/*
* \brief Read interrupt info from FW
*
* \param hFwEvent - FwEvent Driver handle
* \return void
*
* \par Description
*
* Indicate the TwIf that HW is available and initiate transactions for reading
* the Interrupt status and the FW status.
*
* \sa
*/
static ETxnStatus fwEvent_SmReadIntrInfo (TfwEvent *pFwEvent)
{
ETxnStatus eStatus;
CL_TRACE_START_L4();
#ifdef HOST_INTR_MODE_EDGE
/* Acknowledge the host interrupt for EDGE mode (must be before HINT_STT_CLR register clear on read) */
os_InterruptServiced (pFwEvent->hOs);
#endif
/* Indicate that the chip is awake (since it interrupted us) */
twIf_HwAvailable(pFwEvent->hTwIf);
/*
* Read FW-Status structure from HW ==> Special mapping, see note!!
*
* Note: This structure actually includes two separate areas in the FW:
* 1) Interrupt-Status register - a 32 bit register (clear on read).
* 2) FW-Status structure - 64 bytes memory area
* The two areas are read in a single transaction thanks to a special memory
* partition that maps them as contiguous memory.
*/
TXN_FW_EVENT_SET_FW_STAT_ADDR(pFwEvent)
eStatus = twIf_TransactReadFWStatus (pFwEvent->hTwIf, &(pFwEvent->tFwStatusTxn.tTxnStruct));
CL_TRACE_END_L4("tiwlan_drv.ko", "CONTEXT", "FwEvent", "");
/* Return the status of the FwStatus read (complete, pending or error) */
return eStatus;
}
/*
* \brief Handle the Fw Status information
*
* \param hFwEvent - FwEvent Driver handle
* \return void
*
* \par Description
* This function is called from fwEvent_Handle on a sync read, or from TwIf as a CB on an async read.
* It calls fwEvent_CallHandlers to handle the triggered interrupts.
*
* \sa fwEvent_Handle
*/
static ETxnStatus fwEvent_SmHandleEvents (TfwEvent *pFwEvent)
{
ETxnStatus eStatus;
CL_TRACE_START_L4();
/* Save delta between driver and FW time (needed for Tx packets lifetime) */
pFwEvent->uFwTimeOffset = (os_timeStampMs (pFwEvent->hOs) * 1000) -
ENDIAN_HANDLE_LONG (pFwEvent->tFwStatusTxn.tFwStatus.fwLocalTime);
#ifdef HOST_INTR_MODE_LEVEL
/* Acknowledge the host interrupt for LEVEL mode (must be after HINT_STT_CLR register clear on read) */
os_InterruptServiced (pFwEvent->hOs);
#endif
/* Save the interrupts status retreived from the FW */
pFwEvent->uEventVector = pFwEvent->tFwStatusTxn.tFwStatus.intrStatus;
/* Mask unwanted interrupts */
pFwEvent->uEventVector &= pFwEvent->uEventMask;
/* Call the interrupts handlers */
eStatus = fwEvent_CallHandlers (pFwEvent);
TRACE5(pFwEvent->hReport, REPORT_SEVERITY_INFORMATION, "fwEvent_SmHandleEvents: Status=%d, EventVector=0x%x, IntrPending=%d, NumPendHndlrs=%d, FwTimeOfst=%d\n", eStatus, pFwEvent->uEventVector, pFwEvent->bIntrPending, pFwEvent->uNumPendHndlrs, pFwEvent->uFwTimeOffset);
CL_TRACE_END_L4("tiwlan_drv.ko", "CONTEXT", "FwEvent", "");
/* Return the status of the handlers processing (complete, pending or error) */
return eStatus;
}
/*
* \brief Handle the Fw Status information
*
* \param hFwEvent - FwEvent Driver handle
* \return void
*
* \par Description
* This function is called from fwEvent_Handle on a sync read, or from TwIf as a CB on an async read.
* It calls fwEvent_CallHandlers to handle the triggered interrupts.
*
* \sa fwEvent_Handle
*/
static ETxnStatus fwEvent_SmHandleEvents (TfwEvent *pFwEvent)
{
ETxnStatus eStatus;
/* Save delta between driver and FW time (needed for Tx packets lifetime) */
pFwEvent->uFwTimeOffset = (os_timeStampMs (pFwEvent->hOs) * 1000) -
ENDIAN_HANDLE_LONG (pFwEvent->tFwStatusTxn.tFwStatus.fwLocalTime);
#ifdef HOST_INTR_MODE_LEVEL
/* Acknowledge the host interrupt for LEVEL mode (must be after HINT_STT_CLR register clear on read) */
os_InterruptServiced (pFwEvent->hOs);
#endif
/* Save the interrupts status retreived from the FW */
pFwEvent->uEventVector = pFwEvent->tFwStatusTxn.tFwStatus.intrStatus;
/* Mask unwanted interrupts */
pFwEvent->uEventVector &= pFwEvent->uEventMask;
/* Call the interrupts handlers */
eStatus = fwEvent_CallHandlers (pFwEvent);
/* Return the status of the handlers processing (complete, pending or error) */
return eStatus;
}
