/* Sniff for LAPs. If a piconet is provided, use the given LAP to
* search for UAP.
*/
static void cb_br_rx(void* args, usb_pkt_rx *rx, int bank)
{
btbb_packet *pkt = NULL;
btbb_piconet *pn = (btbb_piconet *)args;
char syms[BANK_LEN * NUM_BANKS];
int i;
int8_t signal_level;
int8_t noise_level;
int8_t snr;
int offset;
uint32_t clkn;
uint32_t lap = LAP_ANY;
uint8_t uap = UAP_ANY;
/* Sanity check */
if (rx->channel > (NUM_BREDR_CHANNELS-1))
goto out;
/* Copy packet (for dump) */
memcpy(&usb_packets[bank], rx, sizeof(usb_pkt_rx));
unpack_symbols(rx->data, br_symbols[bank]);
/* Do analysis based on oldest packet */
rx = &usb_packets[ (bank+1) % NUM_BANKS ];
uint64_t nowns = now_ns_from_clk100ns( rx );
determine_signal_and_noise( rx, &signal_level, &noise_level );
snr = signal_level - noise_level;
/* WC4: use vm circbuf if target allows. This gets rid of this
* wrapped copy step. */
/* Copy 2 oldest banks of symbols for analysis. Packet may
* cross a bank boundary. */
for (i = 0; i < 2; i++)
memcpy(syms + i * BANK_LEN,
br_symbols[(i + 1 + bank) % NUM_BANKS],
BANK_LEN);
/* Look for packets with specified LAP, if given. Otherwise
* search for any packet. Also determine if UAP is known. */
if (pn) {
lap = btbb_piconet_get_flag(pn, BTBB_LAP_VALID) ? btbb_piconet_get_lap(pn) : LAP_ANY;
uap = btbb_piconet_get_flag(pn, BTBB_UAP_VALID) ? btbb_piconet_get_uap(pn) : UAP_ANY;
}
/* Pass packet-pointer-pointer so that
* packet can be created in libbtbb. */
offset = btbb_find_ac(syms, BANK_LEN, lap, max_ac_errors, &pkt);
if (offset < 0)
goto out;
/* Copy out remaining banks of symbols for full analysis. */
for (i = 1; i < NUM_BANKS; i++)
memcpy(syms + i * BANK_LEN,
br_symbols[(i + 1 + bank) % NUM_BANKS],
BANK_LEN);
/* Once offset is known for a valid packet, copy in symbols
* and other rx data. CLKN here is the 312.5us CLK27-0. The
* btbb library can shift it be CLK1 if needed. */
clkn = (rx->clkn_high << 20) + (le32toh(rx->clk100ns) + offset + 1562) / 3125;
btbb_packet_set_data(pkt, syms + offset, NUM_BANKS * BANK_LEN - offset,
rx->channel, clkn);
/* Dump to PCAP/PCAPNG if specified */
#if defined(USE_PCAP)
if (h_pcap_bredr) {
btbb_pcap_append_packet(h_pcap_bredr, nowns,
signal_level, noise_level,
lap, uap, pkt);
}
#endif
if (h_pcapng_bredr) {
btbb_pcapng_append_packet(h_pcapng_bredr, nowns,
signal_level, noise_level,
lap, uap, pkt);
}
/* When reading from file, caller will read
* systime before calling this routine, so do
* not overwrite. Otherwise, get current time. */
if (infile == NULL)
systime = time(NULL);
/* If dumpfile is specified, write out all banks to the
* file. There could be duplicate data in the dump if more
* than one LAP is found within the span of NUM_BANKS. */
if (dumpfile) {
for(i = 0; i < NUM_BANKS; i++) {
uint32_t systime_be = htobe32(systime);
if (fwrite(&systime_be,
sizeof(systime_be), 1,
dumpfile)
!= 1) {;}
if (fwrite(&usb_packets[(i + 1 + bank) % NUM_BANKS],
sizeof(usb_pkt_rx), 1, dumpfile)
!= 1) {;}
}
}
printf("systime=%u ch=%2d LAP=%06x err=%u clk100ns=%u clk1=%u s=%d n=%d snr=%d\n",
(int)systime,
btbb_packet_get_channel(pkt),
btbb_packet_get_lap(pkt),
btbb_packet_get_ac_errors(pkt),
rx->clk100ns,
btbb_packet_get_clkn(pkt),
signal_level,
noise_level,
snr);
i = btbb_process_packet(pkt, pn);
if(i < 0) {
follow_pn = pn;
stop_ubertooth = 1;
}
out:
if (pkt)
btbb_packet_unref(pkt);
}
/*
* Sniff Bluetooth Low Energy packets.
*/
void cb_btle(void* args, usb_pkt_rx *rx, int bank)
{
lell_packet * pkt;
btle_options * opts = (btle_options *) args;
int i;
u32 access_address = 0;
static u32 prev_ts = 0;
uint32_t refAA;
int8_t sig, noise;
UNUSED(bank);
uint64_t nowns = now_ns_from_clk100ns( rx );
/* Sanity check */
if (rx->channel > (NUM_BREDR_CHANNELS-1))
return;
if (infile == NULL)
systime = time(NULL);
/* Dump to sumpfile if specified */
if (dumpfile) {
uint32_t systime_be = htobe32(systime);
if (fwrite(&systime_be, sizeof(systime_be), 1, dumpfile) != 1) {;}
if (fwrite(rx, sizeof(usb_pkt_rx), 1, dumpfile) != 1) {;}
}
lell_allocate_and_decode(rx->data, rx->channel + 2402, rx->clk100ns, &pkt);
/* do nothing further if filtered due to bad AA */
if (opts &&
(opts->allowed_access_address_errors <
lell_get_access_address_offenses(pkt))) {
lell_packet_unref(pkt);
return;
}
/* Dump to PCAP/PCAPNG if specified */
refAA = lell_packet_is_data(pkt) ? 0 : 0x8e89bed6;
determine_signal_and_noise( rx, &sig, &noise );
#if defined(USE_PCAP)
if (h_pcap_le) {
/* only one of these two will succeed, depending on
* whether PCAP was opened with DLT_PPI or not */
lell_pcap_append_packet(h_pcap_le, nowns,
sig, noise,
refAA, pkt);
lell_pcap_append_ppi_packet(h_pcap_le, nowns,
rx->clkn_high,
rx->rssi_min, rx->rssi_max,
rx->rssi_avg, rx->rssi_count,
pkt);
}
#endif
if (h_pcapng_le) {
lell_pcapng_append_packet(h_pcapng_le, nowns,
sig, noise,
refAA, pkt);
}
u32 ts_diff = rx->clk100ns - prev_ts;
prev_ts = rx->clk100ns;
printf("systime=%u freq=%d addr=%08x delta_t=%.03f ms\n",
systime, rx->channel + 2402, lell_get_access_address(pkt),
ts_diff / 10000.0);
int len = (rx->data[5] & 0x3f) + 6 + 3;
if (len > 50) len = 50;
for (i = 4; i < len; ++i)
printf("%02x ", rx->data[i]);
printf("\n");
lell_print(pkt);
printf("\n");
lell_packet_unref(pkt);
fflush(stdout);
}
/*
* Sniff Bluetooth Low Energy packets.
*/
void cb_btle(ubertooth_t* ut, void* args)
{
lell_packet* pkt;
btle_options* opts = (btle_options*) args;
int i;
usb_pkt_rx* rx = ringbuffer_top_usb(ut->packets);
// u32 access_address = 0; // Build warning
static u32 prev_ts = 0;
uint32_t refAA;
int8_t sig, noise;
// display LE promiscuous mode state changes
if (rx->pkt_type == LE_PROMISC) {
u8 state = rx->data[0];
void *val = &rx->data[1];
printf("--------------------\n");
printf("LE Promisc - ");
switch (state) {
case 0:
printf("Access Address: %08x\n", *(uint32_t *)val);
break;
case 1:
printf("CRC Init: %06x\n", *(uint32_t *)val);
break;
case 2:
printf("Hop interval: %g ms\n", *(uint16_t *)val * 1.25);
break;
case 3:
printf("Hop increment: %u\n", *(uint8_t *)val);
break;
default:
printf("Unknown %u\n", state);
break;
};
printf("\n");
return;
}
uint64_t nowns = now_ns_from_clk100ns( ut, rx );
/* Sanity check */
if (rx->channel > (NUM_BREDR_CHANNELS-1))
return;
if (infile == NULL)
systime = time(NULL);
/* Dump to sumpfile if specified */
if (dumpfile) {
uint32_t systime_be = htobe32(systime);
fwrite(&systime_be, sizeof(systime_be), 1, dumpfile);
fwrite(rx, sizeof(usb_pkt_rx), 1, dumpfile);
fflush(dumpfile);
}
lell_allocate_and_decode(rx->data, rx->channel + 2402, rx->clk100ns, &pkt);
/* do nothing further if filtered due to bad AA */
if (opts &&
(opts->allowed_access_address_errors <
lell_get_access_address_offenses(pkt))) {
lell_packet_unref(pkt);
return;
}
/* Dump to PCAP/PCAPNG if specified */
refAA = lell_packet_is_data(pkt) ? 0 : 0x8e89bed6;
determine_signal_and_noise( rx, &sig, &noise );
#ifdef ENABLE_PCAP
if (ut->h_pcap_le) {
/* only one of these two will succeed, depending on
* whether PCAP was opened with DLT_PPI or not */
lell_pcap_append_packet(ut->h_pcap_le, nowns,
sig, noise,
refAA, pkt);
lell_pcap_append_ppi_packet(ut->h_pcap_le, nowns,
rx->clkn_high,
rx->rssi_min, rx->rssi_max,
rx->rssi_avg, rx->rssi_count,
pkt);
}
#endif
if (ut->h_pcapng_le) {
lell_pcapng_append_packet(ut->h_pcapng_le, nowns,
sig, noise,
refAA, pkt);
}
// rollover
u32 rx_ts = rx->clk100ns;
if (rx_ts < prev_ts)
rx_ts += 3276800000;
u32 ts_diff = rx_ts - prev_ts;
prev_ts = rx->clk100ns;
printf("systime=%u freq=%d addr=%08x delta_t=%.03f ms rssi=%d\n",
systime, rx->channel + 2402, lell_get_access_address(pkt),
ts_diff / 10000.0, rx->rssi_min - 54);
int len = (rx->data[5] & 0x3f) + 6 + 3;
if (len > 50) len = 50;
for (i = 4; i < len; ++i)
printf("%02x ", rx->data[i]);
printf("\n");
lell_print(pkt);
printf("\n");
lell_packet_unref(pkt);
fflush(stdout);
}