void
mps_print_sasphy0(struct mps_softc *sc, MPI2_CONFIG_PAGE_SAS_PHY_0 *buf)
{
MPS_PRINTFIELD_START(sc, "SAS PHY Page 0");
MPS_PRINTFIELD(sc, buf, OwnerDevHandle, 0x%04x);
MPS_PRINTFIELD(sc, buf, AttachedDevHandle, 0x%04x);
MPS_PRINTFIELD(sc, buf, AttachedPhyIdentifier, %d);
mps_dprint_field(sc, MPS_INFO, "AttachedPhyInfo Reason: %s (0x%x)\n",
mps_describe_table(mps_phyinfo_reason_names,
buf->AttachedPhyInfo & 0xf), buf->AttachedPhyInfo);
mps_dprint_field(sc, MPS_INFO, "ProgrammedLinkRate: %s (0x%x)\n",
mps_describe_table(mps_linkrate_names,
(buf->ProgrammedLinkRate >> 4) & 0xf), buf->ProgrammedLinkRate);
mps_dprint_field(sc, MPS_INFO, "HwLinkRate: %s (0x%x)\n",
mps_describe_table(mps_linkrate_names,
(buf->HwLinkRate >> 4) & 0xf), buf->HwLinkRate);
MPS_PRINTFIELD(sc, buf, ChangeCount, %d);
MPS_PRINTFIELD(sc, buf, Flags, 0x%x);
mps_dprint_field(sc, MPS_INFO, "PhyInfo Reason: %s (0x%x)\n",
mps_describe_table(mps_phyinfo_reason_names,
(buf->PhyInfo >> 16) & 0xf), buf->PhyInfo);
mps_dprint_field(sc, MPS_INFO, "NegotiatedLinkRate: %s (0x%x)\n",
mps_describe_table(mps_linkrate_names,
buf->NegotiatedLinkRate & 0xf), buf->NegotiatedLinkRate);
}
void
mps_print_sasdev0(struct mps_softc *sc, MPI2_CONFIG_PAGE_SAS_DEV_0 *buf)
{
MPS_PRINTFIELD_START(sc, "SAS Device Page 0");
MPS_PRINTFIELD(sc, buf, Slot, %d);
MPS_PRINTFIELD(sc, buf, EnclosureHandle, 0x%x);
mps_dprint_field(sc, MPS_INFO, "SASAddress: 0x%jx\n",
mps_to_u64(&buf->SASAddress));
MPS_PRINTFIELD(sc, buf, ParentDevHandle, 0x%x);
MPS_PRINTFIELD(sc, buf, PhyNum, %d);
MPS_PRINTFIELD(sc, buf, AccessStatus, 0x%x);
MPS_PRINTFIELD(sc, buf, DevHandle, 0x%x);
MPS_PRINTFIELD(sc, buf, AttachedPhyIdentifier, 0x%x);
MPS_PRINTFIELD(sc, buf, ZoneGroup, %d);
mps_dprint_field(sc, MPS_INFO, "DeviceInfo: %b,%s\n", buf->DeviceInfo,
"\20" "\4SataHost" "\5SmpInit" "\6StpInit" "\7SspInit"
"\10SataDev" "\11SmpTarg" "\12StpTarg" "\13SspTarg" "\14Direct"
"\15LsiDev" "\16AtapiDev" "\17SepDev",
mps_describe_table(mps_sasdev0_devtype, buf->DeviceInfo & 0x03));
MPS_PRINTFIELD(sc, buf, Flags, 0x%x);
MPS_PRINTFIELD(sc, buf, PhysicalPort, %d);
MPS_PRINTFIELD(sc, buf, MaxPortConnections, %d);
mps_dprint_field(sc, MPS_INFO, "DeviceName: 0x%jx\n",
mps_to_u64(&buf->DeviceName));
MPS_PRINTFIELD(sc, buf, PortGroups, %d);
MPS_PRINTFIELD(sc, buf, DmaGroup, %d);
MPS_PRINTFIELD(sc, buf, ControlGroup, %d);
}
void
mps_describe_devinfo(uint32_t devinfo, char *string, int len)
{
snprintf(string, len, "%b,%s", devinfo,
"\20" "\4SataHost" "\5SmpInit" "\6StpInit" "\7SspInit"
"\10SataDev" "\11SmpTarg" "\12StpTarg" "\13SspTarg" "\14Direct"
"\15LsiDev" "\16AtapiDev" "\17SepDev",
mps_describe_table(mps_sasdev0_devtype, devinfo & 0x03));
}
void
mps_print_event(struct mps_softc *sc, MPI2_EVENT_NOTIFICATION_REPLY *event)
{
MPS_EVENTFIELD_START(sc, "EventReply");
MPS_EVENTFIELD(sc, event, EventDataLength, %d);
MPS_EVENTFIELD(sc, event, AckRequired, %d);
mps_dprint_field(sc, MPS_EVENT, "Event: %s (0x%x)\n",
mps_describe_table(mps_event_names, event->Event), event->Event);
MPS_EVENTFIELD(sc, event, EventContext, 0x%x);
}
void
mps_print_expander1(struct mps_softc *sc, MPI2_CONFIG_PAGE_EXPANDER_1 *buf)
{
MPS_PRINTFIELD_START(sc, "SAS Expander Page 1 #%d", buf->Phy);
MPS_PRINTFIELD(sc, buf, PhysicalPort, %d);
MPS_PRINTFIELD(sc, buf, NumPhys, %d);
MPS_PRINTFIELD(sc, buf, Phy, %d);
MPS_PRINTFIELD(sc, buf, NumTableEntriesProgrammed, %d);
mps_dprint_field(sc, MPS_INFO, "ProgrammedLinkRate: %s (0x%x)\n",
mps_describe_table(mps_linkrate_names,
(buf->ProgrammedLinkRate >> 4) & 0xf), buf->ProgrammedLinkRate);
mps_dprint_field(sc, MPS_INFO, "HwLinkRate: %s (0x%x)\n",
mps_describe_table(mps_linkrate_names,
(buf->HwLinkRate >> 4) & 0xf), buf->HwLinkRate);
MPS_PRINTFIELD(sc, buf, AttachedDevHandle, 0x%04x);
mps_dprint_field(sc, MPS_INFO, "PhyInfo Reason: %s (0x%x)\n",
mps_describe_table(mps_phyinfo_reason_names,
(buf->PhyInfo >> 16) & 0xf), buf->PhyInfo);
mps_dprint_field(sc, MPS_INFO, "AttachedDeviceInfo: %b,%s\n",
buf->AttachedDeviceInfo, "\20" "\4SATAhost" "\5SMPinit" "\6STPinit"
"\7SSPinit" "\10SATAdev" "\11SMPtarg" "\12STPtarg" "\13SSPtarg"
"\14Direct" "\15LSIdev" "\16ATAPIdev" "\17SEPdev",
mps_describe_table(mps_sasdev0_devtype,
buf->AttachedDeviceInfo & 0x03));
MPS_PRINTFIELD(sc, buf, ExpanderDevHandle, 0x%04x);
MPS_PRINTFIELD(sc, buf, ChangeCount, %d);
mps_dprint_field(sc, MPS_INFO, "NegotiatedLinkRate: %s (0x%x)\n",
mps_describe_table(mps_linkrate_names,
buf->NegotiatedLinkRate & 0xf), buf->NegotiatedLinkRate);
MPS_PRINTFIELD(sc, buf, PhyIdentifier, %d);
MPS_PRINTFIELD(sc, buf, AttachedPhyIdentifier, %d);
MPS_PRINTFIELD(sc, buf, DiscoveryInfo, 0x%x);
MPS_PRINTFIELD(sc, buf, AttachedPhyInfo, 0x%x);
mps_dprint_field(sc, MPS_INFO, "AttachedPhyInfo Reason: %s (0x%x)\n",
mps_describe_table(mps_phyinfo_reason_names,
buf->AttachedPhyInfo & 0xf), buf->AttachedPhyInfo);
MPS_PRINTFIELD(sc, buf, ZoneGroup, %d);
MPS_PRINTFIELD(sc, buf, SelfConfigStatus, 0x%x);
}
void
mps_print_iocfacts(struct mps_softc *sc, MPI2_IOC_FACTS_REPLY *facts)
{
MPS_PRINTFIELD_START(sc, "IOCFacts");
MPS_PRINTFIELD(sc, facts, MsgVersion, 0x%x);
MPS_PRINTFIELD(sc, facts, HeaderVersion, 0x%x);
MPS_PRINTFIELD(sc, facts, IOCNumber, %d);
MPS_PRINTFIELD(sc, facts, IOCExceptions, 0x%x);
MPS_PRINTFIELD(sc, facts, MaxChainDepth, %d);
mps_dprint_field(sc, MPS_INFO, "WhoInit: %s\n",
mps_describe_table(mps_whoinit_names, facts->WhoInit));
MPS_PRINTFIELD(sc, facts, NumberOfPorts, %d);
MPS_PRINTFIELD(sc, facts, RequestCredit, %d);
MPS_PRINTFIELD(sc, facts, ProductID, 0x%x);
mps_dprint_field(sc, MPS_INFO, "IOCCapabilities: %b\n",
facts->IOCCapabilities, "\20" "\3ScsiTaskFull" "\4DiagTrace"
"\5SnapBuf" "\6ExtBuf" "\7EEDP" "\10BiDirTarg" "\11Multicast"
"\14TransRetry" "\15IR" "\16EventReplay" "\17RaidAccel"
"\20MSIXIndex" "\21HostDisc");
mps_dprint_field(sc, MPS_INFO, "FWVersion= %d-%d-%d-%d\n",
facts->FWVersion.Struct.Major,
facts->FWVersion.Struct.Minor,
facts->FWVersion.Struct.Unit,
facts->FWVersion.Struct.Dev);
MPS_PRINTFIELD(sc, facts, IOCRequestFrameSize, %d);
MPS_PRINTFIELD(sc, facts, MaxInitiators, %d);
MPS_PRINTFIELD(sc, facts, MaxTargets, %d);
MPS_PRINTFIELD(sc, facts, MaxSasExpanders, %d);
MPS_PRINTFIELD(sc, facts, MaxEnclosures, %d);
mps_dprint_field(sc, MPS_INFO, "ProtocolFlags: %b\n",
facts->ProtocolFlags, "\20" "\1ScsiTarg" "\2ScsiInit");
MPS_PRINTFIELD(sc, facts, HighPriorityCredit, %d);
MPS_PRINTFIELD(sc, facts, MaxReplyDescriptorPostQueueDepth, %d);
MPS_PRINTFIELD(sc, facts, ReplyFrameSize, %d);
MPS_PRINTFIELD(sc, facts, MaxVolumes, %d);
MPS_PRINTFIELD(sc, facts, MaxDevHandle, %d);
MPS_PRINTFIELD(sc, facts, MaxPersistentEntries, %d);
}
void
mps_print_evt_sas(struct mps_softc *sc, MPI2_EVENT_NOTIFICATION_REPLY *event)
{
mps_print_event(sc, event);
switch(event->Event) {
case MPI2_EVENT_SAS_DISCOVERY:
{
MPI2_EVENT_DATA_SAS_DISCOVERY *data;
data = (MPI2_EVENT_DATA_SAS_DISCOVERY *)&event->EventData;
mps_dprint_field(sc, MPS_EVENT, "Flags: %b\n", data->Flags,
"\20" "\1InProgress" "\2DeviceChange");
mps_dprint_field(sc, MPS_EVENT, "ReasonCode: %s\n",
mps_describe_table(mps_sasdisc_reason, data->ReasonCode));
MPS_EVENTFIELD(sc, data, PhysicalPort, %d);
mps_dprint_field(sc, MPS_EVENT, "DiscoveryStatus: %b\n",
data->DiscoveryStatus, "\20"
"\1Loop" "\2UnaddressableDev" "\3DupSasAddr" "\5SmpTimeout"
"\6ExpRouteFull" "\7RouteIndexError" "\10SmpFailed"
"\11SmpCrcError" "\12SubSubLink" "\13TableTableLink"
"\14UnsupDevice" "\15TableSubLink" "\16MultiDomain"
"\17MultiSub" "\20MultiSubSub" "\34DownstreamInit"
"\35MaxPhys" "\36MaxTargs" "\37MaxExpanders"
"\40MaxEnclosures");
break;
}
case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
{
MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST *data;
MPI2_EVENT_SAS_TOPO_PHY_ENTRY *phy;
int i, phynum;
data = (MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST *)
&event->EventData;
MPS_EVENTFIELD(sc, data, EnclosureHandle, 0x%x);
MPS_EVENTFIELD(sc, data, ExpanderDevHandle, 0x%x);
MPS_EVENTFIELD(sc, data, NumPhys, %d);
MPS_EVENTFIELD(sc, data, NumEntries, %d);
MPS_EVENTFIELD(sc, data, StartPhyNum, %d);
mps_dprint_field(sc, MPS_EVENT, "ExpStatus: %s (0x%x)\n",
mps_describe_table(mps_sastopo_exp, data->ExpStatus),
data->ExpStatus);
MPS_EVENTFIELD(sc, data, PhysicalPort, %d);
for (i = 0; i < data->NumEntries; i++) {
phy = &data->PHY[i];
phynum = data->StartPhyNum + i;
mps_dprint_field(sc, MPS_EVENT,
"PHY[%d].AttachedDevHandle: 0x%04x\n", phynum,
phy->AttachedDevHandle);
mps_dprint_field(sc, MPS_EVENT,
"PHY[%d].LinkRate: %s (0x%x)\n", phynum,
mps_describe_table(mps_linkrate_names,
(phy->LinkRate >> 4) & 0xf), phy->LinkRate);
mps_dprint_field(sc,MPS_EVENT,"PHY[%d].PhyStatus: %s\n",
phynum, mps_describe_table(mps_phystatus_names,
phy->PhyStatus));
}
break;
}
case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
{
MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE *data;
data = (MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE *)
&event->EventData;
MPS_EVENTFIELD(sc, data, EnclosureHandle, 0x%x);
mps_dprint_field(sc, MPS_EVENT, "ReasonCode: %s\n",
mps_describe_table(mps_sastopo_exp, data->ReasonCode));
MPS_EVENTFIELD(sc, data, PhysicalPort, %d);
MPS_EVENTFIELD(sc, data, NumSlots, %d);
MPS_EVENTFIELD(sc, data, StartSlot, %d);
MPS_EVENTFIELD(sc, data, PhyBits, 0x%x);
break;
}
case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
{
MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *data;
data = (MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)
&event->EventData;
MPS_EVENTFIELD(sc, data, TaskTag, 0x%x);
mps_dprint_field(sc, MPS_EVENT, "ReasonCode: %s\n",
mps_describe_table(mps_sasdev_reason, data->ReasonCode));
MPS_EVENTFIELD(sc, data, ASC, 0x%x);
MPS_EVENTFIELD(sc, data, ASCQ, 0x%x);
MPS_EVENTFIELD(sc, data, DevHandle, 0x%x);
mps_dprint_field(sc, MPS_EVENT, "SASAddress: 0x%jx\n",
mps_to_u64(&data->SASAddress));
}
default:
break;
}
}
static int
mpssas_add_device(struct mps_softc *sc, u16 handle, u8 linkrate){
char devstring[80];
struct mpssas_softc *sassc;
struct mpssas_target *targ;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t config_page;
uint64_t sas_address, sata_sas_address;
uint64_t parent_sas_address = 0;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
u32 device_info, parent_devinfo = 0;
unsigned int id;
int ret;
int error = 0;
sassc = sc->sassc;
mpssas_startup_increment(sassc);
if ((mps_config_get_sas_device_pg0(sc, &mpi_reply, &config_page,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
kprintf("%s: error reading SAS device page0\n", __func__);
error = ENXIO;
goto out;
}
device_info = le32toh(config_page.DeviceInfo);
if (((device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0)
&& (config_page.ParentDevHandle != 0)) {
Mpi2ConfigReply_t tmp_mpi_reply;
Mpi2SasDevicePage0_t parent_config_page;
if ((mps_config_get_sas_device_pg0(sc, &tmp_mpi_reply,
&parent_config_page, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
le16toh(config_page.ParentDevHandle)))) {
kprintf("%s: error reading SAS device %#x page0\n",
__func__, le16toh(config_page.ParentDevHandle));
} else {
parent_sas_address = parent_config_page.SASAddress.High;
parent_sas_address = (parent_sas_address << 32) |
parent_config_page.SASAddress.Low;
parent_devinfo = le32toh(parent_config_page.DeviceInfo);
}
}
/* TODO Check proper endianess */
sas_address = config_page.SASAddress.High;
sas_address = (sas_address << 32) |
config_page.SASAddress.Low;
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE)
== MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) {
ret = mpssas_get_sas_address_for_sata_disk(sc,
&sata_sas_address, handle, device_info);
if (!ret)
id = mps_mapping_get_sas_id(sc,
sata_sas_address, handle);
else
id = mps_mapping_get_sas_id(sc,
sas_address, handle);
} else
id = mps_mapping_get_sas_id(sc, sas_address,
handle);
} else
id = mps_mapping_get_sas_id(sc, sas_address, handle);
if (id == MPS_MAP_BAD_ID) {
kprintf("failure at %s:%d/%s()! Could not get ID for device "
"with handle 0x%04x\n", __FILE__, __LINE__, __func__,
handle);
error = ENXIO;
goto out;
}
mps_vprintf(sc, "SAS Address from SAS device page0 = %jx\n",
sas_address);
targ = &sassc->targets[id];
targ->devinfo = device_info;
targ->devname = le32toh(config_page.DeviceName.High);
targ->devname = (targ->devname << 32) |
le32toh(config_page.DeviceName.Low);
targ->encl_handle = le16toh(config_page.EnclosureHandle);
targ->encl_slot = le16toh(config_page.Slot);
targ->handle = handle;
targ->parent_handle = le16toh(config_page.ParentDevHandle);
targ->sasaddr = mps_to_u64(&config_page.SASAddress);
targ->parent_sasaddr = le64toh(parent_sas_address);
targ->parent_devinfo = parent_devinfo;
targ->tid = id;
targ->linkrate = (linkrate>>4);
targ->flags = 0;
TAILQ_INIT(&targ->commands);
TAILQ_INIT(&targ->timedout_commands);
SLIST_INIT(&targ->luns);
mps_describe_devinfo(targ->devinfo, devstring, 80);
mps_vprintf(sc, "Found device <%s> <%s> <0x%04x> <%d/%d>\n", devstring,
mps_describe_table(mps_linkrate_names, targ->linkrate),
targ->handle, targ->encl_handle, targ->encl_slot);
if ((sassc->flags & MPSSAS_IN_STARTUP) == 0)
mpssas_rescan_target(sc, targ);
mps_vprintf(sc, "Target id 0x%x added\n", targ->tid);
out:
mpssas_startup_decrement(sassc);
return (error);
}
static int
mpssas_add_device(struct mps_softc *sc, u16 handle, u8 linkrate){
char devstring[80];
struct mpssas_softc *sassc;
struct mpssas_target *targ;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t config_page;
uint64_t sas_address;
uint64_t parent_sas_address = 0;
u32 device_info, parent_devinfo = 0;
unsigned int id;
int ret = 1, error = 0, i;
struct mpssas_lun *lun;
u8 is_SATA_SSD = 0;
struct mps_command *cm;
sassc = sc->sassc;
mpssas_startup_increment(sassc);
if ((mps_config_get_sas_device_pg0(sc, &mpi_reply, &config_page,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
printf("%s: error reading SAS device page0\n", __func__);
error = ENXIO;
goto out;
}
device_info = le32toh(config_page.DeviceInfo);
if (((device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0)
&& (le16toh(config_page.ParentDevHandle) != 0)) {
Mpi2ConfigReply_t tmp_mpi_reply;
Mpi2SasDevicePage0_t parent_config_page;
if ((mps_config_get_sas_device_pg0(sc, &tmp_mpi_reply,
&parent_config_page, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
le16toh(config_page.ParentDevHandle)))) {
printf("%s: error reading SAS device %#x page0\n",
__func__, le16toh(config_page.ParentDevHandle));
} else {
parent_sas_address = parent_config_page.SASAddress.High;
parent_sas_address = (parent_sas_address << 32) |
parent_config_page.SASAddress.Low;
parent_devinfo = le32toh(parent_config_page.DeviceInfo);
}
}
/* TODO Check proper endianess */
sas_address = config_page.SASAddress.High;
sas_address = (sas_address << 32) | config_page.SASAddress.Low;
/*
* Always get SATA Identify information because this is used to
* determine if Start/Stop Unit should be sent to the drive when the
* system is shutdown.
*/
if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) {
ret = mpssas_get_sas_address_for_sata_disk(sc, &sas_address,
handle, device_info, &is_SATA_SSD);
if (ret) {
mps_dprint(sc, MPS_INFO, "%s: failed to get disk type "
"(SSD or HDD) for SATA device with handle 0x%04x\n",
__func__, handle);
} else {
mps_dprint(sc, MPS_INFO, "SAS Address from SATA "
"device = %jx\n", sas_address);
}
}
id = mps_mapping_get_sas_id(sc, sas_address, handle);
if (id == MPS_MAP_BAD_ID) {
printf("failure at %s:%d/%s()! Could not get ID for device "
"with handle 0x%04x\n", __FILE__, __LINE__, __func__,
handle);
error = ENXIO;
goto out;
}
if (mpssas_check_id(sassc, id) != 0) {
device_printf(sc->mps_dev, "Excluding target id %d\n", id);
error = ENXIO;
goto out;
}
mps_dprint(sc, MPS_MAPPING, "SAS Address from SAS device page0 = %jx\n",
sas_address);
targ = &sassc->targets[id];
targ->devinfo = device_info;
targ->devname = le32toh(config_page.DeviceName.High);
targ->devname = (targ->devname << 32) |
le32toh(config_page.DeviceName.Low);
targ->encl_handle = le16toh(config_page.EnclosureHandle);
targ->encl_slot = le16toh(config_page.Slot);
targ->handle = handle;
targ->parent_handle = le16toh(config_page.ParentDevHandle);
targ->sasaddr = mps_to_u64(&config_page.SASAddress);
targ->parent_sasaddr = le64toh(parent_sas_address);
targ->parent_devinfo = parent_devinfo;
targ->tid = id;
targ->linkrate = (linkrate>>4);
targ->flags = 0;
if (is_SATA_SSD) {
targ->flags = MPS_TARGET_IS_SATA_SSD;
}
TAILQ_INIT(&targ->commands);
TAILQ_INIT(&targ->timedout_commands);
while(!SLIST_EMPTY(&targ->luns)) {
lun = SLIST_FIRST(&targ->luns);
SLIST_REMOVE_HEAD(&targ->luns, lun_link);
free(lun, M_MPT2);
}
SLIST_INIT(&targ->luns);
mps_describe_devinfo(targ->devinfo, devstring, 80);
mps_dprint(sc, MPS_MAPPING, "Found device <%s> <%s> <0x%04x> <%d/%d>\n",
devstring, mps_describe_table(mps_linkrate_names, targ->linkrate),
targ->handle, targ->encl_handle, targ->encl_slot);
#if __FreeBSD_version < 1000039
if ((sassc->flags & MPSSAS_IN_STARTUP) == 0)
#endif
mpssas_rescan_target(sc, targ);
mps_dprint(sc, MPS_MAPPING, "Target id 0x%x added\n", targ->tid);
/*
* Check all commands to see if the SATA_ID_TIMEOUT flag has been set.
* If so, send a Target Reset TM to the target that was just created.
* An Abort Task TM should be used instead of a Target Reset, but that
* would be much more difficult because targets have not been fully
* discovered yet, and LUN's haven't been setup. So, just reset the
* target instead of the LUN.
*/
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
if (cm->cm_flags & MPS_CM_FLAGS_SATA_ID_TIMEOUT) {
targ->timeouts++;
cm->cm_state = MPS_CM_STATE_TIMEDOUT;
if ((targ->tm = mpssas_alloc_tm(sc)) != NULL) {
mps_dprint(sc, MPS_INFO, "%s: sending Target "
"Reset for stuck SATA identify command "
"(cm = %p)\n", __func__, cm);
targ->tm->cm_targ = targ;
mpssas_send_reset(sc, targ->tm,
MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET);
} else {
mps_dprint(sc, MPS_ERROR, "Failed to allocate "
"tm for Target Reset after SATA ID command "
"timed out (cm %p)\n", cm);
}
/*
* No need to check for more since the target is
* already being reset.
*/
break;
}
}
out:
/*
* Free the commands that may not have been freed from the SATA ID call
*/
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
if (cm->cm_flags & MPS_CM_FLAGS_SATA_ID_TIMEOUT) {
mps_free_command(sc, cm);
}
}
mpssas_startup_decrement(sassc);
return (error);
}
