static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
{
struct omap2430_glue *glue = container_of(mailbox_work,
struct omap2430_glue, omap_musb_mailbox_work);
omap_musb_set_mailbox(glue);
}
static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
{
struct omap2430_glue *glue = container_of(mailbox_work,
struct omap2430_glue, omap_musb_mailbox_work);
struct musb *musb = glue_to_musb(glue);
struct device *dev = musb->controller;
pm_runtime_get_sync(dev);
omap_musb_set_mailbox(glue);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
static int omap2430_musb_init(struct musb *musb)
{
u32 l;
int status = 0;
struct device *dev = musb->controller;
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
struct musb_hdrc_platform_data *plat = dev->platform_data;
struct omap_musb_board_data *data = plat->board_data;
/* We require some kind of external transceiver, hooked
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
*/
if (dev->parent->of_node)
musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
"usb-phy", 0);
else
musb->xceiv = devm_usb_get_phy_dev(dev, 0);
if (IS_ERR(musb->xceiv)) {
status = PTR_ERR(musb->xceiv);
if (status == -ENXIO)
return status;
pr_err("HS USB OTG: no transceiver configured\n");
return -EPROBE_DEFER;
}
musb->isr = omap2430_musb_interrupt;
status = pm_runtime_get_sync(dev);
if (status < 0) {
dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
goto err1;
}
l = musb_readl(musb->mregs, OTG_INTERFSEL);
if (data->interface_type == MUSB_INTERFACE_UTMI) {
/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
l &= ~ULPI_12PIN; /* Disable ULPI */
l |= UTMI_8BIT; /* Enable UTMI */
} else {
l |= ULPI_12PIN;
}
musb_writel(musb->mregs, OTG_INTERFSEL, l);
pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
"sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
musb_readl(musb->mregs, OTG_REVISION),
musb_readl(musb->mregs, OTG_SYSCONFIG),
musb_readl(musb->mregs, OTG_SYSSTATUS),
musb_readl(musb->mregs, OTG_INTERFSEL),
musb_readl(musb->mregs, OTG_SIMENABLE));
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
if (glue->status != OMAP_MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);
usb_phy_init(musb->xceiv);
pm_runtime_put_noidle(musb->controller);
return 0;
err1:
return status;
}
static int omap2430_musb_init(struct musb *musb)
{
u32 l;
int status = 0;
struct device *dev = musb->controller;
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
struct omap_musb_board_data *data = plat->board_data;
/* We require some kind of external transceiver, hooked
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
*/
if (dev->parent->of_node) {
musb->phy = devm_phy_get(dev->parent, "usb2-phy");
/* We can't totally remove musb->xceiv as of now because
* musb core uses xceiv.state and xceiv.otg. Once we have
* a separate state machine to handle otg, these can be moved
* out of xceiv and then we can start using the generic PHY
* framework
*/
musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
"usb-phy", 0);
} else {
musb->xceiv = devm_usb_get_phy_dev(dev, 0);
musb->phy = devm_phy_get(dev, "usb");
}
if (IS_ERR(musb->xceiv)) {
status = PTR_ERR(musb->xceiv);
if (status == -ENXIO)
return status;
dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
return -EPROBE_DEFER;
}
if (IS_ERR(musb->phy)) {
dev_err(dev, "HS USB OTG: no PHY configured\n");
return PTR_ERR(musb->phy);
}
musb->isr = omap2430_musb_interrupt;
phy_init(musb->phy);
phy_power_on(musb->phy);
l = musb_readl(musb->mregs, OTG_INTERFSEL);
if (data->interface_type == MUSB_INTERFACE_UTMI) {
/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
l &= ~ULPI_12PIN; /* Disable ULPI */
l |= UTMI_8BIT; /* Enable UTMI */
} else {
l |= ULPI_12PIN;
}
musb_writel(musb->mregs, OTG_INTERFSEL, l);
dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
"sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
musb_readl(musb->mregs, OTG_REVISION),
musb_readl(musb->mregs, OTG_SYSCONFIG),
musb_readl(musb->mregs, OTG_SYSSTATUS),
musb_readl(musb->mregs, OTG_INTERFSEL),
musb_readl(musb->mregs, OTG_SIMENABLE));
if (glue->status != MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);
return 0;
}
