static int mv88e6352_setup_global(struct dsa_switch *ds)
{
u32 upstream_port = dsa_upstream_port(ds);
int ret;
u32 reg;
ret = mv88e6xxx_setup_global(ds);
if (ret)
return ret;
/* Discard packets with excessive collisions,
* mask all interrupt sources, enable PPU (bit 14, undocumented).
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_DISCARD_EXCESS);
/* Configure the upstream port, and configure the upstream
* port as the port to which ingress and egress monitor frames
* are to be sent.
*/
reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
/* Disable remote management for now, and set the switch's
* DSA device number.
*/
REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
return 0;
}
static int mv88e6131_setup_global(struct dsa_switch *ds)
{
u32 upstream_port = dsa_upstream_port(ds);
int ret;
u32 reg;
ret = mv88e6xxx_setup_global(ds);
if (ret)
return ret;
/* Enable the PHY polling unit, don't discard packets with
* excessive collisions, use a weighted fair queueing scheme
* to arbitrate between packet queues, set the maximum frame
* size to 1632, and mask all interrupt sources.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_MAX_FRAME_1632);
/* Set the VLAN ethertype to 0x8100. */
REG_WRITE(REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100);
/* Disable ARP mirroring, and configure the upstream port as
* the port to which ingress and egress monitor frames are to
* be sent.
*/
reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
GLOBAL_MONITOR_CONTROL_ARP_DISABLED;
REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
/* Disable cascade port functionality unless this device
* is used in a cascade configuration, and set the switch's
* DSA device number.
*/
if (ds->dst->pd->nr_chips > 1)
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2,
GLOBAL_CONTROL_2_MULTIPLE_CASCADE |
(ds->index & 0x1f));
else
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2,
GLOBAL_CONTROL_2_NO_CASCADE |
(ds->index & 0x1f));
/* Force the priority of IGMP/MLD snoop frames and ARP frames
* to the highest setting.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE,
GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP |
7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT |
GLOBAL2_PRIO_OVERRIDE_FORCE_ARP |
7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT);
return 0;
}