static kal_uint32 charging_set_cv_voltage(void *data)
{
kal_uint32 status = STATUS_OK;
kal_uint16 register_value;
static kal_int16 pre_register_value = -1;
register_value = charging_parameter_to_value(VBAT_CV_VTH, GETARRAYNUM(VBAT_CV_VTH) ,*(kal_uint32 *)(data));
#if 0
//bq24261_set_vbreg(0x14);
bq24261_set_vbreg(register_value);
#else
//PCB workaround
if(mt6325_upmu_get_swcid() == PMIC6325_E1_CID_CODE)
{
#if defined(CV_E1_INTERNAL)
bq24261_set_vbreg(0x19);
#else
bq24261_set_vbreg(0xF);
#endif
battery_xlog_printk(BAT_LOG_CRTI,"[charging_set_cv_voltage] set low CV by 6325 E1\n");
}
else
{
if(is_mt6311_exist())
{
if(mt6311_get_chip_id()==PMIC6311_E1_CID_CODE)
{
#if defined(CV_E1_INTERNAL)
bq24261_set_vbreg(0x19);
#else
bq24261_set_vbreg(0xF);
#endif
battery_xlog_printk(BAT_LOG_CRTI,"[charging_set_cv_voltage] set low CV by 6311 E1\n");
}
else
{
if (pre_register_value != register_value) {
battery_xlog_printk(BAT_LOG_CRTI,"[charging_set_cv_voltage] disable charging\n");
bq24261_set_dis_ce(1);
}
bq24261_set_vbreg(register_value);
if (pre_register_value != register_value)
bq24261_set_dis_ce(0);
pre_register_value = register_value;
}
}
else
{
bq24261_set_vbreg(register_value);
}
}
#endif
return status;
}
static kal_uint32 charging_set_cv_voltage(void *data)
{
kal_uint32 status = STATUS_OK;
kal_uint16 register_value;
kal_uint32 cv_value = *(kal_uint32 *)(data);
kal_uint32 array_size;
kal_uint32 set_chr_cv;
array_size = GETARRAYNUM(VBAT_CV_VTH);
set_chr_cv = bmt_find_closest_level(VBAT_CV_VTH, array_size, cv_value);
register_value = charging_parameter_to_value(VBAT_CV_VTH, GETARRAYNUM(VBAT_CV_VTH), set_chr_cv);
#if 0
ncp1854_set_ctrl_vbat(register_value);
#else
//PCB workaround
if(mt6325_upmu_get_swcid() == PMIC6325_E1_CID_CODE)
{
ncp1854_set_ctrl_vbat(0x14); //3.8v
battery_xlog_printk(BAT_LOG_CRTI,"[charging_set_cv_voltage] set low CV by 6325 E1\n");
}
else
{
if(is_mt6311_exist())
{
if(mt6311_get_chip_id()==PMIC6311_E1_CID_CODE)
{
ncp1854_set_ctrl_vbat(0x14); //3.8v
battery_xlog_printk(BAT_LOG_CRTI,"[charging_set_cv_voltage] set low CV by 6311 E1\n");
}
else
{
ncp1854_set_ctrl_vbat(register_value);
}
}
else
{
ncp1854_set_ctrl_vbat(register_value);
}
}
#endif
return status;
}
static kal_uint32 charging_set_cv_voltage(void *data)
{
kal_uint32 status = STATUS_OK;
kal_uint32 array_size;
kal_uint32 set_cv_voltage;
kal_uint16 register_value;
kal_uint32 cv_value = *(kal_uint32 *)(data);
static kal_int16 pre_register_value = -1;
#if defined(HIGH_BATTERY_VOLTAGE_SUPPORT)
//highest of voltage will be 4.3V, because powerpath limitation
if(cv_value >= BATTERY_VOLT_04_300000_V)
cv_value = 4304000;
#endif
//use nearest value
if(BATTERY_VOLT_04_200000_V == cv_value)
cv_value = 4208000;
array_size = GETARRAYNUM(VBAT_CV_VTH);
set_cv_voltage = bmt_find_closest_level(VBAT_CV_VTH, array_size, cv_value);
register_value = charging_parameter_to_value(VBAT_CV_VTH, array_size, set_cv_voltage);
//PCB workaround
if(mt6325_upmu_get_swcid() == PMIC6325_E1_CID_CODE)
{
#if defined(CV_E1_INTERNAL)
bq24196_set_vreg(0x1F);//4.0v
#else
bq24196_set_vreg(0x14);//3.8v
#endif
battery_log(BAT_LOG_CRTI, "[charging_set_cv_voltage] set low CV by 6325 E1\n");
}
else
{
if(is_mt6311_exist())
{
if(mt6311_get_chip_id()==PMIC6311_E1_CID_CODE)
{
#if defined(CV_E1_INTERNAL)
bq24196_set_vreg(0x1F);//4.0v
#else
bq24196_set_vreg(0x14);//3.8v
#endif
battery_log(BAT_LOG_CRTI, "[charging_set_cv_voltage] set low CV by 6311 E1\n");
}
else
{
if (pre_register_value != register_value) {
battery_log(BAT_LOG_CRTI, "[charging_set_cv_voltage] disable charging\n");
bq24196_set_chg_config(0);
}
bq24196_set_vreg(register_value);
if (pre_register_value != register_value)
bq24196_set_chg_config(1);
pre_register_value = register_value;
}
}
else
{
bq24196_set_vreg(register_value);
}
}
return status;
}
