileEyes, go to Tools->Robot Config");
    ArLog::log(ArLog::Normal, "  12) Choose the Files section");
    ArLog::log(ArLog::Normal, "  13) Enter the path and name of your new .map file for the value of the Map parameter.");
    ArLog::log(ArLog::Normal, "  14) Press OK and your new map should become the map used");
    ArLog::log(ArLog::Normal, "");    
#elif defined(SONARNL)
    ArLog::log(ArLog::Normal, "   0) You can find this information in README.txt or docs/SonarMapping.txt");
    ArLog::log(ArLog::Normal, "   1) Start up Mapper3Basic");
    ArLog::log(ArLog::Normal, "   2) Go to File->New");
    ArLog::log(ArLog::Normal, "   3) Draw a line map of your area (make sure it is to scale)");
    ArLog::log(ArLog::Normal, "   4) Go to File->Save on Robot");
    ArLog::log(ArLog::Normal, "   5) In MobileEyes, go to Tools->Robot Config");
    ArLog::log(ArLog::Normal, "   6) Choose the Files section");
    ArLog::log(ArLog::Normal, "   7) Enter the path and name of your new .map file for the value of the Map parameter.");
    ArLog::log(ArLog::Normal, "   8) Press OK and your new map should become the map used");
    ArLog::log(ArLog::Normal, "");    
#endif
#ifdef ARNL_GPSLOC
    ArLog::log(ArLog::Normal, "\n   See docs/GPSMapping.txt for instructions on creating a map for GPS localization");
#endif
  }

  // Print a log message notifying user of the directory for map files
  ArLog::log(ArLog::Normal, "");
  ArLog::log(ArLog::Normal, 
	     "Directory for maps and file serving: %s", fileDir);
  
  ArLog::log(ArLog::Normal, "See the ARNL README.txt for more information");
  ArLog::log(ArLog::Normal, "");

  // Do an initial localization of the robot. ARNL and SONARNL try all the home points
  // in the map, as well as the robot's current odometric position, as possible
  // places the robot is likely to be at startup.   If successful, it will
  // also save the position it found to be the best localized position as the
  // "Home" position, which can be obtained from the localization task (and is
  // used by the "Go to home" network request).
  // MOGS instead just initializes at the current GPS position.
  // (You will stil have to drive the robot so it can determine the robot's
  // heading, however. See GPS Mapping instructions.)
  LOCTASK.localizeRobotAtHomeBlocking();
  
#ifdef ARNL_MULTIROBOT
  // Let the client switch manager (for multirobot) spin off into its own thread
  // TODO move to multirobot example?
  clientSwitch.runAsync();
#endif

  // Start the networking server's thread
  server.runAsync();

  ArLog::log(ArLog::Normal, "Server running. To exit, press CTRL-C.");

  // Enable the motors and wait until the robot exits (disconnection, etc.) or this program is
  // canceled.
  robot.enableMotors();
  robot.waitForRunExit();
  Aria::exit(0);
}