static int
ethif_probe(struct device *dev)
{
u_long base_addr = dev->base_addr;
if ((base_addr == 0xffe0) || (base_addr == 1))
return 1; /* ENXIO */
if (1
/* All PCI probes are safe, and thus should be first. */
#ifdef CONFIG_DE4X5 /* DEC DE425, DE434, DE435 adapters */
&& de4x5_probe(dev)
#endif
#ifdef CONFIG_DGRS
&& dgrs_probe(dev)
#endif
#ifdef CONFIG_EEXPRESS_PRO100B /* Intel EtherExpress Pro100B */
&& eepro100_probe(dev)
#endif
#ifdef CONFIG_EPIC
&& epic100_probe(dev)
#endif
#if defined(CONFIG_HP100)
&& hp100_probe(dev)
#endif
#if defined(CONFIG_NE2K_PCI)
&& ne2k_pci_probe(dev)
#endif
#ifdef CONFIG_PCNET32
&& pcnet32_probe(dev)
#endif
#ifdef CONFIG_RTL8139
&& rtl8139_probe(dev)
#endif
#if defined(CONFIG_VIA_RHINE)
&& via_rhine_probe(dev)
#endif
#if defined(CONFIG_VORTEX)
&& tc59x_probe(dev)
#endif
#if defined(CONFIG_DEC_ELCP)
&& tulip_probe(dev)
#endif
#ifdef CONFIG_YELLOWFIN
&& yellowfin_probe(dev)
#endif
/* Next mostly-safe EISA-only drivers. */
#ifdef CONFIG_AC3200 /* Ansel Communications EISA 3200. */
&& ac3200_probe(dev)
#endif
#if defined(CONFIG_ULTRA32)
&& ultra32_probe(dev)
#endif
/* Third, sensitive ISA boards. */
#ifdef CONFIG_AT1700
&& at1700_probe(dev)
#endif
#if defined(CONFIG_ULTRA)
&& ultra_probe(dev)
#endif
#if defined(CONFIG_SMC9194)
&& smc_init(dev)
#endif
#if defined(CONFIG_WD80x3)
&& wd_probe(dev)
#endif
#if defined(CONFIG_EL2) /* 3c503 */
&& el2_probe(dev)
#endif
#if defined(CONFIG_HPLAN)
&& hp_probe(dev)
#endif
#if defined(CONFIG_HPLAN_PLUS)
&& hp_plus_probe(dev)
#endif
#if defined(CONFIG_SEEQ8005)
&& seeq8005_probe(dev)
#endif
#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
&& e2100_probe(dev)
#endif
#if defined(CONFIG_NE2000)
&& ne_probe(dev)
#endif
#ifdef CONFIG_AT1500
&& at1500_probe(dev)
#endif
#ifdef CONFIG_FMV18X /* Fujitsu FMV-181/182 */
&& fmv18x_probe(dev)
#endif
#ifdef CONFIG_ETH16I
&& eth16i_probe(dev) /* ICL EtherTeam 16i/32 */
#endif
#ifdef CONFIG_EL3 /* 3c509 */
&& el3_probe(dev)
#endif
#ifdef CONFIG_3C515 /* 3c515 */
&& tc515_probe(dev)
#endif
#ifdef CONFIG_ZNET /* Zenith Z-Note and some IBM Thinkpads. */
&& znet_probe(dev)
#endif
#ifdef CONFIG_EEXPRESS /* Intel EtherExpress */
&& express_probe(dev)
#endif
#ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */
&& eepro_probe(dev)
#endif
#ifdef CONFIG_DEPCA /* DEC DEPCA */
&& depca_probe(dev)
#endif
#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */
&& ewrk3_probe(dev)
#endif
#ifdef CONFIG_APRICOT /* Apricot I82596 */
&& apricot_probe(dev)
#endif
#ifdef CONFIG_EL1 /* 3c501 */
&& el1_probe(dev)
#endif
#if defined(CONFIG_WAVELAN) /* WaveLAN */
&& wavelan_probe(dev)
#endif /* defined(CONFIG_WAVELAN) */
#ifdef CONFIG_EL16 /* 3c507 */
&& el16_probe(dev)
#endif
#ifdef CONFIG_ELPLUS /* 3c505 */
&& elplus_probe(dev)
#endif
#ifdef CONFIG_DE600 /* D-Link DE-600 adapter */
&& de600_probe(dev)
#endif
#ifdef CONFIG_DE620 /* D-Link DE-620 adapter */
&& de620_probe(dev)
#endif
#if defined(CONFIG_SK_G16)
&& SK_init(dev)
#endif
#ifdef CONFIG_NI52
&& ni52_probe(dev)
#endif
#ifdef CONFIG_NI65
&& ni65_probe(dev)
#endif
#ifdef CONFIG_LANCE /* ISA LANCE boards */
&& lance_probe(dev)
#endif
#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
&& atarilance_probe(dev)
#endif
#ifdef CONFIG_A2065 /* Commodore/Ameristar A2065 Ethernet Board */
&& a2065_probe(dev)
#endif
#ifdef CONFIG_APNE /* Amiga 1200 PCMCIA NEx000 Ethernet Board */
&& apne_probe(dev)
#endif
#ifdef CONFIG_ARIADNE /* Village Tronic Ariadne Ethernet Board */
&& ariadne_probe(dev)
#endif
#ifdef CONFIG_ARIADNE2 /* Village Tronic Ariadne II Ethernet Board */
&& ariadne2_probe(dev)
#endif
#ifdef CONFIG_HYDRA /* Hydra Systems Amiganet Ethernet board */
&& hydra_probe(dev)
#endif
#ifdef CONFIG_ATARI_BIONET /* Atari Bionet Ethernet board */
&& bionet_probe(dev)
#endif
#ifdef CONFIG_ATARI_PAMSNET /* Atari PAMsNet Ethernet board */
&& pamsnet_probe(dev)
#endif
#ifdef CONFIG_SUNLANCE
&& sparc_lance_probe(dev)
#endif
#ifdef CONFIG_TLAN
&& tlan_probe(dev)
#endif
#ifdef CONFIG_LANCE
&& lance_probe(dev)
#endif
&& 1 ) {
return 1; /* -ENODEV or -EAGAIN would be more accurate. */
}
return 0;
}
/*
** Name: void do_init(message *mp)
** Function: Checks for hardware presence.
** Provides initialization of hardware and data structures
*/
static void do_init(message * mp)
{
int port;
dpeth_t *dep;
dp_conf_t *dcp;
message reply_mess;
port = mp->DL_PORT;
if (port >= 0 && port < DE_PORT_NR) {
dep = &de_table[port];
dcp = &dp_conf[port];
strcpy(dep->de_name, DevName);
dep->de_name[4] = '0' + port;
if (dep->de_mode == DEM_DISABLED) {
update_conf(dep, dcp); /* First time thru */
if (dep->de_mode == DEM_ENABLED &&
!el1_probe(dep) && /* Probe for 3c501 */
!wdeth_probe(dep) && /* Probe for WD80x3 */
!ne_probe(dep) && /* Probe for NEx000 */
!el2_probe(dep) && /* Probe for 3c503 */
!el3_probe(dep)) { /* Probe for 3c509 */
printf("%s: warning no ethernet card found at 0x%04X\n",
dep->de_name, dep->de_base_port);
dep->de_mode = DEM_DISABLED;
}
}
/* 'de_mode' may change if probe routines fail, test again */
switch (dep->de_mode) {
case DEM_DISABLED:
/* Device is configured OFF or hardware probe failed */
port = ENXIO;
break;
case DEM_ENABLED:
/* Device is present and probed */
if (dep->de_flags == DEF_EMPTY) {
/* These actions only the first time */
do_first_init(dep, dcp);
dep->de_flags |= DEF_ENABLED;
}
dep->de_flags &= NOT(DEF_PROMISC | DEF_MULTI | DEF_BROAD);
if (mp->DL_MODE & DL_PROMISC_REQ)
dep->de_flags |= DEF_PROMISC | DEF_MULTI | DEF_BROAD;
if (mp->DL_MODE & DL_MULTI_REQ) dep->de_flags |= DEF_MULTI;
if (mp->DL_MODE & DL_BROAD_REQ) dep->de_flags |= DEF_BROAD;
(*dep->de_flagsf) (dep);
dep->de_client = mp->m_source;
break;
case DEM_SINK:
/* Device not present (sink mode) */
memset(dep->de_address.ea_addr, 0, sizeof(ether_addr_t));
dp_confaddr(dep); /* Station address from env. */
break;
default: break;
}
*(ether_addr_t *) reply_mess.m3_ca1 = dep->de_address;
} else /* Port number is out of range */
port = ENXIO;
reply_mess.m_type = DL_INIT_REPLY;
reply_mess.m3_i1 = port;
reply_mess.m3_i2 = DE_PORT_NR;
DEBUG(printf("\t reply %d\n", reply_mess.m_type));
if (send(mp->m_source, &reply_mess) != OK) /* Can't send */
panic(dep->de_name, SendErrMsg, mp->m_source);
return;
}
/*
** Name: void do_init(message *mp)
** Function: Checks for hardware presence.
** Provides initialization of hardware and data structures
*/
static void do_init(const message * mp)
{
dpeth_t *dep;
dp_conf_t *dcp;
message reply_mess;
int r, confnr;
dep = &de_state;
/* Pick a default configuration for this instance. */
confnr = MIN(de_instance, DP_CONF_NR-1);
dcp = &dp_conf[confnr];
strcpy(dep->de_name, DevName);
dep->de_name[4] = '0' + de_instance;
if (dep->de_mode == DEM_DISABLED) {
update_conf(dep, dcp); /* First time thru */
if (dep->de_mode == DEM_ENABLED &&
!el1_probe(dep) && /* Probe for 3c501 */
!wdeth_probe(dep) && /* Probe for WD80x3 */
!ne_probe(dep) && /* Probe for NEx000 */
!el2_probe(dep) && /* Probe for 3c503 */
!el3_probe(dep)) { /* Probe for 3c509 */
printf("%s: warning no ethernet card found at 0x%04X\n",
dep->de_name, dep->de_base_port);
dep->de_mode = DEM_DISABLED;
}
}
r = OK;
/* 'de_mode' may change if probe routines fail, test again */
switch (dep->de_mode) {
case DEM_DISABLED:
/* Device is configured OFF or hardware probe failed */
r = ENXIO;
break;
case DEM_ENABLED:
/* Device is present and probed */
if (dep->de_flags == DEF_EMPTY) {
/* These actions only the first time */
do_first_init(dep, dcp);
dep->de_flags |= DEF_ENABLED;
}
dep->de_flags &= NOT(DEF_PROMISC | DEF_MULTI | DEF_BROAD);
if (mp->DL_MODE & DL_PROMISC_REQ)
dep->de_flags |= DEF_PROMISC | DEF_MULTI | DEF_BROAD;
if (mp->DL_MODE & DL_MULTI_REQ) dep->de_flags |= DEF_MULTI;
if (mp->DL_MODE & DL_BROAD_REQ) dep->de_flags |= DEF_BROAD;
(*dep->de_flagsf) (dep);
break;
case DEM_SINK:
/* Device not present (sink mode) */
memset(dep->de_address.ea_addr, 0, sizeof(ether_addr_t));
dp_confaddr(dep); /* Station address from env. */
break;
default: break;
}
reply_mess.m_type = DL_CONF_REPLY;
reply_mess.DL_STAT = r;
if (r == OK)
*(ether_addr_t *) reply_mess.DL_HWADDR = dep->de_address;
DEBUG(printf("\t reply %d\n", reply_mess.m_type));
if (send(mp->m_source, &reply_mess) != OK) /* Can't send */
panic(SendErrMsg, mp->m_source);
return;
}
static int
ethif_probe(struct device *dev)
{
u_long base_addr = dev->base_addr;
if ((base_addr == 0xffe0) || (base_addr == 1))
return 1; /* ENXIO */
if (1
#if defined(CONFIG_OSFMACH3)
&& osfmach3_ethif_probe(dev)
#endif
#ifdef CONFIG_DGRS
&& dgrs_probe(dev)
#endif
#if defined(CONFIG_VORTEX)
&& tc59x_probe(dev)
#endif
#if defined(CONFIG_SEEQ8005)
&& seeq8005_probe(dev)
#endif
#if defined(CONFIG_DEC_ELCP)
&& tulip_probe(dev)
#endif
#if defined(CONFIG_HP100)
&& hp100_probe(dev)
#endif
#if defined(CONFIG_ULTRA)
&& ultra_probe(dev)
#endif
#if defined(CONFIG_ULTRA32)
&& ultra32_probe(dev)
#endif
#if defined(CONFIG_SMC9194)
&& smc_init(dev)
#endif
#if defined(CONFIG_WD80x3) || defined(WD80x3)
&& wd_probe(dev)
#endif
#if defined(CONFIG_EL2) || defined(EL2) /* 3c503 */
&& el2_probe(dev)
#endif
#if defined(CONFIG_HPLAN) || defined(HPLAN)
&& hp_probe(dev)
#endif
#if defined(CONFIG_HPLAN_PLUS)
&& hp_plus_probe(dev)
#endif
#ifdef CONFIG_AC3200 /* Ansel Communications EISA 3200. */
&& ac3200_probe(dev)
#endif
#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
&& e2100_probe(dev)
#endif
#if defined(CONFIG_NE2000) || defined(NE2000)
&& ne_probe(dev)
#endif
#ifdef CONFIG_AT1500
&& at1500_probe(dev)
#endif
#ifdef CONFIG_AT1700
&& at1700_probe(dev)
#endif
#ifdef CONFIG_FMV18X /* Fujitsu FMV-181/182 */
&& fmv18x_probe(dev)
#endif
#ifdef CONFIG_ETH16I
&& eth16i_probe(dev) /* ICL EtherTeam 16i/32 */
#endif
#ifdef CONFIG_EL3 /* 3c509 */
&& el3_probe(dev)
#endif
#ifdef CONFIG_ZNET /* Zenith Z-Note and some IBM Thinkpads. */
&& znet_probe(dev)
#endif
#ifdef CONFIG_EEXPRESS /* Intel EtherExpress */
&& express_probe(dev)
#endif
#ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */
&& eepro_probe(dev)
#endif
#ifdef CONFIG_EEXPRESS_PRO100B /* Intel EtherExpress Pro100B */
&& eepro100_probe(dev)
#endif
#ifdef CONFIG_DEPCA /* DEC DEPCA */
&& depca_probe(dev)
#endif
#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */
&& ewrk3_probe(dev)
#endif
#ifdef CONFIG_DE4X5 /* DEC DE425, DE434, DE435 adapters */
&& de4x5_probe(dev)
#endif
#ifdef CONFIG_APRICOT /* Apricot I82596 */
&& apricot_probe(dev)
#endif
#ifdef CONFIG_EL1 /* 3c501 */
&& el1_probe(dev)
#endif
#if defined(CONFIG_WAVELAN) /* WaveLAN */
&& wavelan_probe(dev)
#endif /* defined(CONFIG_WAVELAN) */
#ifdef CONFIG_EL16 /* 3c507 */
&& el16_probe(dev)
#endif
#ifdef CONFIG_ELPLUS /* 3c505 */
&& elplus_probe(dev)
#endif
#ifdef CONFIG_DE600 /* D-Link DE-600 adapter */
&& de600_probe(dev)
#endif
#ifdef CONFIG_DE620 /* D-Link DE-620 adapter */
&& de620_probe(dev)
#endif
#if defined(CONFIG_SK_G16)
&& SK_init(dev)
#endif
#ifdef CONFIG_NI52
&& ni52_probe(dev)
#endif
#ifdef CONFIG_NI65
&& ni65_probe(dev)
#endif
#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
&& atarilance_probe(dev)
#endif
#ifdef CONFIG_A2065 /* Commodore/Ameristar A2065 Ethernet Board */
&& a2065_probe(dev)
#endif
#ifdef CONFIG_ARIADNE /* Village Tronic Ariadne Ethernet Board */
&& ariadne_probe(dev)
#endif
#ifdef CONFIG_HYDRA /* Hydra Systems Amiganet Ethernet board */
&& hydra_probe(dev)
#endif
#ifdef CONFIG_SUNLANCE
&& sparc_lance_probe(dev)
#endif
&& 1 ) {
return 1; /* -ENODEV or -EAGAIN would be more accurate. */
}
return 0;
}
