/*! \brief Recalculate position of a list (GList) of objects.
* \par Function Description
* This function will take a list (GList) of objects and recalculate their
* positions on the screen.
*
* \param [in] toplevel The TOPLEVEL object.
* \param [in,out] object_glist OBJECT list to recalculate.
*
*/
void
o_recalc_object_glist(TOPLEVEL *toplevel, GList *object_glist)
{
GList *list = object_glist;
OBJECT *o_current;
while (list != NULL) {
o_current = (OBJECT *) list->data;
o_recalc_single_object(toplevel, o_current);
list = g_list_next(list);
}
}
/*! \brief Set an #OBJECT's line options.
* \par Function Description
* This function allows a line's end, type, width, length and space to be set.
* See #OBJECT_END and #OBJECT_TYPE for information on valid
* object end and type values.
*
* \param [in] toplevel The TOPLEVEL object.
* \param [in,out] o_current OBJECT to set line options on.
* \param [in] end An OBJECT_END.
* \param [in] type An OBJECT_TYPE.
* \param [in] width Line width.
* \param [in] length Line length.
* \param [in] space Spacing between dashes/dots. Cannot be negative.
*
* \todo Make space an unsigned int and check for a max value instead.
* If a max value is not required, then it would simplify the code.
*/
void o_set_line_options(TOPLEVEL *toplevel, OBJECT *o_current,
OBJECT_END end, OBJECT_TYPE type,
int width, int length, int space)
{
if(o_current == NULL) {
return;
}
/* do some error checking / correcting */
switch(type) {
case(TYPE_DOTTED):
if (space < 1) {
space = 100;
s_log_message (_("Invalid space specified, setting to 100\n"));
}
break;
case(TYPE_DASHED):
case(TYPE_CENTER):
case(TYPE_PHANTOM):
if (length < 1) {
length = 100;
s_log_message (_("Invalid length specified, setting to 100\n"));
}
if (space < 1) {
space = 100;
s_log_message (_("Invalid space specified, setting to 100\n"));
}
break;
default:
break;
}
o_emit_pre_change_notify (toplevel, o_current);
o_current->line_width = width;
o_current->line_end = end;
o_current->line_type = type;
o_current->line_length = length;
o_current->line_space = space;
/* Recalculate the object's bounding box */
o_recalc_single_object( toplevel, o_current );
o_emit_change_notify (toplevel, o_current);
}
/*! \brief Return the bounds of the given object.
* \par Given an object, calculate the bounds coordinates.
* \param [in] toplevel The toplevel structure.
* \param [in] o_current The object to look the bounds for.
* \param [out] rleft pointer to the left coordinate of the object.
* \param [out] rtop pointer to the top coordinate of the object.
* \param [out] rright pointer to the right coordinate of the object.
* \param [out] rbottom pointer to the bottom coordinate of the object.
* \return If any bounds were found for the object
* \retval 0 No bound was found
* \retval 1 Bound was found
*/
int world_get_single_object_bounds(TOPLEVEL *toplevel, OBJECT *o_current,
int *rleft, int *rtop, int *rright, int *rbottom)
{
if (o_current != NULL) {
switch(o_current->type) {
case(OBJ_TEXT):
/* only do bounding boxes for visible or doing show_hidden_text*/
/* you might lose some attrs though */
if (! (o_is_visible (toplevel, o_current) ||
toplevel->show_hidden_text)) {
return 0;
}
/* This case falls through intentionally */
case(OBJ_LINE):
case(OBJ_NET):
case(OBJ_BUS):
case(OBJ_BOX):
case(OBJ_PICTURE):
case(OBJ_CIRCLE):
case(OBJ_PATH):
case(OBJ_PIN):
case(OBJ_ARC):
case(OBJ_COMPLEX):
case(OBJ_PLACEHOLDER):
if (!o_current->w_bounds_valid) {
o_recalc_single_object (toplevel, o_current);
if (!o_current->w_bounds_valid) {
return 0;
}
}
*rleft = o_current->w_left;
*rtop = o_current->w_top;
*rright = o_current->w_right;
*rbottom = o_current->w_bottom;
return 1;
default:
break;
}
}
return 0;
}
/*! \todo Finish function documentation!!!
* \brief
* \par Function Description
*
*/
void o_edit_show_hidden_lowlevel (GSCHEM_TOPLEVEL *w_current,
const GList *o_list)
{
TOPLEVEL *toplevel = w_current->toplevel;
OBJECT *o_current;
const GList *iter;
iter = o_list;
while (iter != NULL) {
o_current = (OBJECT *)iter->data;
if (o_current->type == OBJ_TEXT && !o_is_visible (toplevel, o_current)) {
/* don't toggle the visibility flag */
o_text_recreate (toplevel, o_current);
}
if (o_current->type == OBJ_COMPLEX || o_current->type == OBJ_PLACEHOLDER) {
o_edit_show_hidden_lowlevel(w_current, o_current->complex->prim_objs);
o_recalc_single_object(toplevel, o_current);
}
iter = g_list_next (iter);
}
}
/*! \todo Finish function documentation!!!
* \brief
* \par Function Description
*
*/
int o_net_add_busrippers(GSCHEM_TOPLEVEL *w_current, OBJECT *net_obj,
GList *prev_conn_objects)
{
TOPLEVEL *toplevel = w_current->toplevel;
OBJECT *new_obj;
int color;
GList *cl_current = NULL;
OBJECT *bus_object = NULL;
CONN *found_conn = NULL;
int done;
int otherone;
BUS_RIPPER rippers[2];
int ripper_count = 0;
int i;
double length;
int sign;
double distance1, distance2;
int first, second;
int made_changes = FALSE;
const int ripper_size = w_current->bus_ripper_size;
int complex_angle = 0;
const CLibSymbol *rippersym = NULL;
length = o_line_length(net_obj);
if (!prev_conn_objects) {
return(FALSE);
}
if (length <= ripper_size) {
return(FALSE);
}
if (toplevel->override_net_color == -1) {
color = NET_COLOR;
} else {
color = toplevel->override_net_color;
}
/* check for a bus connection and draw rippers if so */
cl_current = prev_conn_objects;
while (cl_current != NULL) {
bus_object = (OBJECT *) cl_current->data;
if (bus_object && bus_object->type == OBJ_BUS) {
/* yes, using the net routine is okay */
int bus_orientation = o_net_orientation(bus_object);
int net_orientation = o_net_orientation(net_obj);
/* find the CONN structure which is associated with this object */
GList *cl_current2 = net_obj->conn_list;
done = FALSE;
while (cl_current2 != NULL && !done) {
CONN *tmp_conn = (CONN *) cl_current2->data;
if (tmp_conn && tmp_conn->other_object &&
tmp_conn->other_object == bus_object) {
found_conn = tmp_conn;
done = TRUE;
}
cl_current2 = g_list_next(cl_current2);
}
if (!found_conn) {
return(FALSE);
}
otherone = !found_conn->whichone;
/* now deal with the found connection */
if (bus_orientation == HORIZONTAL && net_orientation == VERTICAL) {
/* printf("found horiz bus %s %d!\n", bus_object->name,
found_conn->whichone);*/
sign = bus_object->bus_ripper_direction;
if (!sign) {
if (bus_object->line->x[0] < bus_object->line->x[1]) {
first = 0;
second = 1;
} else {
first = 1;
second = 0;
}
distance1 = abs(bus_object->line->x[first] -
net_obj->line->x[found_conn->whichone]);
distance2 = abs(bus_object->line->x[second] -
net_obj->line->x[found_conn->whichone]);
if (distance1 <= distance2) {
sign = 1;
} else {
sign = -1;
}
bus_object->bus_ripper_direction = sign;
}
/* printf("hor sign: %d\n", sign); */
if (net_obj->line->y[otherone] < bus_object->line->y[0]) {
/* new net is below bus */
/*printf("below\n");*/
if (ripper_count >= 2) {
/* try to exit gracefully */
fprintf(stderr, _("Tried to add more than two bus rippers. Internal gschem error.\n"));
made_changes = FALSE;
break;
}
if (w_current->bus_ripper_rotation == NON_SYMMETRIC) {
/* non-symmetric */
if (sign == 1) {
complex_angle = 0;
} else {
complex_angle = 90;
}
} else {
/* symmetric */
complex_angle = 0;
}
net_obj->line->y[found_conn->whichone] -= ripper_size;
o_recalc_single_object(toplevel, net_obj);
rippers[ripper_count].x[0] =
net_obj->line->x[found_conn->whichone];
rippers[ripper_count].y[0] =
net_obj->line->y[found_conn->whichone];
rippers[ripper_count].x[1] =
net_obj->line->x[found_conn->whichone] + sign*ripper_size;
rippers[ripper_count].y[1] =
net_obj->line->y[found_conn->whichone] + ripper_size;
ripper_count++;
/* printf("done\n"); */
made_changes++;
} else {
/* new net is above bus */
/* printf("above\n"); */
if (ripper_count >= 2) {
/* try to exit gracefully */
fprintf(stderr, _("Tried to add more than two bus rippers. Internal gschem error.\n"));
made_changes = FALSE;
break;
}
if (w_current->bus_ripper_rotation == NON_SYMMETRIC) {
/* non-symmetric */
if (sign == 1) {
complex_angle = 270;
} else {
complex_angle = 180;
}
} else {
/* symmetric */
complex_angle = 180;
}
net_obj->line->y[found_conn->whichone] += ripper_size;
o_recalc_single_object(toplevel, net_obj);
rippers[ripper_count].x[0] =
net_obj->line->x[found_conn->whichone];
rippers[ripper_count].y[0] =
net_obj->line->y[found_conn->whichone];
rippers[ripper_count].x[1] =
net_obj->line->x[found_conn->whichone] + sign*ripper_size;
rippers[ripper_count].y[1] =
net_obj->line->y[found_conn->whichone] - ripper_size;
ripper_count++;
/* printf("done\n"); */
made_changes++;
}
} else if (bus_orientation == VERTICAL &&
net_orientation == HORIZONTAL) {
/* printf("found vert bus %s %d!\n", bus_object->name,
found_conn->whichone); */
sign = bus_object->bus_ripper_direction;
if (!sign) {
if (bus_object->line->y[0] < bus_object->line->y[1]) {
first = 0;
second = 1;
} else {
first = 1;
second = 0;
}
distance1 = abs(bus_object->line->y[first] -
net_obj->line->y[found_conn->whichone]);
distance2 = abs(bus_object->line->y[second] -
net_obj->line->y[found_conn->whichone]);
if (distance1 <= distance2) {
sign = 1;
} else {
sign = -1;
}
bus_object->bus_ripper_direction = sign;
}
/* printf("ver sign: %d\n", sign); */
if (net_obj->line->x[otherone] < bus_object->line->x[0]) {
/* new net is to the left of the bus */
/* printf("left\n"); */
if (ripper_count >= 2) {
/* try to exit gracefully */
fprintf(stderr, _("Tried to add more than two bus rippers. Internal gschem error.\n"));
made_changes = FALSE;
break;
}
if (w_current->bus_ripper_rotation == NON_SYMMETRIC) {
/* non-symmetric */
if (sign == 1) {
complex_angle = 0;
} else {
complex_angle = 270;
}
} else {
/* symmetric */
complex_angle = 270;
}
net_obj->line->x[found_conn->whichone] -= ripper_size;
o_recalc_single_object(toplevel, net_obj);
rippers[ripper_count].x[0] =
net_obj->line->x[found_conn->whichone];
rippers[ripper_count].y[0] =
net_obj->line->y[found_conn->whichone];
rippers[ripper_count].x[1] =
net_obj->line->x[found_conn->whichone] + ripper_size;
rippers[ripper_count].y[1] =
net_obj->line->y[found_conn->whichone] + sign*ripper_size;
ripper_count++;
made_changes++;
} else {
/* new net is to the right of the bus */
/* printf("right\n"); */
if (ripper_count >= 2) {
/* try to exit gracefully */
fprintf(stderr, _("Tried to add more than two bus rippers. Internal gschem error.\n"));
made_changes = FALSE;
break;
}
if (w_current->bus_ripper_rotation == NON_SYMMETRIC) {
/* non-symmetric */
if (sign == 1) {
complex_angle = 90;
} else {
complex_angle = 180;
}
} else {
/* symmetric */
complex_angle = 90;
}
net_obj->line->x[found_conn->whichone] += ripper_size;
o_recalc_single_object(toplevel, net_obj);
rippers[ripper_count].x[0] =
net_obj->line->x[found_conn->whichone];
rippers[ripper_count].y[0] =
net_obj->line->y[found_conn->whichone];
rippers[ripper_count].x[1] =
net_obj->line->x[found_conn->whichone] - ripper_size;
rippers[ripper_count].y[1] =
net_obj->line->y[found_conn->whichone] + sign*ripper_size;
ripper_count++;
made_changes++;
}
}
}
cl_current = g_list_next(cl_current);
}
if (made_changes) {
s_conn_remove_object (toplevel, net_obj);
if (w_current->bus_ripper_type == COMP_BUS_RIPPER) {
GList *symlist =
s_clib_search (toplevel->bus_ripper_symname, CLIB_EXACT);
if (symlist != NULL) {
rippersym = (CLibSymbol *) symlist->data;
}
g_list_free (symlist);
}
for (i = 0; i < ripper_count; i++) {
if (w_current->bus_ripper_type == NET_BUS_RIPPER) {
new_obj = o_net_new(toplevel, OBJ_NET, color,
rippers[i].x[0], rippers[i].y[0],
rippers[i].x[1], rippers[i].y[1]);
s_page_append (toplevel->page_current, new_obj);
} else {
if (rippersym != NULL) {
new_obj = o_complex_new (toplevel, OBJ_COMPLEX, DEFAULT_COLOR,
rippers[i].x[0], rippers[i].y[0],
complex_angle, 0,
rippersym,
toplevel->bus_ripper_symname, 1);
s_page_append_list (toplevel->page_current,
o_complex_promote_attribs (toplevel, new_obj));
s_page_append (toplevel->page_current, new_obj);
o_invalidate (w_current, new_obj);
} else {
s_log_message(_("Bus ripper symbol [%s] was not found in any component library\n"),
toplevel->bus_ripper_symname);
}
}
}
s_conn_update_object (toplevel, net_obj);
return(TRUE);
}
return(FALSE);
}
