static int __init bw2_init(void)
{
if (fb_get_options("bw2fb", NULL))
return -ENODEV;
return of_register_driver(&bw2_driver, &of_bus_type);
}
int __init tcx_init(void)
{
if (fb_get_options("tcxfb", NULL))
return -ENODEV;
return of_register_driver(&tcx_driver, &of_bus_type);
}
static int __init cg14_init(void)
{
if (fb_get_options("cg14fb", NULL))
return -ENODEV;
return of_register_driver(&cg14_driver, &of_bus_type);
}
static int __init
i2c_keywest_init(void)
{
macio_register_driver(&i2c_keywest_macio_driver);
of_register_driver(&i2c_keywest_of_platform_driver);
return 0;
}
void __init power_init(void)
{
of_register_driver(&power_driver, &of_platform_bus_type);
return;
}
static int __init pmc_init(void)
{
return of_register_driver(&pmc_driver, &of_bus_type);
}
static int __init auxio_init(void)
{
return of_register_driver(&auxio_driver, &of_platform_bus_type);
}
static int __init myri_sbus_init(void)
{
return of_register_driver(&myri_sbus_driver, &of_bus_type);
}
static int __init d7s_init(void)
{
return of_register_driver(&d7s_driver, &of_bus_type);
}
static int __init parport_sunbpp_init(void)
{
return of_register_driver(&bpp_sbus_driver, &of_bus_type);
}
static int __init envctrl_init(void)
{
return of_register_driver(&envctrl_driver, &of_bus_type);
}
static int __init power_init(void)
{
return of_register_driver(&power_driver, &of_platform_bus_type);
}
/* Probe for the mostek real time clock chip. */
static int __init clock_init(void)
{
return of_register_driver(&clock_driver, &of_platform_bus_type);
}
int __init gaisler_apbuart_init(void)
{
int ret;
int i;
int node;
int freq_khz;
int baud_rates[UART_NR];
_apbuart_init_bases();
node = prom_getchild(prom_root_node);
freq_khz = prom_getint(node, "clock-frequency");
printk(KERN_INFO "grlib apbuart: %i serial driver(s) at [",
leon_ports_nr);
for (i = 0; i < UART_NR; i++) {
baud_rates[i] = 9600;
}
for (i = 0; i < leon_ports_nr; i++) {
baud_rates[i] = prom_getintdefault(node, "uart1_baud", 9600);
if (i != 0) {
printk(",");
}
printk("0x%x", (unsigned int)leon_ports[i].port.mapbase);
printk("(irq %i)", leon_ports[i].port.irq);
}
printk("]\n");
baud_rates[0] = prom_getintdefault(node, "uart1_baud", 9600);
baud_rates[1] = prom_getintdefault(node, "uart2_baud", 9600);
printk(KERN_INFO
"grlib apbuart: system frequency: %i khz, baud rates: %i %i\n",
freq_khz, baud_rates[0], baud_rates[1]);
ret = uart_register_driver(&leon_reg);
leon_reg.tty_driver->init_termios.c_cflag =
(leon_reg.tty_driver->init_termios.c_cflag & ~CBAUD) | B38400;
if (ret)
return ret;
/*
* Set the FIFO size after the baud rates are set so it'll be done at an
* appropriate rate. Also flush the FIFOs just in case they have lingering
* data.
*/
of_register_driver(&apbuart_driver, &of_platform_bus_type);
/*for (i = 0; i < leon_ports_nr; i++) {
struct console co;
leon_ports[i].port.uartclk = freq_khz * 1000;
uart_add_one_port(&leon_reg, &leon_ports[i].port);
uart_set_options(&leon_ports[i].port, &co,
baud_rates[i], 'n', 8, 'n');
leon_ports[i].port.fifosize = apbuart_scan_fifo_size(i);
apbuart_flush_fifo(&leon_ports[i].port);
}*/
return ret;
}
