static void led_blinking_setup()
{
uint32_t compare_evt_addr;
uint32_t gpiote_task_addr;
nrf_ppi_channel_t ppi_channel;
ret_code_t err_code;
nrf_drv_gpiote_out_config_t config = GPIOTE_CONFIG_OUT_TASK_TOGGLE(false);
err_code = nrf_drv_gpiote_out_init(GPIO_OUTPUT_PIN_NUMBER, &config);
APP_ERROR_CHECK(err_code);
nrf_drv_timer_extended_compare(&timer, (nrf_timer_cc_channel_t)0, 200 * 1000UL, NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK, false);
err_code = nrf_drv_ppi_channel_alloc(&ppi_channel);
APP_ERROR_CHECK(err_code);
compare_evt_addr = nrf_drv_timer_event_address_get(&timer, NRF_TIMER_EVENT_COMPARE0);
gpiote_task_addr = nrf_drv_gpiote_out_task_addr_get(GPIO_OUTPUT_PIN_NUMBER);
err_code = nrf_drv_ppi_channel_assign(ppi_channel, compare_evt_addr, gpiote_task_addr);
APP_ERROR_CHECK(err_code);
err_code = nrf_drv_ppi_channel_enable(ppi_channel);
APP_ERROR_CHECK(err_code);
nrf_drv_gpiote_out_task_enable(GPIO_OUTPUT_PIN_NUMBER);
}
uint32_t app_simple_timer_start(app_simple_timer_mode_t mode,
app_simple_timer_timeout_handler_t timeout_handler,
uint16_t timeout_ticks,
void * p_context)
{
uint32_t err_code = NRF_SUCCESS;
nrf_timer_short_mask_t timer_short;
VERIFY_PARAM_NOT_NULL(timeout_handler);
if (APP_SIMPLE_TIMER_MODE_REPEATED == mode)
{
timer_short = NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK;
}
else if (APP_SIMPLE_TIMER_MODE_SINGLE_SHOT == mode)
{
timer_short = NRF_TIMER_SHORT_COMPARE0_STOP_MASK;
}
else
{
return NRF_ERROR_INVALID_PARAM;
}
if (SIMPLE_TIMER_STATE_IDLE == m_simple_timer_state)
{
return NRF_ERROR_INVALID_STATE;
}
if (SIMPLE_TIMER_STATE_STARTED == m_simple_timer_state)
{
err_code = app_simple_timer_stop();
APP_ERROR_CHECK(err_code);
}
if (SIMPLE_TIMER_STATE_STOPPED == m_simple_timer_state)
{
nrf_drv_timer_clear(&SIMPLE_TIMER);
}
m_mode = mode;
m_timeout_handler = timeout_handler;
mp_timeout_handler_context = p_context;
nrf_drv_timer_extended_compare(
&SIMPLE_TIMER, NRF_TIMER_CC_CHANNEL0, (uint32_t)timeout_ticks, timer_short, true);
if (m_simple_timer_state == SIMPLE_TIMER_STATE_STOPPED)
{
nrf_drv_timer_resume(&SIMPLE_TIMER);
}
else
{
nrf_drv_timer_enable(&SIMPLE_TIMER);
}
m_simple_timer_state = SIMPLE_TIMER_STATE_STARTED;
return NRF_SUCCESS;
}
void saadc_sampling_event_init(void)
{
ret_code_t err_code;
err_code = nrf_drv_ppi_init();
APP_ERROR_CHECK(err_code);
nrf_drv_timer_config_t timer_config = NRF_DRV_TIMER_DEFAULT_CONFIG;
timer_config.frequency = NRF_TIMER_FREQ_31250Hz;
err_code = nrf_drv_timer_init(&m_timer, &timer_config, timer_handler);
APP_ERROR_CHECK(err_code);
/* setup m_timer for compare event */
uint32_t ticks = nrf_drv_timer_ms_to_ticks(&m_timer,SAADC_SAMPLE_RATE);
nrf_drv_timer_extended_compare(&m_timer, NRF_TIMER_CC_CHANNEL0, ticks, NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK, false);
nrf_drv_timer_enable(&m_timer);
uint32_t timer_compare_event_addr = nrf_drv_timer_compare_event_address_get(&m_timer, NRF_TIMER_CC_CHANNEL0);
uint32_t saadc_sample_event_addr = nrf_drv_saadc_sample_task_get();
/* setup ppi channel so that timer compare event is triggering sample task in SAADC */
err_code = nrf_drv_ppi_channel_alloc(&m_ppi_channel);
APP_ERROR_CHECK(err_code);
err_code = nrf_drv_ppi_channel_assign(m_ppi_channel, timer_compare_event_addr, saadc_sample_event_addr);
APP_ERROR_CHECK(err_code);
}
void BSP_init(void) {
uint32_t err_code;
err_code = nrf_drv_timer_init(&TIMER1, NULL, Timer1_handler);
APP_ERROR_CHECK(err_code);
nrf_drv_timer_extended_compare(&TIMER1, NRF_TIMER_CC_CHANNEL0
, nrf_drv_timer_ms_to_ticks(&TIMER1, 1000/BSP_TICKS_PER_SEC)
, NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK, true);
// Configure button 1 for low accuracy (why not high accuracy?)
Q_ALLEGE(nrf_drv_gpiote_init() == NRF_SUCCESS);
nrf_drv_gpiote_in_config_t config = GPIOTE_CONFIG_IN_SENSE_TOGGLE(true);
config.pull = NRF_GPIO_PIN_PULLUP;
Q_ALLEGE(nrf_drv_gpiote_in_init(BTN_PIN, &config, btn1_event_handler)
== NRF_SUCCESS);
nrf_drv_gpiote_in_event_enable(BTN_PIN, /* int enable = */ true);
NRF_GPIO->DIRSET = 1 << GPIO_TP;
/* initialize the QS software tracing... */
if (QS_INIT((void *)0) == 0) {
Q_ERROR();
}
}
/** @brief Function for Timer 1 initialization.
* @details Initializes Timer 1 peripheral, creates event and interrupt every 2 seconds,
* by configuring CC[0] to timer overflow value, we create events at even number of seconds
* for example, events are created at 2,4,6 ... seconds. This event can be used to stop Timer 0
* with Timer1->Event_Compare[0] triggering Timer 0 TASK_STOP through PPI.
*/
static void timer1_init(void)
{
// Configure Timer 1 to overflow every 2 seconds. Check TIMER1 configuration for details
// The overflow occurs every 0xFFFF/(SysClk/2^PRESCALER).
// = 65535/31250 = 2.097 sec
ret_code_t err_code = nrf_drv_timer_init(&timer1, NULL, timer_event_handler);
APP_ERROR_CHECK(err_code);
nrf_drv_timer_extended_compare(&timer1, NRF_TIMER_CC_CHANNEL0, 0xFFFFUL, NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK, false);
}
/** @brief Function for Timer 2 initialization.
* @details Initializes Timer 2 peripheral, creates event and interrupt every 2 seconds
* by configuring CC[0] to half of timer overflow value. Events are created at odd number of seconds.
* For example, events are created at 1,3,5,... seconds. This event can be used to start Timer 0
* with Timer2->Event_Compare[0] triggering Timer 0 TASK_START through PPI.
*/
static void timer2_init(void)
{
// Generate interrupt/event when half of time before the timer overflows has past, that is at 1,3,5,7... seconds from start.
// Check TIMER1 configuration for details
// now the overflow occurs every 0xFFFF/(SysClk/2^PRESCALER)
// = 65535/31250 = 2.097 sec */
ret_code_t err_code = nrf_drv_timer_init(&timer2, NULL, timer_event_handler);
APP_ERROR_CHECK(err_code);
nrf_drv_timer_extended_compare(&timer2, NRF_TIMER_CC_CHANNEL0, 0x7FFFUL, NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK, false);
}
/** @brief Function initialization and configuration of timer driver instance.
*/
static void timer_config(void) {
uint32_t time_in_ms = 1000; //Time(in miliseconds) between consecutive compare events.
// see
uint32_t time2ticks;
uint32_t err_code;
err_code = nrf_drv_timer_init(&mytimer1, NULL, timer1_handler);
APP_ERROR_CHECK(err_code);
time2ticks = nrf_drv_timer_ms_to_ticks(&mytimer1, time_in_ms);
/*
|----| |----|
| | | |
____| |______________________..._____| |____...
1s 1s 8s 1s 1s
*/
nrf_drv_timer_extended_compare(&mytimer1, NRF_TIMER_CC_CHANNEL0, time2ticks, NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK, true);
nrf_drv_timer_enable(&mytimer1);
}
/**
* @brief Function for initializing timers.
*
* @retval NRF_ERROR_INTERNAL If there were error initializing timers.
* @retval NRF_SUCCESS If timers were initialized successfully.
*/
static ret_code_t timer_init(void)
{
ret_code_t err_code;
//set first timer in timer mode to get period of relaxation oscillator
nrf_drv_timer_config_t timer_config = NRF_DRV_TIMER_DEFAULT_CONFIG;
timer_config.mode = NRF_TIMER_MODE_TIMER;
err_code = nrf_drv_timer_init(&m_timer1, &timer_config, dummy_handler);
if (err_code != NRF_SUCCESS)
{
return NRF_ERROR_INTERNAL;
}
//set second timer in counter mode and generate event on tenth period
timer_config.mode = NRF_TIMER_MODE_COUNTER;
err_code = nrf_drv_timer_init(&m_timer0, &timer_config, counter_compare_handler);
if (err_code != NRF_SUCCESS)
{
return NRF_ERROR_INTERNAL;
}
nrf_drv_timer_extended_compare(&m_timer0, NRF_TIMER_CC_CHANNEL0, MEASUREMENT_PERIOD, (nrf_timer_short_mask_t)(NRF_TIMER_SHORT_COMPARE0_CLEAR_MASK | NRF_TIMER_SHORT_COMPARE0_STOP_MASK), true);
return NRF_SUCCESS;
}
