void
copy_disp_props(struct device *dev, int node, prop_dictionary_t dict)
{
uint32_t temp;
char typestr[32];
memset(typestr, 0, sizeof(typestr));
OF_getprop(console_node, "device_type", typestr, sizeof(typestr));
if (strcmp(typestr, "serial") != 0) {
/* this is our console, when we don't have a serial console */
prop_dictionary_set_bool(dict, "is_console", 1);
}
if (!of_to_uint32_prop(dict, node, "width", "width")) {
OF_interpret("screen-width", 0, 1, &temp);
prop_dictionary_set_uint32(dict, "width", temp);
}
if (!of_to_uint32_prop(dict, node, "height", "height")) {
OF_interpret("screen-height", 0, 1, &temp);
prop_dictionary_set_uint32(dict, "height", temp);
}
of_to_uint32_prop(dict, node, "linebytes", "linebytes");
if (!of_to_uint32_prop(dict, node, "depth", "depth")) {
/*
* XXX we should check linebytes vs. width but those
* FBs that don't have a depth property ( /chaos/control... )
* won't have linebytes either
*/
prop_dictionary_set_uint32(dict, "depth", 8);
}
if (!of_to_uint32_prop(dict, node, "address", "address")) {
uint32_t fbaddr = 0;
OF_interpret("frame-buffer-adr", 0, 1, &fbaddr);
if (fbaddr != 0)
prop_dictionary_set_uint32(dict, "address", fbaddr);
}
}
/*
* Called back during autoconfiguration for each device found
*/
void
device_register(device_t dev, void *aux)
{
device_t busdev = device_parent(dev);
int ofnode = 0;
/*
* We don't know the type of 'aux' - it depends on the
* bus this device attaches to. We are only interested in
* certain bus types, this only is used to find the boot
* device.
*/
if (busdev == NULL) {
/*
* Ignore mainbus0 itself, it certainly is not a boot
* device.
*/
} else if (device_is_a(busdev, "mainbus")) {
struct mainbus_attach_args *ma = aux;
ofnode = ma->ma_node;
} else if (device_is_a(busdev, "pci")) {
struct pci_attach_args *pa = aux;
ofnode = PCITAG_NODE(pa->pa_tag);
} else if (device_is_a(busdev, "sbus") || device_is_a(busdev, "dma")
|| device_is_a(busdev, "ledma")) {
struct sbus_attach_args *sa = aux;
ofnode = sa->sa_node;
} else if (device_is_a(busdev, "ebus")) {
struct ebus_attach_args *ea = aux;
ofnode = ea->ea_node;
} else if (device_is_a(busdev, "iic")) {
struct i2c_attach_args *ia = aux;
if (ia->ia_name == NULL) /* indirect config */
return;
ofnode = (int)ia->ia_cookie;
} else if (device_is_a(dev, "sd") || device_is_a(dev, "cd")) {
struct scsipibus_attach_args *sa = aux;
struct scsipi_periph *periph = sa->sa_periph;
int off = 0;
/*
* There are two "cd" attachments:
* atapibus -> atabus -> controller
* scsibus -> controller
* We want the node of the controller.
*/
if (device_is_a(busdev, "atapibus")) {
busdev = device_parent(busdev);
/*
* if the atapibus is connected to the secondary
* channel of the atabus, we need an offset of 2
* to match OF's idea of the target number.
* (i.e. on U5/U10 "cdrom" and "disk2" have the
* same target encoding, though different names)
*/
if (periph->periph_channel->chan_channel == 1)
off = 2;
}
ofnode = device_ofnode(device_parent(busdev));
dev_path_drive_match(dev, ofnode, periph->periph_target + off,
0, periph->periph_lun);
return;
} else if (device_is_a(dev, "wd")) {
struct ata_device *adev = aux;
ofnode = device_ofnode(device_parent(busdev));
dev_path_drive_match(dev, ofnode, adev->adev_channel*2+
adev->adev_drv_data->drive, 0, 0);
return;
}
if (busdev == NULL)
return;
if (ofnode != 0) {
uint8_t eaddr[ETHER_ADDR_LEN];
char tmpstr[32];
char tmpstr2[32];
int node;
uint32_t id = 0;
uint64_t nwwn = 0, pwwn = 0;
prop_dictionary_t dict;
prop_data_t blob;
prop_number_t pwwnd = NULL, nwwnd = NULL;
prop_number_t idd = NULL;
device_setofnode(dev, ofnode);
dev_path_exact_match(dev, ofnode);
if (OF_getprop(ofnode, "name", tmpstr, sizeof(tmpstr)) <= 0)
tmpstr[0] = 0;
if (OF_getprop(ofnode, "device_type", tmpstr2, sizeof(tmpstr2)) <= 0)
tmpstr2[0] = 0;
/*
* If this is a network interface, note the
* mac address.
*/
if (strcmp(tmpstr, "network") == 0
|| strcmp(tmpstr, "ethernet") == 0
|| strcmp(tmpstr2, "network") == 0
|| strcmp(tmpstr2, "ethernet") == 0
|| OF_getprop(ofnode, "mac-address", &eaddr, sizeof(eaddr))
>= ETHER_ADDR_LEN
|| OF_getprop(ofnode, "local-mac-address", &eaddr, sizeof(eaddr))
>= ETHER_ADDR_LEN) {
dict = device_properties(dev);
/*
* Is it a network interface with FCode?
*/
if (strcmp(tmpstr, "network") == 0 ||
strcmp(tmpstr2, "network") == 0) {
prop_dictionary_set_bool(dict,
"without-seeprom", true);
prom_getether(ofnode, eaddr);
} else {
if (!prom_get_node_ether(ofnode, eaddr))
goto noether;
}
blob = prop_data_create_data(eaddr, ETHER_ADDR_LEN);
prop_dictionary_set(dict, "mac-address", blob);
prop_object_release(blob);
of_to_dataprop(dict, ofnode, "shared-pins",
"shared-pins");
}
noether:
/* is this a FC node? */
if (strcmp(tmpstr, "scsi-fcp") == 0) {
dict = device_properties(dev);
if (OF_getprop(ofnode, "port-wwn", &pwwn, sizeof(pwwn))
== sizeof(pwwn)) {
pwwnd =
prop_number_create_unsigned_integer(pwwn);
prop_dictionary_set(dict, "port-wwn", pwwnd);
prop_object_release(pwwnd);
}
if (OF_getprop(ofnode, "node-wwn", &nwwn, sizeof(nwwn))
== sizeof(nwwn)) {
nwwnd =
prop_number_create_unsigned_integer(nwwn);
prop_dictionary_set(dict, "node-wwn", nwwnd);
prop_object_release(nwwnd);
}
}
/* is this an spi device? look for scsi-initiator-id */
if (strcmp(tmpstr2, "scsi") == 0 ||
strcmp(tmpstr2, "scsi-2") == 0) {
dict = device_properties(dev);
for (node = ofnode; node != 0; node = OF_parent(node)) {
if (OF_getprop(node, "scsi-initiator-id", &id,
sizeof(id)) <= 0)
continue;
idd = prop_number_create_unsigned_integer(id);
prop_dictionary_set(dict,
"scsi-initiator-id", idd);
prop_object_release(idd);
break;
}
}
}
/*
* Check for I2C busses and add data for their direct configuration.
*/
if (device_is_a(dev, "iic")) {
int busnode = device_ofnode(busdev);
if (busnode) {
prop_dictionary_t props = device_properties(busdev);
prop_object_t cfg = prop_dictionary_get(props,
"i2c-child-devices");
if (!cfg) {
int node;
const char *name;
/*
* pmu's i2c devices are under the "i2c" node,
* so find it out.
*/
name = prom_getpropstring(busnode, "name");
if (strcmp(name, "pmu") == 0) {
for (node = OF_child(busnode);
node != 0; node = OF_peer(node)) {
name = prom_getpropstring(node,
"name");
if (strcmp(name, "i2c") == 0) {
busnode = node;
break;
}
}
}
of_enter_i2c_devs(props, busnode,
sizeof(cell_t));
}
}
/*
* Add SPARCle spdmem devices (0x50 and 0x51) that the
* firmware does not know about.
*/
if (!strcmp(machine_model, "TAD,SPARCLE")) {
prop_dictionary_t props = device_properties(busdev);
prop_array_t cfg = prop_array_create();
int i;
DPRINTF(ACDB_PROBE, ("\nAdding spdmem for SPARCle "));
for (i = 0x50; i <= 0x51; i++) {
prop_dictionary_t spd =
prop_dictionary_create();
prop_dictionary_set_cstring(spd, "name",
"dimm-spd");
prop_dictionary_set_uint32(spd, "addr", i);
prop_dictionary_set_uint64(spd, "cookie", 0);
prop_array_add(cfg, spd);
prop_object_release(spd);
}
prop_dictionary_set(props, "i2c-child-devices", cfg);
prop_object_release(cfg);
}
}
/* set properties for PCI framebuffers */
if (device_is_a(busdev, "pci")) {
/* see if this is going to be console */
struct pci_attach_args *pa = aux;
prop_dictionary_t dict;
int sub;
int console = 0;
dict = device_properties(dev);
/* we only care about display devices from here on */
if (PCI_CLASS(pa->pa_class) != PCI_CLASS_DISPLAY)
return;
console = (ofnode == console_node);
if (!console) {
/*
* see if any child matches since OF attaches
* nodes for each head and /chosen/stdout
* points to the head rather than the device
* itself in this case
*/
sub = OF_child(ofnode);
while ((sub != 0) && (sub != console_node)) {
sub = OF_peer(sub);
}
if (sub == console_node) {
console = true;
}
}
copyprops(busdev, ofnode, dict, console);
if (console) {
uint64_t cmap_cb;
prop_dictionary_set_uint32(dict,
"instance_handle", console_instance);
gfb_cb.gcc_cookie =
(void *)(intptr_t)console_instance;
gfb_cb.gcc_set_mapreg = of_set_palette;
cmap_cb = (uint64_t)(uintptr_t)&gfb_cb;
prop_dictionary_set_uint64(dict,
"cmap_callback", cmap_cb);
}
#ifdef notyet
else {
int width;
/*
* the idea is to 'open' display devices with no useful
* properties, in the hope that the firmware will
* properly initialize them and we can run things like
* genfb on them
*/
if (OF_getprop(node, "width", &width, sizeof(width))
!= 4) {
instance = OF_open(name);
#endif
}
}
/*
* Called back after autoconfiguration of a device is done
*/
void
device_register_post_config(device_t dev, void *aux)
{
if (booted_device == NULL && device_is_a(dev, "sd")) {
struct scsipibus_attach_args *sa = aux;
struct scsipi_periph *periph = sa->sa_periph;
uint64_t wwn = 0;
int ofnode;
/*
* If this is a FC-AL drive it will have
* aquired its WWN device property by now,
* so we can properly match it.
*/
if (prop_dictionary_get_uint64(device_properties(dev),
"port-wwn", &wwn)) {
/*
* Different to what we do in device_register,
* we do not pass the "controller" ofnode,
* because FC-AL devices attach below a "fp" node,
* E.g.: /pci/SUNW,qlc@4/fp@0,0/disk
* and we need the parent of "disk" here.
*/
ofnode = device_ofnode(
device_parent(device_parent(dev)));
for (ofnode = OF_child(ofnode);
ofnode != 0 && booted_device == NULL;
ofnode = OF_peer(ofnode)) {
dev_path_drive_match(dev, ofnode,
periph->periph_target,
wwn, periph->periph_lun);
}
}
}
}
static void
copyprops(device_t busdev, int node, prop_dictionary_t dict, int is_console)
{
device_t cntrlr;
prop_dictionary_t psycho;
paddr_t fbpa, mem_base = 0;
uint32_t temp, fboffset;
uint32_t fbaddr = 0;
int options;
char output_device[256];
char *pos;
cntrlr = device_parent(busdev);
if (cntrlr != NULL) {
psycho = device_properties(cntrlr);
prop_dictionary_get_uint64(psycho, "mem_base", &mem_base);
}
if (is_console)
prop_dictionary_set_bool(dict, "is_console", 1);
of_to_uint32_prop(dict, node, "width", "width");
of_to_uint32_prop(dict, node, "height", "height");
of_to_uint32_prop(dict, node, "linebytes", "linebytes");
if (!of_to_uint32_prop(dict, node, "depth", "depth") &&
/* Some cards have an extra space in the property name */
!of_to_uint32_prop(dict, node, "depth ", "depth")) {
/*
* XXX we should check linebytes vs. width but those
* FBs that don't have a depth property ( /chaos/control... )
* won't have linebytes either
*/
prop_dictionary_set_uint32(dict, "depth", 8);
}
OF_getprop(node, "address", &fbaddr, sizeof(fbaddr));
if (fbaddr != 0) {
pmap_extract(pmap_kernel(), fbaddr, &fbpa);
#ifdef DEBUG
printf("membase: %lx fbpa: %lx\n", (unsigned long)mem_base,
(unsigned long)fbpa);
#endif
if (mem_base == 0) {
/* XXX this is guesswork */
fboffset = (uint32_t)(fbpa & 0xffffffff);
}
fboffset = (uint32_t)(fbpa - mem_base);
prop_dictionary_set_uint32(dict, "address", fboffset);
}
if (!of_to_dataprop(dict, node, "EDID", "EDID"))
of_to_dataprop(dict, node, "edid", "EDID");
temp = 0;
if (OF_getprop(node, "ATY,RefCLK", &temp, sizeof(temp)) != 4) {
OF_getprop(OF_parent(node), "ATY,RefCLK", &temp,
sizeof(temp));
}
if (temp != 0)
prop_dictionary_set_uint32(dict, "refclk", temp / 10);
/*
* finally, let's see if there's a video mode specified in
* output-device and pass it on so drivers like radeonfb
* can do their thing
*/
if (!is_console)
return;
options = OF_finddevice("/options");
if ((options == 0) || (options == -1))
return;
if (OF_getprop(options, "output-device", output_device, 256) == 0)
return;
/* find the mode string if there is one */
pos = strstr(output_device, ":r");
if (pos == NULL)
return;
prop_dictionary_set_cstring(dict, "videomode", pos + 2);
}
static void
of_set_palette(void *cookie, int index, int r, int g, int b)
{
int ih = (int)((intptr_t)cookie);
OF_call_method_1("color!", ih, 4, r, g, b, index);
}
static void
copyprops(struct device *busdev, int node, prop_dictionary_t dict)
{
struct device *cntrlr;
prop_dictionary_t psycho;
paddr_t fbpa, mem_base = 0;
uint32_t temp, fboffset;
uint32_t fbaddr = 0;
int options;
char output_device[256];
char *pos;
cntrlr = device_parent(busdev);
if (cntrlr != NULL) {
psycho = device_properties(cntrlr);
prop_dictionary_get_uint64(psycho, "mem_base", &mem_base);
}
prop_dictionary_set_bool(dict, "is_console", 1);
if (!of_to_uint32_prop(dict, node, "width", "width")) {
OF_interpret("screen-width", 0, 1, &temp);
prop_dictionary_set_uint32(dict, "width", temp);
}
if (!of_to_uint32_prop(dict, console_node, "height", "height")) {
OF_interpret("screen-height", 0, 1, &temp);
prop_dictionary_set_uint32(dict, "height", temp);
}
of_to_uint32_prop(dict, console_node, "linebytes", "linebytes");
if (!of_to_uint32_prop(dict, console_node, "depth", "depth") &&
/* Some cards have an extra space in the property name */
!of_to_uint32_prop(dict, console_node, "depth ", "depth")) {
/*
* XXX we should check linebytes vs. width but those
* FBs that don't have a depth property ( /chaos/control... )
* won't have linebytes either
*/
prop_dictionary_set_uint32(dict, "depth", 8);
}
OF_getprop(console_node, "address", &fbaddr, sizeof(fbaddr));
if (fbaddr == 0)
OF_interpret("frame-buffer-adr", 0, 1, &fbaddr);
if (fbaddr != 0) {
pmap_extract(pmap_kernel(), fbaddr, &fbpa);
#ifdef DEBUG
printf("membase: %lx fbpa: %lx\n", (unsigned long)mem_base,
(unsigned long)fbpa);
#endif
if (mem_base == 0) {
/* XXX this is guesswork */
fboffset = (uint32_t)(fbpa & 0xffffffff);
}
fboffset = (uint32_t)(fbpa - mem_base);
prop_dictionary_set_uint32(dict, "address", fboffset);
}
of_to_dataprop(dict, console_node, "EDID", "EDID");
temp = 0;
if (OF_getprop(console_node, "ATY,RefCLK", &temp, sizeof(temp)) != 4) {
OF_getprop(OF_parent(console_node), "ATY,RefCLK", &temp,
sizeof(temp));
}
if (temp != 0)
prop_dictionary_set_uint32(dict, "refclk", temp / 10);
/*
* finally, let's see if there's a video mode specified in
* output-device and pass it on so drivers like radeonfb
* can do their thing
*/
options = OF_finddevice("/options");
if ((options == 0) || (options == -1))
return;
if (OF_getprop(options, "output-device", output_device, 256) == 0)
return;
printf("output-device: %s\n", output_device);
/* find the mode string if there is one */
pos = strstr(output_device, ":r");
if (pos == NULL)
return;
prop_dictionary_set_cstring(dict, "videomode", pos + 2);
}
void
copy_disp_props(struct device *dev, int node, prop_dictionary_t dict)
{
uint32_t temp;
uint64_t cmap_cb;
if (node != console_node) {
/*
* see if any child matches since OF attaches nodes for
* each head and /chosen/stdout points to the head
* rather than the device itself in this case
*/
int sub;
sub = OF_child(node);
while ((sub != 0) && (sub != console_node)) {
sub = OF_peer(sub);
}
if (sub != console_node)
return;
node = sub;
}
prop_dictionary_set_bool(dict, "is_console", 1);
if (!of_to_uint32_prop(dict, node, "width", "width")) {
OF_interpret("screen-width", 0, 1, &temp);
prop_dictionary_set_uint32(dict, "width", temp);
}
if (!of_to_uint32_prop(dict, node, "height", "height")) {
OF_interpret("screen-height", 0, 1, &temp);
prop_dictionary_set_uint32(dict, "height", temp);
}
of_to_uint32_prop(dict, node, "linebytes", "linebytes");
if (!of_to_uint32_prop(dict, node, "depth", "depth")) {
/*
* XXX we should check linebytes vs. width but those
* FBs that don't have a depth property ( /chaos/control... )
* won't have linebytes either
*/
prop_dictionary_set_uint32(dict, "depth", 8);
}
if (!of_to_uint32_prop(dict, node, "address", "address")) {
uint32_t fbaddr = 0;
OF_interpret("frame-buffer-adr", 0, 1, &fbaddr);
if (fbaddr != 0)
prop_dictionary_set_uint32(dict, "address", fbaddr);
}
of_to_dataprop(dict, node, "EDID", "EDID");
add_model_specifics(dict);
temp = 0;
if (OF_getprop(node, "ATY,RefCLK", &temp, sizeof(temp)) != 4) {
OF_getprop(OF_parent(node), "ATY,RefCLK", &temp,
sizeof(temp));
}
if (temp != 0)
prop_dictionary_set_uint32(dict, "refclk", temp / 10);
gfb_cb.gcc_cookie = (void *)console_instance;
gfb_cb.gcc_set_mapreg = of_set_palette;
cmap_cb = (uint64_t)&gfb_cb;
prop_dictionary_set_uint64(dict, "cmap_callback", cmap_cb);
}